#mass poster update for movies not running

1 messages · Page 1 of 1 (latest)

sacred yokeBOT
#

✅ YAML validation passed!! That is valid YAML, but may not meet Kometa's requirements

#

📝 If you want to review this again, wdpaynter:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

#

Welcome @noble verge!

Someone from <@&938443185347244033> will assist when they're available.

Including meta.log from the beginning is a huge help. Type !logs for more information.

After attaching your log, do not forget to hit the green check boxes when prompted by our bot.

#

You can press the "Close Post" button above or type /close at any time to close this post.

sacred yokeBOT
#

after making changes I run Kometa once to update collections, then have it run at 5am every day to update movie poster art. I also just let it update my sole TV shows collection (networks). The last few times it has run, it is not updating the movie posters. I do not think I changed the config file to stop the mass poster update, as it "reads" my entire Plex movie library. One thing that may be affecting it is that I have (1) HDD removed from my server having the SATA data port repaired. I do not have empty trash after every scan turned on in Plex, as I will put those movies/tv shows back when the drive is repaired.

Attaching config file and logs hoping someone might catch my issue. I use local assets from the movie folders where the file resides.
Any help is appreciated. Thx

noble verge
#

FYI, I currently use Kometa for collections and poster art, no overlays or ratings. Thx

sacred yokeBOT
#

📝 If you want to review this again, wdpaynter:
:one: Right-click (or long press with phone) on the message that contains the log
:two: Select: Copy Message Link
:three: Use the command: /logscan <message_link> or !logscan <message_link> and paste the value copied from the previous step where you see <message_link> 📝

sacred yokeBOT
# sacred yoke
**Rec 01** - 💥 **[CRITICAL]**

💥 [CRITICAL]
Critical messages found in your attached log.
There is a very strong likelihood that Kometa aborted the run or part of the run early thus not all of what you wanted was applied.
For more information on handling these, [https://kometa.wiki/en/latest/kometa/logs/?h=[critical]#critical]
1 line(s) with [CRITICAL] messages. Line number(s): 663

Page 7/10
sacred yokeBOT
vernal karma
#

@noble verge plex times out while processing your library and then moves on. not much Kometa can do about that. you could increase the timeout

noble verge
#

Do you have a clue as to what might be the cause? Do you think it is because of the missing HDD (Plex shows the movies but they aren;t physically there)?

midnight robin
#

There's no way to tell.

Conceptually, this is you knocking on your neighbor's door and they don't answer before you decide to give up.

Why didn't they come to the door? No way to know from the outside; all you can do is decide to wait longer.

noble verge
#

Understood. I changed timeout to "600" and it has made it further along. I will monitor and/or wait until missing files are present. Thanks guys!

#

Ya'll don;t have a "buy me a beer" button?

midnight robin
#

github sponsorships for the author

noble verge
#

I'm not familiar

#

Donate to Kometa on github?

midnight robin
#

Over in the sidebar in the repo

image.png
noble verge
#

Got it, thanks