#My Perseus Info Dump:
1 messages · Page 1 of 1 (latest)
TDLR at bottom:
First of all apologies for the squiggles, it autosaved half way through and now i have no way of getting rid of them :(
Here are my base dimensions for referance:
Character height (Male) 2 Meters
Height of polaris door inclduing floor and ceiling = 2.5m
Lightbar= 75cm
This viewing angle was dogshit, i imagine for good reason.
In the image below are my workings, Take these with a HUGE chunk of salt nom nom
I calculated a few things based on the size of the elevator and the height of the polari's elevator door, which from floor to ceiling, inclduing both floor and ceiling at door are around 3m in height, from that i guesstimated that the distance between doors is around 4m, which i rounded up from around 3.7-3.8m to give a max range of around 15.5m.
The door spacings are to be taken with extra salt as they are guessed based on the polaris' spacings which is 4-5 ish meters, considering that the polaris is only around 30% larger this does make somewhat sense but i am sure my calculations are off by a fair bit. I also used the lightbars on the right, which are around 75cm as a rounded rough guess, and the distance between the two is approx 3 lightbars meaning that with 4 lightbars and 4 spacings, these give a distance of 11.5m, when added with the space at the top that was too hazy to calculate the distance of but we can guesstimate again that it is mabye somewhere in the range of 2 lightbars, it is safe to say that it is mabye somwehere around 13.5m at the minimum.
My estimation for the persues' elevator shaft is anywhere from 13-15.5m, this is far more likley to be on the low end and my best guess would be around 13.5-14m which for a ship of 20m in height is definitely too large, considering its engine height and the raised bridge. I really couldnt make my mind up on the distance between floors as it is very deciving, i would say my best guess is 3.75m, with the doors themselves being 2,5m
Final calculations:
(4x2)+(2.5x3)= 15.50m (High range)
(4x0.75)+((3x0.75)x4)+(2x0.75)= 13.50m (Low range)
My best guess= 14m
If 14m is the interior elevator size, then it is safe to say that we can give around 3m for the bridge and its roof, considering the elevator would be below it from the whitebox interior design. We then need to give another 4m for the engine "spikes" and the turret (the "spikes" being the pointy things that i can give a better name to), there should then be given another 2m due to its thick armour on the bottom, and likely another 5m below that for the engines again.
TDLR: Expect height of anywhere between 25-30m
My final guess for height is 28m, so smaller than i had anticipated but a bit larger than the 27m guess you had, good guess (assuming this is somewhat accurate info i have created).
OC version of Persues Vs 120m Persues Ship size comparison
TDLR of messages about sizing expectations of perseus
Expect any size in the following range to be true
Max: 135x65x30
Min:120x55x25
My personal Expectation: 130x60x28
Zorgh's Estimate: 125x60x27 Max
Ratios, Volume and other sizing:
Original ratio: 1 : 0.50 : 0.21 (100x50x21)
Max: 1 : 0.48 : 0.22 (135x65x30) (closest to original, just a little wider/taller)
Min: 1 : 0.46 : 0.21 (120x55x25) (slimmer width, same thickness)
Expectation: 1 : 0.46 : 0.22 (130x60x28) (slimmer width, slightly thicker)
The original volume is 105,000 meters³.
Compared to this, the Max size (135×65×30) is 263,250 (about 251% of the original),
The Min (120×55×25) is 165,000 (157%),
The Expectation (130×60×28) is 218,400 (208%).
To keep proportions closer to the original 100:50:21 ratio, the sizes could be adjusted to:
- 120×60×25 (180,000, ~171%),
- 130×65×27 (228,150, ~217%),
- 135×68×28 (257,040, ~245%).
These corrected versions keep the volumes similar but align more closely with the original shape.
@fresh moon idk you might be interested? sorry for the ping if otherwise lol
please do add anything lol
(all my freinds think im fucking nuts :) )

|| Where leak?
||
I created a monster 
na you just let me out my cage
I don't think I have anything to add, this one line basically sums up all I have to say 
BTW i don't want to be mean @desert falcon but this is the leak section, your post indeed don't contain any leaks, Null0 is right
If you just wanna talk about the Perseus, you should post here instead
https://discord.com/channels/82210263440306176/1121113616926638131
i relaised this almost immedatley after posting
and wnated to bash my head in
if i can find the time ill move it
would you prefer i move the entire thing or just the heigh calculation stuff and other stuff regarding length ect? would delete this post afterwards
you could copy and past you posts here to out there and after, delete that original post here, which should delete the entire thread
Ill do that this evening
thanks, and i agree, this ship is a beauty indeed
Yes i agree. best pledge i ever made
I had pushed the Percy out of my pledge plans, but it quickly came back 
I wonder how much it will cost when next available
it will be at IAE probs around 800US
Cheers man, just enjoying my free time!
Also i have put an update version of this stuff in https://discord.com/channels/82210263440306176/1121113616926638131 as i will need to close this poost 
+1
Omfg I'm so glad I have everything minus like 3 parts of my chain done lol that looks spicy and really makes it look even cooler 👀
there is some more over in https://discord.com/channels/82210263440306176/1121113616926638131
I wish we could delete all the chatter here @desert falcon
Why is this thread even still open