#Fly Problem

1 messages · Page 1 of 1 (latest)

latent tide
#

Hello, I hope someone here can help me with my problem. I don't speak English very well, so I use a translator. My problem is the following if I put the stick near the front of my remote control then the drone also flies forward so far so well. However, if I let the stick go back to the middle position, the drone flies without braking or the same, I thought that if I move the stick to the middle position, the drone would also stop and hover. I'm sure it's just a matter of settings, but I can't find this point in the settings.

reef bough
#

https://www.vitroidfpv.com/faq/flightModes

VitroidFPV
FAQ - What are the different flight modes?

There are four main ones that you should be familiar with. Angle, Horizon, Acro, and Acro Trainer

Angle - The radio stick position changes the angle of the quad, so a full stick forward on pitch will tilt the quad, say, 30 degrees forwards, and not more. When the stick is returned to center, the quad should too
Horizon - Acts like angle mode, b...

void viper
#

I thought that if I move the stick to the middle position, the drone would also stop and hover.
This is also an unrealistic expectation for hobby (vs camera) drones. This is indeed how camera drones work, but not what we fly

reef bough
#

You're expecting the behavior of Angle mode, but the drone is in Acro mode by default

#

you can assign a switch to enable Angle mode, or (what I'd much rather recommend) actually learn Acro mode

latent tide
#

how can i set the angle mode because i think this is the mode i was looking for? And thanks for the quick reply

reef bough
#

I would really recommend just sticking to acro

#

since that's basically the standard

latent tide
#

ok thxs