#better-mc-fabric
1 messages · Page 103 of 1
yeah
well my friends map reset lol
I have a question
If i add an extra mod like an estructure, a dimension or something similar, it will spawn at the world i have? Because, you know the world its already generated
it’s probably just a texture pack below doku changing the blockstates
@tropic scroll is fabric and forge the same thing
or does fabric remove specific things
please dont ping staff
That doesn’t answer another question I have
It does??
Hey, can i remove the controller mod and replace with midnight controls
“+many more” doesn’t answer my question
Dude, just choose one.
You can research por those mods that are in forge, aswell with fabric
They are diferent modloades, so they have diferent mods, but the creator or “BMC” tried to put the most similar mods posible
and no. They are not the same thing, they have tons of diferent mods.
But fabric id kinda more stable in perfomance (thats what i think)
?
How can you not?
ahhhhh
that’s why
I’m on old discord on my phone
so I can’t see that shit 💀
I’ll get on my pc later
its also on my phone.
I have old discord
I would refer to modpackindex instead of the g-portal website
I can’t see that
i just choose the firts one i saw
okay
you can go on modpackindex
I still dont get a answer for this

it will
just in newer chunks
Ohh
yep
only if that mod is available on the loader you want to add it to
atlauncher?
!define
Curseforge - Refers to both the Curseforge website and Curseforge Launcher. The Curseforge Launcher is a modded launcher used to play & install modpacks. ATLauncher is a better alternative. All modded launchers can be used to install & play both Fabric and Forge modpacks.
Modpack - A collection of mods. "Better MC 1.19.2 Forge", for example, is a modpack.
Modpack Version - The version of the modpack you are playing. v5, v6, v7, etc.
Minecraft Version - The version of Minecraft which the modpack you are playing runs on. 1.16.5, 1.18.2, 1.19.2, etc.
Mod - A .jar file which modifies the game in some way. "BetterEnd", for example, is a mod.
Forge - A mod loader which allows you to use Forge mods.
Fabric - A mod loader which allows you to use Fabric mods.
so atlauncher can do that right
ATLauncher is a modded launcher used to play & install modpacks
similar to Curseforge
Fabric & Forge is a modloader
so I can transfer a forge mod to fabric MC with atlauncher
if i want to essentially do a refresh of my server, what should I keep so that I keep player's data, and the state of the world and the entities?
well you aren’t rlly able to do it normally but you can transfer ur modpacks over. but not transfer a forge into fabric unless there is a fork
is that aternos?
wdym a forge into fabric?
you said transfer a forge mod to fabric mc
it’s usally only forge or only fabric in their respective mod loaders
there is a single mod called connector that does some translating to do forge in fabric and vise versa but is very buggy and not worth
yep. but i already somehow fixed my server issue. it w as a ticking world issue. just had to go to peaceful mode to kill some random entity fcking up my \world. thanks anyway.
it’s just aternos simply said sucks
the performance is bad and ram is bad
that’s why ur lagging so bad
cuz it’s not good
just do these
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod causes world corruption and other issues, and is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
Opinions on my base?
add roof maybe a second floor :3
Well obviously
But what should I make it out of?
material should be stone bricks :3
anything but wood, thunderstorms and other hazards exist, there is the lightning rod but wood is still risky
Oh also
I got a dog
Took it into a cave
And it burned in lava after 5 minutes
(This is why we needed the crab)
Another screenshot :3
looks nice
ty 3>
oops
❤️
Thats better
Also the second story is done
Im working on the roof nwo
Hi all, does Eden Ring mod in this modpack works for 1.20?
or just simply portal wont trigger, thus disabling this dimention?
Theyve come to save him
that mod isnt on 1.20.1
Also should I have the roof slope on 4 sides or on 2?
ITS DONE
looks great
Which mods do I remove for the server to work for Bisecthosting. the client side mods i mean. dont i have to remove those? cuz the server isnt working
How did you install the server?
The client & server uses different files
Did you do it through their automatic install?
yes
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
did you add any mods?
server files are server files
bisect also chucks them into a server mod seperator i think to filter out client side mods
I added a few extra mods but it wasnt working even before I added any extra mods.
And the extra mods work just fine with the pack. i tested them myself.

follow the moreinfo guide
and give the server logs
Please send some logs over so we can help resolve your issue. To access logs on your Minecraft server, please navigate to your server panel's File Manager and take the following path:
1. Open the Server's File Manager
2. Navigate inside the 'logs' folder
3. Click on "latest.log" to download it and send the file over Discord to this channel.
(Do not send over any logs ending in .gz or we will not be able to assist you)
If your server is in a crash state (the server stops itself), please also attach a crash report, which can be found at the following path:
1. Open your server's File Manager
2. Navigate inside the 'crash-reports' Folder
3. Select the latest crash report by date/time and send it over Discord to this channel.
These files are required for debugging so, please send them over before requesting further assistance. No assistance can be provided without the files. If you have any questions about how to find these files, please take a look here: https://www.bisecthosting.com/clients/index.php?rp=/knowledgebase/136/How-to-find-and-view-Minecraft-server-logs-and-crash-reports.html
^ i robbed from bisect
sorry Max :3
the server isnt crashing FYI
Its just not letting anyone join it
The server runs just fine. But when I enter the IP and port, nothing. No error, it just doesnt connect.
There isnt even an error message. it just fails to connect.
and its for everyone. none of my friends can connect either
How do I place the dragon egg on top of the platform to summon the eye? Whenever I right click the egg it teleports away, so I built the platform below it, broke the block it was sitting on but that didn't work
do you not know how to get the dragon egg? that's a vanilla thing
I've killed the dragon if that's what you're asking
I mean how do I place it on top of my obsidian pyramid?
no, there's a way to get the egg in your inventory like an item so that you can just place it down
you'll need a torch underneath the block that the egg is sitting on then break the block
oooh ok, ty
hello everyone ! hope i didnt miss any ressources before asking
but I just installed BetterMinecraft as zip file on my private server (in the mod files), i can see minecraft find it when i start my server but when i connect to it i see just a basic game (im also using fabric client), do you guys have an idea on how can i debug this ? sorry for bothering
maybe i have to install betterminecraft on client side
give the uh server logs :3
or well
actually take a screenshot of ur server files
linux?
ah ok xD
mind if i see the latest logs from the logs folder?
oh wait Applied 0 biome modifications to 0 of 63 new biomes in 6.869 ms thats a hint lol
that isnt rlly normal
ok
if you wanna keep the same world you can just take the world from ur current
and throw into the new one
its fine it was just for debug purpose
it seems no mode from betterminecraft have been loaded though
ok so maybe i shouldnt just have the .zip set on the mod folders, do you unzip your mods ?
thanks very much for answering me, ill look deeper into it
bettermincraft is a deep tree structure, guess it find the .jar anyway on the subfolders
ok thanks
maybe
Where can you find bee hives?
it loaded the apis from the libraries im pretty sure
Struggling to find one
they pop up on most vanilla trees. There's been a ton popping up on birch forests and cherry groves
failed to connect to server
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
Hey so I’m playing the latest v19.5. I’m on the latest model of the 15 inch MacBook Air. And I keep getting exit code 6 after generating a world and taking a few steps, thanks for any help
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
No modifications have been made - using curseforge - 1.19.2 - V19.5 - Open a new world, after about 1-5 seconds it crashes, - yes I played and it let me go on as normal. the next day I started getting exit code 6 - and I just ran throught the performance guide, same problem
Sorry wrong one, I think this one's the right .log
so it’s new every time?
yea
bruh
it keeps letting me connect to my server then not letting me connect to the server. wtf
something is wrong
either with this pack or with Bisect
reach out to bisect to see if they can help.
bisect most likely
sadly not
auto save happens well automatically
how often though? can I make it save more often?
My server just went down and rolled back like 5 minutes
can I change that?
I did - nothing there :[
darn
trying to start a mp world to play with a buddy who never has, but I cant seem to find the "ReadMe" on how to get a free one going
anyone know how to do that?
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod causes world corruption and other issues, and is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
you can use this :3
I have no idea how to get that going, lol
which bmc is this
Fabric 19.5
bmc1-2?
bmc1
wait
found it
1
:3
thank you very much
np
open to lan
gives you a adress
give friend that address
they can join
well shit
Hey sorry don't wanna be that guy but, what would be the fix here? any help would be greatly appreciated thank you
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
Hello guys, I need help plz !
I'm trying to use replaymod to make some clips but when I load the replayfile my game keep crashing and I get this message
srpatatalays has been timed out for 2m 

Reason: Similar-Messages Spam
behrens_bmx has been timed out for 2m 

Reason: Similar-Messages Spam
huh?
whatthehell1037 has been timed out for 2m 

Reason: Similar-Messages Spam
Reason: No reason.
Moderator: @sudden bay


WhatTheHell#7701 [440792417604730892]
hello, somehow every time i install a fullbright mod or texture pack it wont work. is it because of a config in the modpack or what? im using the 1.20.1 version of bmc
Please read #faq for modpack installation.
!wiki
Is there a wiki for this modpack?
no
Oh sad
Where do I find nether reed?
Yeah but nether is Big ya know...
hi guys, is there a plan to add the yung's better desert pyramid
true, so search up what mod nether reed is from and find the mods wiki :3
mikeyhenk has been timed out for 2m 

Reason: Similar-Messages Spam
that did not really help
doubt my PC would handle running one and I dont want to pay for a server I'll hardly use since its a rare thing with a friend
lan uses the same resources as a dedi server
yea
What do you do with those two copper golems in the villages?
I’m new by the way
And also are you able to add shaders to go with better Mac
which serverpack do I get. it just says "download it from the website"
Maybe use forge
there's copper golems in your villages? mine just have guards
Curse force
Ya
There is this building with two frozen copper golems
They don’t move but they are killable
an axe can shave off their oxidation
OHHH
and theyll move
pretty sure you can wax them too
Huh
waxing coppr items stops them from oxidizing
Ohhhh
Im kinda rusty and haven’t played in a while so im learning new things every day lol
only rcently updated from Version 2 to version 19.5 lmao
yeah
video settings > shaderpacks
Ok thanks
Is there a way to switch to windowed fullscreen
add a mod for it
Any way to fix this? BMC2 V18 1.20.1, opened from curseforge, freshly downloaded no changes. I can only get it to work in BMC1 V10, and it worked for like a day when I tried playing the forge version but then I started getting exit code 6. crashes the moment I generate a world or spawn in one. Am following everything in the performance recommendations. Thanks for any help!
Are there any you can suggest or do I just gotta look for one on my own
any idea why powershell is immediately closing itself when I open it
!windows11
An update to windows introduced a new security feature that prevents powershell files from running on your PC. This is great for your security, but not so great for our server start scripts, which require powershell to run them. Fortunately there is a quick fix for this!
Run powershell as administrator, then run Set-ExecutionPolicy RemoteSigned. Read the prompt and press accept. This will allow us to run scripts.
Next, navigate to your server directory using cd path/to/directory (for example: cd C:\Users\Username\Documents\Minecraft\Server)
You can now run the server by double-clicking the start.ps1 file, or typing .\start.ps1 into the command line while in the directory.
IF THE ABOVE DOES NOT WORK, TRY THIS
Run the command Unblock-File -Path .\start.ps1 in the same powershell window. This will allow the start script to not be blocked by windows, and run freely.
If all else fails, a manual installation should work:
FORGE 1.16.5: https://www.youtube.com/watch?v=bIjisWyxU-8
FORGE 1.18.2: https://www.youtube.com/watch?v=R610M102X0U
FORGE 1.19.2: https://www.youtube.com/watch?v=3HD0ibIpO-A
FABRIC: https://www.youtube.com/watch?v=b2W1Xb7nLKo
Make sure to Install the Server in our ServerPacks so it can use the correct files.
okay clearly I'm just incompetent or something. I cant figure none of this out
which part are you struggling with?
its okay
hold that thought. trying something
just read through the guide and follow it to the Tea
my computer is force closing everything I'm using to try and set this up. It's auto closing powershell and the batch file from the Fabric video and to try and follow the guide to stop it from auto closing comes back with an error and dont work
Follow the guide it should stop it from closing
Hey is there any way to fix this? BMC2 V18 1.20.1, opened from curseforge, freshly downloaded no changes. I can only get it to work in BMC1 V10, and it worked for like a day when I tried playing the forge version but then I started getting exit code 6. crashes the moment I generate a world or spawn in one. I am following everything in the performance recommendations. Thanks for any help!
weird just dies on loading configs
rerun the world till it crashs
its supposed to be cd C:\Users\Kampe|OneDrive\Desktop\BMC1_Fabric_1.19.2_Server_Pack+19.5\start.ps1
oh whoops
i put a |
remove the | and put a \
on the left of onedrive
thats a command for somthing
mbbb
I was able to grab a crash report about it, it's directly from the crash popup in the launcher. Not sure if that changes it.
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
I have a macbook with a M2 processor would that cause issues? or would I still be able to use one of the drivers
update ur mac to the latest version
that should fix it
mac isnt rlly a gaming machine
has a ton of issues with games
Yeah might just have to bite the bullet and accept I'll have to get a dedicated gaming setup in the future instead of using my college laptop lol, it's currently the most recent Sonoma 14.1
then I'm waiting to try again till you're more available
yeahhh would be better for that
mac and modded mc don’t go together at all ngl
anyone here able to help out with an error while trying to host a server from gportal?
show the error
I get ths error while connecting to the server :
internal exception io.netty.handler.codec.decoderexception java.lang.indexoutofboundsexception: readerIndex (12) + length (1) exceeds writeIndex(12): PooledUnsafeDirectByteBuf (ridx: 12 widx; 12, cap; 12/13)
!logs
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
ok i am avalible now
Drivers are all updated, error still remains the same
laptop or desktop
desktop
here is the new log after updating drivers:
Good evening all, just updated my Better MC personal server from version 15 to version 18 and copied the config and mods folder however when i am in the server all of my personal waystones arent showing on the map anymore. all the village waystones i discovered are showing just not the ones i placed, i tried replacing them but still no luck. anyone else having this issue?
all my personal waypoints and my end portal stronghold disappeared when I updated, but my waystones still work
@sudden bay my bad but do you know a fix to this.? ive seen it just dont know what it can be, probably removing waystone mod? 
in vc
client server version mismatch
ah okok
so my server and client are not same version?
yeah
I'm sorry for this probably stupid question, but these are versions offered by gportal.
I am also using curseforge to load the mod and the version there is 1.19.2 v19.5 and Fabric - 0.14.21. Would these versions match or?
whatever the modpack fabric version is and mc version is
you woudl want
This wasn’t here last time I played and it hasn’t updated since ?
What could be causing this and how could I maybe fix it ? The specific block is jacaranda cabinet
I did also take notice yesterday when playing the fisherman villager I think ? Texture was also error
a uh are you in a server?
To reload textures and sounds, press F3 + T. If this doesn't bring up a loading screen, do the following:
1. Press escape and go to the Resourcepacks tab.
2. Move a Resourcepack on the left of the screen to the right.
3. Move that SAME Resourcepack back to the left.
4. Exit the menu.
If step 4 does not bring up a loading screen, do step 2, then step 4, then step 3, and then step 4 again.
try this
I was trying turning each resource pack off to see if maybe one was causing it hmm
If I mess up the order could that break anything ?? Idk
It’s still error
yeah kinda
tbh try reinstalling the modpack
or just
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
better launcher at the same time :3
read the instructions did you 
U didnt see my last messages of me being an idiot did u 
:3
lul
I’m being bullied
How dare u bully me :(
Ok got it ! Now to launch and see how it does :>
YIPEEEEE thank u !
My kitchen is normal again
1.19.2 bmc1, does it have optimization / fps boost mods in it already?
yep
you can follow #faq performance guide as well
Oh I think I did start some issues with the puzzle menu
I see it in there
I still have my old instance from before the update so it really wouldn't chap me too much to just start over and not touch the puzzle menu
are you running vr?
Nope
(please say nah)

pardon? can you screenshot wym
what key is it
should be Tab on default
k thanks
Failed to synchronize Recipe data with server. REI wont work.
nobody can view recipes
whats the best way to find the twilight forest
make the portal
its a PORTAL?
yeah
hey ho how can i get this? this is BMC1 there is nothing about it in JEI
here I've been exploring the overworld like a dumbass
are you on bmc1 or bmc2
1
yeah
portal
and 2 dosent have Twilight
read the questbook
it should explain there
it ggrows in one of the biomes. forget where
thanks
is this biome rare or smt?
this is a big issue
I dont know off hand, just know I did find some while exploring. bout all I can help with. go to Paradise and explore
thanks!
And sorry for bothering you but last question
whats up
what is easiest way to explore paradise without elytra?
Charged Ender Pearl
ye
threw one together and decorated
I'm very, very sorry, but I have one last, really last question
to charged pearl i need to beat this plantera minecraft edition
void blossom or smt like that
void blossom
what i need to beat it?
when you get close to one a health bar shows up
decent parkour (personally) then at least diamond armor and plenty of food
it does poison so maybe milk bottles
a ranged weapon wouldnt be bad either. It spawns regen totems that start to be armored with vines so bring an axe too
dont need to be sorry
exploration, diamond gear, crafting waystones, making librarians for best enchants, other dimensions (read quests and do them), unlocking the end, getting dragonscale (or crystallite if that's in this), beat the modpack
mob farms, making it all pretty, landscaping, building structures, etc
chest in the middle of the maze
all the twilight forest bosses will have a chest appear after you defeat them
good to know
Failed to synchronize Recipe data with server. REI wont work.
nobody can view recipes
are structures really rare in this modpack? whenever I use /locate, structures tend to be always around a thousand blocks apart.
although, my starting location does have quite a bit of stuff going on
Theyre usually fairly spaced out but sometimes you can find several within a very short distance of each other
mostly luck based
found like 4 Iceologer castles right after the other, one of which was half inside a pillage windmill
then there are times you dont find nothing for 3000 blocks
also
wtf is Red Thread for
Check in jei
Hiddentides
I have a problem
Failed to synchronize Recipe data with server. REI wont work.
nobody can view recipes
Am I doing Twilight Forest wrong?
Killed Naga, Lich, The Minoshroom and a Hydra but cant seem to get the Dark Forest to work
read #faq for modpack installation
I Did. It installed just fine before and the recipes let me view them. but i since added a few extra mods, and it still worked. but the world got corrupted and I had to reset the world on the server (due to a corrupted chunk, not a mod)
and now on the new world i get the REI failed to synchronize with server
try reinstalling the pack then since it corrupted your last world, it could have affected the files in some way
i did that
its not just me. i run it on a bisect server. other people on the server have the same REI recipe data issue.
recipes work fine in singleplayer though
may have to reset the server as a whole
thats gonna suck. i have some builds i spent like 20+ hours on on the server
can i send you my logs or something before i resort to doing that? maybe you can dissern what the issue is
?
!moreinfo I can't really read logs so I'll leave that to the pros
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
at this point, the server reset may be unavoidable if you're having a hard time with it. it stinks losing 20+ hours of work, but at least it's not 200+ like some have experienced
io.netty.handler.codec.EncoderExceptionjava.lang.IllegalArgumentException: unable to fit 2382826 into 3
sigh another update
Yes
added mods
Curseforge
1.20.1
v18
its not a crash, i just cant join my server.
again not a crash
not a crash
yes
reach out to the provider for your server.
they said its an issue on your guys end
no not rlly our modpack works fine with servers
what mods did you add?
update to latest
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
unzip the serverpack
then
run the powershell file
should be called start.ps1 or start
make sure its the powershell file though
can u dm me?
i wanna send a pic
read the command please
on Curseforge
Im just going to end up telling you the same thing as the command
im braindead sry
how to find mammoth easily
help?
!reload
To reload textures and sounds, press F3 + T. If this doesn't bring up a loading screen, do the following:
1. Press escape and go to the Resourcepacks tab.
2. Move a Resourcepack on the left of the screen to the right.
3. Move that SAME Resourcepack back to the left.
4. Exit the menu.
If step 4 does not bring up a loading screen, do step 2, then step 4, then step 3, and then step 4 again.
IT won't work
Yes
how much ram recommended for server?
how many players
8 max on at once
8gb should be ok
cool ty
how can i get there without elytra........
cheats
or water bucket :p
good luck with that
What material are those tools? Like the sword and that
cryomarble
its like diamond i
i mean durability
in caves its not that rare
no there not
Ty so, thats really helpful
its lil glowing crystal
Yea yea
np
from 4 crystal chard you can get 1 cryomarble you can craft it in crafting
and you have to combine this with toold
but only tools
you cant make cryomarble armor
to combine it you need smithing table
okay, that really reduces diamond uses in tools, because i breakem too fast
np
but combine with just iron soo
Behold, my army of dogs!
puppy
does anyone know if there's a way to stop mud from turning into cracked mud? the minecart in our sugarcane farm keeps getting stuck and i want to build one that doesn't use a minecart, but we're in a plains biome and idk how to stop the mud from cracking
alternatively, anyone know if removing immersive weathering from our server will fuck it up? i dont see any plus sides to the mod, its annoying as hell
what mods do i have to remove to replace REI with JEI
why
I havent tried yet but im planning on looking at it tomorrow but is it hard to update a modpack on a server
im so stressed
guys whats the best way to get more diamonds
loot structures
in the overworld?
yeah, that's one place
i tried uploading my configs to the server configs because i was told that maybe its a server client mismatch or something and now i am getting the REI error in my chat once again
yall know if there are jump boots? i swore i saw something like that yet when searching the item list, i cant find it
can somebody help me
@pearl flume im still having the issue.
and i tried with bisect. for the entire day
i did. And the guys at the ticket have broken my server 3 times trying to help fix it. every passing day i feel like im wasting money because like.... this is a server breaking issue, and i am paying for a broken server that isnt being fixed, and thus nobody wants to play on it, and thus its essentially as valuable as a rock to me rn. except a rock that i am throwing $80.00 a month at. I have been very patient but this issue has persisted for days and I have sent over 100 messages to tickets back and forth by now.
The problem is that REI/JEI/NEI/ Whatever, doesnt work on the server. and as its a modded server, people NEED THIS to see the recipes. otherwise you quite literally.... dont know what to do and cant progress.
It works fine on singleplayer though.
It keeps giving me an error message on the server "REI: Failed to Synchronize Recipe Data with server" or something like that.
I have tried every fix people have recommended to me. from mods that increase the packet size, to reinstalling the entire pack (THREE SEPERATE TIMES), to changing from REI to JEI, to EMI, to using the default recipe book, to messing with config files, and syncing the config files with the server and client making sure they match,
I have tried uninstalling mods and installing mods, I have tried so so much......
Furthermore, I have had other issues with my server and my server had to have its location moved 3 seperate times due to problems with the machines the server was hosted on.... multiple times..... which is really annoying.........
it went from new york, to another server in new york, to new jersey. And then it acted up a bunch on new jersey, the world got corrupted a few times, and I had to reinstall the pack over 5 times myself to fix some stuff, and then again with the REI/JEI/EMI/NEI issue the helpers at the ticket reinstalled the pack another 3 times, further breaking and corrupting the server world, thus leading to me having to fix it by using a backup, which lost progress on the server. Because i only get a limited amount of backups and i am scared that if i wait to long it will overwrite the world and I will lose so much progress and my friends will be mad at me
And yet after all of this, the issue still persists.
REI wasnt acting up days ago but it only begun acting up recently after the server was moved to New Jersey and i do not know why.
Our modpacks don't support essential, please use e4mc instead or host a local server using the serverpack.
I.... literally am not using essential -.-
it's a bot response. did you completely restart the server like I suggested?
scrap and start over
Again as I mentioned, it seems like the only step left.
yes and it didnt fix it
shouldnt you ask the mod Dev for help?
Does anyone know which mod in bettermc 1.20.1 makes all trap doors open at once
when you click just one
its really annoying and im wanting to disable it
Is there any solution for getting BMC 2 to run on Linux since CurseForge isnt on it?
double doors is the name i think
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
i think there is a conflict between "Meadow" and "Oh The Biomes You'll Go".
Meadow adds the "Watering Can" which needs Pine Planks (made from pine log). However, Oh the Biomes You'll Go seems to replace all Pines with a own version which can't be used for the Watering Can.
e.g. this is the one you would need
but this is the only available:
are you sure its replaced
They should both be spawned
i have a family member here playing a world with weeks into and she can only find the byg pines
if there are meadow pines, they are extremely extremely rare
thanks
However, what I've just realized is that she started this world in an older version, maybe meadows wasn't in it yet. i'd have to check that out. but even then, if she walks far enough in new created biomes she should in theory find all newer stuff, right?
It does
I would suggest going into singleplayer and running /locate
to see if it spawns
Hey. Can some1 help me with the server? I try to use teleport to waypoint it says "unknown or incomplete command". Also, can no longer change the time ingame (day,night, noon). Any1 know what i have to change or enable ?
you are not op on the server
But im the owner though ?
You still need op
And what i need to do for that ?
or do it from the console
just write "op [minecraft name]" in the console
/op (username) in the console
in powershell you dont need the / 🤔
¯_(ツ)_/¯
you mean the ingame console , as command ?
hm, can't do locate on her game (unknown command)?. however, i used natures compass, and on my game it shows the meadow biomes, on hers it does not.
i guess the version she started on was just too old and there are some problems now
how are you hosting your server
Through bisect
maybe the server was not installed properly?
Updating versions shouldnt be an issue
!updateserver
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
this "open in LAN"
I dont suggest using that
sorry i don't know all the names yet, i'm not the gamer here, she is 😄 but i look
LAN dosent really work well with modded
ah i see
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
allright will do
Cheers for help. Working nice now 🙂
Are there any resource packs or shaders for Better MC ?
i use LBPR, some blocks are quite scuffed
!shaders
!shader
ty 🙂
Hey guys, I've never done this before and I don't know if I do this properly, I've got a server on hostinger, I just want to install Better Minecraft on hostinger. I've got some questions and I can't find these answers. When I download the server pack i've got a zip, If I unzip it and put the folders in the minecraft folder for replacing, it doesn't work. If I let it in the mod folder in zip, it doesn't work. Can somebody help me? How must I do?
so you have a hoster, you want to upload the files manually to server, you unzip server pack, and “replace foloders in the minecraft folder is replacing”?????
try to explain a bit more better please
Basically, I just want to install better MC on my host but I''m struggling. I've put the server pack zip in the mods folder and I don't know if I must unzip it for working
Sorry for my bad grammar
ur not supposed to put server pack in the mods folder
the server pack is Everything
not just mods :3
what server host do you have?
Hostinger
honestly never heard of em
Ho
I've got acces to the folders and stuff but I don't know what I'm supposed to do. I've already install better MC on my computer but for the server I struggle
is there anyway to quick install the modpack onto ur server?
ik most server hosts have buttonsto install
I can choose to a vanilla server for a fabric, forge server but I don't think I can quick install it
ok
you need to manually install fabric onto server
than
transfer the mods/libraries/configs/defaultconfigs
to server
not into a folder
but into the server
and launch and it should work
ok I try this, tell you if it works
ok sure
and I must keep a vanilla server or must I but it in fabric?
thanks!
np
are there any better mc servers
when I do this the server is unable to restart, I think I will just give up, that's life
show the console
you installed the wrong version of mineraft
you installed 1.20.3 ALphta
Every time I different error message
one secondo
rq just reinstall the server with the knowledge you have now
a clean reinstlll will be good
Yep that's the fifth reinstall I do :/
oh rlly?
hmm
can you give the logs than?
inside of ur server files there should be a folder named log
give the latest.log when the server fails to launch
wait are you playing bmc fabric 1 or 2?
1
ok another second than
can you for me ping Nintai?
im unable to ping users for a weird reason
@clever palm
can you check what fabric loader bmc1 fabric is supposed to be? im not entirely sure Dip is using the right one
i mean
i couldve just asked you dip to check via ur client
hm
You mean this? i'm not sure to understand
I KNEW IT
ur using the wrong fabric on ur server
server has 1.14.24 which is for the bmc2
Hooo i check this
0.14.21*
i will do a clean reinstall, let you know
nice nice
tru
server restart, i check if it workd
did it work?
Thank you so much!!
don't know why but the server keep restarting
i've increase the ram
give the log again
seems to be good since i've increase the ram
ha nope
didn't have access to my console anymore, keep you aware
yep it was the ram, 3go isn't enough
i've put 5go, hope it's ok
4 is required just to run the game
What is the Dungeon that looks like an Enormous Chinese Building called.
Trying to find another one to get some more Protection X books
Infested Temple, that's not prot x though
You typically don't get prot x from that one
I got 2 from that one, lol
which one is supposed to give Prot X?
Coliseum
it’s all hidden in structure NBT so maybe one of the infested temple mobs have prot X and no one noticed
those top floor ones usually don’t spawn at all due to light level, might be those
how can i use that enchantment on my pickaxe ?
appply with an anvil
so. Pickaxe + book = enchanted pickaxe
What anvil are you using
also
Idk if it can be put on Iron
Might have to be Diamond+
ruby's fire is typically a Nether Ruby level enchant which is on par with Diamond
might just need a better pick
but it also robs you of the exp earned for smelting certain ores
ended up leaving it off of my Dragon Pick
thanks i will try it again when i had a diamond pickaxe
Does anyone else have the problem that when you're hitting mobs, the server lags for a few seconds and then its just working again for like 3 minutes?
server or singleplayer
server :)
where server from?
not bisecthosting, or do you mean the region?
like website
- how much ram and players
its a custom server, 10 gb ram and only 2 players currently
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/brucethemoose/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, do the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
why dont the quests show when hosting a server? i have made a team and everything

wym that
oh
running bmc and replay mod
one second
you should be able to run it
i dont see why not for fabric
does anyone know how to fix?
they should show
if they dont the modpack isnt installed correctly
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
but it doesnt crash
do i dm it to u?
nah send here
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
better end slab block, just missing texture..
how do we see what should go into all the armor slots? i know some of it is cosmetic, one of it is armor, but is tehre are a guide to the others?
!reload
To reload textures and sounds, press F3 + T. If this doesn't bring up a loading screen, do the following:
1. Press escape and go to the Resourcepacks tab.
2. Move a Resourcepack on the left of the screen to the right.
3. Move that SAME Resourcepack back to the left.
4. Exit the menu.
If step 4 does not bring up a loading screen, do step 2, then step 4, then step 3, and then step 4 again.
Which mod removes the recipe book? I am going to try renabling the recipe book
autoslabs/betterX incompatibility fyi
only vertical slabs
not enough recipe book
there’s also possibly something with recipe essentials, not sure
HOLY FUCKING SHIT YES I FIXED IT
Movin up in the world (Or down ig)
moving cross-dimensionally
need the glowstone yup
indeed
What sucks is I dont have diamond armor
And diamonds are too hard to find
AND I dont feel like strip mining
check structures as well for diamonds, they are pretty common in chests
hey real quick can someone tell me what this slot is i'm losing my mind trying to understand it lol
a belt
ahh okay
idk, but please don't ping staff, someone who knows will answer when they can
oh wait thats vanilla
piglin safety
probably an everycomp bug then
see if there's an update
world generation very wonky, any fix?
tried different generation modes and they all result in freezes or crashes
is deeper and darker dimension supposed to just be bedrock?
#faq performance guide
does anyone knows how to create a better mc server?
open lan --> share world --> and minecraft gives to you an ip
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
is that a yes?
no
You made a post 20 minutes ago
yeah so
Any structures in specific?
Any of them
How do I deal with this bear
Help! i just downloaded better mc fabric edition for 1.20.1 and it wont let me get out of my boat, is there like a keybind change or something? lol
ty for leaving a message and leaving without getting a solution 🙂
Well, you didnt answer for at least 1 minute, thats too long
fr
Hello guys, mind if I ask some questions about running a server here?
explain more
So basically I am trying to run a server on my own pc and I am using the powershell script, i've got the right version of java and all and it keeps returning this error
I am sorry but I am quite new to the whole entire java world, am I suposted to set JAVA_ARGS="-Xmx8G" in the variables.txt file?
mmm
screenshot ur variables place rq
oh yeye change the javaargs stuff there
Yep, servers files and only that
Downloaded the 1.19.2 server zip from the Curse Forge servers
i just use this
but this is cuz i run server from atlauncher
;3
check it out
but it should work either way
ngl
Lemme try it out, thanks a lot
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.

Uhh, it is now not recognizing java 17
This is from the AT launcher
I at least belive this is caused by the wrong version of java, had the same error before and I installed the requiered java version
!openjdk
- Download an adoptium release for Java (recommended but not required):
- Java 11 (https://adoptium.net/temurin/releases/?version=11) for versions 1.16.5 and below (can also use 8 if its not working)
- Java 18 (https://adoptium.net/temurin/releases/?version=18) for any versions newer (or 17 if 18 doesn't work)
- Consider installing the JRE instead of the JDK for a smaller file size
-
When installing through adoptium, make sure that Add to PATH and Set JAVA_HOME variable are both set to be installed (please see https://imgur.com/a/jPu1h7h for how that would look)
-
Check if java has been correctly installed by running java --version (or java -version on older versions), and seeing if the output is correct (see https://imgur.com/a/OWcoq4p for an example of the output)
- NOTE: 64 bit versions of java ALWAYS have '64-bit Server VM' in the version output. If that is not there, you have installed a 32-BIT version!! If you're getting Out of Memory errors or any other errors, PLEASE install 64-bit
- If the output isn't as intended, you have 2 options.
i) Delete ALL other java versions from your PC (ONLY recommended if you don't need them)
ii) Redirect your launcher/server to use your new installation of Java
Method i
- Uninstall any other java program listed in your programs list (differs by OS, please find a guide for your own OS if you don't know)
- Attempt to re-use the command mentioned above (if the output is now correct, which it should be, you are ready to go)
Method ii
- For a server, please modify the $Java/JAVA variable (found in your startup script depending on ps1/sh) to the path of your java installation. For windows, this path is usually found in "Program Files/Eclipse Adoptium/version_of_java/bin"
- For a client, depending on whether you use CurseForge, GD, or AT, the process is slightly different. Please see a guide for each respective launcher on how to change the java version.
I have tried the output it is currently as intended:
openjdk 17.0.9 2023-10-17
OpenJDK Runtime Environment Temurin-17.0.9+9 (build 17.0.9+9)
OpenJDK Client VM Temurin-17.0.9+9 (build 17.0.9+9, mixed mode, emulated-client)





