And Yes I have synced the pterodactyl to ctrlpanel
#No allocations satisfying the requirements for automatic deployment on this node were found.
limber flicker
daring yachtBOT
And Yes I have synced the pterodactyl to ctrlpanel
Hey, looks like you want to sync resources from pterodactyl.
You can easily do that from the dashboard, go to admin overview, and just press sync!
TL;DR: admin > overview > press sync
PS: Don't forget to link the nodes/eggs afterwards.
Check the guide to learn more about the product system. https://CtrlPanel.gg/docs/Guides/products
limber flicker
Hey, looks like you want to sync resources from pterodactyl.
You can easily do ...
no
No allocations satisfying the requirements for automatic deployment on this node were found.
daring yachtBOT
No allocations satisfying the requirements for automatic deployment on this node...
It looks like you have to link at least a node, egg or nest to the product. Check the guide linked below to learn more about the product system.
https://CtrlPanel.gg/docs/Guides/products
sullen glen
And Yes I have synced the pterodactyl to ctrlpanel
you only opened 2 ports, if the product you use uses 2 allocations you have 0 left
meaning you get the error, no allocations
you should maybe open like a range of 1000 ports
limber flicker
you only opened 2 ports, if the product you use uses 2 allocations you have 0 le...
i have range in 25565-25666
daring yachtBOT
:warning: Do not ping staff members for support! :warning:
A staff member will try to help you as soon as possible but be patient!
It looks like you have to link at least a node, egg or nest to the product. Check the guide linked below to learn more about the product system.
https://CtrlPanel.gg/docs/Guides/products
I am a bot, you dumb fuck.
https://tenor.com/view/robot-bot-i-am-robot-humanoid-servant-gif-7921953
limber flicker
do not ping staff members
daring yachtBOT
do not ping staff members
vivid parrot
do not ping staff members
so you added enough ports and synced on cpgg after and its still throwing that error?
limber flicker
so you added enough ports and synced on cpgg after and its still throwing that e...
did you even read what i said
vivid parrot
yes, thats why im trying to confirm?
portrange of 25565-25666, fails to create on second server onwards
limber flicker
now i set it to 6000 - 8006
daring yachtBOT
:warning: Do not ping staff members for support! :warning:
A staff member will try to help you as soon as possible but be patient!
vivid parrot
make sure you have enough ports set to the correct node ip on pterodactyl on ->nodes->nodeName->allocations
cosmic canopy
0.0.0.0 is not a valid ip. You must specify the external ip of the server, as required by the pterodactyl documentation
daring yachtBOT
:warning: Do not ping staff members for support! :warning:
A staff member will try to help you as soon as possible but be patient!
cosmic canopy
Well, the IO parameter should be between 10 and 1000
daring yachtBOT
:warning: Do not ping staff members for support! :warning:
A staff member will try to help you as soon as possible but be patient!
cosmic canopy
My advice to you is not to mention the staff every 15 seconds, otherwise, you may not wait for your problem to be solved.
daring yachtBOT
My advice to you is not to mention the staff every 15 seconds, otherwise, you ma...
graceful tusk
No allocations satisfying the requirements for automatic deployment on this node were found.
viral hawk
No allocations satisfying the requirements for automatic deployment on this node...
Create more allocations on your node
graceful tusk
there's already enough
I looked at the database, everything was normal, and I also synchronized it but it didn't solve the problem.
It didn't make sense, but it started when I deleted two users
graceful tusk
I noticed something here I deleted the only server that was successfully created without any problems! Then I recreated it and it was but apparently it only creates 1 server after the error
No allocations satisfying the requirements for automatic deployment on this node were found.
daring yachtBOT
I noticed something here I deleted the only server that was successfully created...
It looks like you have to link at least a node, egg or nest to the product. Check the guide linked below to learn more about the product system.
https://CtrlPanel.gg/docs/Guides/products
patent prism
I noticed something here I deleted the only server that was successfully created...
are you sure the there is space for the server to fit on the node?
by space i mean resources like RAM and Disk
graceful tusk
yes it has plenty of space, it has memory and cpu storage allocations...
The weird thing is that I can only create one server. If I delete it and try to create another one, it works now, but if I try to create more than one, it doesn't work.
viral hawk
Does the node have enough RAM and disk in pterodactyl?
graceful tusk
Does the node have enough RAM and disk in pterodactyl?
No, everything is normal as I said
It's as if he was trying to get a busy allocation, something like that
When I renew the server, then I can create a server again
patent prism
The weird thing is that I can only create one server. If I delete it and try to ...
huuh interesting
im not sure what's the problem
try syncing ptero again
daring yachtBOT
try syncing ptero again
Hey, looks like you want to sync resources from pterodactyl.
You can easily do that from the dashboard, go to admin overview, and just press sync!
TL;DR: admin > overview > press sync
PS: Don't forget to link the nodes/eggs afterwards.
Check the guide to learn more about the product system. https://CtrlPanel.gg/docs/Guides/products
graceful tusk
Hey, looks like you want to sync resources from pterodactyl.
You can easily do ...
I've tried too