#R&R LOGIC
1 messages · Page 1 of 1 (latest)
do u have any unloaders that are alrdy built?
Wdym already built
like that you could show as an example
cause im lf one
unless u got like smth already built I can see and make a decision from
Yeah i do have one
if that makes sense
is it possible to send video of it ?
kk
@ashen flame
its really cheap
to make
except for the storage drawer
Works fairly well
Sometimes a couple ores will get out because of the alignment conveyor being garbage
It doesnt jam up but stuff falls out because of the alignment conveyor pushing the ores up above the refiner
Hi, are u able to make like a service button that notifies me that someone has pressed it, i basically want a button in my shop that people can press if they want me
Rn if ure available
Alr np
@quick inlet can you join me
my user is rxb0n
Ill charge less for this cus its a really simple setup
Sorry, my friend told me how to do it just now mb but thanks though
alright no problem
b
@river tide . What’s the most complex system your able to produce?
around like anything you can imagine within the games logic system
Could you make a working spin wheel type thing?
like a
roulette wheel?
@fleet cliff
this thing
if it is that, i can very well do the logic for it
however the wheel itself is the hard part, a visually spinning roulette wheel isnt something i can do
thats a build problem rather than a logic one
b
@river tide
Hello
could u make me if u can an unloader and loader together? for the freyliner
Sure, could we do it tomorrow though, i have to get off rn
sure
whats your timezone?
uh
i searched and its clt or the chilean one
itll have to be at like 16:00 cuz im occupied before that
same
@tough temple would you be fine doing 50k for the autounloader and loader?
ok
Alright
if u wanna add me for tomorrow its benjamin7riv
when i can can i @ you in oak general tomorrow?
Whenever you get free time, i check my notifications quite often and ill respond if im free or not
ok
ok thx inore
np
inore can you do the autounloader and loader rn or are you occupied?
i want minsweeper lcd touchable like the real game in game
minesweeper
able to flag and dig , everything
@river tide could you do the autounloader and loader rn or are u occupied?
i could do it after school today
i was preoccupied with personal issues sorry about that
like full 9x9 square?
that would be quite expensive
Ill play around with the logic to see if its even possible
I dont think thats possible
ill see though im back from school right now and i have the while weekends to play around
@tough temple when are u able to hop on
@inore i was occupied with an academy today
@river tide
sorry i couldnt hop on
tomorrow at my time like at 9 am i gotta to to that academy and i get home at like 2 pm so if at like 3 pm my time youre free ill do it
also i dont have discord on my phone so i couldnt see that
lemme install it
yeah ofcourse
@river tide hey
hello
ofcourse
could you join me? @tough temple
my username is rxb0n
wait i crashed
K
Join ill join in abit
Join me my user is benjamin7riv
@inore
Inore its gunna have to be later cuz i have to do a presentation rn
Ill lell yoy when im ready
Ill pay u 75k for da delay
Yeah sure
@river tide hello
I would love to comission a small logic work if its possible
In Number 1 , when a truck or a car full of trees log , or even a full tree drops in , a conveyor will start moving it to number 2 , where its full of buzzsaw where it will cut it to small logs ( sander friendly ) then sends it to number 3 where it will send it to number 4 where its a box that stores wood logs i was wondering if whenever the logs are stored in the box , it goes up , then goes in a small conveyor , then goes in a box again , then sends it up again
Tdlr : all i want is a tree cutter machine , you can design it in your way if you know how , all i want it to do is to transfer logs all the way up and it pops over here
interesting
you are free to design however you want , money isnt an issue
I havent really messed with bandsaws much and i dont know how to use them efficiently but i can fully automate the conveyors and detection
issue is that storage boxes dont have anything to detect whether its full or not
Is there a way for it to auto output it ?
It doesnt need to be full or not, i just want it to transfer the logs and almost phase through the walls until it spawns on top of the conveyor
i could very easily do the stuff which can pack everything into boxes and then send it out on a conveyor to wherever your heart desires but i dont think theres a reliable way to refill the storage boxes you mentioned previously
Hold on
are you talking about these
or these?
The one on top
this one
Yes
as seen in the picture, the logs stores in number 4 , then it sends it up , then goes to a storage box number 7 then it pops up on top of the coveyor
number 3 is supposed to be conveyors sending cutted logs towards number 4
number 2 can be a hole or something which cut trees
i tried doing a hole full of bandsaws, but it was just a noise hell
and especially it keeps glitch stuck in the bandsaw
its gonna be a noise hell either way sadly
you can take as much time as you want , just you know i will pay you well as a tip
Yeah ill make a replica to see if it will even work
Just to let you know , the type of trees or logs are either heavenly tree , suiritcal logs , or magma trees
these are the only one i use
just for you to know the wood size
i doubt an entire tree could fit in the schematic you doodled out
but logs should do fine
Give me a sec
will you be using the freyliner to unload?
the big truck ? yea that
Sure so
nope , it fits
the size is quite
what i would probably do is
decent
tree goes in, gets detected by a material laser which toggles the conveyor
Yea good idea , and for example , whenever i bring logs , as soon as i park myself, i do a chat command , which auto enables the conveyor and despawns the truck
if youre on a freyliner i could add a button at the end which respawns your truck and triggers a spawn point thing to get you out of the near instakill bandsaws
i already have a prepared despawn command for the truck
I already have a respawn point thing
heheheh
as soon as im finished ill just say : /dtr and /rs , the truck is despawned , and i get respawned aswell
after which we move them through sander refiners the whole nine yards
Can we not use the sanders ?
Wait never mind
we can use it
so the tree can shorten in size
please continue
and after that for the items to go up properly (rocks tend to not like 45degree incline) we use a storage drawer dispensing up
which goes up into the 7th point
via conveyor likely
yea , great plan
electrical trees will become longer
i dont use that , dont worry
i dont use trees at all
Trust , this tree cutter is only for Suiritical and Heavenly tree
if so we could just remove the forgers and refiners i was going to place
to make it usable for everything
Like no need for rocks or forgers or refiners or even plankers
and not just suiratical and heavenlies
why not plankers
theyre really useful
Im in bed
i could try
My bad
Sick
whats ur user
Bet
Join me Ruben
OH you cant chat ?
@river tide can you see my message through notification ?
yes
@river tide ok look , the base already contains an auto loader
@river tide give me your sign
@river tideremove ownership lol
its ok
@river tide do you need to calculate the size of the basement ?
No
we can js ball with it
Lmao okay
only part needing to be precise
is to see if the freyliner could fit
Oh yeah hang on lemme
those guys scale from really small to wuite big
lmaao
i couldnt tell without anything indicating properly
If you want to join me one day and get measures from my basement i wouldnt mind
ionneed measures its fine
mmmmm baaaalright
ill be working on a smaller scale regardless ionhave that much room 😭
wait wait wait
Actually i do i have like three unused basement floors nvm i take that back
how about now
yeah thats good
thats all the measures i could ever need
Alright lol
ill hyu tomorrow with a design
gn
hello
Can u make auto chopper for tree and add it in my auto refinery
No thstd fine
you used that tutorial for the auto unloader right
the popular one which unloads and loads into the same truck
Yes
Ye ye
yeah i know rhat one
Sorry to cut yall conversation , just wanna let you know that i have increased the length , and thats all
yeah thats better

ill just move the refiners further forward with bandsaws instead
should work
How much it cost?
@river tide
id price it at around 30k if you provide the bandsaws
it doesnt seem that hard of a thing tondo
to do
you could do it yourself
Just place a filter conveyor before the refiners and cram like three or so bandsaws before the filter conveyor
id assume you have the sanders under the conveyors so have bandsaws above them
filter conveyor should let everything but unsawed trees pass
Alr can u make best auto loader/unloader?
@river tide I need a elevator that works just like a real one
so multiple floors
Yo can i ask for good sawmill tutorial?
@river tide im ready sorry if i couldnt do it yesterday
Im gonna be home soon
K
@river tide could you do it rn or are you occupied?
coming home
k
tell me when ur ready
i will be playing
btw if you are joining me my user is benjamin7riv
Yes if possible what’s your price
Sure
i wish i could swear because this is a good usage of those words
@tough temple ill join you
K
idk if i have joins enabled so ill join you
but try anyway
my user is benjamin7riv
my avatar is an axolotl
Yes
@tough temple do you want me to use this freyliner for the unloader/loader?
@river tide Can u do it
My schedule is swamped right now with irl stuff and exams
if i get some free time spontaneously i could probably do it
whats up
Never mind I can’t get on right now
Sorry it took so long to get back but I can talk now
@river tide Could you help me with a timer thingy
@river tide I was wondering if it was possible to make a timer that counts down real life days but in game?
Real life days?
I dont think so sadly
@drowsy ridge You could but the issue is that oaklands logic runs only when the plot is loaded and active
and if ur close to the plot
Its possible but it will constantly break if ur actually playing the game and not lets say sitting afk with a player shop
@drowsy ridge ill sketch something out
so this will count down real life days but in game?
Also @river tide what is the black rectangle?
its a display
Like the 7-segment display?
yup
Ok tysm how much money should I give u
I tried to do it and nothing happpened
What is the button for
its not gonna do anything until u wait a whole day
reset
count down
hm
give me a second
@drowsy ridge how many days do u want to
set it to
97
I just realized u said it wouldn’t work unless I’m always playing so I am just going to keep what I got you don’t have to figure out another one