Collections creations | Kometa | Page 1

crystal ridge Dec 11, 2025, 11:12 PM

#

Trying to get some initial seasonal collections created. When running the config through it appears that collections are generated however when viewing within plex, no collections exist. Im just using kometa quickstart as a starting place while i figure out this program. Looks like there might be an issue with some of the seasonal list. The oscars and such work fine. See below error on xmas.

📎 message.txt 📎 config_redacted1.yml

pure solsticeBOT Dec 11, 2025, 11:12 PM

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

Welcome @crystal ridge!

Someone from <@&938443185347244033> will assist when they're available.

Including meta.log from the beginning is a huge help. Type !logs for more information.

After attaching your log, do not forget to hit the green check boxes when prompted by our bot.

#

You can press the "Close Post" button above or type /close at any time to close this post.

pure solsticeBOT Dec 11, 2025, 11:12 PM

#

pure solstice You can press the "Close Post" button above or type `/close` at any time to clos...

#

**Kometa Config.yml YAML Validation** ❌

The config.yml was not detected within your log file. Is it a complete log file?

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

**User Info**

Author of Linked Message: Labelbuddy
Person who Invoked the Command: Antwan
File Name: message.txt

Table of Contents:
Page 01: User Info
Page 02: Kometa Info
Page 03: Kometa Summary Info
Page 04: Kometa Config.yml YAML Validation ❌
Page 05: Rec 01 - ❌ [ERROR]
Page 06: Rec 02 - ❌🛠️ INCOMPLETE LOGS
Page 07: Rec 03 - Error: Plex scheduled time is missing.
Page 08: Rec 04 - Error: Memory value not found in content.

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

**User Info**

Author of Linked Message: Labelbuddy
Person who Invoked the Command: Antwan
File Name: message.txt

Table of Contents:
Page 01: User Info
Page 02: Kometa Info
Page 03: Kometa Summary Info
Page 04: Kometa Config.yml YAML Validation ❌
Page 05: Rec 01 - ❌ [ERROR]
Page 06: Rec 02 - ❌🛠️ INCOMPLETE LOGS
Page 07: Rec 03 - Error: Plex scheduled time is missing.
Page 08: Rec 04 - Error: Memory value not found in content.

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

crystal ridge Dec 11, 2025, 11:14 PM

#

For refrence. Using default quick start, nothing modified.

pure solsticeBOT Dec 11, 2025, 11:14 PM

#

**User Info**

Author of Linked Message: Labelbuddy
Person who Invoked the Command: Antwan
File Name: message.txt

Table of Contents:
Page 01: User Info
Page 02: Kometa Info
Page 03: Kometa Summary Info
Page 04: Kometa Config.yml YAML Validation ❌
Page 05: Rec 01 - ❌ [ERROR]
Page 06: Rec 02 - ❌🛠️ INCOMPLETE LOGS
Page 07: Rec 03 - Error: Plex scheduled time is missing.
Page 08: Rec 04 - Error: Memory value not found in content.

velvet junco Dec 11, 2025, 11:15 PM

#

All the seasonal are on default schedules. The ONLY collection that will show at this time is Christmas

#

Unless you use variables to modify the schedules for each holiday

crystal ridge Dec 11, 2025, 11:16 PM

#

correct, but it isn't showing. Looks like audience rating might not work for it.

#

#

Full collections post running

velvet junco Dec 11, 2025, 11:17 PM

#

Looks like audience rating might not work for it.
what does that mean?

crystal ridge Dec 11, 2025, 11:17 PM

#

See the error from the screen shot above.

velvet junco Dec 11, 2025, 11:18 PM

#

@crystal ridge can you post a full log and not just a snippet, please?

crystal ridge Dec 11, 2025, 11:18 PM

#

audience.asc is invalid

#

Yep. here you go!

📎 meta.log

pure solsticeBOT Dec 11, 2025, 11:19 PM

#

📝 If you want to review this again, labelbuddy:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

**Rec 03** - ⚠️ **NO ITEMS FOUND IN PLEX**

⚠️ NO ITEMS FOUND IN PLEX
The criteria defined by a search/filter returned 0 results.
This is often expected - for example, if you try to apply a 1080P overlay to a 4K library then no items will get the overlay since no items have a 1080P resolution.
It is worth noting that search and filters are case-sensitive, so 1080P and 1080p are treated as two separate things.
For more information on this error, [https://kometa.wiki/en/latest/kometa/logs/?h=[error]#error]
11 line(s) with 'No Items found in Plex' errors. Line number(s): 8677, 9177, 9682, 13435, 13917, 14404, 28645, 29672, 73366, 74393, 149948

#

📎 parsed_meta.log_config_Labelbuddy.yml

crystal ridge Dec 11, 2025, 11:19 PM

#

All just basic stuff through quickstart, only difference is i change the sort to audience rating.

velvet junco Dec 11, 2025, 11:22 PM

#

crystal ridge All just basic stuff through quickstart, only difference is i change the sort to...

right, however posting only a portion of the logs gives us only a portion of what may or may not be the issue. if you post the entire log file, it also gets us a redacted version of the config and the error in context

#

but looking at the logs, it does tell you exactly why seasonal collections did not work
Collection Error: sort_by: audience.asc is invalid. Options: title.asc, title.desc, year.asc, year.desc, originally_available.asc, originally_available.desc, release.asc, release.desc, critic_rating.asc, critic_rating.desc, audience_rating.asc, audience_rating.desc, user_rating.asc, user_rating.desc, content_rating.asc, content_rating.desc, duration.asc, duration.desc, progress.asc, progress.desc, plays.asc, plays.desc, added.asc, added.desc, viewed.asc, viewed.desc, resolution.asc, resolution.desc, bitrate.asc, bitrate.desc, random

crystal ridge Dec 11, 2025, 11:48 PM

#

Yeah just wanted to put in a case as that IS an option with in the quick startup app, so others might run into it

#

Idk why audience rating desc is not selecting right but that’s what I have selected and is a valid option

#

Meaning I selected audience_rating.desc but when quick startup app builds the configuration it makes it audience.asc

crystal ridge Dec 12, 2025, 12:52 AM

#

FYI changing it to random or another option for sorting fixed it.

velvet junco Dec 12, 2025, 12:55 AM

#

crystal ridge FYI changing it to random or another option for sorting fixed it.

Right, which is why the other options were listed.

#

audience_rating.asc is valid, not audience.asc

crystal ridge Dec 12, 2025, 12:56 AM

#

Yep just confirming def an issue with audience rating sorting option with QuickStart 🙂

velvet junco Dec 12, 2025, 12:57 AM

#

You can manually change it in the config

#

@uneven smelt check this out

uneven smelt Dec 12, 2025, 1:36 AM

#

Looks like a UI bug in QuickStart

velvet junco Dec 12, 2025, 1:40 AM

#

uneven smelt Looks like a UI bug in QuickStart

Yes, I just don’t know where to fix it to submit a pr

uneven smelt Dec 12, 2025, 3:28 AM

#

velvet junco Yes, I just don’t know where to fix it to submit a pr

No prob. I did a search for all references to audience.asc and will replace that with audience_rating.asc

velvet junco Dec 12, 2025, 3:29 AM

#

uneven smelt No prob. I did a search for all references to audience.asc and will replace that...

Sweet

uneven smelt Dec 12, 2025, 4:26 AM

#

New develop being pushed to fix this

uneven smelt Dec 12, 2025, 4:42 AM

#

Build successful

velvet junco Dec 12, 2025, 5:00 AM

#

@crystal ridge see above

mystic pawnBOT Dec 12, 2025, 5:00 AM

#

antwanchild used !afnh

@crystal ridge, anything further needed here? If not, please type /close and hit enter. Please respond within 24 hours of this message or it will be archived.

#Collections creations