O3 Turning of when doing flips and other manouvers

[clever blade]

hello guys. Iam having a strange problem in mi quad. I am using a tmotor f7 mini 45A. on a 3.5 inch build with an o3 and 1507 4100kv motors 4s batery. Thing is that when i flip and do some freestyle i loose video and the drrone failsafe to the ground. i have attached a video for you ro see. What could be causing this problem? on mi stack i have a panasonic capacitor 470uf. thanks and btw mi fc and esc are conformal coatedd with worry free. thanks for the help

[deep oxide]

Have you checked all the connections to make sure nothing is loose?

Is it possible that the VTX is not getting enough power?

Does it failsafe if you just punch the throttle too, or is it only happening when you flip/roll?

[clever blade]

This was with cables solder to fc power to 10v pad stack t motor f7 mini

Nothing loose, dji o3 HD cable is ok

[clever blade]

It happened when fliping

[deep oxide]

I may be wrong, but this 'feels' like something mechanical to me. Unless you have a gyro doing something weird when the quad inverts.

Thinking about it. it's not a desync is it - and not a failsafe?

Looking at the video, does it stop at the point that it failsafes? I reckon this is a power/connection issue. When you pick the quad up off the ground, is the VTX still on?

So many questions...

[runic spade]

Check youre connector its probably loose

Failsave means no power (no connection)

If youre flying

[clever blade]

When i pick it up the quad is on, and o3 have bien reseted.

[deep oxide]

I think this is a loose connection.

[clever blade]

O3 to fc connector? Now i have solder it yo vbat, iam going to try just now

[deep oxide]

Can you make it do it just by holding the quad and turning it upside down?

Take the props off, arm it, then turn it upside down and shake it around to see if it happens.

[clever blade]

Ok i Will try that now before going to fly

[runic spade]

I mean youre batery connector!!! How does it go in each other???

[clever blade]

I have done the moment of the quad without props and it's ok. But if i do yo mucho sudden movmebts ive got an flyaway message on the googles

[clever blade]

With an xt 30

Battery conector it's ok, i have it with a Panasonic capacitor low esr 470uf

[runic spade]

check the solderd wires

[clever blade]

the solder of the cables on the fc?

[runic spade]

on youre power connector

[clever blade]

@deep oxide @runic spade i have just flight 3 batteries, one of those only flips and roll, and 0 problem, the other 2 some hard freestyle and no problem either...could be considered as it is ok? thanks guys!

[runic spade]

Ok could be connectors fualt

[clever blade]

its looks like its repair?

[runic spade]

hopefully it is