I get on/off and brightness options, but no Colors option: "CharaChorder > Display > LEDs || >O<N/off=off || >B<rightness=225". How can I change colors to a solid background color?
#Can't change backlight colors in GTM?
woven carbon
charred seal
I get on/off and brightness options, but no Colors option: "CharaChorder > Displ...
Interesting. What CCOS version are you on
woven carbon
2.1.0, I believe -- also on a related note (and potentially a dumb one) I have activated character only mode, but am not sure how turn it off, since I need to chord g+alt(dup) to launch gtm. I dont see a way to disable irt on the browser device manager either
charred seal
2.1.0, I believe -- also on a related note (and potentially a dumb one) I have a...
Turn chording on
Should be an option on the manager
glacial solstice
There are two chording toggles in the device manager: https://charachorder.io/
- Device > Keyboard > Character entry
On means character entry only.
Off means both character entry and chording is enabled (If the second toggle below is enabled).
This setting is toggled from the GTM's chording section: Character Only Mode
CharaChorder > Chording [ >C<haracter Only Mode=off || >P<ress Tolerance=30ms || >R<elease purring || >A<rpeggiate || co>M<pound ]
- Device > Chording
This toggle is more descriptive and it works as expected.
On mean chording is enabled.
Off mean chording is disabled.
woven carbon
ah I just did not hit save on the device manager- thank you both. The color issue still persists, though. Still no color option in GTM, and when I try to change color in the device manager, the LEDs only turn solid white -- even if i select another color, and I also no longer have the multicolor fading background that I had at first
charred seal
ah I just did not hit save on the device manager- thank you both. The color iss...
Try lowering the brightness. I believe the max is 50
The 225 might be breaking the device's ability to display the other colors?
woven carbon
No luck unfortunately. fwiw the default brightness was 250 for some reason
charred seal
No luck unfortunately. fwiw the default brightness was 250 for some reason
What happens when you lower it to 40?
woven carbon
The brightness does go down, but still no color options on GTM "CharaChorder > Display > LEDs || >O<N/off=ON || >B<rightness=40 ]"
exotic timberBOT
GG @woven carbon, you just advanced to level 1!
charred seal
The brightness does go down, but still no color options on GTM "CharaChorder > D...
And what happens when you select another color in the manager and hit Save?
woven carbon
same result as before -- I can toggle RBG on/off, but no matter what color I select, it will be white on the keyboard
subtle crown
