#Radiomaster Zorro will not boot
1 messages · Page 1 of 1 (latest)
I have had it kn charge for about an hour or two prior to that video though Ill charge it again and get back to ya
hold on
where are you plugging in the cable?
Bottom
okay...
The usbc port on the bottom*
plug it in to the wall
like you're charging it
then power it on
alr
Its doin the same thing
hmm ok
take out the batteries
and put them back in
remember correct polarity
@foggy glacier
now try powering it on
Still nothing
okay...
hey, @foggy glacier
I emailed Radiomaster about the issue
they said installing new firmware should help
if not I would attempt to return the radio
Okay thanks
I gotchu bro
Ill try i really appreciate it
Bro whenever the zoom thing apaers let go of the button and voila
the secon zoom mean its ready to power of
don't change the firmware you transmitter is fine!
jus hold the on/off button and relaese when hear the zoom
wtf is the zoom
the buzzing sound
like something vibrates inside thats making the sound
or maybe its called a buzzing sound
Ill try rq
It did not work it still doin the same thing
I pressed system whilst turning it on and now im in a calibration menu
And now my gimbals arent working lol it says my throttle isnt idle when it is and when I go past it they dont work at all
And neither does the scroll wheel thing
From one problem to another ig
I think its a problem with edgetx though so Im going to flash the most recent version and hope it works?
So it did nothing
no
you can hold down the button as long as you want
and it won't turn off
it will just have the 4 dots
Okay
But o have seen many people with this problem on the zorro
And it is just because they are not used to the power sequence
Reflash it with https://buddy.edgetx.org/#/flash while the radio is off but connected to USB
So I reflashed it and the gimbals now work however the “tele” button “mdl” buttpn and scroll wheel all dont work (they did before)