#better-mc-forge
1 messages · Page 202 of 1
Fair enough
nope dont have permission stuff on this panel
Java should throw an IO exception* if it was a perm issue
plus it has saved stuff before but like when we loaded minimal in game chunks
so its not like it never saves
What version Java you using for server?
this panel doesnt give the option for 18
unfortunately
i can ask the owner to add it if you can add it manually
That’s fine.
Is the skyroot crafting not available? Do we need it since we cannot craft it
Is there a problem if I add or remove mods?
I would like to add some and I have that doubt.
Depends on what ones you’re adding or taking away.
@obtuse sequoia what command do i use in game to limit the amount of backups
It's the simple backups file in the config folder
Should generate on the first boot with the mod
Probably need a reboot to pickup the changes
yeahh
BetterMCv26\config\simplebackups-common.toml
whats the difference between a full backup and normal backup btw
Anyone know why force chunckloder won't load chunks?
full means entire pack gets copied. normal is just world
ok good
#- FULL_BACKUPS - always creates full backups
#- MODIFIED_SINCE_LAST - only saves the files which changed since last (partial) backup
#- MODIFIED_SINCE_FULL - saves all files which changed after the last full backup
#Allowed Values: FULL_BACKUPS, MODIFIED_SINCE_LAST, MODIFIED_SINCE_FULL
Full is the entire world file, the other are partial saves to save space. I'd leave it on full backups unless your world gets really big
hmm pretty sure it was the pack copies. fair enough
I think there are two 'simple backups' one forge one fabric? I think the fabric forge* one is a bit more basic?
are there like
glass pane slabs
pretty sure no
i think i set it up
should i replace the stone with wood slabs
i like the stone slabs ngl
hello! i was wondering why none of my resource packs load in on bmc2 ;w;
what launcher?
Beat me to it this time
active times
curseforge
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
its like its off to the side its only that world i made a other world and it didnt do that
what?
Neat does not add block descriptions
Jade adds block descriptions
Jade doesn't show mob health
i dont know what this message means
read how the smarter farmers mod works
epic fight is buggy and causes a ton of crashes
dont update mods
what im trying to say is that my screen is not centered including my inventory and settings
How can i import maps from normal java to better mc?
Hello, I'm playing on the latest v26 and I am noticing there doesn't seem to be any natural spawning of waystones. Has anyone else experienced this? The waystones-common.toml in the 'configs' folder seems to have world generation set to 25 (disabled is 0). I am not seeing them in villages or anything, I don't think its a luck thing.
Anyone know why they don't seem to be generating?
does vanilla villager breeder not work in this pack? villager farmers don't seem to be harvesting food crops so they have no food to breed
Does anyone know why my skin is changed to Makenna the default skin? no matter what i do
what launcher?
curse forge
try restarting a few times
i did bro 😭
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Yo, whenever I try to load into a single player world, the game crashes. It's the same for trying to create a new world
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
:p
we do a little exploring
gah damn
What does this do?
nice i just died with all my stuff. any way to extend corpse before it despawns
if you died far its in unloaded chunks -> timer wont go down
how long is the timer
its either 7 mins or 10 mins in loaded chunks (I think)\
What does this do?
BMC4 corpse won't despawn until you take everything off it
this?
these are so rare it's crazy
found like 8 platinum dungeons before finding this gold dungeon
not me traveling 6k blocks to find this only to realize there was one closer 💀
Rip
Uh i was wondering where I get Moa eggs at
What mod is it from?
That's the pack, what mod does it say it is?
how do i get to the blue skies demension?
You have to find a villager guy in a house somewhere is all I know
You could look it up
where do i find chariote?
That I don't know other than in the blue skies dimension
I found it in loot chests
I'm having trouble with joining my buddy through the lan thing, is there a possibility I can get assistance?
I copy pasted both the port and server thing but it's still not working. He also copy pasted it into a chat
I don't know what I'm doing wrong
It says this when I use the number port
"failed to connect to the server"
"Network is unreachable: no further information"
!wsfull
World Sharing servers are currently at capacity
If you're receiving the error "Connection refused: no further information" when trying to join a friend through "Start Co-op" or "Host World", it's likely that Luna's servers (used for world sharing) are currently full. We don't have a way to notify you when slots on our servers free up, but you are welcome to try again later.
We understand and recognise that this may be inconvenient, so we recommend in this case to host or rent your own server. For more information on hosting options, type !server.
It just says unknown server, check address and try again
It doesn't say that it refused
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
Hey guys, I was wondering if anyone would be able to help me out with an issue I keep having when ever I'm joining a friends server. Every time I type in the address I get a loading screen full of text and the game ends up never loading in. Sorry for the late question and I appreciate any responses!
@rocky cypress is it the same thing as this problem I had?
Also does anyone know of any reason why the link cables won't connect to double chests in BMC4?
the links only work for single chests, you'll have to double up on them
I saw in a video someone doing it with double chests though
How old is the video and what version of bmc you using?
no this is just how it is with the mod, likely that person configured it
also powershell is a program that comes on computers naturally. use the start.sh is fine. if you're on win 11:
!powershell
An update to windows introduced a new security feature that prevents powershell files from running on your PC. This is great for your security, but not so great for our server start scripts, which require powershell to run them. Fortunately there is a quick fix for this!
Run powershell as administrator, then run Set-ExecutionPolicy RemoteSigned. Read the prompt and press accept. This will allow us to run scripts.
Next, navigate to your server directory using cd path/to/directory (for example: cd C:\Users\Username\Documents\Minecraft\Server)
You can now run the server by double-clicking the start.ps1 file, or typing .\start.ps1 into the command line while in the directory.
IF THE ABOVE DOES NOT WORK, TRY THIS
Run the command Unblock-File -Path .\start.ps1 in the same powershell window. This will allow the start script to not be blocked by windows, and run freely.
If all else fails, a manual installation should work:
FORGE 1.16.5: https://www.youtube.com/watch?v=bIjisWyxU-8
FORGE 1.18.2: https://www.youtube.com/watch?v=R610M102X0U
FORGE 1.19.2: https://www.youtube.com/watch?v=3HD0ibIpO-A
FABRIC: https://www.youtube.com/watch?v=b2W1Xb7nLKo
Make sure to Install the Server in our ServerPacks so it can use the correct files.
^ only have to do this if powershell doesn't show to start it with or it closes immediately
Is it gonna hurt if we keep using essential? I couldn't figure it out earlier so we just re added it
yes. it causes corruption
And we will not give support if you use it, if you're doing the self host you do not need that mod.
don't need it period, but it's useless if you're self hosting to have that added in.
My buddy is hosting it, I just didn't know about this stuff and I saw in the server pack on Windows is supposed to have a start.ps1 file but the one it gave me was start.sh
Only 1 person needs to host if you're joining his
Yeah, I was just trying to get it to work
I have to explain everything to him when it comes to this stuff unfortunately so I was tryna learn it
I went to the website and downloaded "BMC4_FORGE_1.20.1_Server_pack_v26"
And I'm playing it on 1.20.1
link cables work with double chests, but they're super temperamental. You need to place the first chest down. then the second chest, then the link cable on the first chest, other wise it doesn't register. Excuse the shit paint drawing.
So place the link cables after the chest?
I believe the order of C1/C2 matters more, but yes you can double chest
I'm honestly gonna be happy when I see the items in the chest in the inventory
Do a couple of tests with my example diagram, but it should show up in your remote/node
How I have it is I have network cables connected to one of the blocks. I've been switching around the root and inventories because I was tryna get it to work, and I have network cables going straight down and I'm stacking chests up to it
Is there a distance limit?
I got it to work with a small one
And it's about 64 ish blocks down
On the one I'm tryna make
You can mark the chunks as claimed then force loaded by right clicking in your 'm' map menu. The force loaded chunks will always render when you're online (and therefore you can access your inventory)
All of them are in one chunk
just copy over your saves folder
I force loaded it and it didn't work
read how the smarter farmers mod works
@obtuse sequoia any other suggestions? In genuinely lost and think it's a distance thing. It's all in one chunk, it's force loaded.
Nothing past the force load and the chest order
I don't understand why it isn't working 😭
Ok
So
There's a limit of 64 blocks
I'm just a lil past that
If it stops at a distance I don't think you're force loading your storage chunks?
I've been excavating this entire twilight galcier and still no ice queen :///
Hi all, I am a bit of a newcomer to BMC4, were running a server with V24, and I am struggling claiming chunks , in the quests it says press "O" but that doesn't do anything for us? Any ideas? , PS can you also chunk load a area like this,if I am offline with a server?
open map, right click chunk, claim, To forceload do steps 2 and 3 again
Go to the top, and scale the towers
Bully some penguins along the way
To whomever added better end (from one of my players):
long as the server is online, may need at least 1 person online maybeit should
Perfect thank you so much for helping 🙂
I think claimed chunks will only load if the claimer is online on the server
nvm, you can configure it to load offline through the open pac claim config
[playerConfig.claims.forceload]
#When enabled, the chunks you have marked for forceloading are forceloaded.
#If the forceload limit has changed and you have more chunks marked than the new limit, then some of the chunks won't be forceloaded. Unmark any chunks until you are within the limit to ensure that all marked chunks are forceloaded.
enabled = true
#When enabled, the chunks you have marked for forceloading stay loaded even when you are offline (can significantly affect server performance!).
#If your forceload limit is affected by your FTB Ranks rank/permissions, then you need to login at least once after a server (re)launch for it to take effect while you are offline.
offlineForceload = false
update to v26
Is there a way to put enchantments from gear to a book?
I had a look at the changelogs there doesn't seem to be anything major , I am just scared cause we're running our own custom mods (easy villigars, botont pots, iron chests etc...) it will have a conflict with what ever was updated 😦 Is there anything major that was added to 26?
you're more likely to have conflicts by staying on an old version
So to update I just copy over the new files, or is there a specific update procedure for servers?
Does anyone know how to turn off waystone sync? So a waypoints aren't created for each waystone each time i rejoin a server?
ah i don't know how i missed it, thanks
!updateserver
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
how do i get to the twilight forest?
Thanks everyone for the help!
during winter, snow that lands on trees sometimes pass through leaves and cause a lot of lag
i feel like this has probably been asked a lot but what do i do about this
how to find it guys
how do i load a backup? i tried updating better mc to latest but cancelled mid way and the download stopped leaving me with 25 mods
I don't know how to do that
just make a copy of your saves folder and then reinstall
go into the modpack files
find the saves folder
wheres the saves folder?
backup folder?
the modpack files
ok
Thank you very much! Now I can finally play on my Java map again
Hello, I downloaded BMC4 to play with a friend, but I ran into a problem. Every enchanted book has a missing textures
why veridium axe is disapeareing from my inv when i infuse it with ambrosium shard?
Is the Crawl mod still not present or am I just stupid. I was trying to follow the tutorial. Thanks
is there a way to disable Aether parachutes from auto-deploying? it's killed me more times than helped lol
What adds mob health because when I tried to play on my laptop, I could see mob health but not on my pc
You need to craft the eye of mech to find it
2x2 block body of water, flowers around it, and throw a diamond in
Finished all the blue skies boss fights yesterday now I never have to go into those dimensions again 🔥🔥🔥🔥
my game keeps crashing when i try to use the mason's workbench, it doesnt crash until i acc put blocks in it
Got a question regarding the Ethereal arc, when equiped in the arc slot and a player dies, the arc is dropped onto the ground and also found on the player body
better minecraft 1.20.1 (latest)
does feel like it should work like this, possible bug?
What mod causes the items to show up in the middle of my screen?
Hey, I was just wondering if anyone else has been having the same issues as me. I've been playing better minecraft for only about an hour now and my entire pc has crashed twice even after updating my graphics drivers does anyone know what could be causing this?
is this one or the fabric one better for newbies
How do I get the soul stealer enchantment
just needed to change to the latest version of forge
Hello, I would like to ask for some help. Is it possible to turn off the light of the torch when I hold it? It is causing severe lag (the fps drops to half of what it usually is).
i believe that is called dynamic lighting
I believe that but I can't find such an option in video settings, I couldn't even find the mod itself and I also couldn't find optifine (which I think also has this feature) 😦
optifine is the mod you typically use in vanilla minecraft, you wont ever see it in a modpack and you shouldnt ever add it yourself
Hey is the fabric or forge better for newbies
as in the 2 different modpacks?
the modloader itself doesnt matter for that purpose
Yeah for better mc
How to download mod?
press i
its not letting me launch minecraft
Brother you are going to need to provide more information than that
when i go to hit play in one corner it says better mc but then at the top i get a message saying failed to create profile and it wont launch minecraft
ive never played minecraft on pc so i honestly have no idea whats wrong
phoenixheist has been timed out for 2m 

Reason: Similar-Messages Spam
anyone figured a fix for sawmill with mohist? if i remove sawmill server runs fine until you break a log or open your inventory in createive
and if i leave it in the mods folder, server wont start up
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
bmc doesnt work on mohist
@stiff stirrup thank u I got it to work just needed to wait for it to install
so just wait for a new mohist version?
i mean i got it to work with v24 lol
and i got it to work with v26 outside of sawmill
id there an alternative
is*
using forge normally
Another question is there a multi-player server for better Mc or do we have to get our own servers I wanna play and meet friends
there isnt an offical server but you can try to find people hosting
or here too #community-servers-info
question
why does the crafting remote stops working everytime after I use the waystone?
Are you getting too far away from your base and haven't chunkloaded it?
oh u have to be around the same chunk?
got it
Right click and drag over an area and click claim chunk
Then repeat and select chunkload claim
somebody knows?
is it possible to hatch the leviathan egg
Update to v26?
Yes
what's a good seed to use in v26?
apple
Purple people eater
after trying out both versions, i gotta say forge version is way better
is there a reason why my skins arent working?? the first screenshot is vanilla mc and the second is better mc. i've tried googling it but i keep getting things from 2017 that don't work, is it just an issue I'm having? its doing this in older worlds and new worlds, i've tried deleting and remaking the skin but it just doesn't change. sorry if this isnt the right channel to ask this 
what launcher you using for bmc?
forge im pretty sure? i just go to the my modpacks section then hit play there
so curseforge
im not sure why it isnt working today since my skins were working yesterday
ahh okay okay, i wasnt sure if it was a problem with my game or the launcher
thank you for the info !!

does this with waystones and the tp command, do i have to enable cheats?
forgington
I believe so, or OP yourself if you're on a server
You can also make yourself a warp core stone* and teleport using that
No it's okay I just found another glacier.
Mine straight up didn't have an Ice Queen enclosure.
Kind of sad.
It's a maze I don't think she is always at the top, can be in a lower room
single player
ill turn cheats on
this is a mega noob question but how do you enable cheats for an already existing world ?
ive only played bedrock b4 so this seems a bit different
No I went into creative and destroyed the whole thing.
She was not there.
It took me an hour or two.
The princess was in another castle it appears
Not sure if there's an easy way to do that. I think there's a work around by editing the level.dat file and setting cheats to on, but not sure if there's a good way to do it in game
Warp stone might be easier https://mods.twelveiterations.com/mc/waystones/warp_stone/
do you think this would cause any problems?
It shouldn't, but always create backups before you make a change, I think you need a utility like NBT Explorer instead of a normal text editor
I'm trying to have my world gen for my server be "Large & BetterX" but what do I set my "level-type=" to in my server.properties?
Is it not just level-type=betterx ?
well there's betterx and then there's large & betterx
can you not get bad omen in the latest update?
Is anyone having a weird white screen tearing glitch that spreads then goes away?
On curseforge
Is there a way to make a server off bisect on an existing world?
How do I fight the calamity bosses?
why are chunks loading so slowly
Hi, so I'm relatively new to hosting servers, but I think there's a memory link in the modpack. I'm running the modpack with only 3 people and it's running up to 25GB of my ram.
I resetted the server and it resets to 12GB with 10 people on, and it stagnates around there which is good. Overtime, I realized that my ram usage increases once people leave specifically. Like I said it goes up to 25GB for some reason.
What jvm parameters did you set?
I set maximum to 32GB and minimum 12GB
I understand that it can go to 32GB, but there's no reason why it heavily increases with less people on.
The JVM will kinda just bloat if you give it the memory parameters to
Yeah, I'm assuming it's because of object handling in the language.
But I'll take a look at it, thank you >:D
for some reason vines are this texture. is there anyway to fix it?
I would say just relog, that seemed to help me with texture reloading
Or restart your client completely
Oh my god, I think I found the issue. I'm running Java 8...
That explains so much.
BMC4
- Download an adoptium release for Java (recommended but not required):
- Java 11 (https://adoptium.net/temurin/releases/?version=11) for versions 1.16.5 and below (can also use 8 if its not working)
- Java 18 (https://adoptium.net/temurin/releases/?version=18) for any versions newer (or 17 if 18 doesn't work)
- Consider installing the JRE instead of the JDK for a smaller file size
-
When installing through adoptium, make sure that Add to PATH and Set JAVA_HOME variable are both set to be installed (please see https://imgur.com/a/jPu1h7h for how that would look)
-
Check if java has been correctly installed by running java --version (or java -version on older versions), and seeing if the output is correct (see https://imgur.com/a/OWcoq4p for an example of the output)
- NOTE: 64 bit versions of java ALWAYS have '64-bit Server VM' in the version output. If that is not there, you have installed a 32-BIT version!! If you're getting Out of Memory errors or any other errors, PLEASE install 64-bit
- If the output isn't as intended, you have 2 options.
i) Delete ALL other java versions from your PC (ONLY recommended if you don't need them)
ii) Redirect your launcher/server to use your new installation of Java
Method i
- Uninstall any other java program listed in your programs list (differs by OS, please find a guide for your own OS if you don't know)
- Attempt to re-use the command mentioned above (if the output is now correct, which it should be, you are ready to go)
Method ii
- For a server, please modify the $Java/JAVA variable (found in your startup script depending on ps1/sh) to the path of your java installation. For windows, this path is usually found in "Program Files/Eclipse Adoptium/version_of_java/bin"
- For a client, depending on whether you use CurseForge, GD, or AT, the process is slightly different. Please see a guide for each respective launcher on how to change the java version.
yeah.. ty! I really was worried about my memory 😄
also is there a way to lower lag? my brother and I are trying to play on a lan world but he keeps on lagging
If you do more than a few sessions together it'd be better to set up a server instead. worldshare is more for short term playing together
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
Im getting issues about Invalid Heap Size
im using java 64bit, how would I fix this issue?
mind showing the error?
where did you add the ram amount?
can you link me a install for java?
you sure its java18 64x? and not 86?
^
I'll give updates on whether my ram is good or not in 50 minutes

._.
Hi! So I encountered another issue. I understand the dangers of portforwarding, but I'm hosting a server with just close friends.
When some people try to join, they get an error, "distance too far". I was wondering whether this is a mod pack specific thing? When I host a vanilla world, people are able to join alright. Or pixelmon, people would join correctly. It's just this modpack specifically that this probem occurs frequently. But they're able to join a few minutes afterwards though. But then they get disconnected again with the same error.
I just find it weird on how people are getting this error. Or sometimes they get other errors. I've been scurrying the internet for a proper solution, but nothing works properly
This is what I've tried so far:
- Disabled Firewall.
- Disabled iPv6 so iPv4 is proxying correctly through TCP and UDP.
- Resetting server multiple times.
- Have them update they're JRE to 18
you using powershell?
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
!powershell
An update to windows introduced a new security feature that prevents powershell files from running on your PC. This is great for your security, but not so great for our server start scripts, which require powershell to run them. Fortunately there is a quick fix for this!
Run powershell as administrator, then run Set-ExecutionPolicy RemoteSigned. Read the prompt and press accept. This will allow us to run scripts.
Next, navigate to your server directory using cd path/to/directory (for example: cd C:\Users\Username\Documents\Minecraft\Server)
You can now run the server by double-clicking the start.ps1 file, or typing .\start.ps1 into the command line while in the directory.
IF THE ABOVE DOES NOT WORK, TRY THIS
Run the command Unblock-File -Path .\start.ps1 in the same powershell window. This will allow the start script to not be blocked by windows, and run freely.
If all else fails, a manual installation should work:
FORGE 1.16.5: https://www.youtube.com/watch?v=bIjisWyxU-8
FORGE 1.18.2: https://www.youtube.com/watch?v=R610M102X0U
FORGE 1.19.2: https://www.youtube.com/watch?v=3HD0ibIpO-A
FABRIC: https://www.youtube.com/watch?v=b2W1Xb7nLKo
Make sure to Install the Server in our ServerPacks so it can use the correct files.
Yes
see if maybe the video above helps from the free method part
Will do, will give an update. Tysm 🙂
Boats?
is anyone else unable to load server
I portforwarded already, and setup the server correctly. Other people can join properly but sometimes (most of the time) they are greeted with many errors like, "distance too far." The script runs correctly, but I can try the powershell administrator thing.
yeah but i figured there should be more than just boats
like in the mood
mod
Have you tried topick them up gently like hamburger?
has anyone ever found dragon trees in the end, if so, where?
Any idea why my buddy is crashing in the server when he opens the game? It's completely new since we started a server, and we have added a mods. But he keeps getting crashed when his inventory opens and this as the report:
The game crashed whilst unexpected error
Error: java.lang.NullPointerException: Registry Object not present: mcwfences:oak_picket_fence
The game is working fine for me and one other person
the ancient factories now have mini guardians and a mini boss. wasn't prepared for that 💀
Yikes
where the final battle of my world will take place
Its so worth tho
pls ive been searching for an hour
cursed pyramids are always so far away like damn
Im sure people know this but I just tested it, if you are on a version that doesnt have better end, and you upgrade to a version that does, better end will not generate correctly
Is alexs caves going to be added to bmc4???
the left image is what the biomes are supposed to look like, the right one is what mine look like after having fought the dragon and loaded the end
most likely not
so if anyone knows how to reload the end somehow, let me know because I want this wood so damn bad
Awww why )':
im sure it was said a few times around
RAAAAAAAAAAAAAAHHHHHH I FINALLY FOUND IT
Huh what dat
the cursed pyramid from the cataclysm mod
OH WOW i didnt know that was in the mod, what boss is in it??
If there is a boss in it
yea it's new
the ancient remnant. a giant dinosaur skeleton that can make sandstorms
the only boss from that mod i haven't fought yet
whats the difference between the forge and the fabric version?
Please read #faq to see the modpack diferences.
Delete the end dimension in the world folder
upgraded my armor to netherite-gold. preparing myself for the ignis battle
Ok slay
can someone help me dowload better minecraft on my mac please
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
i downloaded it and it said that atlauncher cannot write files in its current location
nevermind fixed it
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
no mod adds that
update to v26
you have extended inventory open
press I
on your keyboard
#faq performance guide
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
thats not a fix
disable the dynamic lights mod
delete xaeros minimap mod
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
they fixed it already 
update your drivers
yes you can transfer your world files
#faq performance guide
!tps
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/Mukul1127/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel. If the profiler command doesn't work, put this mod in your servers mod folder
wdym "many errors"
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
It was some weird thing, he clicked on the game mode thing in the inventory and it crashed the game
It'd really help chorb if you filled out those questions
^
what's up with the mushrooms? I can't break them and it creates really buggy behavior with the blocks underneath. their also generating on blocks they probably shouldn't like stone or sand
Wdym
read
answer the questions. read the command chorb linked to you
.
Oh, I just didn't know what you mean by chorb my b
the person who was responding to you
I just saw the bot ig lol, my bad
I'll keep the questions in mind in the future, I got my problem solved
👍
Hi I just downloaded bettermc forge off of curseforge and I can't seem to get it to work
May I ask for some assistance?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
OK thank you!
no problem
im so excited to finnaly get this modpack running but for some reason the stuff in my inventory is staying on the screen even when i exit my inventory anyone know how to fix this?
there's a hide inventory hud keybind
search it in control settings
Hi. I have downloaded BetterMC from Curse forge and want to play it with my partner on LAN. The host to LAN option in game was too slow so I downloaded the server pack and I am hosting it locally off my PC.
I have gotten it to launch and I can join it on my PC but I cannot get their laptop to join even though we're both on the same LAN.
Any suggestions?
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
yessss it worked thank you!
i genuinly appreciate the help
no problem
also
!lan
Use !ws instead
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
That is what we tried. I am in Australia and our internet here in notoriously bad which is why I was looking for a LAN solution.
Thank you for your advice!
oh, then port forward your router
it's a lot better tbh
don't use lan
WS is based in the US, so yeah port forward will be your best friend as it'd be more local and less latency
!server (2nd part)
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
If you're having issues with your friends joining your server, your port for Minecraft may be closed.
-
Check with https://portchecker.co/ with your IP and Minecraft's port (drop down menu) to see if it's open.
-
If it's closed you will need to search online "How to open Minecraft port for server with (ISP Name)
Important note: a lot will allow port forwarding, but there may be some ISPs that will not allow any port forwarding. Please check online if this is the case for yours.
while im playing my fps goes up to 160 fps but when loading new chunks my game freezes up for a second to load up those chunks how do i make it more smooth
im on a m3 macbook pro with 8gb unified memory
if anyone has any tips they would be greatly appreciated
8gb between graphics and cpu is pretty rough. There's a chunk generation mod that you could probably run overnight to smooth it out?
yeah i wish i knew how to do that im so new to all of this im coming from a xbox
!pregen
Noob explains how to Pre Generate your Minecraft World.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Modpack: https://www.curseforge.com/minecraft/modpacks/better-minecraft-modpack
➔ Discord: https://discord.com/invite/9S5tfrY4Fr
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Want a Server?
BisectHosting: https://www.bisecthosting.com/LunaPixel
Use the code "LunaPixel" t...
!fps also follow this.
WHERE DO I GET CONVERGANCE MUSIC DISC
can someone translate what this means
Seems like warns? is there an actual issue?
exit code 1 always happens, im not sure what im doing wrong sobs
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
please don't double post. it's best to keep it in your post in #1061339968691257466 as you did modify the pack
💀
Hello i am new to better mc and want to know if there is any videos ab early game farms or any stratagies that i should do. Its me and a friend and we currently have diamond gear but thats ab it Version 1.20 i belive or the newest one thats out
have you and your friend been following the quests?
Yes and no. We were trying to find tutorials on xp farms or anything like that to get enchantments going but we cant find a desert to get rabbits to get a backpack or anything lol
can't recall if bmc has it, but search in there for the nature's compass, you can use that to help find biomes
yes i see it
make one, right click, search biome you want, click search
thank u
anyone know how to remove the scoreboard that is being displayed?
This randomly displayed and not sure how to remove it
how to find wither skeletons head guys
i kill a lot of wither skeletons and it didn't give me any head
Do you know any other items like this that can be used for other stuff like finding ores or certain mobs?
And do you know of any youtuber that does tutorials for better mc like farms and such
Creators off top of my head no, for mobs or ores no, but there is one called explorers compass for structures, not sure if that’s in bmc though. Best suggestion is looking up bmc forge on YouTube see if there’s any recent stuff.
Also with inactive spawners how do i link them to a mob
Not sure honestly. Last time I played bmc was on 2 or 3
Doesn’t hurt to check if something is in the quests about it.
Don't you need souls or something?
And do villagers take forever to get a profession for anyone else? I'll sit for like 5 minutes before the villager selects a new profession after I place a lecture back down
I swear half the time I feel like villagers may have adhd hardwired in their coding.
As Zanthus said, there's an enchantment called* soul stealing that adds a chance to give you a soul of the monster you kill. Right click the soul on the incomplete spawner and it becomes a normal spawner. Some souls need additional crafting, like wither skeleton souls
I've sat here near 10 minutes and this villager hasn't became a librarian
Is there anything else that could be distracting them?
I didn't know for sure
Maybe they were born to be a dancer
Maybe lol
I don't have any professions or anything nearby them
Except a lecturn
There is a bed
Don’t groan at me, but what if you try leaving and going back into your game? 👀
It's in a server
Would that even work?
We also just restarted the server like an hour ago
I have a friend building on top of where I'm tryna do the villager thing for mending
Have you tried... murder? and a new villager?
Literally my buddy's first response lmao
So we put down a door and he took the profession
Ez
.q @steep flame
Reason: No reason.
Staff: @agile cradle

serpmount__ 
All users were quarantined!
"Distance too far"
"UFFD UFFD UFFD (infinitely repeating)"
Exceptionhandling, etc.
I've noticed that it only does this when people are off my network and joining outside. But they're able to join after some time, just to be disconnecting 5 minutes later.
But I have two roommates that are on the same network who aren't having the same issue.
That is super odd, what's the path to your server files?
It's just to my Desktop. I have a folder containing all the necessary files.
But again, people within the same household as me can join perfectly fine.
It's literally when other people from outside the network get these errors specifically.
They'll join after 2 minutes of spamming, then they'll play for a good 10-15 minutes, then crash into either the whole app, or just to the main menu, just to repeat the whole process again.
I ensured most of them are running the right java version. They all have the same mods as I walked them through the installation process.
So I'm not sure what's happening. I'm assuming it's due to a networking thing, which is strange, because everything is portforwarded correctly. When I host other servers like pixelmon or even vanilla, I don't tend to have that problem.
Have you tried restarting from scratch with bmc fresh download and such?
Yup. Did that already.
Are you running any custom mods?
Nope. Everything is through the BMC modpack.
Downloaded the server pack through curseforge.
Did you get the v26 server pack or the v7? I think curseforge doesn't properly server the pack
I just find this issue strange. I've been searching for solutions on in the internet for a while, but to no avail, I don't really can't find one.
Curse is only place to get the serverpack
^^ that's what I'm saying.
I’ve not seen this before
Yeah me neither. I tried hosting a different modpack today (the medieval one you guys have), and it works perfectly fine.
No clue, the problem seems to be twilight forest every compat using a character that's not lower case a-z, numbers 0-9, or /._- (seems to be the https://www.compart.com/en/unicode/U+FFFD character)
Might be good to reach out to twilight forest then.
Updated, it's the everycompat mod part with TF
And you didn’t manually update any mods right?
That is correct. I downloaded it straight from curseforge and extracted it.
If you'd like, I can probably redownload a separate file and copy paste the mods into my existing one just to test it out as a future reference.
Mk, then imma be a meanie and tag @viral garden for further kelp
when she has the chance.
Ofc! No rush. I really do appreciate you guys for being patient with me 🥺
I can probably do this though, I'll make a backup of course.
Yeah, I got no pie in the sky guesses with those errors. Just curious are all your users set to english locale in windows? saw some error reports in an unrelated mod that referenced that as an issue. (shouldn't be, but just curious at this point)
Everyone here resides in the same state and have their locations set to the U.S.
That's why I'm finding it weird.
I can just do what I said earlier and copy paste the mods. If I do that, are there anything in specifics that I need to change?
Best option I can give then is a chorb lifeline then, she may have some more tinkering of an idea on fixing this.
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
might be a hidden error or exception in the logs
If you can get it to run about 15-20 min see if you can run spark
!tos
!tps
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/Mukul1127/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel. If the profiler command doesn't work, put this mod in your servers mod folder
Never know. Something might give us some kind of nudge. Couldn’t hurt
will say server seems stable, the clients seem problematic, but no troubleshooter ever was made mad* for more info 🙂
Will do! Again, ty for being patient ::
I will probably give an update later today giving logs and details.
Again, tysm >:D
It’s a funky one, so if we can get yours figured out, we may have something to lean on if it pops up again
^^ Will do. Is there a way to report the logs. I'm looking at this, do I just answer it in this format in the chat?
For the log files you can typically just drag/drop into this chat
You’ll get a link after you stop it to drop in here.
I'm just afraid that some ppl's IP will be given (for when ppl join the game)
Nah spark doesn’t get that info
Okay, just making sure. Sorry for being paranoid ::
You can see one of my spark links here: https://spark.lucko.me/wkeVh042Vg
Alrighty, tysm >:D
Do you guys mind if I ping if I do get an update later on within the day?
The log files have some data like local file paths and Microsoft account names, but if that is a problem, it's not helpful for troubleshooting so you can purge that if you want.
Noted 🫡
Someone should ping you in a while, if it goes mor$ than 24 hours just poke me and say (hidden said I could this time)
Yeah, the team here is very good about reading through and replying from what I've seen
Unless you ask if one of the 3 million random mods will work flawlessly with this curated mod pack of 330 mods 😛
Try at own risk : 😉
That's so real though 😭
My friend is still getting the same error 😭
Update: I deleted Twilight Mod and the Umbral Skies mod and he seems to connect a lot more frequently; however, he still gets an interesting error called, "Invalid, distance too far back" or something along those lines.
Ima keep this server up early morning (in 6 hours for me) to test when everyone can hop on and such.
Again, tysm for taking your guys time to help >:D
But here's the error message he's getting.
Anyone knows why using Recipe book to craft items sometimes does not pull the items into the crafting table?
What mod pack are you using? the recipe book isn't really supported using big mod packs, JEI should typically replace it.
Do incomplete either skeletons drop wither skeleton souls?
Is there a list for what villagers trade in this pack?
Like a possibility of what the villagers can trade in later stages and stuff
how to get in this? i cant find the way to get in
BTMC 4
you did not install the modpack correctly
i dont even know what you're playing here
you have no resourcepacks installed
and somehow your hunger bars have the appleskin overlay
please read the #faq performance guide
thank you a lot but how can I disable a mod? after some googling I found some solutions how to disable it but I cannot find it in the list of mods...in the config and default config folder I did find dynamic light toml file, is that what I should change?
you pinned the quest in the ftbquests menu
send a log please
@flint kindle figured i should ping you for this - do you think this could be the case?
which modpack are you playing
so i can check which dynamic lights mod is being used
Better MC [FORGE] - BMC3 1.19.2 v20
Thank you so much, it worked!
can you provide examples? best guess you have multiple materials that can fill in the recipe, but can't work with each other
my problem is i cant find the way to get in
i cant dig the block to get in
Well thing is I'm not sure. I've seen that many times. It's something normally can't happen. No mod has invalid resource location paths
I once see it happen with a system having a different language. Somehow that confused the game and some chsra tera turned into non English ones making it appear
Re downloading mods might also help
rarely hurts
And your system language is English?
Weird that that character is question mark usually used formissing /unknown characters
consol is getting spammed with this, bmc3 1.19.2 forge
worth sweating over this or should i just ignore it?
hi, the waypoints function isnt working correctly in my world. when i set a waypoint in the nether and teleport to it (map mod) it teleports me to those coords but in the overworld.
You have to find the entrance, cant break the dungeon block. I had to dig around
Hi !
Just found out that Better MC on forge is by default in v.24 while server pack is in v.26 ! 🙂
Im getting exit code -1 and don’t know why I haven’t changed anything and it was fine before today anyone know the cause
I figured it out I needed to go back to a previous version of a mod
how? i kill it and i dont have ignigium ingot?
i think you have to be teleport in the nether
or use a waystone
exploring or craft a specfic eye that will guide you like an ender eye
for more information use this guide https://www.minecraft-guides.com/mod/cataclysm/
the ignium ingot you don't need taht is a reward
a yes
i dint read right the message
so why i dont get ingot bro?
really and don't know think the quest is bugged and don't ask me ho to resolve it becouse i dont know, try to ask more informed guy than me
ok bros
Same problem here :/ are you on the 24v? @swift jungle
i fixed it by deleting xaero plus mod
im om bmc4 v26 i think
ohh, nice to know
Hey, are like ocean ruins more rare in this modpack? I've been searching for ages 💀
Question, I'm playing BMC4 v26 and hosting a server at the same desktop (localhost). I am constantly getting "Can't keep up, server is running behind" error. I have 64GB RAM available but increasing Xmx/Xms doesn't seem to help at all.. What are the best settings I should use?
how much cant keep up server is running behind
depends how high it goes measures will be used but if its like 40-80 its fine
Going from 40 to 350 ticks
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/Mukul1127/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel. If the profiler command doesn't work, put this mod in your servers mod folder
run this for like 20 minutes
then do /spark profiler open after that time
and send the link here
Will do, thanks

We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
If your desktop has good specs you can run it yourself & portforward your ip
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
If you've never done it I suggest watching some youtube videos
and please dont go into DMS
no it is pretty shit
?
please read it god damn
Its Free.
and its Already In The Pack.
no.
yes
then follow the !ws guide
ah
bmc1 doesnt have that world sharing
youd need to do the !server things
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
well
its illegal, malware and not allowed
so show proof you own mc or leave 🙂
from minecraft.net
not there
show that you Have an account
if not then say so
ok so youd wanna buy one
you have how ever long you need on that
but you cant stay here :p
.ban 1067059684319711232 ?r cracked user, please switch to approved launcher and provide proof you own official Minecraft. Cracked launchers are against TOS, illegal, and have spyware.
Reason: cracked user, please switch to approved launcher and provide proof you own official Minecraft. Cracked launchers are against TOS, illegal, and have spyware.
Moderator: @stiff stirrup

Details:

Duration: 

Soft Ban: 

Hack Ban: 

DM-Members: 
lpx_therealfreeze
All users were banned!
thats why
lower your view distance and server distance to 7 it should help a decent chunk
You mean both client & server side?
just server
Set view distance to 5, shall I change anything else? for example simulation distance?
Perfect, thanks bud

Doesn't seem to help much unfortunately, but I'm starting to think it's internet related
Keybinds are lagging like hell
.softban @mint furnace ?r compromised account
Reason: compromised account
Moderator: @stiff stirrup

Details:

Duration: 

Soft Ban: 

Hack Ban: 

DM-Members: 
protzy2go
All users were banned!
:3
I allocated 12 GB clientside 🤷
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
i wanted to add some extra biome and structure mods to the pack i was just wondering if any of them would cause issues or be incompatible
for 1.20.1
my game keeps crashing no matter what
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Im having a problem launching the game. 1. I have not modified the modpack 2. CurseForge 3. not sure, either latest release or the forge 47.2.17 4. v26 5. launching the game gives me an exit code of 1 6. I have not made it past this crash 7. See file 8. cant find the perfromance guide. Could anybody help?
hey guys, is there any like guide for the modpack? like a progression chart or something along those lines
8.yes
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
do the same thing above
thanks, will do
apologies for the late enough reply that it’s it’s stock BMC4 Versiom 26 through ATLauncher but I only disabled the hud/block related resource packs out of personal preference and only added appleskin for convenience. it’s an otherwise entirely untouched setup and I have gone through the steps for the performance guide as well as tweaking some video settings and usually achieve 100-200+ fps
I’m usually hesitant about touching packs at all for resons you outlined but if my confusion was over that mushrooms exclusively seem to bug out when broken. this is behavior I had observed on an entirely unmodified instance in the past as well
amd radeon rx 6600
update your drivers
u the goat love u fr
I've been getting this texture on seemingly random things, and when I close BetterMC and restart it, it gets fixed. Does anyone know what might be causing this?
Is this a server, or a local single-player server?
?
Referring to this.
gotcha
does anyone know what to do when ur game is laggy ass hell bc i cant even move anymore and i dont see blocks
!fps
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
#rules rule 2
my bad
thank you 🙂
im tryna download the server pack from the website and it says manifest file does not exist
i got 8 ram
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
i cant
do i need to delet a few or sum
how my friend supposed to join
all it says is port
it doesnt say share world
it just says lan
@grand gate ?
Hey people, there are a bunch of slots in curious that I have no idea what theyre used for. The curious website states that the devs pick what slots are open so in reality they should all hold a purpose. But they don't unless I missed something. The feet slot doesnt hold boots, and the glove slots dont hold the aether gloves as they have their own interface.
wym dif modpack?
Let me interject here, I am running my server on a different provider and i use 6gb, and it runs perfectly fine with 4 people on it
So idk what host you speak off
I said in my message that the aether gloves do not work
oh yeah nah 😭
minecraft itself needs atleast 6
honestly? Pay for a server, if you can't then use peer to peer like hamachi which can be a drag to set up
yeah im poor
Also
There are online servers that run the modpack
You can claim a bunch of land and do your thing
Like any other FTB pack
I tried looking it up but found nothing
Only ones are the belt backpack and slots for accessories
oh shit how are you doing that
looking up per slot
bro can someone help me im not tryna use some website and my share world dont pop up
@stiff stirrup
can someone help me with this bru
@digital night
blaze can u help me
I cannot provide support for better mc, I have no experience with the modpack sorry
hi
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
illager invasion throws me an error
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
whenever i run it with powershell it opens then closes
!windows11
An update to windows introduced a new security feature that prevents powershell files from running on your PC. This is great for your security, but not so great for our server start scripts, which require powershell to run them. Fortunately there is a quick fix for this!
Run powershell as administrator, then run Set-ExecutionPolicy RemoteSigned. Read the prompt and press accept. This will allow us to run scripts.
Next, navigate to your server directory using cd path/to/directory (for example: cd C:\Users\Username\Documents\Minecraft\Server)
You can now run the server by double-clicking the start.ps1 file, or typing .\start.ps1 into the command line while in the directory.
IF THE ABOVE DOES NOT WORK, TRY THIS
Run the command Unblock-File -Path .\start.ps1 in the same powershell window. This will allow the start script to not be blocked by windows, and run freely.
If all else fails, a manual installation should work:
FORGE 1.16.5: https://www.youtube.com/watch?v=bIjisWyxU-8
FORGE 1.18.2: https://www.youtube.com/watch?v=R610M102X0U
FORGE 1.19.2: https://www.youtube.com/watch?v=3HD0ibIpO-A
FABRIC: https://www.youtube.com/watch?v=b2W1Xb7nLKo
Make sure to Install the Server in our ServerPacks so it can use the correct files.
it just says not found
please be more specific
cd : Cannot find path 'C:\Users\Admin\Documents\Minecraft\server' because it does not exist.
At line:1 char:1
- cd C:\Users\Admin\Documents\Minecraft\server
-
+ CategoryInfo : ObjectNotFound: (C:\Users\Admin\...inecraft\server:String) [Set-Location], ItemNotFoundE xception + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SetLocationCommand
send a screenshot of the C:\Users\Admin\Documents\Minecraft\server directory
is that a real directory on your computer or did you just copy from the example lol
the path to where the server pack is
yeah
i put it in and it worked
but then when i try the .\start.ps1 it doesnt work
i got it
nvm
how do i get the address and stuff
?
follow the guide then
now it just says unexpected custom data from client
watchu pinging me for?
ITWAS A MISS INPUT
which bmc are you playing
bmc3
you pinged blaze aswell..
um what is bmc
i did do it acidentaly
should have it
no where here says MB didnt mean to @ you
you need the same modpack installed client & server side
read #faq for modpack installation
you probably have an old version of the modpack clientside
I updated local bmc4 server from version 24 to 26, created new world but doesn't load chunks only starting 64 than it kinda freezes loading... still playable but only in that loaded area. Is there something to setup? I also tried downgrading to v25 same problem here.
!tps
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/Mukul1127/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel. If the profiler command doesn't work, put this mod in your servers mod folder
do not downgrade to v25.
did you ever get an answer to this? Or did it just go ignored?
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Stupid question.. how do I pick up the backpack from the shelf
Tried it. I don't have much problems with performance on server, when I was playing on v24 world was loading really fast generating chunks... but now I upgraded and it's not generating at all. Mobs doesn't seem to lag player too. I don't know what changed from v24 that could potentially destroyed.
What has changed is I see now bunch of errors like this. I'm running java 21 tried also 18 no change there
[21:37:06] [main/ERROR] [or.be.wo.to.ut.Logger/]: [worlds_together] Error for jar:file:///usr/local/minecraft-server-bmc4/mods/suppsquared-1.20-1.1.12.jar: java.nio.file.NoSuchFileException: /fabric.mod.json
When upgrading to v26 I replaced dirs from server pack I kept others in place.
this doesnt help
!tps please read the text
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/Mukul1127/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel. If the profiler command doesn't work, put this mod in your servers mod folder
ah didn't know where to get link from :D sry. https://spark.lucko.me/0If1M5h7QE
!cracked
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
it's server... not launcher I'm running start.sh script
yes I set it up for testing with 2nd player
kk gim me sec
should I run server with connected verified player or just need to run without connecting again?
you can do it with console
but if its lagging youd wanna do it with all the players online or something
Map/chunks isn't loading even if 1 player, I can move kill mobs smoothly.
Noob explains how to Pre Generate your Minecraft World.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Modpack: https://www.curseforge.com/minecraft/modpacks/better-minecraft-modpack
➔ Discord: https://discord.com/invite/9S5tfrY4Fr
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Want a Server?
BisectHosting: https://www.bisecthosting.com/LunaPixel
Use the code "LunaPixel" t...
but still need that proof 😛
https://spark.lucko.me/aT6RPldsNf without player
some help, please
!fps
not for fps, the world has loading problems and the world has server lag
!tps
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/Mukul1127/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel. If the profiler command doesn't work, put this mod in your servers mod folder
also for how long should that command be running optimaly
1 player in online mode for 15 minutes with that log is enough right?
mhm
and can i run it afk or do I have to do something?
do something for it to lag
^ still need this tho
like show a screenshot of ur minecraft launcher when you are logged in
that works
I've got a problem w my server, everytime I start it, it works for a minute or so and then the watchdog crashes it
anyone had it before?
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
ty
1.didn't modify
2.curseforge
3. 1.20.1
4.v26
5. launch the server
6.nope, I just installed the server, tried like 5 times and always works with a lot of lags for a minute and crashes
7. I have the crash log from the server should i just upload it here?
8.yeah
yes we need #7
set maxticktime to -1 in server.properties
I downloaded the server modpack and used curseforge app for client I tried both version 26 and 25.5 but it always said i am missiing mods on server, am not crashing just cannot connect. i checked latest.log and it says the CLIENT is missing mods, not the server, how 2 fix this?
- no
- curseforge
3/ 1.20.1 - tried both 25.5 and 26
- see above explainatioin
- nope
- should i send latest.log?
- no, but my problem is not related to crashing
read #faq for modpack installation
and you need to be on v26
yo what is the best version of bmc
that was an opinion question
i tried both 26 and 25.5, both dont work
also i am using itzg/minecraft-server docker image to run the server with docker, but all the logs indicate that the serverside mods are installed correctly
i also tried to install the client manually by downloading from website, but only 2 mods were loaded there
wondering am i installing the client wrong?

