Receiver input problem in Betaflight (no stick imputs)

[sterile nimbus]

Hello,

I'm a beginner in FPV drone and I'm currently building my first FPV drone. I'm having an issue with the input from my radio controller in Betaflight and I would appreciate your help in resolving this issue.

Here are the components I'm using:

Flight Controller: RevoltFC v3
ESCs: XRotor Micro 40A 4 in 1 BLHeli_S DShot600
Receiver: R-XSR FrSky
Radio Controller: Taranis X9 Lite
I have connected all the components according to the manual instructions and I have configured my radio controller. However, I'm not getting any input from my radio controller in the radio tab in Betaflight. I have checked that my radio controller is connected to my R-XSR receiver and that it is powered.

I'm not sure what I'm doing wrong and I would appreciate any suggestions or solutions you might have to help me resolve this issue.

Thank you in advance for your help.
(look images for my taranis settings, taranis drone settings, bettaflights settings, diagram of drone connections)

Receiver input problem in Betaflight (no stick imputs)

[ionic harbor]

Move the SBUS wire from the receiver to an RX pad instead of a TX pad

[sterile nimbus]

ok I will test it later, thanks in advance

[boreal timber]

Have you bound the receiver correctly? Or has it worked to bind because then you can be sure that you don´t have the wrong firmware on the receiver (ACCESS, ACCST)

[sterile nimbus]

I have upgrade the firmwares of my Radio, Internal Transmitter and R-XSR, I have put the SBUS wire on RX3, test all Uarts and it didn't work ...