I see its possible to make with two but i cant manage to find 3 or more personnaly i need three but i plan on adding more.
#Is there a way to make a billboard switching between three images or more ?
outer merlin
faint wharf
use and gates and relays
faint wharf
basically and gates output when both input are the same
so if you use a number interface to make it so that when you send a number the correct and gates turns on
you cna use the signal to turn on relays witht the images in them
outer merlin
UUUUUh ill try to understand can i have like a little drawing of like the placement ?
XD
faint wharf
outer merlin
But do they switch automatically between images /
faint wharf
basically you have a clock that goes from 1 to 10 and then resets
outer merlin
Okay
outer merlin
Okay im not sure if i understand but ill go buy the necessities and try
outer merlin
For the pink strings they are link with what ?
faint wharf
For the pink strings they are link with what ?
the clock that goes trough numbers
faint wharf
an incrementer with a frequency
outer merlin
Thx
outer merlin
Can i have a picture of the clock ?
faint wharf
its too compact
outer merlin
Okay
faint wharf
2sec
outer merlin
Thx
outer merlin
Im really sorry i am not able to see what is connected with what im reaaally sorry 😭 😭 😭
faint wharf
Im really sorry i am not able to see what is connected with what im reaaally sor...
the tether is the output
you take the output of the incrementer and connect it to all of your and gates
outer merlin
Are they alle number interface if yes what do i put in the top vs the bottoms one
@faint wharf
outer merlin
Okay Here too what are the value
outer merlin
Orange cable i guess its going too the screen ?
faint wharf
Orange cable i guess its going too the screen ?
yeah
faint wharf
Okay Here too what are the value
number interface set to the number of frames you want
outer merlin
What value do i put here ?
faint wharf
What value do i put here ?
for the relay the id of your images and for the and gate numbers going from 1 to whatever
faint wharf
Why it keeps going up ?
reset the incrementer
if it goes past it will just do that
you can switch the and gate with a greater than
outer merlin
reset the incrementer
How i reset it ?
Cause there is no interface
The incrementer keeps going up i changed for the greater then can the problem be the hz clock
Or like this ?
outer merlin
you can switch the and gate with a greater than
I guess the one from the clock ?
faint wharf
I guess the one from the clock ?
yes
outer merlin
Okay but it still doesnt work the number in the incrementor keeps goign infiniteley
What value i put the hz clock
faint wharf
What value i put the hz clock
depends what speed you wan tthe image to switch
outer merlin
depends what speed you wan tthe image to switch
Ok now for my incrementing problem ?
outer merlin
depends what speed you wan tthe image to switch
I cant put it less then 1 ?
faint wharf
I cant put it less then 1 ?
i think so yeah
faint wharf
Ok now for my incrementing problem ?
just make thz and gate a greater than
outer merlin
Okayyyyy
faint wharf
and wire to the right input of the incrementer
outer merlin
and wire to the right input of the incrementer
Its already like this but it doesnt work
Why its not working...
Pooopooo caca
faint wharf
Its already like this but it doesnt work
regarde le cable qui sort de l'incrementer
outer merlin
Uh ? Why it translated in french ?
faint wharf
Uh ? Why it translated in french ?
ta bio est en francais
outer merlin
Tu parle francais ?
faint wharf
Bah oui mdr
faint wharf
debranche et rebranche le fil qui sort du greater than
regarde si ya un signal dedans deja
outer merlin
Ya 0 qui sort du greater than
faint wharf
la number interface en haut a droite tu l'a mis a combien?
outer merlin
3
faint wharf
deco reco c'est un glitch
les greater than etc quand tu les relis ca fou la merde desfois
outer merlin
Ecoute sa fait plusieurs fois que g deco reco
