Hi guys, I have a 7” custom fpv build and I’m using an O3 air unit for RX and TX. I’ve linked the DJI controller 2 to the O3 air unit but can’t register any inputs on betaflight. Assuming I have a config issue but not sure where?
#DJI controller 2 not showing inputs on betaflight
topaz nimbus
topaz nimbus
did you solder sbus port also?
I'm using this plug
placid wyvern
I cant see exactly wires but if its plug dedicated to dji should be fine
so show your ports and receiver tab
and what fc it is?
velox cine I see
you should have serial rx on uart1
topaz nimbus
I didn't, I'll try now.
topaz nimbus
you should have serial rx on uart1
Thank you mate you've sorted me out
placid wyvern
np, so you can mark thread as solved
lost storm
you should have serial rx on uart1
I am having problems connecting my dji remote controller 2 to cinelog 20... The inputs are not working in BetaFlight.. But if i push record on controller, it will record video.. so it is connected.. just the roll, pitch, yaw, throttle are not being activated... any ideas? Thanks.
placid wyvern
I am having problems connecting my dji remote controller 2 to cinelog 20... The ...
what is your vtx? do you have sbus (from vtx) connected to fc? and show me your receiver tab
lost storm
what is your vtx? do you have sbus (from vtx) connected to fc? and show me your ...
Thanks onlyn1ght
placid wyvern
how you connected vtx to fc and what kind exactly they are?
btw disable RSSI_ADC
@lost storm
lost storm
how you connected vtx to fc and what kind exactly they are?
This is the drone. cinelog20. i have the 03 air unit.. https://geprc.com/wp-content/uploads/2022/05/F411-35A-AIO-USER-MANUAL2.pdf
lost storm
btw disable RSSI_ADC
Done. thanks.
placid wyvern
This is the drone. cinelog20. i have the 03 air unit.. https://geprc.com/wp-cont...
how you wired them?
lost storm
Wiring is stock.
placid wyvern
and do you have serialrx on uart 2?
lost storm
and do you have serialrx on uart 2?
yes
placid wyvern
Wiring is stock.
so where you buy it?
lost storm
so where you buy it?
geprc
placid wyvern
hmm
placid wyvern
Thanks onlyn1ght
turn on telemetry
placid wyvern
do you have updated everything in dji assisant?
lost storm
yes.. drone and remote for sure... i think goggles integra are updated as well... i can double check on the goggles..
if i want to record something, i push record on the remote.. and it records what drone sees..
i can update goggles.. will do now..
placid wyvern
can you see inside the drone how its o3 wired?
if its PNP version, probably sbus port from o3 is not wired to fc
you chose PNP version?
@lost storm
lost storm
it is pnp version
lost storm
Trying to find how i can check it..
lost storm
I think SBUS is wired to flight controller.
placid wyvern
you think or you know?
lost storm
I know.
placid wyvern
lost storm
HAhahhahahahahahahhha
lost storm
show it, that would be best
Green wire.
placid wyvern
Green wire.
yeah, and it end is where?
lost storm
picture on left is the fc. picture on the right is the o2 air unit.
placid wyvern
hmm
lost storm
😯 I think it's working! the goggle update might have been the thing holding the process back!
lost storm
no... false alarm.. still no change in the throttle or roll.. no reaction in betaflight when i move the sticks..
placid wyvern
hahah
