hi guys, i got my first fpv drone, i have set up modes in beta flight, they seem to be working (indicated via a flashing ligjht on my drone when i do something on the controller) but nothing actually happens, anyone got a clue whats happening?
#drone is not doing anything, even though it is clearly recieving singals
flint dagger
and yes, i have configured the reciever section, it is recieving all my inputs
pls can someone help if they know whats wrong
tiny harbor
pls can someone help if they know whats wrong
when you were recording the video, were you still connected into the Configurator?
flint dagger
yes but it doesnt work not connected too
does the same thing
when powered and not connected via usb
flint dagger
status
MCU F722 Clock=216MHz, Vref=3.28V, Core temp=62degC
Stack size: 2048, Stack address: 0x20010000
Configuration: CONFIGURED, size: 3644, max available: 16384
Devices detected: SPI:1, I2C:0
Gyros detected: gyro 1 locked dma
GYRO=BMI270, ACC=BMI270
OSD: MAX7456 (30 x 13)
BUILD KEY: 3adeb009d23fc06107523abc6701f0c4 (4.4.1)
System Uptime: 85 seconds, Current Time: 2023-05-27T16:38:06.794+00:00
CPU:13%, cycle time: 318, GYRO rate: 3144, RX rate: 150, System rate: 9
Voltage: 1492 * 0.01V (4S battery - OK)
I2C Errors: 0
FLASH: JEDEC ID=0x00ef4019 32M
Arming disable flags: THROTTLE CLI MSP ARMSWITCH
im using tbs crossfire btw
and tbs mambo
flint dagger
yes
ignore the errors btw
i j redid it
and now it says
THROTTLE MSP ARM_SWITCH
tiny harbor
configuration tab
tiny harbor
your beeper is likely not going off because of this
as for arming, you need to have the throttle all the way down
that's what the THROTTLE flag means
flint dagger
as for arming, you need to have the throttle all the way down
where do i find thgis
this
sorry im really new to this
tiny harbor
about middle right in the first screenshot
flint dagger
both values are 0 though
tiny harbor
oh wait sorry I misread that, keep switching between multiple conversations lol
flint dagger
its fine haha
tiny harbor
you need to have the throttle stick all the way down
flint dagger
when arming?
tiny harbor
then get a screenshot of the values in the receiver tab
tiny harbor
okay
disconnect from the configurator, put the throttle all the way down, and try arming
flint dagger
no nothing is happening
omg its working
but all my values r totally fucked up
because surely when your throttle is all the way down, your motors should stop completely right
tiny harbor
because surely when your throttle is all the way down, your motors should stop c...
well not necessarily
the motors should spin a little when throttle is all the way down, this is generally for the quad to maintain control