#arm disarm

1 messages · Page 1 of 1 (latest)

neon creek
#

idk how to setup that

broken dew
#

Bruh

neon creek
#

i know

#

can u help

chilly jacinth
#

@neon creek check out those links, come back if you have more specific questions

neon creek
#

in configurator i think everything is allright

Screenshot_19.png
chilly jacinth
#

no

fiery lintel
#

In this state (assuming you have the switch output well calibrated), it will always be armed

#

Even when it shouldn't

chilly jacinth
#

and what radio protocol are you using ?

neon creek
#

elrs

chilly jacinth
#

The arm NEEDS to be on aux1/channel 5

chilly jacinth
neon creek
chilly jacinth
#

yes, the armed range is the yellow part

#

so you want that to only include 2000

#

like in the picture above

#

and make sure it's on aux1 ! you have it set on aux2

neon creek
#

ok but i screwed up something

Screenshot_20.png
chilly jacinth
#

no, that is correct

#

if you mean the (disabled) flag, that is because you are plugged into usb, so it won't arm

neon creek
#

no when switch is down it is armed

#

when it is up it is disarmed

chilly jacinth
#

you can set the weight in the mixes to -100 to flip it around

neon creek
#

ok

#

it still doesnt work

chilly jacinth
#

what doesn't work

neon creek
#

when drone is connected to the battery i flip the arm switch and it is not responding

chilly jacinth
#

can you go to the cli tab and enter the command status

#

and share the result ?

neon creek
#

but when i connect my drone it also says this

Screenshot_21.png
chilly jacinth
#

hmmmm I sure wonder what the issue could be

#

and it's not receiving an rc signal either so you'll have to check that too

#

is this a prebuilt quad ?

neon creek
#

yes

chilly jacinth
#

what quad

neon creek
#

happymodel crux35

chilly jacinth
#

you reset the settings, didn't you ?

neon creek
#

in betaflight?

chilly jacinth
#

yeah

neon creek
#

what command does that'

#

in cli

chilly jacinth
#

idk what you did but you wiped the factory config

neon creek
#

how to get it back

chilly jacinth
#

paste this in cli

neon creek
#

yes analog

chilly jacinth
#

or do load from file and select the txt file after downloading

neon creek
#

what next

chilly jacinth
#

ok

#

did you flash the transmitter with a bind phrase ?

#

can you open the ELRS Lua script on your radio ?

neon creek
neon creek
chilly jacinth
#

what version is the ELRS module on ?

#

it should say at the bottom in the Lua script

neon creek
#

3.1.1

chilly jacinth
#

so

#

the thing is

#

your betaflight version supports only ELRS 2.x, so you can either flash the ELRS module to 2.5.1 or you give me a moment while I look for the proper betaflight version

neon creek
#

i give u a moment

chilly jacinth
#

ok

#

@neon creek

image.png
neon creek
#

does it have to be in dfu mode

chilly jacinth
#

no, it should be able to put it in dfu on its own

neon creek
#

it says bootloader failed

chilly jacinth
#

then try dfu mode

neon creek
#

i forgot how to get in dfu mode

#

everytime i forget

chilly jacinth
#

try the driver fixer

#

or find the boot button on the fc

neon creek
#

programing succesfull

#

succesful

chilly jacinth
neon creek
#

i did what is next

chilly jacinth
#

in the ELRS lua script enable wifi

#

connect to the wifi network

#

password is expresslrs

neon creek
#

on radio?

chilly jacinth
#

yes

#

wifi connectivity, enable wifi

neon creek
#

i connect with my pc on the radio network

chilly jacinth
#

yes

neon creek
#

when i did that

chilly jacinth
#

enter a binding phrase

#

it can be anything

#

it's not a password

#

you just have to remember it

neon creek
#

ok

#

so save and reboot\

chilly jacinth
#

yes

#

after that you can quit wifi mode

#

and then paste that in the cli tab in betaflight

neon creek
#

what do i paste first set ELRS index = or set ELRS uid

#

so what is next

chilly jacinth
#

now the transmitter and the quad should be bound

#

verify that you get stick movement in the receiver tab and that the switches work in the modes tab

neon creek
#

it is not bound

#

i have to go

neon creek
#

@chilly jacinth

chilly jacinth
#

Can you get a screenshot of the webui by connecting to the tx wifi once again?

neon creek
chilly jacinth
#

Yes

neon creek
#

and when i go in system settings then i select expresslrs there is nothing showing up just loading

#

so i cant visit what page

chilly jacinth
#

Did you change anything between now and when you did access that page earlier

neon creek
#

no

#

before i had connection between drone and radio but now there is no connectivity