#better-mc-forge
1 messages · Page 181 of 1
you got this
What i can do with broken spawner?
hello everyone!!! better mc is technically one of the first mods im installing on my own (i had siblings help me out before) and i can't seem to get it to work. where do i drag the zip folder? i've been trying to load it into the forge mods folder and nothing's popping up. please help!! thanks!!
You need a modded launcher for it to run properly. And these are modpacks. They contain lots of mods.
You’ll need something like modrinth, atlauncher, or curseforge to install it properly and run modpacks.
got it, thanks so much!!! :D
got it working, thank you!
Hey my server shuts down when I close Putty. Can I work with screen here or is there another fix?
putty?
If it’s hosted on your computer of course it’ll shut the server down when you close it
I converted an external PC into a server
Then don’t close the external pc
But a Linux server is running on the PC
You’re running Linux on the computer or you’re running a Linux Mc server on the pc?
Simple solution is don’t close the computer the Mc server is being ran on.
Wow, I imagined it would be more difficult
No just stop closing it xD

Sorry haha
ur good
Could someone help me understand why my server is running bad? chests, furnaces, crafting benches etc take forever to get into and blocks breaking are delayed and the block doesnt drop until seconds after. I tried restarting the server but that didn't fix anything. It usually runs great, is it just my internet?
!tps
Please click this link and follow the guide. If you are using a server host such as Bisect, you may be limited in your options and instead have a checkbox to use Aikar's Flags, which will also work:
https://github.com/brucethemoose/Minecraft-Performance-Flags-Benchmarks
If you can not launch your server/game after using these flags, then remove the word java from the start. Also, make sure you are using Java 18 on 1.18.2 / 1.19.2 and Java 11 on 1.16.5. These should be downloaded from Adoptium's website.
If lag persists, install Spark to your server do the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
How are you running the server?

thrugh bisect, its 7 gigs
With your game open, press tab and hold, what does the connection bar show?
Also do the spark thing like tamz mentioned obviously.
it shows 4 bars green but took solid 5 secs to open something
ok ill try that
run it for 10 to 15 minutes then do /spark profiler open and send a link it gives in this channel
Into this channel
hmm i’d suggest making a ticket
that ping is rlly high
so the lag is from ping? not my internet? wdym making a ticket sorry
ping
you have bisect right
yes
Thanks
just say “server lags hard but tps is fine but ping isn’t. could this be a possible node issue?”
Okay ty, i can stop spark right
it’s always on
oh alr
Okay thank you
nps
anyone else get the zoom bug
what bug
where your mouse moves like OF zoom after zooming in
just zoom in again and out
doesnt work
try re log into game
like yk how in zoom mouse is like delayed and accelerates weird
yeye ik wym
weird
Hello ,i need some hlep my friend gets Exit Code 1 when he launches the game what's the fix ?
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
i did not modify the modpack, im using the curse forge launcher, version 1.20.1 , Modpack Better Minecraft Foorge, when launching the game it crashes,6. no i have not
This is the crash report
@stiff stirrup so any idea why it's crashing ?
i’ll check rq
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
!openjdk
- Download an adoptium release for Java (recommended but not required):
- Java 11 (https://adoptium.net/temurin/releases/?version=11) for versions 1.16.5 and below (can also use 8 if its not working)
- Java 18 (https://adoptium.net/temurin/releases/?version=18) for any versions newer (or 17 if 18 doesn't work)
- Consider installing the JRE instead of the JDK for a smaller file size
-
When installing through adoptium, make sure that Add to PATH and Set JAVA_HOME variable are both set to be installed (please see https://imgur.com/a/jPu1h7h for how that would look)
-
Check if java has been correctly installed by running java --version (or java -version on older versions), and seeing if the output is correct (see https://imgur.com/a/OWcoq4p for an example of the output)
- NOTE: 64 bit versions of java ALWAYS have '64-bit Server VM' in the version output. If that is not there, you have installed a 32-BIT version!! If you're getting Out of Memory errors or any other errors, PLEASE install 64-bit
- If the output isn't as intended, you have 2 options.
i) Delete ALL other java versions from your PC (ONLY recommended if you don't need them)
ii) Redirect your launcher/server to use your new installation of Java
Method i
- Uninstall any other java program listed in your programs list (differs by OS, please find a guide for your own OS if you don't know)
- Attempt to re-use the command mentioned above (if the output is now correct, which it should be, you are ready to go)
Method ii
- For a server, please modify the $Java/JAVA variable (found in your startup script depending on ps1/sh) to the path of your java installation. For windows, this path is usually found in "Program Files/Eclipse Adoptium/version_of_java/bin"
- For a client, depending on whether you use CurseForge, GD, or AT, the process is slightly different. Please see a guide for each respective launcher on how to change the java version.
whatever the hell the 64x version for arch linux you need use that
and possibly update drivers
- Download an adoptium release for Java (recommended but not required):
- Java 11 (https://adoptium.net/temurin/releases/?version=11) for versions 1.16.5 and below (can also use 8 if its not working)
- Java 18 (https://adoptium.net/temurin/releases/?version=18) for any versions newer (or 17 if 18 doesn't work)
- Consider installing the JRE instead of the JDK for a smaller file size
-
When installing through adoptium, make sure that Add to PATH and Set JAVA_HOME variable are both set to be installed (please see https://imgur.com/a/jPu1h7h for how that would look)
-
Check if java has been correctly installed by running java --version (or java -version on older versions), and seeing if the output is correct (see https://imgur.com/a/OWcoq4p for an example of the output)
- NOTE: 64 bit versions of java ALWAYS have '64-bit Server VM' in the version output. If that is not there, you have installed a 32-BIT version!! If you're getting Out of Memory errors or any other errors, PLEASE install 64-bit
- If the output isn't as intended, you have 2 options.
i) Delete ALL other java versions from your PC (ONLY recommended if you don't need them)
ii) Redirect your launcher/server to use your new installation of Java
Method i
- Uninstall any other java program listed in your programs list (differs by OS, please find a guide for your own OS if you don't know)
- Attempt to re-use the command mentioned above (if the output is now correct, which it should be, you are ready to go)
Method ii
- For a server, please modify the $Java/JAVA variable (found in your startup script depending on ps1/sh) to the path of your java installation. For windows, this path is usually found in "Program Files/Eclipse Adoptium/version_of_java/bin"
- For a client, depending on whether you use CurseForge, GD, or AT, the process is slightly different. Please see a guide for each respective launcher on how to change the java version.
Thank you
np
yep its what qwek said you should do
that is a driver issue 
Hi, i have question too. I have two different GPU in my system, nvidia and amd (intergrated in my CPU) the problem is that better mc uses the amd and not the nvidia gpu. I dealt with this problem on my older pc so I found my javaw.exe file and added it in to graphic settings as performance app (uses nvidia gpu) but that doesn't work as well, i tried other files and also jre_8 that is installed in curseforge but nothing helped. Does anyone have any idea how to solve this issue? Thanks! 🙂
ik the solution to ur issue
let me get it
also holy shit 400+ fps on a igpu?
insane
Thanks!
np!
btw that issue with mc is due to control panel not being set right
once you set it right its all good
bro knows everything

is there a way to pickup spawners in bmc4?
I aint gon cry too long
im back on my drip
drip my drip my drip
im back on my drip
I get this as an error now after updating all drivers
uninstalled curse forge and everything
laptop? 
yes
^ use this guide aswell
np
appreciate it

is better mc plus 1.16.5 still playable and downloadable at what website it still has it does anyone know?
no its gone
But is it still downloadable and if anyone has it? or there is a website that still has it?
not downloadable no
But does anyone have it because i loved it
Because i hate the better mc plus 1.19 because it has end remastered and no ice and fire
For users who are experiencing issues with the built-in GLFW, there's a quick and easy solution for you to use the latest, bug-free GLFW that can remedy the solution.
- Download a pre-built GLFW library from my repository at https://github.com/Frontear/glfw/releases. Ensure you download the correct file from the desription of the release. You may also compile it yourself, details can be found here: https://www.glfw.org/docs/latest/compile.html
- Save the file in a location you can remember and will NOT delete (the file MUST stay there or else it will stop working)
- In your launcher, go to the java parameters (this is the place you put your GC arguments), and add
-Dorg.lwjgl.glfw.libname="path/to/the/file". If, for example, you downloaded the file in your Downloads (C:\Users\Me\Downloads\glfw3.dll, then your argument would be-Dorg.lwjgl.glfw.libname="C:\Users\Me\Downloads\glfw3.dll")
here you go!
so
for the shiny block thing
someone on reddit said it is literally just the stay true texture pack
no idea still weirdly
is it in there?
which sucks bc i’m at work rn and can’t test
this has become like a three day expedition for me 😭
hey guys sorry for the bother, I wanted to know how to allocate more ram to my bmc4 server ( forge ) when I edit the user.jvm.args file it defaults back to 4gb when I boot the server.
inside the variables text
go inside the java_args="" area and write inside the "-Xmx#G" the # being how much ram you want

np!
worked perfectly thanks again
np
super fast question is there any reason that this pack shouldn't work on Lan I installed it using the faq instructions cause it was crashing so much on CF
wym lan
like open to lan
or world sharing
lemme insure it doesn't crash first
I wanted to know ahead of time before I got everything set up
How about a question, I updated my mod pack and the shaders and textures were removed, is there a solution?
did you update like this
!Updatemodpack
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
No
@stiff stirrup now we crashed on Lan
nope fresh
thank you
try to just delete world and regen
you got it I'll try later
as simpler way you can just rename the world that just got made and server will make a new one
ima make a world rn on the curseforge bmc4 modpack lan server
to see if it works
I tried that but I think the sever launch got stuck
let me try
just here yeah?
this is as far as I get after I launch
it should auto close no?
after I hit launch and close
works fine for me
cause now its up then I launch the normal modpack online then from there go into mulitplayer yaeh?
or should somthing happen after this line
go into multiplayer -> add server -> Localhost if its hosted on ur machine
up and running thank you so much I followed these exact steps last time and it would keep crashing
wait
does it work now? orrr
It did not no
ah that issue
those Happen on clients
but it shouldnt crash you too bad? 
the thing it
is*
it happens sometimes
it just be like that?
trying
if it happens again try updating drivers 
drivers are fully updated
didn't even launch this time
I'm gonna relaunch server again and try one last time
- Download an adoptium release for Java (recommended but not required):
- Java 11 (https://adoptium.net/temurin/releases/?version=11) for versions 1.16.5 and below (can also use 8 if its not working)
- Java 18 (https://adoptium.net/temurin/releases/?version=18) for any versions newer (or 17 if 18 doesn't work)
- Consider installing the JRE instead of the JDK for a smaller file size
-
When installing through adoptium, make sure that Add to PATH and Set JAVA_HOME variable are both set to be installed (please see https://imgur.com/a/jPu1h7h for how that would look)
-
Check if java has been correctly installed by running java --version (or java -version on older versions), and seeing if the output is correct (see https://imgur.com/a/OWcoq4p for an example of the output)
- NOTE: 64 bit versions of java ALWAYS have '64-bit Server VM' in the version output. If that is not there, you have installed a 32-BIT version!! If you're getting Out of Memory errors or any other errors, PLEASE install 64-bit
- If the output isn't as intended, you have 2 options.
i) Delete ALL other java versions from your PC (ONLY recommended if you don't need them)
ii) Redirect your launcher/server to use your new installation of Java
Method i
- Uninstall any other java program listed in your programs list (differs by OS, please find a guide for your own OS if you don't know)
- Attempt to re-use the command mentioned above (if the output is now correct, which it should be, you are ready to go)
Method ii
- For a server, please modify the $Java/JAVA variable (found in your startup script depending on ps1/sh) to the path of your java installation. For windows, this path is usually found in "Program Files/Eclipse Adoptium/version_of_java/bin"
- For a client, depending on whether you use CurseForge, GD, or AT, the process is slightly different. Please see a guide for each respective launcher on how to change the java version.
java18?
follow pinned messages guide
there is 2 pictures
follow both
you do have the javas but you dont have it set
np!
maybe? depends
Is glassblowers workshop working? trying to make jacaranda glass blocks but it won't work
!define
Curseforge - Refers to both the Curseforge website and Curseforge Launcher. The Curseforge Launcher is a modded launcher used to play & install modpacks. ATLauncher is a better alternative. All modded launchers can be used to install & play both Fabric and Forge modpacks.
Modpack - A collection of mods. "Better MC 1.19.2 Forge", for example, is a modpack.
Modpack Version - The version of the modpack you are playing. v5, v6, v7, etc.
Minecraft Version - The version of Minecraft which the modpack you are playing runs on. 1.16.5, 1.18.2, 1.19.2, etc.
Mod - A .jar file which modifies the game in some way. "BetterEnd", for example, is a mod.
Forge - A mod loader which allows you to use Forge mods.
Fabric - A mod loader which allows you to use Fabric mods.
okay, so does better mc need all fabric and everything, or can I just buy "Better MC - BMCI"
FORGE = A Modloader that uses FORGE specific mods [Main mods on FORGE that are not on FABRIC are Alex Mobs, Ice and Fire, Blue Skies, Original Aether, Dragon Mounts: Legacy, TeamAbnormals Mods, Biomes O' Plenty, L_Ender 's Cataclys, MineColonies + many more]
okay im fine not having the fabric
Okay so decide which one you wanna play
Ok
Is there a way to limit the amount of chunks a player can claim
#server-hosting has the how-to's
what is the link to download for 1.20.4 on cursforge
BETTER MC [FORGE] 1.20.1 V24 HF
do I download this?
okay I shooould be good to go
there is no 1.20.4
yep
it works
niceo
I'm trying to play the game in game pass and this error is showing... How I fix it?
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Hi, I'm playing on Better MC [Forge] 1.20.1 V24 HF
I tried to make a mob spawner farm. I moved a zombie villager spawner, it spawned a batch of zombie villager, and then turned into a vex spawner.
Any idea why ?
Anyone run the server for the 1.20.1 ver on java 18? Wondering if it works for this pack.
yeah java 18 is actually what we recommend for 1.19.2 onwards anyways
is the essential mod compatibale with better mc?
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
guys can someone help me with my world now?
when i join my world the game crashes everytime
pls ;-;
no
Using shattered dimensional carver to get to world border, went 17m blocks east, game crashed and now can't open my world. Any way to save it?
Just gets stuck on "loading terrain"
why doesnt the server hosting thing work?
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
!cracked
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Reason: appeal only with proof that you own Minecraft
Moderator: @icy estuary


squareowl [928506121013043260]
in the oceans was big stone temple what is called
Does anyone know how to bind crawling? the tutorial said you can press z to crawl but I cannot find a setting for it anywhere.
where do we find elytra's in bmc4?
been looking for end cities but only found those tower things that gave the end city achievements
I'd also like to ask if anyone knows why magma blocks no longer provide air when underwater. It's very hard to underwater cave for diamonds now.
I think it has something to do with Chipped but I can't change any settings for it
is there a map viewer or something? so i can find villages
like with the seed or somethoing
what mod is the one that gives animation when talking in chat or in inventory
@stiff stirrup !!!
please could you help me ;-;
ive tried whatever i can do and nothing seems to work
you didnt list on what you need helping with...
cant rlly help without info
Hi guys join my live to kill Valkyria
?
please stop the promoting even if it is in the discord here
ok sorry man
its ok
oh my bad
i join my world and the game keeps crashing when that happens
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
did you have a map or item that you picked up recently
ah right
gimmie ur level.dat rq
hm i see nothing wrong there
ok lets move on, mind sending ur latest.log?
!logs
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
okay sure
How do i keep goblin traders from despawning?
rename them
Thx!
np
meaning
mods
like my own mods?
yea
okie
wait is there something that doesnt belong there?
oh ok
yeah saw saturn so was confused
i see
strange
abyss is breaking?
very weird
here
#821708399712534538 report it here
oh
and hopefully y3 sees it
okay
mhm
wait how is abyss breaking tho i havent enetered that at all
wtf
bro can i like delete smth?

pretty sure you can upgrade ur bow to netherite or smt
its not letting me use chests or furneces
??
what is not letting you use chests or furnaces
yeah when i left click non happens
yeah that what i ment
right. what launcher are you using
forge
Curseforge - Refers to both the Curseforge website and Curseforge Launcher. The Curseforge Launcher is a modded launcher used to play & install modpacks. ATLauncher is a better alternative. All modded launchers can be used to install & play both Fabric and Forge modpacks.
Modpack - A collection of mods. "Better MC 1.19.2 Forge", for example, is a modpack.
Modpack Version - The version of the modpack you are playing. v5, v6, v7, etc.
Minecraft Version - The version of Minecraft which the modpack you are playing runs on. 1.16.5, 1.18.2, 1.19.2, etc.
Mod - A .jar file which modifies the game in some way. "BetterEnd", for example, is a mod.
Forge - A mod loader which allows you to use Forge mods.
Fabric - A mod loader which allows you to use Fabric mods.
like wym im using the minecraft launcher

are you using
curseforge, atlauncher, tlauncher, gdlauncher
minecraft launcher isnt a modded launcher
i told you cruse forge and you said its not a launcher
same diff
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Hello, new here. I just started a better minecraft server for my friends and I. when trying to log into the server im getting a mysmatched ore varient list error. How do i fix this
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
- No, but maybe will in the future
- Curseforge
- 1.19.2
- V20
- logging into the server
- No, just started server today and trying to make sure it works
- Need help to find that
- going to check that out now
im also using pebblehost servers
how cna i find villages easily, i fly around in creative and cant find anything
its most likely their issue
making a serverpack and attempting to join it works for me
well I asked pebble host support and they sent me to you guys
pebblehost hates us

their hardware isnt good enough to run modded and they blame us 
I suggest BisectHosting
but you can try to remove that mod from both the client and the server
I remember a report of this exact issue before 
is bisect hosting farely easy to use?
really easy to use
Im running like 6-10 servers rn and a few of them are from Bisect
great support too
im looking at it now. its way more expensive tho 😦
better hardware
keep in mind Budget & Premium have the same hardware
Budget has a few less features but its still good
hmmm
@stiff stirrup can talk more about the differences between Pebble & Bisect
huh
oh
pebblehost staff dont even have actual minecraft
jk
but like
their services are cheap
cuz 1 they wont help you or fix ur stuff it it breaks
2 its very bad servers, their nodes suck, performance is absolute mangled shit
3 they have unsecure ways to help you aka discord tickets (everything should be done securely though a website from THEM cuz that doesnt break)
its cheap cuz they are cheap
bisect is a bit more expensive cuz they are deserving of the price
I think im seeing your point lol
yep
there have been users from shockbyte
pebble
gportal
etc
they all have issues
the only problems with bisect is how to set up voice chat
Bisect has issues too, but they resolve it quickly
and thats done through their ticket staff
yes
10-20 minutes
everyone else
at least an hour
shockbyte? sometimes a week
I dont have it
It was funny though lmao
it wasnt just reported once, like a bunch of people reported it
All from Shockbyte

yerp
i have a question, i downloaded forge version of better mc, and i need to upload it through ftp on my server, but i dont know how, since i dont know if either i should have just put all files into the server before generating world, or after, moreover i thought it will be only modpack with only mods, but there is more folders there and i dont know what to do with them, should i just transfer all of this to my server ???
use the serverpack
dont use the modpack version
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
^
nps
Okay now I'm trying a server through bisect hosting and this is what showed when trying to log into the server
ur server / cleint is wrong version
make sure you are using the right version to join both
Would anyone be able to get into a call with me to help me out
Just the better mc voice chat room
friend, make sure the bisect server you have is the same version as the modpack you have right now
if it isnt
it wont work
yeah i think it loaded the fabric version when I wanted forge. one sec
yep
thats most likely why
i have one more question, that serverpack read me guide only shows how to start server on my computer, but i need to upload it on my hosting bought server and i dont know how
alright, server looks like its running again, hoever Im still getting the same error as pebblehosts server which is mismatched ore variant list
what server host are you using
!logs
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
polish one, i have ftp to it so i just need to upload files there
just normal mc hosting site
yep
are you both getting it?
upload the configs and mod folder
yeah
i didnt upload a server pack at all I just clicked the open JAR menu on the server website and chose the modpack I wanted
yeah that works too
is both you and your friend unable to join the server?
I am just me...Autumn falls is doing their own thing. we are separate
yes im aware
ok
are you asking me this?
yep
yes I am unable to connect. It comes up with the mismatched ore variant error
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
ok ill try that launcher
does anyone know why the shaders in the mod arent working
wdym not working
when im in my world the shaders arent there
show wym
its just basic vanilla
how do i do that
options -> video settings -> top right
it worked thanks for the help
nnp
its taken several hours but I have finally been able to get into my server...the ATLauncher let me on. not sure why files are different with curseforge. Now i just need to fix it to the seed I want
also How can you add other mods, and for others to join do they have to install those mods individually as well or can I download a server pack off the website to be able to send to them?
install the mods you want to add on both the server and the client
for most yes
and for not most?
some might require you to set them up but all of them go into the mods folder
ok. thank you all for your help 😄
you need the correct modloader version
yes
due to this error
java.lang.NullPointerException: Cannot read field "activeCITs" because "shcm.shsupercm.forge.citresewn.CITResewn.INSTANCE" is null
The game crashed whilst initializing game
Error: java.lang.RuntimeException: RivaTuner Statistics Server (RTSS) is not compatible with Sodium, see this issue for more details: https://github.com/CaffeineMC/sodium-fabric/issues/2048
V24 HF
😦
remove the CIT Resewn mod
close RivaTuner Statistics Server
what do you mean
i got this installed on my server
thx
thats the wrong forge installed
Manually install one if you cant install from their menu
do you know how ?
yo anyone knows how to fix this? i'm really confused
you can make a ticket on ur website and let the staff do it
in the 4th step
i need to generate a new world in v19 or the version of my old world?
is there anyway to use the essential mod with the modpack?
what are the best enchants for picaxe and all the tools and armor
v19
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
so how do I start a free server then?
read
not through lan
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
here.
thx
quick question
is it possible to get back my stuff and buildings back or nah?
yes, follow the steps please
sorry i'm just stupid
Is there a way to have more than 10 players on my server
your not stupid dont worry
Ill walk you through it if needed
go into server.properties and increase the slots
i'm just really confused on the player data part
like the world/seed part worked
ok thanks
@stiff stirrup
whats wrong?
@stiff stirrup this
im really confused sorry
the new version
not old version
yeah i got that, thanks anyway
yep
and yeah it saves all ur stuff
doing the guide fixes that issue you have
just follow it all
no but
i did spawn in the world
just like
from the beginning
without my things and home and that kinda stuff
oh wait maybe it's because im on v19.5 on fabric?
yes i did
im just really confused on the 6th step of singleplayer
If you want your old playerdata, you should be able to copy the block from your old level.dat into the new one. I haven't tested this, so your mileage may vary.
the way you got the seed
basically
!nbt
This message is for issues with an ITEM in your inventory.
- Please download NBTExplorer or some sort of NBT/DAT opener to fix your files.
https://github.com/jaquadro/NBTExplorer/releases - Find the files you need for the server or client.
For Client
- Go to your modpack folder -> saves folder -> The name of the world you chose and open that -> get level.dat and level.dat_old files and open them with NBTExplorer. OR alternatively drag and drop the files Into NBTExplorer. YOU CAN DO THIS 1 AT A TIME OR BOTH AT THE SAME TIME
- Now while you are inside, you can see a listing called Player, often 5 listings off the top, and now open that by pressing the + on the left.
- While inside Player, you can now see the Inventory option. Open it by pressing the +
- Now find the item that could be crashing. It often can be a map or item. Press the +'s 1 at a time and find the item. Once you find the item, Select it by pressing the 3 / 4 / 5 file number and, at the top, pressing the RED X.
- Now save your file with the save icon at the top left, 3rd from the left.
- Repeat step 1 to do it for level.dat or level.dat_old, as you need to do BOTH files to confirm the change.
For Server
- Open your server files, find the Usernames.json file, and open it with Notepad or whatever you wish.
- Locate the user who holds the bad item, and remember or copy down their UUID somewhere.
- Come back into the server files, go to your world, and go to the PlayerData folder.
- You can now follow steps 2–6 of the client guide, but instead of Level.dat and Level.dat_old, it will be UUID.dat and UUID.dat_old (UUID = the person's UUID that you remembered).
see how it says to REMOVE items from the inventories
just dont do that
just copy the entire inventory block and copy over to new one
k so
i dont need to "remove the item that is crashing"?
is that correct?
but if i do
how do i know which items are crashing?
yes you dont need to remove item
that is a guide for something else
i linked this cuz it explains the inventories tab
you just need that entire inventories tab pasted into level.dat and level.dat_old
you got it
so um
how do i do that?
it doesnt show a copy option as long as im aware
kay
they are both 59 entries now but the inventory compounds didnt change
is that normal?
did you do both level.dat and level.dat_old
alright
they act as checks and balacnes
if 1 has something the other doesnt they fix themselves
is the player from the old folder supposed to be like this in the new one?

💀 bruh
just
copy old level.dat and level.dat_old player tab into the new ones
and itll work
no just click the Player -> Ctrl+ C -> go to new level.dat -> Ctrl+V and replace if you can
or just
delete old player then paste
aight i think i did it
i deleted the player files and replaced them with the ones from my old world
i swear to God if it doesnt work
now i just
reboot the game?
yep
alright
does the essintials mod work with the newest version of better minecraft
alr ty
and any methods to get it to work modify the modpack in incompatible ways
weve got a world hosting solution built in
the mod is called Luna
or obv standard server hosting
surprise surprise it didnt work
do !ws :3
can you give me ur old level files and new level files rq
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
More roles will not be added since there already is 50+ roles and a total mess to work with.
sounds about right
how do i do that i forgor
its been a while
both
can i send it in your dms?
sure
im not sure if discord will let me tho
i dont have nitro
it shouldnt be that big
send here then
already sent it there
there's a chance to find them in loot chests
where do i find loot chests?
like just normal chests generated in structures?
or is there another way
generated structures
is the better mc mpd[ack compatible w/ bedrock/java crossplay servers?
its a modpack
its java only
ok
Anyone know of some good resource packs to go along with BETTERMC? Specifically ones that make the functional block UI look cool
There's some implemented already
my chests with stuff inside got deleted from the game when i loaded in
and some blocks around my house were removed
like the game didnt save properly
but the stuff in my inventory stayed the same as after i put stuff into the chest
any way to like retrieve the chests
Only way to restore is if you made a backup
What's the best weapon and armor in the game
does ftbquests have to be downloaded separately?
alright im planning on using either the Luna mod or e4mc with some friends soon, and im well aware of the risks of Essential of course, but are there any glaring issues or risks that come with Luna or e4mc that should be noted??
iirc no
not at the moment, sometimes the servers with luna get full though, if that happens, you can uninstall luna and install e4mc
hmm.. not seeing any quest books in the top left
then modpack is installed incorrectly
:-0 i just downloaded it from atlauncher like it said
should redownload it then
i will retry
Does anyone know how to fix the crafting bug on better Minecraft 🙏 I've been struggling to craft basic tools in stone and make torches
I'm on version 1.19.2
I'm in tears right now, I got jump scared so badly
ah. just got ATlauncher to use instead of prism, installed bmc for 1.20.1, and uh. There is no loading screen, or title card
ok what the hell. it fixed itself like right after i sent that
@stiff stirrup Any good with client sided multiplayer crashes
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
bit tired to fill it all out. Only occurs whenever two players are near with one another
Basically just, If I log in and travel to the other player, one of us crashes
just wanted to know if this issue has come up before
We won’t be able to really help without it. How is the server hosted?
Hellow , anyone can help me about this error?? it happen when i came inside the world , then after about 2 minutes , it crash. help me someonee
need #7
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
- no , pure from the curseforge i have download
- CurseForge
- 1.20.1
4.v.24
5.after exploring the world , like about 2 minutes and the crash happen
6.no
8.yes
@icy estuary
#faq performance guide
Can anybody help me with this issue? I'm getting this error. I didn't add any mod other than modpack itself. BMC4 1.20.1 Forge 47.2.17
add essential?
Hello, is there any easy way to play Better MC 1.20.1 with a friend? I don’t know how to host a server…
guys help, I have the serverpack but when I do sudo sh run.sh it displays an error :
Start script generated by ServerPackCreator 5.1.1.
To change the launch settings of this server, such as JVM args / flags, Minecraft version, modloader version etc., edit the variables.txt-file.
start.sh: 40: source: not found
start.sh: 93: Syntax error: redirection unexpected
Hi having issues with launching the game, game just straight up wont launch and it crashes immediately
- I have not modified the modpack in any way
- I installed it via CurseForge
- Forge-47.2.17, which I believe should be game version 1.20.1
- v24 HF
- Launching the game, nothing else
- Nope
- (attached in message)
- Yes? I tried as much as possible but i dont think i was able to select ATLauncher to use javaw.exe in the java build provided in the guide, so im not sure if it selected it properly
No
CurseForge
1.20.1
V24 HF
Just launching
No
Yes
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
!driversd
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
remove the controllable mod
ty, worked
update it from your vendors website
the minecraft crashed again , i already follow the performance guide
1.noo , i have not change anything
2.ATLauncher
3. 1.20.1
4. V24
5. when i breaking the tree with wooden axe like 4-5 tree then it crashed
6. nope
7. attached on message
8. yes
still the same after downloading the installation from the website and restarting the computer. here's the latest log
[21:39:32] [Render thread/INFO]: OpenGL debug message: id=0, source=API, type=ERROR, severity=HIGH, message='Unknown internal debug message. The NVIDIA OpenGL driver has encountered
an out of memory error. This application might
behave inconsistently and fail.
try updating your drivers
and send me a screenshot with f3 open ingame
are you on a laptop
Good morning everyone, I just started playing the Better MC forge BMC4 yesterday (game version 1.20.1, forge version 47.2.17) and i cannot seem to get villagers to breed. Is this a feature or a bug? has something changed? any help would be appreciated.
you got enough beds and crops for them to breed?
i even tested in creative with 30 beds and threw stacks of bread at them
v23?
v24
as i said. i just started yesterday. it was the newest on curseforge. i have no idea on the silk touch thing. i haven't got an enchanting setup yet.
they added this spawners+ mod instead of the spirit mod
I dunno if its the same as older ones
btw the aether is really early game friendly
I really recommend going there
got the game to launch. This surprisingly works. Thanks!
which mod is the one that makes the camera weird
like it kind of drifts
game is unplayable
does anyone know how to fix the drift aswell
I searched fps and now frame rate
I have the same issue
hello
hi
i have problem with bmc4 i cant add mine colonies mod😢
if you are modifying the modpack we cant rlly help you
just make sure you have all the right mods
have you updated drivers?
is the pack getting a new update soon?
where do i find all eys on end challenge
do i need to find all eyes to enter end?
some of them can be crafted I think
yeah few those can be crafted
there is one you get from trading
villagers?
yes
the brewing stand guys
I think its the same mod as the one in dawn craft I dont know if they changed anything or not
but some drop from mobs
and different bosses
wait it doesnt say in the quest book?
I have no Idea
I just started
I saw the aether mod was in the pack
and that's what I have been doing pretty much
Hello :D is there a way to use BetterMC with Mohist
no
plug-in and mod launchers will break the modpack
Hey, how do you open the recipe book?
Hello, how can i get whiter iron?
you could but you’d need to disable a mod and change a config
overall just rather use the jei menu
that's sad...
I don't really like playing without the recipe book 😦
guys i got two days before i cant play minecraft for another 3 months
please anything i can do to fix my world please?
.
so i just built an endermen xp farm using a 1.16.5 tutorial since thats the game version im playing but the endermen arent falling down unless i fly to the top. any idea what could be causing this?
render distance maybe
i set my vertical entity distance to max
well it’s good cuz you get no stutters inside the inventory
@stiff stirrup following the crash thing we talked about yesterday, assuming that the crash occures because of something i did in the game. Then can i delete like save files of the world or smth and then go back in time in the world? something like that?
possibly?
try this
backup ur entire world rn
all files
and delete ur entire inventory
!nbt
Oh good idea
This message is for issues with an ITEM in your inventory.
- Please download NBTExplorer or some sort of NBT/DAT opener to fix your files.
https://github.com/jaquadro/NBTExplorer/releases - Find the files you need for the server or client.
For Client
- Go to your modpack folder -> saves folder -> The name of the world you chose and open that -> get level.dat and level.dat_old files and open them with NBTExplorer. OR alternatively drag and drop the files Into NBTExplorer. YOU CAN DO THIS 1 AT A TIME OR BOTH AT THE SAME TIME
- Now while you are inside, you can see a listing called Player, often 5 listings off the top, and now open that by pressing the + on the left.
- While inside Player, you can now see the Inventory option. Open it by pressing the +
- Now find the item that could be crashing. It often can be a map or item. Press the +'s 1 at a time and find the item. Once you find the item, Select it by pressing the 3 / 4 / 5 file number and, at the top, pressing the RED X.
- Now save your file with the save icon at the top left, 3rd from the left.
- Repeat step 1 to do it for level.dat or level.dat_old, as you need to do BOTH files to confirm the change.
For Server
- Open your server files, find the Usernames.json file, and open it with Notepad or whatever you wish.
- Locate the user who holds the bad item, and remember or copy down their UUID somewhere.
- Come back into the server files, go to your world, and go to the PlayerData folder.
- You can now follow steps 2–6 of the client guide, but instead of Level.dat and Level.dat_old, it will be UUID.dat and UUID.dat_old (UUID = the person's UUID that you remembered).
yeah i have a copy of that world

Why is the end not spawning the dragon or any structures?
Already tried resetting the server end file
But we went on a singleplayer mode and it spawned him and the structure
you could try to transfer ur single player end to the one that doesn’t work
no
it can be played multiplayer
im not too sure about why the end is breaking on you but thats not supposed to be that way afaik
i have a question is it normal that the texture packs of the chest changed?
christmas?
oh
hello again. FOr some reason Better minecraft 1.19.2 has just stopped wanting to load through the ATLauncher..I was on it for a couple hours this morning and it was fine, then came back and tried to load it and its not loading, my friend is having the same issue
thats why they look like presents
no problem
has anyone had this issue?
idk and also probably most of the people plat better minecraft 1.20
by now
itll be hard to find anoter one who plays on 1.19
what launcher
GUYS
ITW S
IT WAS THE STAY TRUE RESOURCE PACK ALL ALONG
IM FREE FROM THIS TORMENT
MY BLOCKS SHINE!!!
Hi guys I play with my boyfriend and my girlfriend on my own server. Better MC - BMC4 - 1.20.1 FORGE. We all have long annoying names and want to display our real names.
We 3 ask you all for help 🙂
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
Reason: appeal only with proof that you own Minecraft
Moderator: @icy estuary


aronrss [913432516306804796]
Hi guys I play with my friend and my girlfriend on own server. Better MC - BMC4 - 1.20.1 FORGE. We all have long annoying names and want to display our real names.
We 3 ask you all for help 🙂
hey there can anyone recommend a good seed for me something with a lot of structures nearby i play on 1.19.2 forge
@stiff stirrup How do I update this driver?
yes , i already update the drivers
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
hmm follow the performance guide 100%
!performance
Which one?
laptop?
Yes, Windows 10
How
^
that
so GPU 0 or 1?
How do I find this out?
Howdy are there public servers?
there are not
well not offical but public maybe
sad
could someone help me figure out a crash report?
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
anyone know how to fix this villager texture?
!reload
To reload textures and sounds, press F3 + T. If this doesn't bring up a loading screen, do the following:
1. Press escape and go to the Resourcepacks tab.
2. Move a Resourcepack on the left of the screen to the right.
3. Move that SAME Resourcepack back to the left.
4. Exit the menu.
If step 4 does not bring up a loading screen, do step 2, then step 4, then step 3, and then step 4 again.
1: yes, added about 37 mods, most shouldnt cause issues
2: curseforge
3: 1.20.1
4: V24 HF
5: launching the game
6: yes before i added epic fight
7: crash report attached
@stiff stirrup

37 mods
yes
it will 100% cause issues
remove epic fight
and give the mods you did add
i see so many issues
mekanism and ae2 dont work together as mekanism has code that makes itself explode if it comes into contact with ae2
Did you add resource packs
Not the crash, the villager texture hes talking about
okies i removed ae2
oops wrong person lol
im the wrong person
yeah lol
if you added a resource pack that changes any of the assets for villagers it causes that
Notable being Reimagined

i think?


