receiver doesn’t give data

[wraith furnace]

Go to the port settings and send a screenshot

[noble olive]

отключено means off

[wraith furnace]

Well you don’t have your receiver enabled

Enable serial RX for uart 1

[noble olive]

done

still doesnt work

[noble olive]

what's next?

@wraith furnace

[wraith furnace]

Click save

And then go to reciever settings

Take a pic

[wraith furnace]

Is your radio on?

Move your sticks

[noble olive]

no

[wraith furnace]

Turn it on

Unplug the quad

[noble olive]

nothing happened

[wraith furnace]

Unplug the quad

Is the radio on?

[noble olive]

Yes

Nothing happened

[wraith furnace]

Omg

Okay

[noble olive]

But radio show that it’s bound

[wraith furnace]

Stop

Just stop

Chillax for a sec

Okay?

Unplug the quad from betaflight and it’s lipo

Aka turn it off

[noble olive]

Ok

[wraith furnace]

Once your radio is on, plug quad into BF

Go to reciever settings

Move your sticks

What happens?

[noble olive]

nothing

[wraith furnace]

Okay

How do you know rx is bound?

Go to your lua script on your radio (ELRS settings) and take a pic

[noble olive]

Because of these four lines

And if I try to turn the radio off it says that the rx is still bound

[wraith furnace]

When you unplug your quad, do those go away?

[noble olive]

Yes

And it says “telemetry lost”

I really want to make this work until tomorrow because I’ll be away from home for 2 weeks and I won’t be able to make this work during these two weeks

[wraith furnace]

Take a pic of the quad and the rx

We will get it working I promise

[noble olive]

And one thing is that on this quad was a receiver before but when I turned it on today it just stopped working because the led doesn’t shine so I replaced the rx from an old quad

Radio off

Radio on

@wraith furnace I really want it work because today I went to the service to take my old drone but the only thing that they made is-broke the battery (and they were doing it for 3 weeks)

It’s the most disappointing day in this whole year

[wraith furnace]

What did you connect the rx to, t2 and r2?

@noble olive

[noble olive]

Yes

[noble olive]

Rx to t2. tx to r2

[surreal cosmos]

U sure?

[noble olive]

Yes

[wraith furnace]

Change this to uart 2

Instead of uart 1

[wraith furnace]

I meant this…

@noble olive

That should fix it

Lmk if it works

[noble olive]

guess what?

[noble olive]

no

[wraith furnace]

Yea

[noble olive]

why doesn't it work?!

[wraith furnace]

dw, we will solve it

lemme go pee, i just got back home

[noble olive]

time is 10 pm and i have to pack some things today and get up at 7 am

[noble olive]

okay

i don't mind

@wraith furnace do you have any more ideas?

[wraith furnace]

ye i do

many more

[surreal cosmos]

Scary

Verry scary

[wraith furnace]

lmao

flip your rx and tx wires

should work then

@noble olive

[noble olive]

i've tried it

[surreal cosmos]

You wanna know why? Because you're a failure and u have rx going to rx. I will now sell your dog

[noble olive]

i have rx going to tx

[wraith furnace]

no you do not

[surreal cosmos]

Swap and resflash

[noble olive]

reflash what?

[wraith furnace]

you don't need to reflash anything

!mute @surreal cosmos

[fading finch]

Senk0-san#6969 muted cylzy#2833 for 1 hour. Reason: None

[wraith furnace]

RX is green

R2 is on the left

green is on the left

so you have RX -> R2

@noble olive

[noble olive]

guess what?

is head free an acro mode?

[noble olive]

worked!!!!!!!!!!!!!!!

@wraith furnace

which is acro?

[wraith furnace]

N/A

if no modes are enabled, acro will be enabled by default

[noble olive]

ok

[noble olive]

@wraith furnace I’ve tried it and I think that most probably the motors are spinning wrong direction so in a few days you may be able to help me

[wraith furnace]

WITHOUT THE PROPS ON

spin the motors in bf

and take a vid

[noble olive]

I can’t do it now because I have to tidy up and go to bed

[noble olive]

@wraith furnace

[noble olive]

Seems like it’s rotating okay in bf but with radio it rotates on one direction

[wraith furnace]

What?

Hold on, you’re doing it wrong

[noble olive]

How? I don't know the other way.

[wraith furnace]

show the motors tab

just take a screenshot

[noble olive]

it says so in bf but in real life it's not this type of turning at all

[wraith furnace]

there should be an option somewhere heere

[noble olive]

how does it called?

[noble olive]

stop motors?

[wraith furnace]

scroll down

and you will see

take another pic

[noble olive]

this one? motor test mode?

[wraith furnace]

yep

there we go

click that

and then move one of the bars up

[noble olive]

ok

[wraith furnace]

you will see a motor spins up

move it slightly up

[noble olive]

no

[wraith furnace]

you need a lipo plugged in...

[noble olive]

i know

i found it

i have to move the slider

[wraith furnace]

mhm

then make sure each motor is spinning in the right direction according to the diagram

this diagram

[noble olive]

no

i think all of them spinning clockwise

but i am not sure because they are too fast

[noble olive]

i'm 85 percent sure that they are all rotating clockwise

[wraith furnace]

make it 100

[wraith furnace]

feel with your finger

put it on the lowest speed

and feel it out

[noble olive]

i've tried

[noble olive]

100 percent sure that all of them rotates clockwise

[wraith furnace]

so 4 and 1 are fucked

[noble olive]

ok

[wraith furnace]

that says remap motors, right?

[noble olive]

yes

[noble olive]

still the same thing all clockwise

[wraith furnace]

can ya hop in call?

[noble olive]

no

i can't

[wraith furnace]

what quad is this again

@noble olive

[noble olive]

cinelog 30

geprc

[wraith furnace]

https://esc-configurator.com/

go here

top right, click connect on your quad

[noble olive]

done

[wraith furnace]

bottom right, read settings

[noble olive]

next?

[wraith furnace]

show

[noble olive]

what's next?

[wraith furnace]

flip esc 1 and 4 to "reverse"

change this to reverse

click "write settings"

then disconnect (top right) and unplug the lipo

go back into bf and test it

[noble olive]

worked

okey, so can i try it now?

[wraith furnace]

if you put the props on correctly, yes.

[noble olive]

Ok

[noble olive]

thank you very much!!!!!!!! it works

@wraith furnace
One more question: how to fix that

In bf it’s the same

[wraith furnace]

did you wire it correctly?

[noble olive]

i didn't wire it it was wired allready

[wraith furnace]

you didn't set it here

[noble olive]

okay

1 second

[noble olive]

should i just turn on serial rx?

i remember by chance i desoldered a wire from vtx but i soldered it back

[noble olive]

what should i do to set it?

[wraith furnace]

whatever pad your vtx is on

[noble olive]

Just turn it on?

[wraith furnace]

no like

what uart is your vtx on

[noble olive]

No idea

[wraith furnace]

so then check

[noble olive]

How?

[wraith furnace]

look at which pad it's soldered to

[noble olive]

These ones

[noble olive]

Okay anyway I can just try all of the uarts and find out which one it is, do I have to do something except turning on serial Rx on a Uart?

[wraith furnace]

you don't turn on serial RX

you turn on VTX on uart 1

[noble olive]

Thanks

Worked

Thank you for everything!

[surreal cosmos]

Thats going to be 50 bucks, ill send you my paypal