Firmware is not supported, please upgrade to 1.41.0 but I'd rather download an old version of the configurator. Problem is I have no idea how and which to use. Has cc3d sp f3 cleanflight. I can at least get it to connect unlike my Hyperion vengeance drone. Running windows 10 pro and both quads show up under "other devices" first is pci devices, second is unknown along with the third. I'm just lost using GitHub and I've tried installing drivers that betaflight recommended. Please help!
#maytech/dys x130 drone help!
limber mulch
cyan perch
Those boards are very old and no longer supported. Your best bet is to try an older configurator version, maybe 10.5 or older
limber mulch
Thanks vitroid...I figured out how to get them both hooked to a laptop. I used an old version of chromium and 1.2.4v of cleanflight. I now have another issue. I have a turnigy evolution pro that come with the tgy-ia6c which is ppm/sbus. I can't figure out how to hook up sbus to either to get them working. The Hyperion vengeance has three servo pins for futaba style sbus along with a switch and have it setup in the radio to sbus but still no go. The instructions show a section I dont have in cleanflight that has me choose which style rx I'm using. I'm getting a tgy ia6b Rx with pcm in the mail. Just wish I could use this sbus one.
cyan perch
Thanks vitroid...I figured out how to get them both hooked to a laptop. I used a...
this stuff is well before even my time in the hobby, I can try to help but I can only go back to ~2019 when it comes to knowledge