#MAL collection builder based on "season" is incomplete

1 messages ยท Page 1 of 1 (latest)

brittle garnetBOT
#

๐Ÿ“ If you want to review this again, unarelith:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> ๐Ÿ“

#

Welcome @runic lance!

It looks like you have not yet completed the id:customize section of our Discord server, this will allow us to help you quicker.

Someone from <@&938443185347244033> will assist when they're available.

Including meta.log from the beginning is a huge help. Type !logs for more information.

After attaching your log, do not forget to hit the green check boxes when prompted by our bot.

#

You can press the "Close Post" button above or type /close at any time to close this post.

brittle garnetBOT
#

๐Ÿ“ If you want to review this again, unarelith:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> ๐Ÿ“

lone mantleBOT
#
Providing Log Files

1: Go to your config folder

2: Go into the logs folder

3: Look for meta.log (not meta.1.log etc)

4: Drag it in the Discord thread - the whole thing, DO NOT EDIT IT

5: Still confused? ยฏ_(ใƒ„)_/ยฏ

Log file too big? USE PASTEBIN or ZIP THE FILE

Thanks for using Kometa
runic lance
#

Do I need to put the full log or is the part I sent enough?

Cause there is sensitive data that is not "(redacted)" in the logs:

  • GitHub: token
  • MAL: access_token, refresh_token, client_secret, localhost_url
wise holly
#

Yes full log. What is not redacted in the logs?

wispy oak
#

Those should 100% be redacted

runic lance
brittle garnetBOT
#

๐Ÿ“ If you want to review this again, unarelith:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> ๐Ÿ“

viscid hinge
#

They're redacted for me:

| github:                                                                                            |
|   token: (redacted)                                                                                |
...
| ########## GENERATED BY MALAUTH ##########
| mal:
|   client_id: (redacted)
|   client_secret: (redacted)
|   authorization:
|     access_token: (redacted)
|     token_type: Bearer
|     expires_in: 2678400
|     refresh_token: (redacted)
|   localhost_url: (redacted)
|   cache_expiration: 60
| ############################################
...
|=============================================
| Connecting to My Anime List...
| My Anime List Connection Successful
|=============================================
runic lance
#

Then I don't know why it isn't the case for me ๐Ÿคท

viscid hinge
#

Looks like perhaps in your config you have the attribute name and value on separate lines? That might be the issue.

runic lance
#

This part was generated using Quickstart so I'm probably not the only person with this issue

#

But thanks, I'll change that

viscid hinge
runic lance
# viscid hinge I suppose either Quickstart should stop doing that or the redaction logic here s...

Quickstart is good for a beginner but not that great tbh:

  • It adds a lot of default options to the config, which are not even needed for some of them (and some even generate warnings)
  • It lacks some options, so going in the docs is still needed in some cases
  • It's not clear how it works (for example having to go to "Final Validation" seems to automatically save the config)
  • It overwrites/removes some options manually changed in the config without asking
  • It is able to install/update/run Kometa, but:
    • It would make more sense to be able to use Kometa docker container instead
    • The update is automatic, would be nice to have an option for it to be manual instead
    • It is able to run Kometa, but if I refresh the page I have to manually stop the process if I need to, because it loses track of it
    • The log viewer is limited and when running Kometa it will keep scrolling down automatically so I can't read the logs (especially annoying with "Run at scheduled time")
    • The first time I tried, it was ignoring the run parameters, so I had to manually create an .env file with the options I wanted

But aside that it was nice to start using Kometa, I'll probably make a ticket on GitHub for that.

Anyways back to my original issue, [here are the full logs](#1455308782040121394 message) which were a bit lost in the conversation.

viscid hinge
#

QS is known incomplete.

Quickstart overwriting a manually-edited config is correct and expected. There is no provision for importing or editing an existing config [or one of it's own configs you've edited]. Your selections are stored in a database, and at the end the config is exported. That final config is an output-only artifact, and Quickstart pays no attention to any changes you make to it.

runic lance
#

I changed the collection name for Summer 2025 and realized this:

  • The old and new collections had 7 elements and it stayed like that for a few days
  • The new collection now have 9 elements:
    • It added Kaiju, Clevatess and Sakamoto Days
    • But it removed Secrets of the Silent Witch for some reason
image.png image.png
#

What is this based on? I don't understand how it could add/remove elements on a past season.

For information: Those 4 animes (3 added, 1 removed) were all part of the Summer 2025 season, and some are still missing in the collection.

shadow island