fickle wigeon
I have installed a new board = JHEMCU GHF745AIO.
First test flight around 2min, everything was ok. after that now always comes Core temperature warning (temperature rises and rises) and after about 30 sec the board turns off. is no matter which BF version 4.4 or 4.5 RC1-3
CPU utilization in the Configurator is 27-30%
what can this be?
board_name JHEMCUF745 <<< i asked which target i have to flash, because in the configurator JHEMCUF745 is not listed, i should take JHEMF745.
pale shadow
Check to see if you have a short on the 5v rail.
fickle wigeon
i dont see one. as it is here in the picture, the core goes up immediately
brittle kernel
I have installed a new board = JHEMCU GHF745AIO.
First test flight around 2min...
is it overheats if not armed?
fickle wigeon
at disarm it is 54 celsius, when armed, goes straight more up