#Flywoo F411v2 target Barometer not working with BF4.4

1 messages · Page 1 of 1 (latest)

tribal belfry
#

Hello,
i am currently trying to flash my Flywoo explorer to BF4.4 to get the improved GPS Rescue. No matter what i do, i cant seem to get the barometer to work with cloudbuild.
Target: flywoof411v2.
support id:
ID: "8720f6dd-0697-46f3-8473-2f7badbebd0a"

What i tried so far?
If i flash core the baro is recognized, so i assume my hardware is fine!
If i flash the normal 4.4 Build I cannot activate the Baro and the Slider turns back off, everytime i press "save and reboot". If i type "baro" "get baro" or something similar in the CLi tab, there is no output, so i assume the Baro is somehow missing from the Target using cloud build.
Even if I include ALL the (baro) custom defines from the releases page nothing changes. 😦

tribal belfry
#

I just flashed back to 4.3.2 and the Baro works as well. so its a 4.4 Problem

latent sand
dull burrow
#

Post the output of status from your working 4.3.2 config

grave stump
tribal belfry
tribal belfry
grave stump
#

@tribal belfry have to wait until PR's are merged

tribal belfry
# dull burrow Post the output of `status` from your working 4.3.2 config

status

MCU F411 Clock=108MHz (PLLP-HSE), Vref=3.30V, Core temp=35degC
Stack size: 2048, Stack address: 0x2001fff0
Configuration: CONFIGURED, size: 3994, max available: 16384
Devices detected: SPI:1, I2C:1
Gyros detected: gyro 1 locked dma
GYRO=MPU6000, ACC=MPU6000, BARO=BMP280
OSD: MAX7456
System Uptime: 40 seconds, Current Time: 2023-03-15T20:44:54.352+00:00
CPU:25%, cycle time: 125, GYRO rate: 8000, RX rate: 15, System rate: 9
Voltage: 1 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 0
SD card: Not configured
Arming disable flags: RXLOSS CLI MSP MOTOR_PROTO

tribal belfry
#

Thanks a lot all of you!!! I just flashed the merged version and it works like a charm!!!

#

The last question i am eager to know. Why didnt it work to put the BMP280 into the custom defines. I thought thats exactly what the are here for.... 🙂

Thanks a lot again!!!

grave stump
jovial sail
#

IDK but I know we are fixing all this stuff up. We had no clue how many targets were misconfigured!
Really glad to be able to help!
Have fun!

vast sun
#

Where can i find the merged version? I have the same problem.

bleak mauve
#

Hey guys, im having a similar issue here with the cineape25, no baro showing

grave stump
bleak mauve
#

even in the core the baro doesnt show up

#

lol found out why

#

there aint no barometer in the spot where theres meant to be one

#

the solder pads are there but no componants

#

sheeeeeesh

grave stump
#

RMA?

bleak mauve
#

sorry what does that mean

grave stump
#

Return Material Authorization being the old term.

https://en.wikipedia.org/wiki/Return_merchandise_authorization

Return merchandise authorization

A return merchandise authorization (RMA), return authorization (RA) or return goods authorization (RGA) is a part of the process of returning a product to receive a refund, replacement, or repair during the product's warranty period. Both parties can decide how to deal with it, which could be refund, replacement or repair.The issuance of an RMA/...

bleak mauve
#

ahh

#

sorry