#SHO test on bubble neb
35 messages · Page 1 of 1 (latest)
now let us see
@rain talon I might have to do this tomorrow, I will download the files for now.

I downloaded it but theres some very wierd stuff going on with the Ha stack so far. First of all, I think your mount isn't level... half the subs are tilted 27 degrees. I rejected them but I'm still getting some wierd shaped stars and artifacts coming out. I haven't checked the other data yet. Will after some sleep
You can probably squeeze out more, my processing at 1am isn't the best
some ha subs where toyed with and needs to be removed
thinking one could crop and rotate em up or something
dont think you can do 600 sec subs with a very unlevel mount
data was over 2 sessions with the rig apart in between
Yeah it wasn't the crop that was problem but this wierd grid pattern popped up when I stacked them. It's more than likely a DSS thing, not you.... But it can be prevented.
did a dirty quick siril attempt at stack new link to the 3 files
Copy
just need to know if it can be used for my lerning to get em together
I didn't see anything in the Ha subs that raised concern. I did see half of them with alot of skyglow tho.
Personally I reject my skyglow subs, but in your case with limited time you probably can't afford to do that, which is fine.
I'll play with it some more tonight.
skyglow is from taken from a balcony over 35+ led lights and moon
in bad seing
twinkle twinkle little star.....
Redcat right? I don't think you're seeing limited. Led lights are a pain though.
was hazy and high humid
but yea rc 51
frosty with ice there dont help
but hasy and wind etc will cost on the light gathered
I threw away all your Ha data from December 16th. The Oii data had a few sky washed subs as well. The Sulfur data was all actually pretty decent, I scrapped one. Now the problem is it's not aligned lol
nice
although a crop is needed there is a chance to combine and learn
was bad seing all the nights
and now found out how to fix fov from session to session
might build a rotator later though
I just put a mark on my focuser and my imaging train, use those to line up if I have to remove my imaging train for some reason. Always within a degree or two
dont have a marker im sure will stay on black