violet mulch
Hi guys, BF Configurator 10.10 cannot auto detect this AIO. https://www.axisflying.com/Axisflying-Argus-F7-AIO-F722-40A-with-Aluminum-shell-p4853437.html
Configurator has detected the board: AXISFLYINGARGUSF7AIO but no official Betaflight target was found
Is there a way to add it? It's being shipped with 4.5.0 pre-installed but Axisflying themselves to not seem to provide the binary anywhere.
Can I just post name/device ID, dump etc. at Github as request?
dull ingot
argusf7aio
violet mulch
argusf7aio
does this have the bmi or icm gyro?
dull ingot
does this have the bmi or icm gyro?
it could have any of them - depends on version
violet mulch
no, I meant the argusf7aio target. but I see in the config.h that it has both. My AIO uses icm which gives me headaches because gyro is noisy and makes the quad twitch mid air 😩
dull ingot
no, I meant the argusf7aio target. but I see in the config.h that it has both. M...
update to 4.5 first
then send us 2k logs
violet mulch
its on 4.5 already (but pre-installed). got 4k logs if that is ok.
i guess that gyro data is not normal in slow turns. quad is mechanically sound and was flying fine with a mamba stack previously
dull ingot
4k is too much and could hang stm. make 2k log it has enought data, enable please rpm field/
dull ingot
i guess that gyro data is not normal in slow turns. quad is mechanically sound a...
this area is strange but doesn't looks like faulty gyro
violet mulch
not sure, couldn't test really hard, but it seemed to fly better on 2k blackbox. that reminded me, that when I put the logging to 8k ealier, the drone would behave strangely. disarming would take 1 second or more... maybe logging level does indeed influence flight performance in this case?
dull ingot
not sure, couldn't test really hard, but it seemed to fly better on 2k blackbox....
you shouldn't use more than 2k for f722 logging is quite intensive task and higher rates will overload stm
violet mulch
good to know, I assumed f7 can handle it, because I also assumed f7 is a faster processor. thanks, I'll keep an eye out for it and report back
dull ingot
also I asked you to enable disabled fields, but it doesn't matter now, I don't see any major problems other than suboptimal PIDs
dull ingot
good to know, I assumed f7 can handle it, because I also assumed f7 is a faster ...
generally there is nothing to log higher than 2kHz