#M82 - with a little bit of color

5 messages · Page 1 of 1 (latest)

jagged hull
#

Very little RGB data here, so far 6hrs of HA data, which is missing a lot of the fainter stuff i think
FL2415,FR11.5,ASI533MM,AM5

rich folio
#

Sick detail!

hushed seal
#

I see some patterned lines in the bg, everything alr?

jagged hull
# hushed seal I see some patterned lines in the bg, everything alr?

Yeah good spot…. Horizontal banding has popped up… read it’s maybe related to usb cables? I’ve changed cable routings so could be the case, don’t know, have a new fancy usb3 cable that I will direct feed cam. To see if it helps. Only other thing I’ve changed is cam temp for these was -20 usually run at -10

jagged hull
# hushed seal I see some patterned lines in the bg, everything alr?

Think I’ve just solved this.
The banding occurs ONLY if using the cam data hub. If I direct feed cam, feed all other devices on a separate feed from ASIAIR to scope mounted standalone hub (distributed from there to EAF, FW, Guide cam) issue is gone…. This is how is used to do it. Did some ‘cable management’… obvs didn’t go well!