#bots

1 messages · Page 139 of 1

sand scaffoldBOT
#

wisecult, you just advanced to level 4

#

bolo99chicken, you just advanced to level 2

dense python
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

panda_it, you just advanced to level 5

#

n1ret, you just advanced to level 2

#

juicewrldvibes, you just advanced to level 1

#

flacko_15, you just advanced to level 2

#

optiomal, you just advanced to level 9

sand scaffoldBOT
#

GG @granite moon , you just unlocked the achievement: Give or Take! 🥳

#

.grzybert, you just advanced to level 1

#

total_perspective_vortex, you just advanced to level 1

sand scaffoldBOT
#

neolos14, you just advanced to level 1

#

morcol751, you just advanced to level 8

sand scaffoldBOT
#

mafien0, you just advanced to level 1

sand scaffoldBOT
#

kustedd, you just advanced to level 1

little cradle
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

gamingwithlolo, you just advanced to level 1

sand scaffoldBOT
#

er.bresaola, you just advanced to level 1

sand scaffoldBOT
#

anooshytooshy70, you just advanced to level 2

sand scaffoldBOT
#

northeee, you just advanced to level 1

sand scaffoldBOT
#

ehhgg, you just advanced to level 1

copper copper
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

dry fjord
#

Better MC 4 - v53 crashed without a crash report. The logs have been uploaded to mclo.gs:

  1. 1.20.1 [FORGE]
  2. What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
  3. Have you changed the modpack in any way except mods?
  4. v53
  5. Have you ever gotten past the crash condition without crashing, or does the game always crash?
  6. What steps cause the crash?

latest.log | crash_assistant_app.log | modlist.txt | CurseForge: skip launcher

Mod list changes on top of the modpack:

Mod list was not modified.
sand scaffoldBOT
#

cube0243, you just advanced to level 1

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

GG @polar summit , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

shadeuz, you just advanced to level 3

#

josmei, you just advanced to level 1

sand scaffoldBOT
#

nxxxv2__, you just advanced to level 4

sand scaffoldBOT
#

smells_like_upgamer, you just advanced to level 2

sand scaffoldBOT
#

mcbinkle, you just advanced to level 1

sand scaffoldBOT
#

dragon_tom, you just advanced to level 4

sand scaffoldBOT
#

moneyeatingcatlc, you just advanced to level 1

patent breach
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

errant radish
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

masi19_, you just advanced to level 1

#

glamourized., you just advanced to level 1

sand scaffoldBOT
#

fix3dll, you just advanced to level 3

#

GG @olive ingot , you just unlocked the achievement: Give or Take! 🥳

gloomy pebble
#

!updatemods

frank tuskBOT
#

Do NOT Update Mods Manually!

Modpacks use specific versions of certain mods to prevent various issues, such as crashes or major game-breaking bugs. Mods will be updated by the modpack developer when they see fit. Please do not update the mods in a modpack manually, unless specifically told to do so. This includes hitting the "update all" feature on CurseForge launcher it likes to bother users with.

To be clear; this is separate from updating the modpack (such as Better MC / Medieval MC) itself. You should always stay up to date with the latest version of the modpack. To update the pack correctly, you can follow the command!updatemodpack

The easiest way to downgrade mod versions to their original versions in the pack, is to reinstall the pack itself. Before you uninstall, back up both any singleplayer world files you have, and your map folder. LPS packs usually use JourneyMap or Xareos, the map folder will be named accordingly.

  • Curseforge -> Right click the modpack instance -> „Open Folder”.
  • ATLauncher -> Click „Open Folder” on the modpack instance.
  • PrismLauncher -> Select your instance and click „Folder” on the right.

Navigate to the "minecraft" folder, and within that will be "saves" and "journeymap"/"xareos" depending on which the pack has. Copy/Move these folders to a safe location, and you can move them right back to the fresh copy of the pack when reinstalled.

sand scaffoldBOT
#

h4meed, you just advanced to level 3

sand scaffoldBOT
#

nguyentu2004, you just advanced to level 1

sand scaffoldBOT
#

almaaaaaaaa0099, you just advanced to level 2

#

tonger, you just advanced to level 1

sand scaffoldBOT
#

x_inava, you just advanced to level 1

sand scaffoldBOT
#

GG @uncut timber , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

ughost29, you just advanced to level 3

#

mritachiuchiha, you just advanced to level 1

#

shinaii, you just advanced to level 3

sand scaffoldBOT
#

captivating_pony_20989, you just advanced to level 1

sand scaffoldBOT
#

juansho06, you just advanced to level 1

sand scaffoldBOT
#

GG @hardy crypt , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

sage9, you just advanced to level 1

#

dodo_holz, you just advanced to level 3

sand scaffoldBOT
#

GG @upbeat kettle , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

tycyclone.neon, you just advanced to level 1

sand scaffoldBOT
#

isoul22, you just advanced to level 1

#

x6ds, you just advanced to level 2

sand scaffoldBOT
#

bash350, you just advanced to level 1

sand scaffoldBOT
#

isoul22, you just advanced to level 2

sand scaffoldBOT
#

mcbinkle, you just advanced to level 2

sand scaffoldBOT
#

veendeetta, you just advanced to level 3

#

ms_moonlight25, you just advanced to level 1

#

nyxmix, you just advanced to level 2

haughty rivet
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

kailuni2, you just advanced to level 3

sand scaffoldBOT
#

lionfiregaming, you just advanced to level 1

sand scaffoldBOT
#

clay6371, you just advanced to level 1

#

jason_36388, you just advanced to level 1

sand scaffoldBOT
#

jrspritex, you just advanced to level 2

spice tulip
#

!ranks

#

!rank

sand scaffoldBOT
sand scaffoldBOT
#

ogpargon, you just advanced to level 7

sage flint
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

spice tulip
#

!arg

#

!commands

#

!list

#

!help

sand scaffoldBOT
#
Luna Pixel Studios Plugins Commands
**Birthdays**

</help:1145941150495162392> birthdays

**Giveaways**

</help:1145941150495162392> giveaways

**MEE6 AI**

</help:1145941150495162392> ai

**Levels**

</help:1145941150495162392> levels

**Moderator**

</help:1145941150495162392> moderator

**Emojis**

</help:1145941150495162392> emojis

**Achievements**

</help:1145941150495162392> achievements

spice tulip
#

f u too

sand scaffoldBOT
#

themythical, you just advanced to level 7

#

unknownpandabear, you just advanced to level 1

sand scaffoldBOT
#

GG @upbeat kettle , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

nigrita_monstr, you just advanced to level 1

#

constii_, you just advanced to level 3

#

the_pesmat, you just advanced to level 10

hardy crypt
#

!help

sand scaffoldBOT
#
Levels Plugin

Give your members XP and Levels when they send messages and rank them by activity in a leaderboard

</levels:1145941150495162394>
Get a link to the leaderboard

</rank:1145941150495162395> (optional member)
Get your rank or another member's rank

hardy crypt
#

/help levels

#

?

#

oh lol

#

/levels

#

bruh

#

!levels

sand scaffoldBOT
#

Here you go! 🧙‍♂️

hardy crypt
#

!serverpack

frank tuskBOT
#

If you are unable to find the serverpack on Curseforge, it is most likely not approved by Curseforge yet. If you want to create your own Server Pack follow the steps below;

How to create a Server Pack:

  1. Download ServerPackCreator and run it.
  2. Set the Modpack Directory to where you installed the modpack.
  3. Set the Minecraft Version, Modloader and Modloader Version of the Modpack.
  4. Press Generate.

How to use the Server Pack:

  1. Right click the start.ps1 file and click Run with Powershell.
  2. To join your own server, type localhost into Direct Connect.
    This video explains the process https://youtu.be/tLTC6wYcWVM
    The server IP address is your Public IP Address, which can be found by googling "my ip address".

If other players are unable to join, find a portforwarding guide online.

sand scaffoldBOT
#

quandrupledingle_nmt_aka_pizza, you just advanced to level 1

sand scaffoldBOT
#

sergiopd64, you just advanced to level 1

sand scaffoldBOT
#

itz_gaz25, you just advanced to level 1

#

btg5603, you just advanced to level 1

sand scaffoldBOT
#

yaqame, you just advanced to level 4

cold bane
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

cold bane
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

hardy crypt
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

hardy crypt
#

!ping

#

lame

sand scaffoldBOT
#

GG @quartz shore , you just unlocked the achievement: Casual Typer! 🥳

#

gekitsuu, you just advanced to level 1

sand scaffoldBOT
#

x_inava, you just advanced to level 2

sand scaffoldBOT
#

missweapon_, you just advanced to level 1

sand scaffoldBOT
#

stinkyfootcheese, you just advanced to level 1

sand scaffoldBOT
#

greymoorbynight, you just advanced to level 1

sand scaffoldBOT
#

greymoorbynight, you just advanced to level 2

#

.dodoshka, you just advanced to level 1

sand scaffoldBOT
#

smells_like_upgamer, you just advanced to level 3

grave basalt
#

!rank

sand scaffoldBOT
sand scaffoldBOT
#

Lurker, you just advanced to level 16

sand scaffoldBOT
#

sa2b, you just advanced to level 1

sand scaffoldBOT
#

skorika, you just advanced to level 1

sand scaffoldBOT
#

vools, you just advanced to level 1

sand scaffoldBOT
#

neoslayerx, you just advanced to level 3

sand scaffoldBOT
#

heatedtrouble67, you just advanced to level 1

hardy crypt
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

hardy crypt
#

!modified

frank tuskBOT
#

You are using a modified version of the modpack!

Adding, removing, or updating large amounts of mods without testing any of your changes is **not **a good idea, and it is very unlikely that anyone will want to debug your issue for you. Please test the changes you make in small groups, as opposed to doing all of the changes at once.

If you want further support for your issue, someone may respond to you in the channel for the modpack you based your changes off, but please only post once. You may also have better luck in #1061339968691257466.

sand scaffoldBOT
#

qlimax__, you just advanced to level 1

sand scaffoldBOT
#

GG @vernal hare , you just unlocked the achievement: Give or Take! 🥳

#

roguecaracal, you just advanced to level 2

sand scaffoldBOT
#

lopherboy, you just advanced to level 1

sand scaffoldBOT
#

GG @dark verge , you just unlocked the achievement: Chatter! 🥳

#

casual_panda, you just advanced to level 1

sand scaffoldBOT
#

dylanparry1, you just advanced to level 1

sand scaffoldBOT
#

walnuttuna77585, you just advanced to level 1

sand scaffoldBOT
#

harun (ping for reply), you just advanced to level 1

sand scaffoldBOT
#

lopherboy, you just advanced to level 2

#

caspertheflyingdutchman, you just advanced to level 2

sand scaffoldBOT
#

jason_36388, you just advanced to level 2

sand scaffoldBOT
#

pro4b, you just advanced to level 1

sand scaffoldBOT
#

bananaboinker, you just advanced to level 3

#

wcutts1111100111, you just advanced to level 1

sand scaffoldBOT
cold bane
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

cold bane
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

botbrendan, you just advanced to level 2

sand scaffoldBOT
#

ixeonni, you just advanced to level 1

sand scaffoldBOT
#

clearlynoob, you just advanced to level 1

sand scaffoldBOT
#

tiger.jj, you just advanced to level 1

sand scaffoldBOT
#

hugeoo_, you just advanced to level 1

sand scaffoldBOT
#

welojober, you just advanced to level 11

#

vaalenpa0711, you just advanced to level 1

sand scaffoldBOT
#

rustysinner, you just advanced to level 1

sand scaffoldBOT
#

serial17, you just advanced to level 1

sand scaffoldBOT
#

_aveira, you just advanced to level 1

vital panther
#

4196

#

4196

sand scaffoldBOT
#

blackbirrd03, you just advanced to level 2

sand scaffoldBOT
#

codedecrypt, you just advanced to level 2

#

GG @deep ivy , you just unlocked the achievement: Casual Typer! 🥳

#

avocado4583, you just advanced to level 1

sand scaffoldBOT
#

doubleface1369, you just advanced to level 9

sand scaffoldBOT
#

x1press, you just advanced to level 2

#

axofrog, you just advanced to level 1

#

dashoo_xd, you just advanced to level 1

#

dashoo_xd, you just advanced to level 2

dark lantern
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

dark lantern
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

ameliaswoorld, you just advanced to level 1

#

klavs, you just advanced to level 1

sand scaffoldBOT
#

toprak7850, you just advanced to level 2

sand scaffoldBOT
#

messerjocke1892, you just advanced to level 1

harsh wasp
#

!alternatives

#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

messerjocke1892, you just advanced to level 2

sand scaffoldBOT
#

crypotia, you just advanced to level 9

#

sokaiin, you just advanced to level 2

grave basalt
#

!updatemodpack

frank tuskBOT
#

To properly update the modpack you're playing, it depends on the launcher you are using. This video can explains it on CurseForge launcher, and the same method can be used on other launchers as well, but it's not necessary to use this method on others.

  • CurseForge - See above video

  • PrismLauncher -> Select your instance, and click "Edit" on the right. the 3rd tab down will say "CurseForge", click on it, and there will be a dropdown menu, if not already selected, the latest version of the pack will be at the top of it. click "Update Pack". Sometimes there will be new mods to manually download due to liscensing issues, click "Open Missing" and it will automatically download and checked, and copied to the instance folder. It's safe to delete these mods in your downloads folder once done. Once all are detected, the "Open Missing" will be grayed out. You can click 'Continue" at this point, and it will finish the update process and tell you when its successful.

  • ATLauncher - Under the "Instances" tab, find the pack you would like to update. there will be an "Update" button. There will be a dropdown menu, and if not already selected, the latest version of the pack will be at the top of it to select. Click "Update" once selected. Sometimes there will be new mods to manually download due to licensing issues, click "Open Missing" and it will automatically download and checked, and copied to the instance folder. It's safe to delete these mods in your downloads folder once done. Once all are detected, You can click "OK ", and it will finish the update process.

sand scaffoldBOT
#

colourmedifferent, you just advanced to level 1

#

clearlynoob, you just advanced to level 2

#

haylie_., you just advanced to level 2

sand scaffoldBOT
#

GG @bold venture , you just unlocked the achievement: Chatter! 🥳

sand scaffoldBOT
#

jairsrey, you just advanced to level 1

sand scaffoldBOT
#

detailsforthedevil, you just advanced to level 1

sand scaffoldBOT
#

bandagebob, you just advanced to level 2

steady elk
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

yuu1256, you just advanced to level 1

sand scaffoldBOT
#

GG @finite haven , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

tiffcasper04, you just advanced to level 1

sand scaffoldBOT
#

theonlyarctice, you just advanced to level 1

sand scaffoldBOT
#

youngleo4465, you just advanced to level 1

sand scaffoldBOT
#

samyquaver123, you just advanced to level 2

#

crazykpyro, you just advanced to level 1

sand scaffoldBOT
#

GG @bold venture , you just unlocked the achievement: Stay Awhile and Listen! 🥳

#

crazyneonstorm, you just advanced to level 1

sand scaffoldBOT
#

ymir_99, you just advanced to level 2

#

undeadsf, you just advanced to level 4

#

GG @oblique nebula , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

danglingpointer_, you just advanced to level 1

#

x6ds, you just advanced to level 3

#

mofilia, you just advanced to level 2

sand scaffoldBOT
#

person7360, you just advanced to level 1

sand scaffoldBOT
#

therealahuman01, you just advanced to level 1

pale echo
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

GG @winged stump , you just unlocked the achievement: Give or Take! 🥳

#

GG @heavy trout , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

apparentlypast, you just advanced to level 1

sand scaffoldBOT
#

chiefsosa._, you just advanced to level 1

sand scaffoldBOT
#

chiefsosa._, you just advanced to level 2

#

axofrog, you just advanced to level 2

sand scaffoldBOT
#

slooshpuppee, you just advanced to level 1

#

diaisbroken, you just advanced to level 1

sand scaffoldBOT
#

dreymos, you just advanced to level 5

restive beacon
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

akpotatosquasher_04631, you just advanced to level 1

#

dreymos, you just advanced to level 6

sand scaffoldBOT
#

isaidspinmov, you just advanced to level 1

sand scaffoldBOT
#

gaobroo, you just advanced to level 1

#

huetete, you just advanced to level 1

sand scaffoldBOT
#

zabbo_91380, you just advanced to level 1

sand scaffoldBOT
#

GG @ruby tide , you just unlocked the achievement: Fire Starter! 🥳

sand scaffoldBOT
#

dreymos, you just advanced to level 7

sand scaffoldBOT
#

pokemonrock350, you just advanced to level 1

sand scaffoldBOT
#

justsomebeans., you just advanced to level 3

sand scaffoldBOT
#

elitescouter, you just advanced to level 4

sand scaffoldBOT
#

ro161012, you just advanced to level 6

sand scaffoldBOT
#

guerrerocamilo21, you just advanced to level 1

sand scaffoldBOT
#

desv1979, you just advanced to level 9

sand scaffoldBOT
#

constii_, you just advanced to level 4

#

GG @sage crater , you just unlocked the achievement: Casual Typer! 🥳

#

diaisbroken, you just advanced to level 2

#

constii_, you just advanced to level 5

#

theonlyarctice, you just advanced to level 2

#

diaisbroken, you just advanced to level 3

#

jecti, you just advanced to level 2

#

GG @cinder panther , you just unlocked the achievement: Give or Take! 🥳

#

theonlyarctice, you just advanced to level 3

#

diaisbroken, you just advanced to level 4

#

GG @gray loom , you just unlocked the achievement: Casual Typer! 🥳

#

flabbster, you just advanced to level 4

#

GG @cinder panther , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

GG @spark charm , you just unlocked the achievement: Casual Typer! 🥳

#

diaisbroken, you just advanced to level 5

#

GG @tiny garnet , you just unlocked the achievement: Give or Take! 🥳

#

theonlyarctice, you just advanced to level 4

#

jonacloud, you just advanced to level 1

sand scaffoldBOT
#

diaisbroken, you just advanced to level 6

sand scaffoldBOT
#

belkan_, you just advanced to level 1

grave basalt
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

paintedtarot, you just advanced to level 1

sand scaffoldBOT
#

relief_valve, you just advanced to level 1

#

polymerq, you just advanced to level 19

sand scaffoldBOT
#

tsarenir, you just advanced to level 2

sand scaffoldBOT
#

chase0035, you just advanced to level 1

sand scaffoldBOT
#

saadching, you just advanced to level 1

sand scaffoldBOT
#

GG @sacred lotus , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

yaboipatryk911, you just advanced to level 1

sand scaffoldBOT
#

asjaden, you just advanced to level 1

sand scaffoldBOT
#

alianei, you just advanced to level 1

sand scaffoldBOT
#

aq1558, you just advanced to level 1

#

astolenusername, you just advanced to level 1

sand scaffoldBOT
#

hyprlande, you just advanced to level 1

#

hiddentruevalue, you just advanced to level 1

sand scaffoldBOT
#

_fayze., you just advanced to level 1

#

Ari ( ping me ), you just advanced to level 8

sand scaffoldBOT
#

mmdeathknight, you just advanced to level 4

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

izrul74, you just advanced to level 1

#

itsjache, you just advanced to level 1

sand scaffoldBOT
#

izrul74, you just advanced to level 2

#

hugs4reze, you just advanced to level 1

sand scaffoldBOT
#

.alberik123, you just advanced to level 2

sand scaffoldBOT
#

vales066, you just advanced to level 1

#

GG @obtuse anvil , you just unlocked the achievement: Casual Typer! 🥳

#

harukoaru, you just advanced to level 6

sand scaffoldBOT
#

pretty.in.pastel, you just advanced to level 1

sand scaffoldBOT
#

anx_4z, you just advanced to level 1

sand scaffoldBOT
#

alphaispro., you just advanced to level 5

sand scaffoldBOT
#

runningsolojr, you just advanced to level 3

sand scaffoldBOT
#

darkarth07, you just advanced to level 1

sand scaffoldBOT
#

GG @deep ivy , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

darkarth07, you just advanced to level 2

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

n0cturnee1, you just advanced to level 1

sand scaffoldBOT
#

orbiterxd, you just advanced to level 1

sand scaffoldBOT
#

sokaiin, you just advanced to level 3

#

tudor_g1, you just advanced to level 1

sand scaffoldBOT
#

thanhbinh10, you just advanced to level 1

sand scaffoldBOT
#

jonacloud, you just advanced to level 2

sand scaffoldBOT
#

m4ximum_, you just advanced to level 1

sand scaffoldBOT
#

_bluewaterhim_44679, you just advanced to level 1

#

joshdaa, you just advanced to level 1

#

vales066, you just advanced to level 2

sand scaffoldBOT
#

_bluewaterhim_44679, you just advanced to level 2

#

always_taco, you just advanced to level 4

#

zuz, you just advanced to level 1

sand scaffoldBOT
#

solomon5324, you just advanced to level 1

#

kleyten, you just advanced to level 1

sand scaffoldBOT
#

shadow.blossom, you just advanced to level 1

#

d24pancake_80341, you just advanced to level 1

sand scaffoldBOT
#

cracked_bot, you just advanced to level 1

#

joshdaa, you just advanced to level 2

sand scaffoldBOT
#

omega145, you just advanced to level 1

#

gael0808., you just advanced to level 2

sand scaffoldBOT
#

Mr.sir, you just advanced to level 1

sand scaffoldBOT
#

zero019d, you just advanced to level 1

sand scaffoldBOT
#

rztdd, you just advanced to level 1

sand scaffoldBOT
#

xenosbe, you just advanced to level 1

#

gbbsyy, you just advanced to level 1

sand scaffoldBOT
#

icekilla3, you just advanced to level 1

#

kylynazur, you just advanced to level 3

#

mackintoosh, you just advanced to level 1

mint willow
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

emissary_heaven, you just advanced to level 2

sand scaffoldBOT
#

earnestxd, you just advanced to level 2

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

xlauren_505, you just advanced to level 1

sand scaffoldBOT
#

pupquasars, you just advanced to level 1

sand scaffoldBOT
#

dogendo, you just advanced to level 1

sand scaffoldBOT
#

slooshpuppee, you just advanced to level 2

sand scaffoldBOT
#

nevii, you just advanced to level 1

sand scaffoldBOT
#

thegreatradishofwisdom, you just advanced to level 1

#

lordsebh, you just advanced to level 1

sand scaffoldBOT
#

duszkiss, you just advanced to level 1

sand scaffoldBOT
#

minol, you just advanced to level 1

ripe relic
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

vales066, you just advanced to level 3

sand scaffoldBOT
#

gauzyer_5533, you just advanced to level 1

sand scaffoldBOT
#

handy_andy1355, you just advanced to level 1

sand scaffoldBOT
#

astolenusername, you just advanced to level 2

#

tudor_g1, you just advanced to level 2

sand scaffoldBOT
#

theforestbois, you just advanced to level 1

quiet bay
#

;

#

hello?

#

i need some help

grim trout
frank tuskBOT
#

If someone is around who can help, it's better if they can see the full question.
Instead of asking
Is someone around who can help me?
Ask
How do I fix this crash?
This gets you a faster response and prevents wasting time.

grim trout
#

also, wrong channel for support

sand scaffoldBOT
#

crazykpyro, you just advanced to level 2

snow iris
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

rose sleet
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

daviticha, you just advanced to level 2

#

randomizzatore, you just advanced to level 1

sand scaffoldBOT
#

GG @tough grail , you just unlocked the achievement: Chatter! 🥳

sand scaffoldBOT
#

dai.gurren, you just advanced to level 2

normal steppe
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

greymoorbynight, you just advanced to level 3

#

_fayze., you just advanced to level 2

valid plank
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

valid plank
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

hexthat, you just advanced to level 3

sand scaffoldBOT
#

huetete, you just advanced to level 2

sand scaffoldBOT
#

7offee, you just advanced to level 1

sand scaffoldBOT
#

.perpp, you just advanced to level 1

sand scaffoldBOT
#

no, you just advanced to level 1

sand scaffoldBOT
#

vrus0188, you just advanced to level 3

#

hazel (ping for mac), you just advanced to level 44

brittle hill
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

b4kt, you just advanced to level 6

high heath
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

GG @fringe glen , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

rztdd, you just advanced to level 2

sand scaffoldBOT
#

finalcarter, you just advanced to level 1

zealous cosmos
#

?wiki

sand scaffoldBOT
#

squ4rzy, you just advanced to level 3

sand scaffoldBOT
#

vspsycho, you just advanced to level 1

sand scaffoldBOT
#

croxvc, you just advanced to level 1

#

slipkangourou, you just advanced to level 4

sand scaffoldBOT
#

harukoaru, you just advanced to level 7

sand scaffoldBOT
#

solsstice, you just advanced to level 1

sand scaffoldBOT
#

polarisgames, you just advanced to level 11

sand scaffoldBOT
#

ivyzard._03034, you just advanced to level 3

sand scaffoldBOT
#

_itbeme, you just advanced to level 1

sand scaffoldBOT
#

darkhangaziz, you just advanced to level 1

sand scaffoldBOT
#

matixoxi, you just advanced to level 2

sand scaffoldBOT
#

unheardjack, you just advanced to level 1

sand scaffoldBOT
#

GG @dense python , you just unlocked the achievement: Casual Typer! 🥳

vestal knot
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

unheardjack, you just advanced to level 2

sand scaffoldBOT
#

wardiant, you just advanced to level 1

wild mango
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

wild mango
#

Anything to address server connection issues?

sand scaffoldBOT
#

ratc0on, you just advanced to level 1

#

red_gamer06, you just advanced to level 1

cloud widget
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

drasnoc, you just advanced to level 1

#

themythical, you just advanced to level 8

sand scaffoldBOT
#

lesbianvampyr, you just advanced to level 1

sand scaffoldBOT
#

biggeth, you just advanced to level 1

sand scaffoldBOT
#

jayci._, you just advanced to level 1

mint valley
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

cherry_alexx, you just advanced to level 1

sand scaffoldBOT
#

dagdathedruid, you just advanced to level 4

#

botato560_60077, you just advanced to level 1

#

stinkyfootcheese, you just advanced to level 2

#

greekfire24app, you just advanced to level 3

sand scaffoldBOT
#

hg_miner_, you just advanced to level 1

#

proximitive, you just advanced to level 1

sand scaffoldBOT
#

mateus2k2, you just advanced to level 1

sand scaffoldBOT
#

ruvan, you just advanced to level 2

#

gerhard_north, you just advanced to level 3

sand scaffoldBOT
#

chrispboi_, you just advanced to level 1

sand scaffoldBOT
#

yuvo_0, you just advanced to level 1

#

Lurker, you just advanced to level 17

sand scaffoldBOT
#

gameking1happy, you just advanced to level 14

#

unheardjack, you just advanced to level 3

sand scaffoldBOT
#

takilow, you just advanced to level 1

sand scaffoldBOT
#

pisceous, you just advanced to level 1

#

utschitscha, you just advanced to level 1

#

retrigg., you just advanced to level 3

sand scaffoldBOT
#

k1tsuu., you just advanced to level 1

#

tacticaluav, you just advanced to level 4

sand scaffoldBOT
#

sezuel, you just advanced to level 1

#

neoslayerx, you just advanced to level 4

#

sus2trappy, you just advanced to level 1

#

ehk0z, you just advanced to level 1

#

sharifballerkid, you just advanced to level 1

#

takilow, you just advanced to level 2

#

ehk0z, you just advanced to level 2

sand scaffoldBOT
#

notwaavfr, you just advanced to level 1

sand scaffoldBOT
#

17skip, you just advanced to level 1

old mantle
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

round slate
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

genarkcraft8004, you just advanced to level 2

sand scaffoldBOT
#

mr.greenbud, you just advanced to level 1

sand scaffoldBOT
#

noxol., you just advanced to level 3

sand scaffoldBOT
#

reuzehagel, you just advanced to level 2

sand scaffoldBOT
#

jukebox_48, you just advanced to level 1

sand scaffoldBOT
#

dorbon, you just advanced to level 4

sand scaffoldBOT
#

velho8442, you just advanced to level 1

sand scaffoldBOT
#

esqiso, you just advanced to level 1

#

chaza, you just advanced to level 1

sand scaffoldBOT
#

kumoisthename, you just advanced to level 1

sand scaffoldBOT
#

the_tree4721, you just advanced to level 1

sand scaffoldBOT
#

iveelblack, you just advanced to level 1

#

the_tree4721, you just advanced to level 2

#

jez., you just advanced to level 2

#

otters4life, you just advanced to level 1

sand scaffoldBOT
#

bloxiteers, you just advanced to level 1

sand scaffoldBOT
#

boitastro, you just advanced to level 1

#

oddcircus, you just advanced to level 1

#

.lulon, you just advanced to level 1

#

17skip, you just advanced to level 2

#

GG @idle blade , you just unlocked the achievement: Give or Take! 🥳

hushed heron
#

!updatemods

frank tuskBOT
#

Do NOT Update Mods Manually!

Modpacks use specific versions of certain mods to prevent various issues, such as crashes or major game-breaking bugs. Mods will be updated by the modpack developer when they see fit. Please do not update the mods in a modpack manually, unless specifically told to do so. This includes hitting the "update all" feature on CurseForge launcher it likes to bother users with.

To be clear; this is separate from updating the modpack (such as Better MC / Medieval MC) itself. You should always stay up to date with the latest version of the modpack. To update the pack correctly, you can follow the command!updatemodpack

The easiest way to downgrade mod versions to their original versions in the pack, is to reinstall the pack itself. Before you uninstall, back up both any singleplayer world files you have, and your map folder. LPS packs usually use JourneyMap or Xareos, the map folder will be named accordingly.

  • Curseforge -> Right click the modpack instance -> „Open Folder”.
  • ATLauncher -> Click „Open Folder” on the modpack instance.
  • PrismLauncher -> Select your instance and click „Folder” on the right.

Navigate to the "minecraft" folder, and within that will be "saves" and "journeymap"/"xareos" depending on which the pack has. Copy/Move these folders to a safe location, and you can move them right back to the fresh copy of the pack when reinstalled.

reef linden
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

grafi, you just advanced to level 1

#

.lulon, you just advanced to level 2

sand scaffoldBOT
#

otters4life, you just advanced to level 2

#

acharpentier, you just advanced to level 2

sand scaffoldBOT
#

rarec_, you just advanced to level 5

sand scaffoldBOT
#

certified_smol, you just advanced to level 1

sand scaffoldBOT
#

sleepy_zenith, you just advanced to level 1

sand scaffoldBOT
#

goopi141, you just advanced to level 1

sand scaffoldBOT
#

bloxiteers, you just advanced to level 2

sand scaffoldBOT
#

gastly, you just advanced to level 1

sand scaffoldBOT
#

harukoaru, you just advanced to level 8

sand scaffoldBOT
#

doomdayoverlord, you just advanced to level 5

sand scaffoldBOT
#

tdt_plays, you just advanced to level 1

sand scaffoldBOT
#

GG @digital token , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

viegoruined, you just advanced to level 5

safe moon
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

gon_san., you just advanced to level 1

fringe depot
#

!macjdk

frank tuskBOT
#

Moon For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs

There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:

  1. Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
  2. Run the !alternates command in #bots and follow the directions. If you already have ATL installed, move on to step 3.
  3. Click "Settings" on the right
  4. Click "Java/Minecraft" at the top
  5. Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
  6. Manually specify the following Java path in the text box to the left to the "Reset" button: /Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
fringe depot
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

vrman2008, you just advanced to level 1

#

rosery_qt, you just advanced to level 1

#

elchodo, you just advanced to level 1

sand scaffoldBOT
#

lightbulbxciv, you just advanced to level 1

sand scaffoldBOT
#

corbintheminer, you just advanced to level 1

sand scaffoldBOT
#

lemonthugcatmeow, you just advanced to level 1

sand scaffoldBOT
#

redsavesquare, you just advanced to level 1

sand scaffoldBOT
#

ernand., you just advanced to level 4

sand scaffoldBOT
#

koi09654, you just advanced to level 7

sand scaffoldBOT
#

blueemp69, you just advanced to level 1

sand scaffoldBOT
#

dragon_tom, you just advanced to level 5

sand scaffoldBOT
#

crazyneonstorm, you just advanced to level 2

sand scaffoldBOT
#

flamety, you just advanced to level 1

sand scaffoldBOT
#

wazid0949, you just advanced to level 1

sand scaffoldBOT
#

ovumo, you just advanced to level 4

sand scaffoldBOT
#

genarkcraft8004, you just advanced to level 3

sand scaffoldBOT
#

the_tree4721, you just advanced to level 3

#

haqiman, you just advanced to level 6

#

kurwank3r, you just advanced to level 1

sand scaffoldBOT
#

ikellino75, you just advanced to level 3

#

daaababy, you just advanced to level 1

sand scaffoldBOT
#

reachr, you just advanced to level 1

sand scaffoldBOT
#

derkurier, you just advanced to level 2

sand scaffoldBOT
#

unheardjack, you just advanced to level 4

#

42onlytruth, you just advanced to level 1

#

swellerabyss677, you just advanced to level 7

sand scaffoldBOT
#

GG @dense wraith , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

vales066, you just advanced to level 4

sand scaffoldBOT
#

sol.ution, you just advanced to level 1

#

crazykpyro, you just advanced to level 3

sand scaffoldBOT
#

GG @cobalt mirage , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

rztdd, you just advanced to level 3

sand scaffoldBOT
#

23ju, you just advanced to level 4

tiny raptor
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

xzrieo, you just advanced to level 1

#

dedaf, you just advanced to level 2

sand scaffoldBOT
#

anx_4z, you just advanced to level 2

sand scaffoldBOT
#

noxol., you just advanced to level 4

#

cludexd, you just advanced to level 1

sand scaffoldBOT
#

btoc, you just advanced to level 2

sand scaffoldBOT
#

cludexd, you just advanced to level 2

sand scaffoldBOT
#

vrus0188, you just advanced to level 4

sand scaffoldBOT
#

rubent162000, you just advanced to level 1

#

frej_aa1, you just advanced to level 1

sand scaffoldBOT
#

nfnosferato, you just advanced to level 1

#

cludexd, you just advanced to level 3

sand scaffoldBOT
#

desperate_1999, you just advanced to level 1

#

GG @summer maple , you just unlocked the achievement: Chatter! 🥳

#

GG @summer maple , you just unlocked the achievement: Stay Awhile and Listen! 🥳

sand scaffoldBOT
#

zoruva_07, you just advanced to level 1

sand scaffoldBOT
#

proximitive, you just advanced to level 2

sand scaffoldBOT
#

Jake | BisectHosting, you just advanced to level 1

#

twlmgamming, you just advanced to level 1

sand scaffoldBOT
#

jkoifish, you just advanced to level 1

dreamy helm
#

!alternatives

#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

twlmgamming, you just advanced to level 2

drifting escarp
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

peak fiber
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

quaint shale
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

mobysoho, you just advanced to level 4

soft flicker
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

soft flicker
#

!update

#

!help

sand scaffoldBOT
#
Luna Pixel Studios Plugins Commands
**Birthdays**

</help:1145941150495162392> birthdays

**Giveaways**

</help:1145941150495162392> giveaways

**MEE6 AI**

</help:1145941150495162392> ai

**Levels**

</help:1145941150495162392> levels

**Moderator**

</help:1145941150495162392> moderator

**Emojis**

</help:1145941150495162392> emojis

**Achievements**

</help:1145941150495162392> achievements

sand scaffoldBOT
#

studioix, you just advanced to level 1

sand scaffoldBOT
#

GG @lusty timber , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

kidlucky, you just advanced to level 1

sand scaffoldBOT
#

studioix, you just advanced to level 2

#

noxol., you just advanced to level 5

sand scaffoldBOT
#

crazykpyro, you just advanced to level 4

marble swift
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

studioix, you just advanced to level 3

#

mafien0, you just advanced to level 2

sand scaffoldBOT
#

GG @eternal rune , you just unlocked the achievement: Give or Take! 🥳

#

Archer, you just advanced to level 1

paper tinsel
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

oowuuowo, you just advanced to level 4

sand scaffoldBOT
#

towerdefender99, you just advanced to level 1

#

hhhhhhhikari, you just advanced to level 3

sand scaffoldBOT
#

smoovii_, you just advanced to level 1

sand scaffoldBOT
#

smoovii_, you just advanced to level 2

sand scaffoldBOT
#

alexmartz., you just advanced to level 2

#

aquatic0, you just advanced to level 2

#

btoc, you just advanced to level 3

sand scaffoldBOT
#

letdown., you just advanced to level 2

sand scaffoldBOT
#

mineingwizard, you just advanced to level 1

sand scaffoldBOT
#

towerdefender99, you just advanced to level 2

#

sir_clown14, you just advanced to level 1

#

amena0007, you just advanced to level 2

#

scorch_zx, you just advanced to level 1

#

nico0303, you just advanced to level 1

#

x6ds, you just advanced to level 4

#

dedaf, you just advanced to level 3

#

flamety, you just advanced to level 2

sand scaffoldBOT
#

m4ximum_, you just advanced to level 2

sand scaffoldBOT
#

buturia, you just advanced to level 2

sand scaffoldBOT
#

prison.soap, you just advanced to level 1

sand scaffoldBOT
#

mibitheeggsandwichwarrior, you just advanced to level 1

#

vales066, you just advanced to level 5

sand scaffoldBOT
#

GG @median remnant , you just unlocked the achievement: Casual Typer! 🥳

final briar
#

!updatemods

frank tuskBOT
#

Do NOT Update Mods Manually!

Modpacks use specific versions of certain mods to prevent various issues, such as crashes or major game-breaking bugs. Mods will be updated by the modpack developer when they see fit. Please do not update the mods in a modpack manually, unless specifically told to do so. This includes hitting the "update all" feature on CurseForge launcher it likes to bother users with.

To be clear; this is separate from updating the modpack (such as Better MC / Medieval MC) itself. You should always stay up to date with the latest version of the modpack. To update the pack correctly, you can follow the command!updatemodpack

The easiest way to downgrade mod versions to their original versions in the pack, is to reinstall the pack itself. Before you uninstall, back up both any singleplayer world files you have, and your map folder. LPS packs usually use JourneyMap or Xareos, the map folder will be named accordingly.

  • Curseforge -> Right click the modpack instance -> „Open Folder”.
  • ATLauncher -> Click „Open Folder” on the modpack instance.
  • PrismLauncher -> Select your instance and click „Folder” on the right.

Navigate to the "minecraft" folder, and within that will be "saves" and "journeymap"/"xareos" depending on which the pack has. Copy/Move these folders to a safe location, and you can move them right back to the fresh copy of the pack when reinstalled.

sand scaffoldBOT
#

marianol, you just advanced to level 1

sand scaffoldBOT
#

GG @slim tinsel , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

justsomebeans., you just advanced to level 4

#

GG @bronze plume , you just unlocked the achievement: Stay Awhile and Listen! 🥳

sand scaffoldBOT
#

reikvel, you just advanced to level 2

#

tugkandeman, you just advanced to level 3

digital sleet
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

daaababy, you just advanced to level 2

#

taintaster, you just advanced to level 1

sly crest
#

!eserver

#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

nayamori, you just advanced to level 1

sand scaffoldBOT
#

papabear1994, you just advanced to level 1

zealous adder
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

jujuki3361, you just advanced to level 1

sand scaffoldBOT
#

yugokueshin, you just advanced to level 1

sand scaffoldBOT
#

smoovii_, you just advanced to level 3

sand scaffoldBOT
#

smoovii_, you just advanced to level 4

#

dorbon, you just advanced to level 5

sand scaffoldBOT
#

harukoaru, you just advanced to level 9

vital violet
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

vital violet
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

benjama01, you just advanced to level 1

sand scaffoldBOT
#

exorciyst, you just advanced to level 1

sand scaffoldBOT
#

GG @idle blade , you just unlocked the achievement: Casual Typer! 🥳

fallen totem
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

drakeyy., you just advanced to level 1

sand scaffoldBOT
#

mesty60, you just advanced to level 1

sand scaffoldBOT
#

.justjellybean, you just advanced to level 1

sand scaffoldBOT
#

itzz_max, you just advanced to level 1

#

qyotootoyq, you just advanced to level 1

sand scaffoldBOT
#

martinkrav, you just advanced to level 1

pearl quail
#

!updatemods

frank tuskBOT
#

Do NOT Update Mods Manually!

Modpacks use specific versions of certain mods to prevent various issues, such as crashes or major game-breaking bugs. Mods will be updated by the modpack developer when they see fit. Please do not update the mods in a modpack manually, unless specifically told to do so. This includes hitting the "update all" feature on CurseForge launcher it likes to bother users with.

To be clear; this is separate from updating the modpack (such as Better MC / Medieval MC) itself. You should always stay up to date with the latest version of the modpack. To update the pack correctly, you can follow the command!updatemodpack

The easiest way to downgrade mod versions to their original versions in the pack, is to reinstall the pack itself. Before you uninstall, back up both any singleplayer world files you have, and your map folder. LPS packs usually use JourneyMap or Xareos, the map folder will be named accordingly.

  • Curseforge -> Right click the modpack instance -> „Open Folder”.
  • ATLauncher -> Click „Open Folder” on the modpack instance.
  • PrismLauncher -> Select your instance and click „Folder” on the right.

Navigate to the "minecraft" folder, and within that will be "saves" and "journeymap"/"xareos" depending on which the pack has. Copy/Move these folders to a safe location, and you can move them right back to the fresh copy of the pack when reinstalled.

sand scaffoldBOT
#

akh1701, you just advanced to level 1

sand scaffoldBOT
#

von2tired, you just advanced to level 1

sand scaffoldBOT
#

wiliestocto, you just advanced to level 1

sand scaffoldBOT
#

zyxxil, you just advanced to level 1

sand scaffoldBOT
#

prison.soap, you just advanced to level 2

sly cape
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

oddcircus, you just advanced to level 2

sand scaffoldBOT
#

eyesopropyll, you just advanced to level 1

sand scaffoldBOT
#

gardnergnome, you just advanced to level 1

quartz glacier
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

grim trout
#

!vc

frank tuskBOT
#

Voice chat mod is disabled by default on Bisect servers due to it causing a crash if you're not using a dedicated IP (this is majority of budget servers). Generally all that needs doing to re-enable it is removing the .d from the end of the voice chat mod file (Assuming you have a Dedicated IP + UDP is enabled on the panel).
Then update the port in the voice chat server config. The server will crash if voice chat is running on a port not allocated to the server. https://www.bisecthosting.com/clients/index.php?rp=/knowledgebase/198/How-to-set-up-voice-chat-on-a-ForgeorFabricorSpigot-Minecraft-server.html

sand scaffoldBOT
#

gastly, you just advanced to level 2

sand scaffoldBOT
#

grimmace., you just advanced to level 9

sand scaffoldBOT
#

soundsdotzip, you just advanced to level 1

sand scaffoldBOT
#

GG @mild lake , you just unlocked the achievement: True Star! 🥳

mild lake
#

?

sand scaffoldBOT
#

soundsdotzip, you just advanced to level 2

sand scaffoldBOT
#

vrus0188, you just advanced to level 5

#

GG @hard orchid , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

koootenai, you just advanced to level 1

#

vales066, you just advanced to level 6

#

erictan0223, you just advanced to level 1

#

ogpargon, you just advanced to level 8

azure rampart
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

towerdefender99, you just advanced to level 3

sand scaffoldBOT
#

nozzle22, you just advanced to level 1

#

dedaf, you just advanced to level 4

sand scaffoldBOT
#

zyxxil, you just advanced to level 2

buoyant stirrup
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

Haph, you just advanced to level 1

sand scaffoldBOT
#

thricebite, you just advanced to level 17

sand scaffoldBOT
#

balakay1212, you just advanced to level 1

sand scaffoldBOT
#

christopher_collazo, you just advanced to level 1

sand scaffoldBOT
#

kanye1539, you just advanced to level 2

sand scaffoldBOT
#

crazyneonstorm, you just advanced to level 3

lavish imp
#

!wsfull

frank tuskBOT
#

Moon World Sharing servers are likely currently at capacity

If you or your friend are receiving an error such as "An error occurred in Luna", or "Connection refused: no further information" when trying to play through "Open to LAN" or "Share World", it's likely that Luna's servers (used for world sharing) are currently full. We don't have a way to notify you when slots on our servers free up, but you are welcome to try again later.

We understand and recognize that this may be inconvenient, so we recommend in this case to host or rent your own server. Self-hosting is free, for more information on hosting options, type !server in #bots.

Please note as well that this is a static command, it does not change/know when servers are full or not

lavish imp
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

gremlin02610, you just advanced to level 1

sand scaffoldBOT
#

imnotbro_, you just advanced to level 1

#

smz2004, you just advanced to level 1

sand scaffoldBOT
#

hispanicbeans, you just advanced to level 1

#

whims., you just advanced to level 1

sand scaffoldBOT
#

xx.devilish_charmer.xx, you just advanced to level 2

sand scaffoldBOT
#

studioix, you just advanced to level 4

sand scaffoldBOT
#

realgamestv, you just advanced to level 1

sand scaffoldBOT
#

shadyyyy_, you just advanced to level 34

sand scaffoldBOT
#

dikkevettevis, you just advanced to level 1

sand scaffoldBOT
#

doubleface1369, you just advanced to level 10

sand scaffoldBOT
#

pisobraha, you just advanced to level 1

sand scaffoldBOT
#

legendwale, you just advanced to level 4

#

faddix, you just advanced to level 1

#

cachipower, you just advanced to level 1

sand scaffoldBOT
#

guppyfart., you just advanced to level 3

#

smz2004, you just advanced to level 2

sand scaffoldBOT
#

.sugarpink, you just advanced to level 5

#

towerdefender99, you just advanced to level 4

#

7r3_, you just advanced to level 1

#

7r3_, you just advanced to level 2

#

satansghoul666, you just advanced to level 1

indigo mauve
#

!updatemodpack

frank tuskBOT
#

To properly update the modpack you're playing, it depends on the launcher you are using. This video can explains it on CurseForge launcher, and the same method can be used on other launchers as well, but it's not necessary to use this method on others.

  • CurseForge - See above video

  • PrismLauncher -> Select your instance, and click "Edit" on the right. the 3rd tab down will say "CurseForge", click on it, and there will be a dropdown menu, if not already selected, the latest version of the pack will be at the top of it. click "Update Pack". Sometimes there will be new mods to manually download due to liscensing issues, click "Open Missing" and it will automatically download and checked, and copied to the instance folder. It's safe to delete these mods in your downloads folder once done. Once all are detected, the "Open Missing" will be grayed out. You can click 'Continue" at this point, and it will finish the update process and tell you when its successful.

  • ATLauncher - Under the "Instances" tab, find the pack you would like to update. there will be an "Update" button. There will be a dropdown menu, and if not already selected, the latest version of the pack will be at the top of it to select. Click "Update" once selected. Sometimes there will be new mods to manually download due to licensing issues, click "Open Missing" and it will automatically download and checked, and copied to the instance folder. It's safe to delete these mods in your downloads folder once done. Once all are detected, You can click "OK ", and it will finish the update process.

sand scaffoldBOT
#

eyesopropyll, you just advanced to level 2

sand scaffoldBOT
#

GG @white kayak , you just unlocked the achievement: Give or Take! 🥳

#

mateus2k2, you just advanced to level 2

sand scaffoldBOT
#

mmdeathknight, you just advanced to level 5

sand scaffoldBOT
#

thisisakaza, you just advanced to level 1

sand scaffoldBOT
#

valdinii, you just advanced to level 1

#

serkan6pack, you just advanced to level 1

sand scaffoldBOT
#

cHin4916, you just advanced to level 33

#

gremlin02610, you just advanced to level 2

sand scaffoldBOT
#

smz2004, you just advanced to level 3

sand scaffoldBOT
#

xclusive.69, you just advanced to level 1

rose sentinel
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

crazykpyro, you just advanced to level 5

#

asherzz_0, you just advanced to level 1

sand scaffoldBOT
#

kurrohige, you just advanced to level 1

sand scaffoldBOT
#

jordanmogus, you just advanced to level 1

sand scaffoldBOT
#

GG @granite moon , you just unlocked the achievement: Casual Typer! 🥳

#

kaimal, you just advanced to level 4

sand scaffoldBOT
#

nenume00akap69xd, you just advanced to level 1

sand scaffoldBOT
#

rowan_2025, you just advanced to level 1

sand scaffoldBOT
#

just_y0um1, you just advanced to level 1

sand scaffoldBOT
#

thedodoschannel, you just advanced to level 2

#

rowan_2025, you just advanced to level 2

sand scaffoldBOT
#

GG @dense python , you just unlocked the achievement: Give or Take! 🥳

#

goopi141, you just advanced to level 2

#

neonowy_, you just advanced to level 1

#

pinkius, you just advanced to level 1

sand scaffoldBOT
#

rowan_2025, you just advanced to level 3

undone garnet
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

skratchnsniff._, you just advanced to level 1

#

goopi141, you just advanced to level 3

sand scaffoldBOT
#

skratchnsniff._, you just advanced to level 2

clever crystal
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

clever crystal
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

b5v, you just advanced to level 1

#

happyfoxyboy, you just advanced to level 1

sand scaffoldBOT
#

enderboy_75538, you just advanced to level 1

sand scaffoldBOT
#

wisecult, you just advanced to level 5

sand scaffoldBOT
#

krinoyk, you just advanced to level 1

sand scaffoldBOT
#

7r3_, you just advanced to level 3

#

2h34, you just advanced to level 3

sand scaffoldBOT
#

drivecoopdrive, you just advanced to level 1

sand scaffoldBOT
#

krinoyk, you just advanced to level 2

sand scaffoldBOT
#

whyistie, you just advanced to level 1

#

matgmi, you just advanced to level 1

sand scaffoldBOT
#

GG @patent galleon , you just unlocked the achievement: Give or Take! 🥳

#

swedishfish1618, you just advanced to level 3

sand scaffoldBOT
#

mineingwizard, you just advanced to level 2

#

1jemzy, you just advanced to level 1

sand scaffoldBOT
#

neolos07, you just advanced to level 1

sand scaffoldBOT
#

devil454, you just advanced to level 1

#

nadiirdw, you just advanced to level 1

sand scaffoldBOT
#

benibenben, you just advanced to level 1

sand scaffoldBOT
#

GG @celest sedge , you just unlocked the achievement: Chatter! 🥳

#

GG @mild lake , you just unlocked the achievement: Pro Typer! 🥳

sand scaffoldBOT
#

gremlin02610, you just advanced to level 3

#

GG @torn compass , you just unlocked the achievement: Fire Starter! 🥳

grim trout
#

.sb @twin sigil ?r compromised account, free to rejoin after you change your password and turn on 2fa, make sure not to click on weird links or pics

twin anvilBOT
#
Ban result:

activity Reason: compromised account, free to rejoin after you change your password and turn on 2fa, make sure not to click on weird links or pics
trustedAdmin Moderator: @grim troutwhitelistUserupvoter
ban Details:
spacerightDoubleArrow Duration: cancel
spacerightDoubleArrow Soft Ban: success
spacerightDoubleArrow Hack Ban: cancel
spacerightDoubleArrow DM-Members: success

<:success:660789936651370497> Successful bans

rightSort cristianat

<:cancel:660789591900684329> Unsuccessful bans

All users were banned!

formal stirrup
#

!w

#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

lucid socket
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

obsidian dirge
#

!help

sand scaffoldBOT
#
Luna Pixel Studios Plugins Commands
**Birthdays**

</help:1145941150495162392> birthdays

**Giveaways**

</help:1145941150495162392> giveaways

**MEE6 AI**

</help:1145941150495162392> ai

**Levels**

</help:1145941150495162392> levels

**Moderator**

</help:1145941150495162392> moderator

**Emojis**

</help:1145941150495162392> emojis

**Achievements**

</help:1145941150495162392> achievements

#

nashie_artz, you just advanced to level 8

sand scaffoldBOT
#

allat., you just advanced to level 1

sand scaffoldBOT
#

Jake | BisectHosting, you just advanced to level 2

sand scaffoldBOT
#

krxck, you just advanced to level 1

sand scaffoldBOT
#

nesticles., you just advanced to level 1

sand scaffoldBOT
#

squid_rocks, you just advanced to level 1

#

squid_rocks, you just advanced to level 2

sand scaffoldBOT
#

redsavesquare, you just advanced to level 2

#

towerdefender99, you just advanced to level 5

#

1jemzy, you just advanced to level 2

#

nenume00akap69xd, you just advanced to level 2

sand scaffoldBOT
#

GG @merry vector , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

the_tree4721, you just advanced to level 4

opaque jacinth
#

!help levels

sand scaffoldBOT
#
Levels Plugin

Give your members XP and Levels when they send messages and rank them by activity in a leaderboard

</levels:1145941150495162394>
Get a link to the leaderboard

</rank:1145941150495162395> (optional member)
Get your rank or another member's rank

opaque jacinth
#

/rank

#

!rank

sand scaffoldBOT
clever crystal
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

enderboy_75538, you just advanced to level 2

#

n7garrus, you just advanced to level 3

sand scaffoldBOT
#

GG @dim fern , you just unlocked the achievement: Casual Typer! 🥳

#

sezuel, you just advanced to level 2

#

dedaf, you just advanced to level 5

sand scaffoldBOT
#

nesticles., you just advanced to level 2

#

gege42o, you just advanced to level 1

sand scaffoldBOT
#

a.m.i.g.o.t, you just advanced to level 1

#

agentjtl, you just advanced to level 1

#

vitalesparda, you just advanced to level 1

sand scaffoldBOT
#

panda_it, you just advanced to level 6

#

sloth2154, you just advanced to level 1

#

nycto_ox, you just advanced to level 1

true girder
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

GG @vernal folio , you just unlocked the achievement: Casual Typer! 🥳

last sail
#

!alternates

frank tuskBOT
#

If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.

To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM

To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.

sand scaffoldBOT
#

snurpclout, you just advanced to level 1

sand scaffoldBOT
#

fannyrash_x, you just advanced to level 1

sand scaffoldBOT
#

unhvly, you just advanced to level 1

sand scaffoldBOT
#

redaskg, you just advanced to level 6

sand scaffoldBOT
#

darth_pokemon, you just advanced to level 5

sand scaffoldBOT
#

GG @proud ibex , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

xreaper6462, you just advanced to level 1

#

martinkrav, you just advanced to level 2

sand scaffoldBOT
#

booble2809, you just advanced to level 1

sand scaffoldBOT
#

martinkrav, you just advanced to level 3

sand scaffoldBOT
#

booble2809, you just advanced to level 2

lost moss
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

lost moss
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

_troox, you just advanced to level 1

sand scaffoldBOT
#

GG @vast spear , you just unlocked the achievement: Chatter! 🥳

#

_troox, you just advanced to level 2

sand scaffoldBOT
#

auggiearts, you just advanced to level 1

sand scaffoldBOT
#

wolfie1792, you just advanced to level 1

#

ehovt, you just advanced to level 1

sand scaffoldBOT
#

hunghaihao, you just advanced to level 1

sand scaffoldBOT
#

ofirfeinblit, you just advanced to level 1

#

ngiokai, you just advanced to level 1

wary flower
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

tepid cape
#

!drivers

frank tuskBOT
#

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!

1. Identify your graphics card
if you already know skip to the next step

  • Open task manager
  • Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
  • Press the GPU 0 graph and read your GPU from the top right

Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.

2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA

AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us

Note:

  • For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
  • For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
  • For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.

3. Run the installation, restart your computer, and try playing MC again

  • At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
sand scaffoldBOT
#

asphenix., you just advanced to level 4

#

GG @white kayak , you just unlocked the achievement: Casual Typer! 🥳

#

rares0887, you just advanced to level 1

#

towerdefender99, you just advanced to level 6

sand scaffoldBOT
#

snugbrrrr, you just advanced to level 1

sand scaffoldBOT
#

avelrei, you just advanced to level 1

#

deltoush, you just advanced to level 1

#

chromatic_lera, you just advanced to level 1

sand scaffoldBOT
#

deltoush, you just advanced to level 2

#

r3wi, you just advanced to level 2

sand scaffoldBOT
#

coraloll, you just advanced to level 1

#

catsidewalk, you just advanced to level 1

sand scaffoldBOT
#

chromatic_lera, you just advanced to level 2

sand scaffoldBOT
#

super5ucc, you just advanced to level 2

lament kelp
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

lament kelp
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

kingsterben, you just advanced to level 1

sand scaffoldBOT
#

kazerio, you just advanced to level 4

sand scaffoldBOT
#

ajfydg_57, you just advanced to level 1

sand scaffoldBOT
#

crazyneonstorm, you just advanced to level 4

#

Bela (Chaos Elemental), you just advanced to level 84

#

mhmadhozani., you just advanced to level 1

#

qwerweqeqwqwe, you just advanced to level 1

valid aspen
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

cardboard999, you just advanced to level 1

sand scaffoldBOT
#

_dibby, you just advanced to level 1

#

aezerxm, you just advanced to level 1

sand scaffoldBOT
#

pitzameloofries, you just advanced to level 1

sand scaffoldBOT
#

imperatorofdestruction, you just advanced to level 1

sand scaffoldBOT
#

thejoselh, you just advanced to level 1

sand scaffoldBOT
#

patolino1_, you just advanced to level 1

sand scaffoldBOT
#

patolino1_, you just advanced to level 2

sand scaffoldBOT
#

athemist, you just advanced to level 1

sand scaffoldBOT
#

crazykpyro, you just advanced to level 6

#

Jake | BisectHosting, you just advanced to level 3

#

GG @distant geyser , you just unlocked the achievement: Casual Typer! 🥳

sand scaffoldBOT
#

dedaf, you just advanced to level 6

sand scaffoldBOT
#

luizprata, you just advanced to level 1

livid sphinx
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

livid sphinx
#

!server

frank tuskBOT
#

Free Method

To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.

If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.

Paid Method

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.

Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.

Go to #server-hosting for more Info!

The following advice works for both the Free and Paid methods:

Transferring Your World

If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".

Fixing Lag

To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.

sand scaffoldBOT
#

addb, you just advanced to level 1

sand scaffoldBOT
#

robin.c, you just advanced to level 1

sand scaffoldBOT
#

bigmafiacat, you just advanced to level 1

sand scaffoldBOT
#

nguyendat123456, you just advanced to level 5

safe bear
#

!help

sand scaffoldBOT
#
Luna Pixel Studios Plugins Commands
**Birthdays**

</help:1145941150495162392> birthdays

**Giveaways**

</help:1145941150495162392> giveaways

**MEE6 AI**

</help:1145941150495162392> ai

**Levels**

</help:1145941150495162392> levels

**Moderator**

</help:1145941150495162392> moderator

**Emojis**

</help:1145941150495162392> emojis

**Achievements**

</help:1145941150495162392> achievements

safe bear
#

!valk

#

!vs

#

guh

sand scaffoldBOT
#

GG @restive relic , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

brauliop, you just advanced to level 1

#

ayunamiruku, you just advanced to level 1

sand scaffoldBOT
#

GG @magic stream , you just unlocked the achievement: Give or Take! 🥳

#

ogplayer5567, you just advanced to level 1

sand scaffoldBOT
#

mau_soo, you just advanced to level 2

sand scaffoldBOT
#

justleo067, you just advanced to level 1

sand scaffoldBOT
#

yhcgcgcg_26228, you just advanced to level 1

sand scaffoldBOT
#

panda_it, you just advanced to level 7

sand scaffoldBOT
#

vales066, you just advanced to level 7

sand scaffoldBOT
#

fiffy., you just advanced to level 7

sand scaffoldBOT
#

caesar9748, you just advanced to level 1

sand scaffoldBOT
#

unhvly, you just advanced to level 2

hybrid ridge
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

ashinged, you just advanced to level 1

sand scaffoldBOT
#

alessio_raneri, you just advanced to level 1

#

ussdefiant60, you just advanced to level 2

paper schooner
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

pee.boy, you just advanced to level 1

#

towerdefender99, you just advanced to level 7

sand scaffoldBOT
#

bytheriver, you just advanced to level 1

sand scaffoldBOT
#

pee.boy, you just advanced to level 2

#

bytheriver, you just advanced to level 2

#

sezuel, you just advanced to level 3

sand scaffoldBOT
#

imaginewagons6909, you just advanced to level 1

sand scaffoldBOT
#

lavendi, you just advanced to level 1

sand scaffoldBOT
#

deltoush, you just advanced to level 3

sand scaffoldBOT
#

xplats, you just advanced to level 1

brittle timber
#

!tps

frank tuskBOT
#

Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.

The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.

For further performance improvements, you can also follow this guide.

Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.

If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.

sand scaffoldBOT
#

seeblo, you just advanced to level 1

sand scaffoldBOT
#

seeblo, you just advanced to level 2

sand scaffoldBOT
#

_troox, you just advanced to level 3

#

GG @lost moss , you just unlocked the achievement: Casual Typer! 🥳

#

thisisakaza, you just advanced to level 2

#

_troox, you just advanced to level 4

#

dorbon, you just advanced to level 6

sand scaffoldBOT
#

_troox, you just advanced to level 5

sand scaffoldBOT
#

unhvly, you just advanced to level 3

#

dorbon, you just advanced to level 7

#

_troox, you just advanced to level 6

sand scaffoldBOT
#

igw, you just advanced to level 1

#

dorbon, you just advanced to level 8

#

_troox, you just advanced to level 7

sand scaffoldBOT
#

igw, you just advanced to level 2

sand scaffoldBOT
#

ooksowhat, you just advanced to level 1

sand scaffoldBOT
#

ooksowhat, you just advanced to level 2

#

life6253, you just advanced to level 4

sand scaffoldBOT
#

drabberconch385, you just advanced to level 1

sand scaffoldBOT
#

thisisakaza, you just advanced to level 3

sand scaffoldBOT
#

bepis1266, you just advanced to level 1

sand scaffoldBOT
#

GG @thick wind , you just unlocked the achievement: Give or Take! 🥳

#

GG @thick wind , you just unlocked the achievement: Give or Take! 🥳

sand scaffoldBOT
#

interludealex, you just advanced to level 1

#

bigasiankid, you just advanced to level 1

sand scaffoldBOT
#

lavendi, you just advanced to level 2

sand scaffoldBOT
#

mind_goblln, you just advanced to level 1

#

lavendi, you just advanced to level 3

#

ijustwantfood., you just advanced to level 1

sand scaffoldBOT
#

GG @lament hound , you just unlocked the achievement: Chatter! 🥳

#

GG @karmic laurel , you just unlocked the achievement: Chatter! 🥳

sand scaffoldBOT
#

elhombre, you just advanced to level 1

#

daviza, you just advanced to level 1

sand scaffoldBOT
#

daviza, you just advanced to level 2

#

ravenblade2000, you just advanced to level 2

sand scaffoldBOT
#

vrus0188, you just advanced to level 6

spice eagle
#

!ws

frank tuskBOT
#
Luna Pixel's World Sharing

Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.

To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.

It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!

We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.

There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.

sand scaffoldBOT
#

theindogamer, you just advanced to level 1

#

greymoorbynight, you just advanced to level 4

sand scaffoldBOT
#

boostedzaddy, you just advanced to level 1

#

hazel (ping for mac), you just advanced to level 45

sand scaffoldBOT
#

munkhu, you just advanced to level 1

sand scaffoldBOT
#

justsomebeans., you just advanced to level 5

sand scaffoldBOT
#

certified_smol, you just advanced to level 2

#

anx_4z, you just advanced to level 3

sand scaffoldBOT
#

GG @candid star , you just unlocked the achievement: Casual Typer! 🥳