- Flight controller does work.
- Cable works.
- I'm on Windows 11.
Not sure why it does noty show up in the serial port.
#Cinelog20 does not show up in serial port on Betaflight.
hot orchid
lunar root
- Flight controller does work.
- Cable works.
- I'm on Windows 11.
Not sure why...
do you have the version with a DJI Air Unit?
hot orchid
I do
lunar root
what specific cable are you using?
hot orchid
a usb to usb-c it's the only one that fits to the flight controller (03) unit
lunar root
yeah...
the O3 Air Unit is not a flight controller
it's only a video transmitter, video recorder, and potentially a radio receiver
but not a flight controller
there should be a different board in the drone with a USB Micro B port
hot orchid
so what would the flight controller be? like my DJI controller?
lunar root
read message above
hot orchid
shit, im not seeing another usbc port, its going directly in the middle of the drone
wait i think you're right
lunar root
shit, im not seeing another usbc port, its going directly in the middle of the d...
no USB C
USB Micro B
hot orchid
yep thats the one I just found, plugged in a micro usb and the drone lights up, but BF still won't read it
lunar root
are you sure you're using a USB cable that can carry data?
hot orchid
that's what i'm thinking it may be, but wouldn't the flight controller not light up if it's a charge only cable?
lunar root
that's what i'm thinking it may be, but wouldn't the flight controller not light...
I mean... it will light up when its given power
what is a charge-only cable if not a cable that only carries power and no data
hot orchid
yeah i'm thinking thats what it may be
took a look at the manual too and it says i need to activate using DJI Assistant 2, think that could be it?
hot orchid
gotcha, another think I was thinking was maybe to grab a usbc to micro usb to plug it into the back of my PC' usb-c port instead of through the USB port if that make sense