#better-mc-forge
1 messages · Page 161 of 1
what launcher
ATLauncher
I allocated like 8 GB of ram if that's the issue but I bout it since I went over that and was fine
"Share Location in Chat" in nether seems to crash the client
creating a waypoint and sharing that instead seems to work fine
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
i think its this one i have no idea where ATLauncher put the new instances or replaced the one I downloaded from curseforge
- Have not modified
- ATLauncher (previously curseforge)
- 1.19.2
- v19
- Disconnect from the wifi (yes, this happened because I disconnected)
- Will forever be stuck at loading terrain
- latest log up there idk
- Yes
Does this pack have a mod for claiming areas?
As well as commands like setting homes?
Depends on the modpack 😄
there are 4 different better mc versions
the newer ones have Open Parties and Claims, which should allow you to claim via the map
Better MC Forge 4
Can we add baby wolf and silver fish to the "small animal" config for the cages lol?
we as in luna devs
yeah, that has open parties and claims, so just open the map and try rightclicking to claim
i finally got the driver update, it worked
what y level for diamonds?
hi, i havent updated better mc in a while and i tried updating it and it crashed? on atlauncher
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Back a again it still wont work
Hi im new here, i try to make a server with mods but when try to ejecute the start.ps1 with powershell, it close
!windows11
An update to windows introduced a new security feature that prevents powershell files from running on your PC. This is great for your security, but not so great for our server start scripts, which require powershell to run them. Fortunately there is a quick fix for this!
Run powershell as administrator, then run Set-ExecutionPolicy RemoteSigned. Read the prompt and press accept. This will allow us to run scripts.
Next, navigate to your server directory using cd path/to/directory (for example: cd C:\Users\Username\Documents\Minecraft\Server)
You can now run the server by double-clicking the start.ps1 file, or typing .\start.ps1 into the command line while in the directory.
IF THE ABOVE DOES NOT WORK, TRY THIS
Run the command Unblock-File -Path .\start.ps1 in the same powershell window. This will allow the start script to not be blocked by windows, and run freely.
If all else fails, a manual installation should work:
FORGE 1.16.5: https://www.youtube.com/watch?v=bIjisWyxU-8
FORGE 1.18.2: https://www.youtube.com/watch?v=R610M102X0U
FORGE 1.19.2: https://www.youtube.com/watch?v=3HD0ibIpO-A
FABRIC: https://www.youtube.com/watch?v=b2W1Xb7nLKo
Make sure to Install the Server in our ServerPacks so it can use the correct files.
(its also for windows 10)
oki, thanks you so much <3
its still saying loading terrain after doing all that
hi, i havent updated better mc in a while and i tried updating it and it crashed? on atlauncher. I updated it to like the second newest version first (cuz i was confused on which was the newest v19 or v20 even tho it showed v19 first), then it crashed, then i updated it again to the newest version and crashed again. im playing on atlauncher 1.20 trying to update to the newest. Launching the game crashed when its on the loading screen.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
i have atl launcher already
Did you maybe mix up forge and fabric? I find hints that show that you have fabric mods, but the loader you have is forge 🤔
Which shouldnt even be possible if you really used ATLauncher, how weird
can i delete and reinstall my mods or would that make me lose my data
keep a backup of your worlds folder and reinstall
dont need to, mods are always available for new download 😛
okay
i have my world backup copied in another folder
so thennnn what do i do again sorry i forogt
reinstall my mods
?
And i do believe ATLauncher keeps mods it downloads in ATLauncher\downloads

First i would just go and delete the mods folder
then in ATLauncher click "Edit Instance" -> Reinstall
okay
And then we hope it works and my job here is done
wheres the go down button!?
some of my packs dont have it
i cant move up or down
its not layered properly i gotta fix that

Can people stop doing weird shit please? 
Makes helping so much harder
Sorry, i have no idea, first time ive seen this
welcome to my life for the past year lol
i swear sir! i didn't do anything!!
Damn you qwek
nooooo i lost my backpack from travelers backpack mod that i added into the modpack
😭
it was an enderdragon backpack that gave me abilities and i needed an ender egg to craft it..
i cant get it again

plus i had valueable stuff in it
i uh keep getting random crashes after playiong for an extended period of time
one crash report says insufficent memory?

well, you did backup the world, right?
i did everything is fine
but my world didnt delete
or anything so i didnt do anything
yeah, but you could add travelers backpack again and just copy the back up if the backpack is truly gone 😛
How much memory did you give the game?
okay i will try that
oh ig i backed up after i updated

ig its lost
ive given it so far 8gb then tried the 6gb now ive cranked it up to 16gb but it all just keeps crashing
ive updated drivers and java
my pcs pretty high spec so its baffling lmao
but didnt it crash on every start? so the player save should still be before update
that happened before and after i updated it
should i try adjusting the xms?
not after when i fix the mods
8gb should be enough
Even i am running it with 8gb, and i have crazy shaders and 16 render distance 😄
yeah its confusing
What's jei?
too much ram causes problems
Just enough items, its a mod that shows you all items/blocks on the right side when you are in your inventory
heres my crash log
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
ive updated everything its baffling
this is the crash log for 8gb ill see if it happens again with more allocated
laptop or desktop
desktop
ryzen 5 3600
RTX 3070
16gb ram
1tb ssd with windows freshly installed recently
Did you check how much memory you got available on your computer while playing?
is ur display connected to the 3070 and not motherboard?
Yea 3600 doesnt have an igpu
ok that’s good

idk why it’s giving you driver issues tho
it's weird lmao ive played better mc before never had a problemo
curseforge
where did you go to allocate more ram?
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
try this
it very well could be, give atlauncher a shot
Who do I ping for this
gimme a bit
is the mod supposed to reset if i install it?
cuz it did ithink
i think it does this everytime theres a new update
it shouldn't it's through CF's settings for the game itself, not hte modpacks
wouldn't hurt to check, but you'll have less problems with atlauncher anways
Its not, but maybe you really had fabric before and thats why its all weird?
i have atl rn
i never had fabric before
maybe i accidentally downloaded fabric mods
Maybe
what does this do?
gives illusioner ability when you hold in off-hand and reach half-health
what ability does it have
you fought an illusioner to get that, so you'd probably know what it does
it also creates a ton of copies of itself lmao
ah
illusioner
i find it funny that due to memeory leaks im using like none of my ram cause 10000M is the max 😭
for what launcher?
it's not the max but if i go in with more than 10000M the game yells at me
also i dont use a launchers stuff i put in my own args
ah
like when you open ur game it says reccommended and stuff
those you can just ignore

yeah but it does kinda help my fps when i put it at the recommended
cause minecraft is porely optimized for high ram so it just guzzles it for no reason 💀
@stiff stirrup still crashes unfortunately
mind giving the log?
latest.log?
yep
ignore the spectator was trying to figure out myself why it keeps crashing it appears to be intereractions or movement?

that shouldnt be crashing you
game works
where would they be located may i inquire?
!logs
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.
nope only that one i sent just then
got the previous log here too from when i was adjusting afterburner
but no crash log
hm
overclocking?
yeah nothing past what i usually use
but the previous crashes had no correlation since it wasnt enabled
game freeze then just closes
maybe i should oc my cpu to 5ghz again
poor guy was stuck at that for months

cuz i was too lazy to disable it
- Download an adoptium release for Java (recommended but not required):
- Java 11 (https://adoptium.net/temurin/releases/?version=11) for versions 1.16.5 and below (can also use 8 if its not working)
- Java 18 (https://adoptium.net/temurin/releases/?version=18) for any versions newer (or 17 if 18 doesn't work)
- Consider installing the JRE instead of the JDK for a smaller file size
-
When installing through adoptium, make sure that Add to PATH and Set JAVA_HOME variable are both set to be installed (please see https://imgur.com/a/jPu1h7h for how that would look)
-
Check if java has been correctly installed by running java --version (or java -version on older versions), and seeing if the output is correct (see https://imgur.com/a/OWcoq4p for an example of the output)
- NOTE: 64 bit versions of java ALWAYS have '64-bit Server VM' in the version output. If that is not there, you have installed a 32-BIT version!! If you're getting Out of Memory errors or any other errors, PLEASE install 64-bit
- If the output isn't as intended, you have 2 options.
i) Delete ALL other java versions from your PC (ONLY recommended if you don't need them)
ii) Redirect your launcher/server to use your new installation of Java
Method i
- Uninstall any other java program listed in your programs list (differs by OS, please find a guide for your own OS if you don't know)
- Attempt to re-use the command mentioned above (if the output is now correct, which it should be, you are ready to go)
Method ii
- For a server, please modify the $Java/JAVA variable (found in your startup script depending on ps1/sh) to the path of your java installation. For windows, this path is usually found in "Program Files/Eclipse Adoptium/version_of_java/bin"
- For a client, depending on whether you use CurseForge, GD, or AT, the process is slightly different. Please see a guide for each respective launcher on how to change the java version.
might work
i had unfortunately it made no difference
already tried?
yeah i tried all normal troubleshooting steps
discord was my last resort lmao
could it be my world file?
it was generated today however my other world didnt crash when i played it for around 15 minutes
mind if i send you my world file?
sure
so far so good no crashes
very nice
ive worked on computers for a while
never did i think minecraft (world) could bring a pc to its knees
now i face the moral issue is it okay to give my diamonds back
it happens
yeah it hasnt crashed when it would have by now it was the world
dammnit it i liked that seed :wah:
I started a world with the better Minecraft 1.20.1 versions like a month ago, and it never has given me problems until now now. Now every time I try to open the world, my game freezes. Wa happen
@stiff stirrup [00:15:51] [Thread-79/INFO]: OpenGL debug message: id=1285, source=API, type=ERROR, severity=HIGH, message='GL_OUT_OF_MEMORY error generated. Failed to allocate memory for buffer data.'
[00:15:51] [Thread-79/INFO]: OpenGL debug message: id=1281, source=API, type=ERROR, severity=HIGH, message='GL_INVALID_VALUE error generated. Invalid size and/or offsets.'
[00:15:51] [Thread-79/INFO]: OpenGL debug message: id=1281, source=API, type=ERROR, severity=HIGH, message='GL_INVALID_VALUE error generated. Invalid size and/or offsets.'
i take it this means my allocated wasnt enough
yeah kinda
opengl is mainly cpu stuff 
i had 8gb allocated hmmm
the urge to shut down my server and yoink the other 16gb right now
:waa:
shoot
can you open game, go inside, press f3 and screenshot?
very pog
sure gimme a sec
lmao
i usually have 20 set but lowered it to 10 since modpack issues
yeah better exept that random crash and my 10 mins lost progress
which mod makes all villagers able to get mending and stuff
idk
thats default minecraft
in 1.20 they made it to where only certain biome villagers be able to get certain books?
yeah latest nvidia bios revision windows update etc
you have to enable that as a datapack
its not enabled in vanilla automatically
how about cpu updates?
i dont believe they do those, except bios
amd does i suppose
let me check
yeah it does it through bios
i got confused it is being changed in next update
fair enough
thought it was in 1.20.1
bmc4 is 1.20.1
it wasnt enabled it's an optional thing if you wanna make mc harder (villager trades)
Oh okay
is there a better place? Im a little lost it seems
or just not the disc
if you want to go and advertise other servers will have to work
all good sorry bout that
gotcha
this is my first time using a server i just switched to pc but i cant add my server it says cant connect to host unknown server. anyone have any advice
how can i join my friend on minecraft forge, it wont let him connect to LAN
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
do note atm world sharing is full
but if they are in the vacinity of ur home wifi or just living with you
what does that mean
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
read it
yeah they are bro
do the server files one than
install BMC (which ever one ur running) server files
than extract, open folder, open start.ps1
run command prompt and do ipconfig and get the ipv4 address
and they can join
can anyone help
please say WHAT you need help with and not just "help please"
🙂
okay thank you so much, i'll try that
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
follow either guide
yo tamz
whats up
this video only shows it for the older versions
its not showing it for 1.20.1 which is the current one, should i just follow it anyway?
its the same thing old or new
ohh ok

thank you
wait bro
i figured out how to run the server on my computer
but how do I load up a previous world on it?
from single player just transfer world into the server files and rename the folder to world
@rugged urchin
aight bruh, thanks!
i need help

how to remove this
read what i just pinged you in.
press i
o
if you just sent that image with that context
it wouldve been solved in 1 message 🙂
lol
ok thanks
makes life easier
yep
its best to say. "Hey i need help, the thing i need help with is this right here..........."
and we can give answers super fast
if its just "i need help" we are like "oh what do you need help with" bla bla bla
ok thx
Keep getting an error stating i have the wrong version when trying to host a lan server
whats the mod BMC4 uses for the optifine like zooming?
Rubbedum extras iirc
Or however you spell the sodium port
Mousing over the keybind should show you the mod source
i need help i cant hit mobs better mc plus
Anyone had any luck finding trail ruins in BMC4?
I've gone through many stacks of fireworks and subjected our server to great chunk-loading torment to find one and have had no luck
Or if anyone knows of other structures I can get the trail ruins trims from, if I can also look for those too
Hey, I've build this Enderman farm, but when I stand in it (bottom), the Enderman wont spawn/get angry at the endermit. But when I fly up a bit, they will start spawning/getting angry. I've already disabled entity culling and increase the vertical entity distance to 52 blocks. The hight differnce betwenn me and and the platform is 41 Blocks. I got the farm from varoius YT videos, where it does work. Also the enderman drop with half a heart left, so the hight should be correct
is this pack not compattable with the essentials mod
Essentials causes world corruption
self-hosting is free
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
what pack
Better MC on 1.18.2
its prob a mod you added or you built the farm wrong then
so the game said better mc had a update, so i updated but now i cant see any servers i was on better mc bmc4, on the apollo server.. anyone know how i messed up?
If you updated with curseforge, maybe you ticked the checkbox that makes it update it to a new profile?
each profile should have its own saved servers 🤔
is there any way to fix?
just update again? or just add the server again?
ill try that thanks
bmc plus is very very old not rlly support for it anymore
lol
Hey, a friend get always Exit Code 1 when he wanna start the BMC 4 Modpack 😦 can someone help him?
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
- No
- Cursefore
- 1.20.1
- v6
- Launch the Game
- No
- Must ask him for the data
8.hes not here so idk
v6 is outdated. Please update
downgrading will not help with fixing the issue
please send #7 and we can go from there
and use latest
you can give us the logs on why he doesn’t launch and we can help
context of this
hes the friend 😄
oh ok
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
yep
!help
🚫 josef1806, that command is disabled in this channel.
?
(BMC4) My waypoints are showing in all dimensions, and I can't find a way to set them as dimension specific?
Are all the BMC1-4 all the same except later versions of minecraft? or are there significant differences?
kinda
some have diff content/ mods from others
check #faq for better answers
anyone now why the camouflage of the elevator mod dont work? Im at version 19
do these random floating islands have treasure on top of them or r they just simply there
Ahhhhh I see, which version would you recommend?
better mc go crashh
How do I open the backpack when it's on my back?
flip a coin :3
i like bmc4 forge
Fair enough xD Thanks!
how do i place blocks in vivecraft for this list, or is it incompatible when using a quest 2? there's no binding to place blocks, and pressing a does nothing even while swinging.
on Metter MC Forge 4 if that helps
I dont know about that although if your using quest controllers and not just seated mode then it most likely wont be possible since of all the keybinds there are
Just thought I'd ask again if anyone could point me in the right direction for this issue or just a solution haha, hopefully I'm not being annoying mentioning this again.
so i just objectively can't use vivecraft until i buy a vive?
no, you could technicly use it its just that it wouldnt probbably work with quest controllers since it would way more buttons then the quest has
no
you dont need to buy a vive
so unless if you have a mini keyboard controller it probbly wont work
you dont, I dont even think theres even a vr headset that would have the ammount of buttons for something like bmc
facts
man I legit need help over on the fabric support lmao
i use virtual desktop
thats ur issue most likely
and it automatically opens steamvr whenever i open a vr application
try just following the guide and seeing if it works or not
ok
imagine getting bmc running on qc somehow
if i can just place blocks i'll be happy
Hello , sorry if i bother i m trying to play with friends on the modpack but when i connect on the server it draw this error : internal exception : io.netty.handler.codec.decoderexception no map decoration type
Does somoene know how to fix it ?
doesn't work.
is there a vr controller set that this list works with?
no how would you fit like 50 buttons onto a vr controller
with all due respect
why add vr support then
because that would be hard
that would be like 200 mods to take account for
but it's already in the modlist...
yeah to just run it prob
but I dont think when they added it that it was intended to be used with controllers rather with it just being in there but using a keyboard and sitting in a chair
omg
am i just dumb
is that why it says vr and controller support in the same line
'cuz you're supposed to use a controller controller with the list

can somoene help please ?
How do I open the backpack when it's on my back?
press b
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
- No
- Curseorge
- 1.20.1
- v15
- Try to connect a server
6.No - sending it
8 No, but it works in solo
Why doesn’t my creeper farm work? Better mc 1
most likely because of doespotatotick
blacklist creepe in doespotatotick config
Changed it already
Didn’t do anything
The creeper spawn but only fall down after I go down there
go down where 
- Locate the requested file
- Upload to https://mclo.gs/ and save
- Copy and paste the link here
Easily paste your Minecraft logs to share and analyse them.
I also add cats to the white list to see if that would change it but nothing happens
it says that i cant save cuz there is no content argument (i paste all the file in it )
any tips on how to get soul stone to summon wither?
i have been soaring around in the soul sand valley getting crazy on soul sand, soul soil n shit
yes
You can use soul sand
really?
To summon the wither
Yeah I’ve done three times
Wait which better mc are you playing?
send a ss
bmc4 1.20.1
it may work, i must admit i have not tried
send a ss please
this is what my quest says
This mod is literally 10x better than normal minecraft
it do not work , is there an other solution to transmit it?
no clue
Ill check it when im back on my pc
modpack :3
thanks dont hesitate to @ me so i can see response
@stiff stirrup
yes
can you see it or no
that explains it
i can just copy the part with error if you want
oh
i see
this bitch
io.netty.handler.codec.DecoderException: java.lang.NullPointerException: No map decoration type with id: supplementaries:death_marker
yes this is it
[18:56:14] [Netty Client IO #22/ERROR]: The Waystone storage is null. This is likely caused by a crash.
[18:56:14] [Netty Client IO #22/INFO]: ClientDisconnectedEvent done```

how you delete your world & restart??
Yea

I didn’t have the issue
delete the world folder
It was someone else
I think it s an auto disconect from the server after the error
But can you help me fix with is wrong with my creeper farm
kinda
is there anything i can do to avoid this internal error?
desktop
did you do ur drivers update?
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
also take a screenshot with the f3 menu open in game for me :3
in a solo game ?
yep the problem only spawn when i try to conenct the server
it tells me i dont have perms to delete the world folder
but no error appears in my server side
close the server
thanks bro
mysticals errors are the better
lmao
Trying to use the command /gamemode and its not letting me im the host
op yourself from the console
/op username
goats
I am trying to run BetterMC for the first time and am running into crash issues. can i get help here?
i had an graphic update but did not change anything
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Question: Why doesn’t my creeper farm work? Better mc 1
darn
You dont have to repeat your question multiple times
And esp not like 3 times in an hour
thanks for trying at leasst

wither with soul sand not working so any idea how to get soul stone now then?
or anyone know what i am doing wrong if anything else
break the snow under
Mb i thought no one saw it
Btw thx for the help he can play it now was the grafic diver ❤️
- have not modified modpack 2. using curseForge 3. not sure 4. using v19 5. crashing on launch, wont even open the window. 6. have not gotten past launch 7. couldnt find crash report, heres my latest
and i just tried ATLauncher. didnt work
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
aye
drivers are up to date
update it directly from your vendors website
installed drivers from nvidia and restarted pc. got same error.
@icy estuary
what os
windows 11
For users who are experiencing issues with the built-in GLFW, there's a quick and easy solution for you to use the latest, bug-free GLFW that can remedy the solution.
- Download a pre-built GLFW library from my repository at https://github.com/Frontear/glfw/releases. Ensure you download the correct file from the desription of the release. You may also compile it yourself, details can be found here: https://www.glfw.org/docs/latest/compile.html
- Save the file in a location you can remember and will NOT delete (the file MUST stay there or else it will stop working)
- In your launcher, go to the java parameters (this is the place you put your GC arguments), and add
-Dorg.lwjgl.glfw.libname="path/to/the/file". If, for example, you downloaded the file in your Downloads (C:\Users\Me\Downloads\glfw3.dll, then your argument would be-Dorg.lwjgl.glfw.libname="C:\Users\Me\Downloads\glfw3.dll")
Hey! I've got a little question. Are there any chunk loaders built into the modpack? I could build a normal minecraft one, but if there is a modded one, it would be amazing.
you can use the map to forceload
How does that work? Is it with the ftb claims?
So basically just
- open map
- select chunks
- select the option to claim
And then they're loaded?
nvm found it

hello

I don't know, perhaps someone else
Ok thanks.
tried it, thats not working either
Hi! Good morning! I have an issue hope you can help me
My screen looks like that since this morning and I don't know how to fix it. Can someone help me?
hi, how do i get the beginner books for each modpack? Like the tutorial book or smth like that
press i
Thank you so much!!!
Is there an easier way to get ghast tears in this modpack
Stalwart dungeons don't give enough
New af to the game, anyone wanna help, beat a few thigh light bosses, now trying to figure out what to do
Get ultimate netherrite armor
is it possible for creative mode on the schematic cannon? like it just builds it without the blocks
how do i obtain propelcane
create is not in the modpack
Do netherite bows instant kill I was shot in the back by my friend with blazerite gear with all protection IV 💀
Hey guys i need help, im using the better mc modpack rn but my waypoints arent working its jus saying the command might be incorrect or incomplete? is there smt im doing wrong or?
you need cheats to tp to waypoints
/locate
its red
you need op
Can someone explain the party mods on this mod pack
It’s very confusing that the open parties commands do not sync with the teams which I assume are from FTB
So having multiple teams and parties on multiple mods is hell
i caved @stiff stirrup
hm?
the last variable
did you buy more ram? lol
i went from 16gb to 32gb
may i ask if setting more than 8gb is it okay to do with better mc
yoinke d8gb from my server then bought 8gb more
set to 12gb anymore is kinda too much
set to 12gb anymore is kinda too much
i see
8gb is plenty no?
i don’t go above that unless game has 400+ mods
interesting
Im running Prominence with 8gb 
madlad
completely smooth 
although the ram upgrade forced me to clean my pc
a task i have been putting off for around 7 months
were you having performance issues prior to buying more ram?
but it was behind my waterwooling
:wah:
yeah kept getting random crashes (smething i never had before)
thought id eliminate the last variable before i decide its not me lmao
Yo can help me fix my creeper farm? I changed potato tick already and it’s better mc 1
If so thank you
where is ender dragon i reset this twice (1.19.2 and v19)
Is there an update coming? I keep crashing and my fences went missing 😦
My chickens escaped 😭
nvm i did it
just place bedrock and then end crystals whatever
and then the castle will spawn
for those that want answers in the future
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
is vanilla chunk loading hte only chunk loader?
there should be a ftb chunk loader
fences that were diagnol will go missing
team said there wasn't is he acoustic?
he's dumb
dont say that
uhh is does claiming chunk load?
BMC4 has open parties and claims
yes
you have to chunk load separately
is it in the m map?
how do i increase the max
also dont call anyone that word please
no command? caus ethat's how it is in the other ftb loaders?
Config
not command
if you're an admin, press ' by default
' for me opens a config menu
you can give bonus forcechunks
so yeah ' works
nice
si there a way to let things grow all seasons?
i know rlcraft had greenhouse glass
what does higher quality platters do?
Ive been playing bmc for a while but i still dont know how to tame or grow an aether dragon. Can someone send me a tut vid, i cant seem to find one.
hey can anyone help me, my friend is trying to play the modpack but it keeps crashing on launch for them
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
here let me test first if it's one of the mods I added
list the mods
wait how many mods does the base modpack have

I know I added enhanced celestials and alex's caves
most likely alexs caves
mod pack works for me though
and some other friends
but there's 1 specific friend where it won't work for them
what launcher are they using
not sure
same with a couple other friends of mine where it works fine for them
To better assist with fixing an issue, we will need some logs: Curseforge/GDLauncher-> Right click the modpack instance -> Open Folder. For MultiMC -> Click 'Instance Folder' on the right.
Find the file 'Latest' in the 'Logs' folder. If there is a folder called 'Crash Reports' then find the newest file from today. Upload these as requested.

You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as an external one. You probably want GPU 1 (which is usually the external), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
How grow aether dragon
best armor in bmc4?
does anyone know why my nether waypoints are showing up in the overworld and vice versa?
when I teleport to a nether waypoint, it goes to the overworld location instead of the nether
anyone know why once i died i no longer can use the inventory full crafting table
is there a mod that can prevent the levitation effect like potion i'd have to drink multiple milk a lot which is annoying
i need to fight off shulkers but they're so annoying
Anyone else unable to use LBPR Photo Realism or Misa's Realistic Resource for any BMC modpack? Heck, any other pack doesn't work either. Just using the given ones upon install only works.
Ofc, this is with allocating the required RAM + not altering/adding the mods themselves.
are there any mods on 1.20.1 that add a tpa command
shift maybe?
Wardens drop echo shards right
Not as I know. You need to find them in Ancient city chests
or get lucky and find the echo shard geode
Hi, I'm not sure why my game keeps crashing when loading the game. it was working fine, but all of a sudden it crashed after I added a new mod to my server and client. I retraced my steps and deleted the mod from both client and server, but it's still crashing.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
wrong channel, but that enchant doesn't have a higher level and also can't go on anything else but the weapon it comes on
oh hmm 
mc dungeons weapons is a fabric mod and is in prominence fabric and medieval minecraft fabric, it is not in better mc forge
you should be in the channel of the modpack you are playing
then you added dungeons gear mod as that is not in bmc4
it's uhh
EndlessBiomes
https://www.curseforge.com/minecraft/modpacks/better-mc-forge-bmc4
this modpack, right?
unless i downloaded something wrong
that's weird that another mod would name an enchant the exact same name as one that's arguably more famous
oh they definitely copied that enchant from mc dungeons game
same as the dungeons gear and mc dungeons fabric mods
i think so
guessing it can't be combined if you can't combine it then
yeah, again, comes on the weapon that it's supposed to come on which would be starless night, if they copied that as well
Is ignis armor better than ultimerite for combat
anyone wanna play a new world
So I have a question is there a way for me to host a server on my computer to play with just me and my wife without having to pay for a server?
If not I am fine to just get one.
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
both paid & free method ^^
@icy estuary thank you sorry I should have looked there

Hey guys ion wanna keep asking for help here, so is there like some sort of wiki for better mc? cos idk what half these things are rn
js the questbook #faq
and how do i use my gloves i found? ion think the questbook is telling me
read please
Where they able to return the recipe book
Ok
bro i rarely found a good dungeon out in the overworld, how can i find more dungeons
how you get that
villagers
so what does Endorium, Hearth & Home, and Configured Defaults add exactly for this modpack in particular?
from what I could see the latter only is for configs and the middle are some more building blocks, but is endorium something which affects generation?
or a better question, what are the config changes made in v20 that I could manually port over without wiping my current configs in general
check the modpages
i've done that, but mainly I want to see if anything wouild cause a chunk border + if any of the config changes done in v20 I could manually port over so I don't lose all my config modifications
You will always be able to bring your world over safely, meaning no data loss unless otherwise specified
I don’t think any config changes were made in the new version, however you could just bring the configs that you made changes to
i'm pretty sure at least configured defaults would ruin some configs
with personal options set
Hi guys! I am playing BetterMC on lan, but when i join to the world first time i havent the books
Any ideas? Im playing on 1.20.1
Lan breaks modded instances
We dont offer support for it
Ohhh if i made a lan server it doesnt work?
how do I turn shaders on ?
video settings top right enable it
with the serverpack?
tyy
yes with the server pack
best bet is either bisect or essential
anyway if any one wants to play for a couple hours hit my dm imma be setting things up really want to make friends and play some mc with them frequently
check the questbook from your inventory
you get the books from quests
Do not encourage the use of Essentials please
i havent the books when i join to the server
It causes world corruption in modded instances
I didn't know that
Dont understand if im honest, im new on minecraft
ohhh i see the book on the left top when i open my inventory
finish the tutorial in there and you'll end up with the other books
thanks a lot
There’s also like weird villagers that will give you a blue book
There’s instructions to two new dimension and a special flint steel for 8 emerald
There’s so many cool things idk where to even start
hi,anyone can help me?my friend and me want to play steampunk with lan,it's possible?
This is the BetterMC, but no it is not possible to play with Lan as it breaks modded instances. What you could do is run a server with the serverpack for free
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
https://github.com/LunaPixelStudios/Better-MC/commit/83398d2cc753c05636549539e1e0c76b3603cdfe?diff=unified#diff-65ad45d2075893343cf06aa2eb4fa001293c112f9d0ec3a705ef6021a0eb36de This is the commit done for bmc4 forge that changes the configs right?
because nothing in this is listed as a file modification
also downloading v20 in another instance doesn't seem to show any difference in config settings either?
like for example there is a bunch of deep aether changes in the changelog but I can't seem to find the differences file side
What are some differences between the fabric and forge version? Wich one's better for low end pc's?
Please read #faq to see the modpack diferences.
Any way to quickly launch a server for this modpack in a docker container? I want to test some things out on a server.
Hello, is there anyone in particular I should ask about crashing with this mod pack?
Lolol I should learn to read names.
unsure if this would require help from a dev or not
It should be
!moreinfo
Hello! For us to help you with your issue, you will need to answer all 8 questions below. Post the answers in this channel:
1. Have you modified the modpack in any way? If so, what did you do? (Updating/adding/removing mods, changing configs)
2. What launcher, or program, are you using to launch the game? (CurseForge, ATLauncher, etc)
3. What Minecraft version are you playing? (1.18.2, 1.16.5, 1.19.2)
4. What version of the modpack are you playing? (v11, v9, etc)
5. What steps are necessary to reproduce the crash? (Launching the game, exploring the world, etc)
6. Have you ever gotten past the point where the crash happens?
7. Send the crash report file into this channel. Right click the modpack, Open Folder, and navigate to the Crash Reports folder. Drag the newest one here. If there is no crash reports folder, do the same thing with the latest.log file in the logs folder.
8. Did you follow the Performance guide linked in #faq?
Bot already said that & I still don't know wich is better for low end pc's
hm, wonder where this part of the changelog is occurring then
both are optimized, follow the performance guide in #faq
- Yes, mod was added after the crashing and has been removed.
2.Curseforge - 1.19.2
- v19
- Going near any placed item from these modpacks causes the player to crash.
- We have got past the crash by not using items from Aether redux mod.
- Crash report attached.
- Yes.
bot is dumb
dont trust
k I think ill stick with fabric, I need performence for my friend. I have a 3080 🙂
unless this is like, updates to the mods themselves?
wait nope yep it is actually in fact updates to the mods themselves
from the latest update of deep aether
same changelog mention lol
which of the 3 default shaders with the bettermc is the best for mid end?
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The "Essential" mod is therefore incompatible.
To share your world using our own world hosting, click the "Open to Lan" or "Share World" button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
complementary is good
lol
nicole didnt read its oki lol
ty
why the flip is Nicole in bmc channel
yea but they're using essential
lol
i just warn them before their world gets corrupted
top or bottom one
ah
i get pinged by some words
ahh
what does a world getting corrupted exactly mean if you dont mind me asking
euphoria is fine, it just adds more features. if you have performance issues just decrease the preset to a lower setting
remove essettials for more fps :3
chunks will just have invalid data and not load correctly
leading to crashs
either funny things happen in your world like missing items / chunks or your whole world no worky
but complementary is really well optimized
its only because i wont use bisect to lag like crazy (not a server issue i just have bad wifi)
how comes essentials do that? does it mess with data that much?
Our modpacks don't support essential, please use e4mc instead or host a local server using the serverpack.
the way it hosts servers
alright thank you
use the serverpack, better connection then Essentials
!server
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go to https://www.bisecthosting.com/LunaPixel and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method: (This is hosting on your own PC, which is harder to do so we suggest getting a server via Bisect Hosting)
- Download the serverpack from Curseforge's website
- Right click the start.ps1 file and click Run with Powershell
To join your own server, typelocalhostinto Direct Connect.
This video explains the process https://www.youtube.com/watch?v=wuGUbVbLsDc
The server IP address is your Public IP Address, which can be found by googling my ip address
If other players are unable to join, find a portforwarding guide online.
the mod itself has a ton of memory leaks + people have been reporting here that their world gets corrupted for ages
oki ty
@icy estuary has a tons of screenshots lmao
aight thanks for clearing it up had no idea
there's just no reason to use essential as we now have the free world sharing
that makes sense, ill look into it i just dont wanna lag to play with my friend
Hopefully this is enough info to get some help, we managed to rid of the offending item that were causing the crash when we got too close to it with the fill command but that doesn't really fix the issue of not being use these items from those mods.
btw as a heads up carry on's latest version has a bug with running more recent versions of forge (or neoforge in general), would require a jar file edit either prepackaged or told to players.
for any future update attempt of mods for ref
Expected Behavior Expecting this to work with Forge 47.1.79, specifically the version that NeoForged reports itself as. ^ Discord Contact: paint_ninja @ https://discord.gg/neoforged There is curren...
also am I able to disable the mod luna without issue?
basically want to hide the "update your pack" notif
Can I find a somewhat detailed to-do list for better mc somewhere? There are so many craftable items and things to do that, with my disabilities, I get overwhelmed quite easily, but I still want to enjoy the game 😅
quests
guessing a mod config feature?
open inv top left
oh luna saying to update?
how do i set up a BMC4 server when i buy a server on Host Unlimited? I must do it with the FTP but idk how too do anything there, they just have the BMC4 v6 preinstalled their and idk how too get the new version on the server
Please read #faq for modpack installation.
yeah i'm on v19 and i manually added in the v20 mods / updated the other mods
all it is is just bosses and some craftable items tho... Sorry to say but it doesn't help me out that much
easier on my end to do that than to actually update the pack
v6 is so old
ask them in a ticket or something
darn, idk than 
most of it follows the vanilla progression system so you won't have to worry about that. like the bulk of new things are either dimensions or building blocks
oh okay, is there anything I should focus on getting (mods wise) early/mid game?
generally nothing specific outside of the storage network items for a bit better ease of organizing.
most of the early mid game will be discovering new structures or biomes
if you are expecting like a tech mod expansion or bunch of new tiers of tools you won't really see that until you enter new dimensions
waystones
ah yeah ofc, forgot about them, thank you a lot 😄
np
Is Aether Redux able to be deactivated or is it something that has a bunch of mods in the modpack are dependent on?
hello
wait so what mod causes the "pack update" notification
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
buy minecraft and show it, or leave the server




