hello! i am building my first drone, but i am having trouble getting the sbus receiver to work with my FC (speedybee f405 wing mini). i am able to pair the receiver to the controller but i have no idea how the channels work or how i get the fc to be transmitting on a channel.
(i have a feeling it might be the ESC but tbh i really dont know. i was told that i should remove the positive wire from the esc as it could fry the FC. it could also be a receiver/channel issue since not even the servos work when i plug them into the correct uarts
#My first drone sbus issues :(
tired glacier
tired glacier
(i am using inav)
boreal needle
what usually helps is what receiver you're using
so for example FrSky or flysky
maybe that could help
but idk inav
I'll try to help you as best as possible
tired glacier
Sorry I am using a flysky fs-i6x using the fs-ia10b
I solved that issue though, now my issue is with my vtx. I soldered it onto the FC but it has 2 extra wires coming off of it a + and gnd. My analog camera also has those same wires but I don't know if those are connected
I suspect that they are but I don't want to wire something incorrectly since there are pads for "cam" on the FC
boreal needle
I solved that issue though, now my issue is with my vtx. I soldered it onto the ...
glad you solved it
the VTx has a 5V and GND output for the camera
my VTX has that too
but your VTx has 4 wires, so wire you camera to the FC
also
the camera is a VTx + Camera combo
so I recommend getting a different analog camera
tired glacier
so I recommend getting a different analog camera
if i follow this recommendation, would i still be using the same 3 in 1 system that i have current except with the different camera?
boreal needle
if i follow this recommendation, would i still be using the same 3 in 1 system t...
3in1?