LOGIC HELP

[dense moss]

How many numbers? I could easily tell you how to make one. Number slot machines are very easy.

[normal latch]

i want 3 numbers

[dense moss]

This may look like a lot, but it’s really not that bad. It is written out step by step. Just go slow, and follow the steps, one by one.

So you’ll need:

1x donator, 3x calculator, 3x randomizer, 4x relay, 5x number interface, 3x AND gate, 3x Interactor, 3x memory cell, 3 seven segment displays. 1x number combiner.

First place donator, and place a wire from donator to RIGHT INPUT of relay. Then connect a number interface to the LEFT INPUT of relay. Set the number to 8.

Place 3 randomizers. Connect the output of the relay to all the randomizers, then place a calculator set to ADD after each randomizer (should be 3) and connect a wire to the LEFT INPUT (from randomizer to calculator)

Place your 3 memory cells after the calculators, one for each.

Connect a wire from the calculator to the RIGHT SIDE of the memory cell FIRST

Then connect a wire from the calculator to the LEFT SIDE of the memory cell SECOND. (Yes there should be 2 wires)

Place a number interface next to the calculators, and set it to 1. Connect it to all 3 of the calculators RIGHT INPUTS.

After this connect the memory cell into its own seven segment display.

FOR WIN DETECTION

Place a number combiner. Look at side where the 5 inputs are facing you. Connect your first memory cell into the 3RD INPUT, the second memory cell into the 4TH INPUT, and the third memory cell into the 5TH INPUT. (From left to right)

After place 3 AND gates. Connect one input of each AND gate to the output of the number combiner.

Then place a number interface over each AND gate. You will set one winning number in each. (From 111-999)

After each AND gate place a relay. Connect the AND gate to the RIGHT INPUT of the relay.

Then connect a wire from the number interface that is set to one (next to the calculators) into all of the LEFT INPUTS of the relays. Then connect the relay to a interactor.

Set interactor around a drawer and boom.

[normal latch]

i watched a vid to make it and i re did it like 8 times and i did it perfecly but whenever i used the atm a few times it auto outputed the item when it was only ment to be outputted when it hits 777

[dense moss]

If you follow my instructions you will get a basic system that will have no flaw.

Just not the most exciting

[normal latch]

ok thanks ill do it in a bit ill let u know if it works