Training Gear: Digimon Link Pendulum 1.5 | Nurture Train Battle

[dim magnet]

You would need wires

[formal plank]

ok so ch341a programmer and micro sd breakout the programmer has a bunch of different kits

[dim magnet]

You don't really need a kit unless you plan on flashing other things

[formal plank]

its all this for 13$ breakout is 3$ pretty cheap so the dim goes into the breakout and the programmer clip goes onto the breakout and usb to pc am i getting this right if so i can prolly get it from there the software side seems pretty simple and yea if i get this i will more than likely mod everything else that i can i cant leave stuff alone im a maintenance tech by trade so tinkering is my fun much appriciated on the help tyty

[clear thunder]

the current version is 1.1 and it is compatible with the app for storage, right?
my VH just arrived, but i wanna head to the gym with it lol

and i can store the little tsunemon i got and the app will accept the modded device as the same?

any reason this could be happening?

backup went normally

[turbid notch]

I just got my VH!! Time get deep into this! >:D

[trim pivot]

Yes, You can store D-Link Digimon in the Arena app just as you would any other.

[trim pivot]

Hmm, press "Check DIMcard " again and see if it still shows the DIM as readable

[clear thunder]

yeah seems fine

[trim pivot]

Welcome to the Brigade 💪🔥

[trim pivot]

Well, That's a good sign at least. Try backing it up again and then restoring after that again.

[clear thunder]

backup went fine, but restoring failed

[turbid notch]

Just a quick question.
I just turn it on and ask me for a DiM. Do I insert any dim so i can then access to he main screen? Or I can just plug the DiM with the mod?

[trim pivot]

You can plug the new Firmware DIM in at that point.

[trim pivot]

Which BIN file are you trying to restore? and Do you have another DIM you can use? so we can see whether it's an issue with the individual DIM or something else.

[clear thunder]

the ver. DM
yeah, backing it up now but i was already trying between two different VS cards

nope, failed again
it's not possible my SD module can read but not write, right?

i can't seem to restore anything now

i'll try restarting my pc real quick

[trim pivot]

wait one sec, this hapend to me

I had the same problem, You have the self assembled programmer right? with the wires?

[clear thunder]

yeah

[trim pivot]

ok, The writing wire is most likely not tight or needs replacing

[clear thunder]

thank god i got 20 of those lol

which one?

could be a bad solder too, but it worked fine a few days ago

[turbid notch]

Oh my, this must have cost like a guillilion dolars to made and implement.....otherwise i dont know why we got A SIMPLE BLUE/GREN/ETC SCREEN!!

(I love them BTW, i LOVE them...)

[trim pivot]

Lol, Good thing you have more to spare. I bought extra for the same reason. Which one though? That I am unsure, When I had the problem I had to test each wire individually until I found out which one was the culprit

[dim magnet]

Got a multimeter?

[clear thunder]

nope, having a solder is a funny story lol

[eager harbor]

SHINKA!

@clear thunder has evolved into Child!

[clear thunder]

i'm assuming it's the CS and I just did a bad solder job bc it's kinda visible

[dim magnet]

Post a picture of your setup. Did you use a breakout with pre-soldered pin headers or did you solder them yourself?

[clear thunder]

i only had to solder the sd module

[dim magnet]

One of the pins look a little sparse

[clear thunder]

it's a bit bent but nothing scary

[clear thunder]

the second from up, right?

[dim magnet]

Sure, the one that you had the purple wire on. Though I would recommend touching up them all

[clear thunder]

yeah I'll try that, i just get a bit scared of unsoldering them all lol

[dim magnet]

You don't need to desolder. Just add a bit of fresh solder

[trim pivot]

NOTE: For anyone who's reading this chat, is potentially
looking into the Digimon Link mod and may be frightened or put off by the thought of soldering. Know that soldering is optional. You can buy the programmer parts and just plug everything together like Legos and it'll work just fine. It's how I use mine and it's very simple to do. If you are still uncomfortable with that, you can also buy a fully assembled programmer from Bazjo as another option.

[clear thunder]

while i'm at it, i do need to make sure the final soldered pins aren't connected inbetween them, right?

[dim magnet]

Yes

[clear thunder]

cool

[dim magnet]

If you do have solder bridges, I suggest solder wick, but for smaller ones you can usually just flick the extra solder off

[clear thunder]

omg i think it's fine finally

it was probably cables, soldering AND a bad usb port bc i really don't wanna find out which one would get me more frustrated

[trim pivot]

Ignorance is bliss they say, Glad you got it working and you're back in action🔥

[wicked ridge]

+1 on that. I just followed the guide from Mr. Blinky to the letter and mine works without any issue. I am not a smart woman and only vaguely understood what was happening, and somehow magically I have a very ugly flash drive that lets me thinker with my watch. If I can do it anyone else can. 😂

[clear thunder]

and also if anyone ends up buying the unsoldered type of module, it's really not hard to fix and they're so cheap you can train a new skill!!
i learned it by changing a gba cartridge battery, so doing it on a 6 BRL piece is waay easier on your heart

anyway, love the mod so far
is there any way to change the clock to 24h? or adding simple backgrounds in the future

[trim pivot]

I'll add the 24 hour swap feature to the list of considerations. Simple backgrounds, Are a consideration but note there are 10 wallpapers on device already and every new sprite / graphic takes up space. Right now we're pushing the Digimon Link system to it's limits already and any bit of extra space is valuable. but never say never

[clear thunder]

oh no i love the bg's just some get mixed with the text
the digital dark one works great for me atm

[trim pivot]

And Nichow and Chungus are 100% correct. It does teach you a subtle new skill and you do get an odd satisfaction when you do finish assembling the programmer 🙂

Ah, simple as in UI readable. That's something I'll take to note as I understand that completely. The blue, green and orange backgrounds were plain but you could see the UI without strain.

[clear thunder]

yeahh maybe something where the art is mostly around the digimon could work great
I checked your work and I totally can see the process around the backgrounds you made, amazing stuff!

[trim pivot]

Thanks so much, I really appreciate that 🙂

[verbal otter]

Done.

[trim pivot]

Done? Maybe this is just the beginning 😮

[verbal otter]

Done with 1 😆
3 more to go.

I'll probably keep those boxed for now, otherwise i'll forget which dim goes to what VH.

[opaque mulch]

I have a question regarding the digivice version, after reset to child stage, would I carry any stat enhance from previous?

[trim pivot]

No, the enhancement is based on how many trophies you have. So since they reset every evolution or de evolution that means stat changes will as well. However, The trophy power system is less grindy than having to max three different stats to 999. Most times, depending on lvl match ups you'll notice a significant boost after 12 trophies so you will barely notice. This will also encourage consistent exercise or interactivity through play cycles.

[turbid notch]

I forgot how bad the battery in this thing was xD
The mod is working fine so far.

[turbid notch]

I love this mod so far. Even the manual has its charm.

[trim pivot]

Glad to hear that 🙌 and thanks for your enthusiastic appreciation towards the environment wallpapers yesterday! If you enjoy getting immersed in environmental wallpapers I think you'll enjoy a change that was made in ADV mode

[turbid notch]

I havent entered the ADV mode yet! 😮

[trim pivot]

Ooh, I won't spoil it then 😄 Hint: it's a subtle immersive change but it's not in early VB models. However, it is in the BE!

[turbid notch]

Once i reach Machmon/MtlMamemon I will try it 😄

[clear thunder]

kind of off-topic
but is there a guide to the dim modifier?
and can i mod a dim that is already inserted? ie i got a primieval warriors dim in and want to mod it, could i send it to the app and when sending it back to the vh using the modified dim?

in-topic
what do i press for instant battle?

[dim magnet]

Most info should be in the pins of #modding_vpets

You can send to app but you need to swap with backup or power cycle, otherwise sending something from the same card will just use the cached copy of the card and not prompt you to reinsert

You can start a battle by holding the bottom button on the home screen

[clear thunder]

gotcha I'll ask there later since i didn't find a guide

[clear thunder]

yeah that's the plan, glad it works!

[clear thunder]

thanksss

[formal plank]

mod is pretty easy once you get the programmer lol i ordered the long sd connector not knowing but just cracked the dim case open and it inserted just fine to dump and load cant wait to check this mod out thanks for all the hard work guys and gals if applicable lol

[trim pivot]

Appreciate it! Ya, whole process of modding the VH is way over hyped. Once people actually do it, they always say it's easy.

[dusky birch]

Hey thanks for having updates pinned

Thats super helpful

I also set my friend up with this too 😄

[fathom venture]

Off topic, how do i jogress?

[eager harbor]

SHINKA!

@fathom venture has evolved into Baby II!

[dim magnet]

The same way as usual

https://humulos.com/digimon/vbdm/manual/#evolution

[turbid notch]

Waaaait...it has been an update for the patch already?
I download the files from the first comment.

[fathom venture]

So i can raise two digimons on 1 device as long as i store 1 in the capsule? Sorry first tym

[round idol]

Actually, the plural of Digimon is k̶̓̆o̶͐̅n̸̊͘g̸̿͘k̸̂̊u̸̓̅n̸̈́̑n̵͗͝k̸̃͑g̷̒ko.

[trim pivot]

Yes you can raise two Digimon and have one in the Capsule and, if properly matched they will jogress as usual.

[trim pivot]

There was a small bug fix where in the. Digivice ver, Digimon would wake up at night after de evolving causing mood and vital lose. It's in the pins as Digimon Link 1.1

[eager harbor]

@trim pivot has leveled up! (5 ➜ 6)

[turbid notch]

oooh okey, cool. I dont need it then, I use the other mode :p

[dusky birch]

Welcome to the club first of all, and yes.

You picked a good dim card

[clear thunder]

incredible mod
it's so fun being able to destroy all battles by overtraining lmao

will be checking if i can finish the whole adventure mode with a 30 trophy rapidmon

[trim pivot]

Aww, Cocky Galgomon is as cute as he is lethal 😮 Nice work on the gatling guns they look solid and weighty

[clear thunder]

thanks! I'll try polishing him up sometime

also, rapidmon is doing very well against the modded adventure mode

[clear thunder]

amazing mod this was so fun to do and made me spend 30min on the threadmill lmao
42 trophies

I didn't even want rapidmon armor, but I'll keep the little golden guy

[trim pivot]

Lol, That's so funny seeing a perfect beat the final boss with Trophy power, you didn't just win you pulverized him with what looked like full health too xD

[trim pivot]

Side Note: To you and anyone reading , about you being on the treadmill for Trophy Power. It's really cool anytime I hear this mod got someone moving. While this mod was crafted to support all play styles, one of my early motivators was to continue what the VB series started which was encouraging exercise, it got me off the couch in 2021. Besides your comment I've been seeing people here and there in this discord talking about exercising with this mod, hearing this mod is continuing to encourage people to exercise is awesome.

[clear thunder]

years ago the original vb actually got me a really nice build just from going to the gym! so i felt like this mod could be a great motivator to get back in shape
the reps i feel can only be done shaking the watch, but adventure mode is way too much shaking (even when modded), but a good amount of running/walking! and kinda forces me to get into cardio pace

[trim pivot]

Heck ya, I have the same experience with ADV mode. The cardio from jogging really does wonders and it seriously builds leg strength

[gentle steeple]

hey i have a question , i only have a dim card to flash so i flash it multiple times , my question is , could i flash the mod into it , bakc up it and then flash it again? the backup keeps my original vh program so later i could restore it?

[trim pivot]

Yes, as long as you store your backups on computer you can flash the DIM with various content as many times as you'd like.

[gentle steeple]

thanks

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #102 - 16)

[gentle steeple]

I have a question again my friends i have finally installed the mod and i am so excited about , well my question is , how long does it take to a digimon from the digital monster ver. to evolve? i know the digiver ver can do it anytime but how about the ones from the digital monster bin?

[dim magnet]

It takes the normal amount of time

Suggest reading the manual that came with the device if you want to know more about gameplay

[gentle steeple]

yeah sorry i just realized i can see that stuff too just pressing the b button thanks 🙂

[round idol]

Gave +1 Digi-rep to @dim magnet (current: #2 - 514)

[gentle steeple]

Sorry i have another question , ítems work with them still right? I mean the ones from the app to reduce their evos time

[dim magnet]

Everything on the app still works the same way

[gentle steeple]

Thanks My friend

[round idol]

Gave +1 Digi-rep to @dim magnet (current: #2 - 515)

[zenith vine]

Cool cool thank you

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #95 - 17)

[zenith vine]

I’ve been making my own custom dims and I have an idea for another after I figure out the one I’m currently working on just waiting for the programmer now

[fathom venture]

Off topic, i tried to transfer my wargreymon from the app to my device, the app finished the animation rffect of sending, but my device kinda glitched. Now my wargreymon is missing. Not on the app and not on my divice. How do i recover it?

[dim magnet]

You don't, it's gone

[turbid notch]

That happend to me with my MetalMamemon. I blame the App 🥲

[trim pivot]

Ya it's definitely not a Digimon Link Firmware issue. For anyone reading who may be new to the VB series. This has been a persistent issue since the lauch of the VB series. It's caused by the app and because some phones are more or less compatible with it. Sorry about Wargreymon, Losing a Digipal unfairly is tough

https://tenor.com/view/hats-off-respect-honor-vikings-armor-gif-4065682

Forgot to give condolences to MetalMamemon. Here's to the real ones and the few lost too soon

[gentle steeple]

Yeah , actually i heard about it but it never happened to me til today at 1 year almost from having My VH and I Lost My betelgammamon 😢

[swift kettle]

I thought I didn’t like the cocky mood at first, but I think its kinda fun if you use it right

Just watched Skullgreymon one shot victorygreymom and BlackWar

Awww he just lost to the humble Metalgreymon

@trim pivot I have a small request for the next patch if possible. Is there anyway to make the text when you click the bottom button more visible with the new BGs? Its hard to see the text but its more seeable on the BG that comes on the loaded Dim. It doesn’t seem to be too hard to read on darker BGs but the lighter ones reading the time till evolution is kinda tough

[eager harbor]

@swift kettle has leveled up! (1 ➜ 2)

SHINKA!

@swift kettle has evolved into Baby II!

[trim pivot]

That's understandable. I'm going to have a universally UI readable background placed in for another option for clarity. For the evo timer, I'll look into changing it so that it will be universally readable no matter the background. That way people can still use their favorite Backgrounds and read their evo time, even if it's on a lighter wallpaper.

[swift kettle]

Sorry if it sounds like I’m complaining. I like the blue background a lot, its just hard to read the text

[trim pivot]

No, you asked respectfully and it's a valid need you were expressing. No worries, I discussed it with Cyanic and we're already making plans

[fathom venture]

Can you add nfc pvp battles? Its a hassle to always bring a vs dim card haha

[dim magnet]

No, because that's not how the hardware works

[spring bay]

Is this good for like someone who has a tablet?

[trim pivot]

To install Digimon Link you will need programs and drivers that rely on PC. Mac, if you can find a work around.

[spring bay]

I don't know how that works. I have a Samsung tablet

[eager harbor]

SHINKA!

@spring bay has evolved into Baby I!

[trim pivot]

You won’t be able to experience Digimon Link unless you have access to a desktop / laptop computer. To install it, you’ll need a program called Mr.Blinky’s DIM Tool, and to add further graphics, you’ll need Gfogrady’s DIM Modifier. Both tools only work on operating systems designed for desktop/ laptop PCs, and are not compatible with tablets.

[formal plank]

what does it mean when theres a explanation mark above my mons head on home screen is it not detecting heartbeat or is it for innactivity

[lofty cradle]

Hey all! Just got my programmer in and SUPER excited to get this updated. Out of curiosity, before I start the process I understand that the new bin file will install the new firmware and create a backup on that same DIM. Am I able to use Mr blinky’s tool to backup that bin file to my PC once it’s completed?

[dim magnet]

The former

[dim magnet]

Yes

[lofty cradle]

This is awesome. I’m so excited to get this going! Thank you all for your hard work!

[round idol]

Gave +1 Digi-rep to @dim magnet (current: #2 - 517)

[lofty cradle]

SO EXCITED!!

[hidden raft]

Yo is there a github to download the .bin?

Just wanna know for when i get a dim card thing

[lofty cradle]

It’s currently the pinned comment.

[eager harbor]

SHINKA!

@lofty cradle has evolved into Baby I!

[formal plank]

whats the best thing to use to trick the hearbeat sensor ive got it in a brick style case but need to find something that reliably tricks the sensor

[trim pivot]

The VBV and VH sensors are proximity based, So if you put something in front of it, it will activate. The problem is the activity level that goes down from lack of steps. Nothing you can do to get around that but to shake the device from time to time.

[formal plank]

ok ive put foil between the folded clear packing tape and now i got a grey cloud so were doin something lol and yea plan is to carry it around at work without having to wear it on my wrist its a lot safer in this 3d printed housing in my pocket

i take it stormy cloud is innactivity

[trim pivot]

However, since you have the device in a shell and are practically playing it as a traditional Vpet, keep in mind that Praise and Scold are two specific interactive features I created to address the issue of VP drain that you're facing. You can leave your Digimon alone for a couple of hours, which will cause you to lose vitals and happiness, yes. But you can use Praise to regain all the VP you lost and restore your Digimon's mood to full. It's very similar to feeding a traditional Digimon Vpet after it's been left alone and has gotten hungry. Also, if you gain too many vitals for your desired evolution, you can use Scold.

[trim pivot]

Storm Cloud only means upset state in Digimon Link, Check your Mood Meter, it should be near or fully empty

The red "!" means inactive

[formal plank]

yea found it its from me testing the sensor think i got it all sorted and it should work great carrying it around at work

[hidden raft]

Kinda a suggestion/question here, there should be a setting where you can pause the evolution timer if you wanna spend more time with a specific stage of your digimon

This should probably pause or debuff the amount of stats gained or something, OR it should buff the amount of stats gained due to having a weaker digimon

Because when you do adv missions and battle at the end of a stage, you will have a weaker then normal digimon

Or for like nfc random battles or vs dim battles etc

[trim pivot]

If you'd like to spend more time with a specific stage Digimon you can press and hold select during the start of the evolution sequence and it will cancel the evolution + reset the evo timer.

[trim pivot]

When you cancel evolution your Digimon's vitals and trophy count stay the same as well, so you will also be able to resume ADV training without worry of setback.

[hidden raft]

Hmmm alright

[pliant saffron]

just got a VH! is it recommended to set up the bracelet (date,time,dim) before the mod process or does it not matter the order it’s done in?

[dim magnet]

You need to set the date before it lets you insert a Dim, but otherwise you can install the patch right away

[pliant saffron]

Thank ya!

[eager harbor]

@pliant saffron has leveled up! (0 ➜ 1)

SHINKA!

@pliant saffron has evolved into Baby I!

[timber cloak]

Where can I find the mod for the vital hero bands?

[eager harbor]

@timber cloak has leveled up! (0 ➜ 1)

[dim magnet]

Well this is the thread

Check pins

[timber cloak]

Ah, ok (;

Where can I find the thread tho?

Sorry pretty new here

[dim magnet]

This is the thread

[timber cloak]

ohh

[trim pivot]

If you haven't found the download folder and are not used to Discord, If you are on mobile go to the title of this thread and click on it. Look for "members" and to the right of it you'll see "pins". Click that for the download folder. If you are on desktop or Laptop look up to the top where the title is, to the right you will see a bell and to the right of that you will see a pin icon. Press the pin Icon and the download folder will pop up.

[dim magnet]

Definitely do this on a computer rather than a mobile device

[timber cloak]

yes, thanks for the support I managed to find it. Thanks yall (:

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #90 - 19)

[pliant saffron]

first mod project and I can’t believe I did it. A million thanks to the team involved. So excited to have a pep in my step.

[timber cloak]

Can you do online battles with the digimon link mod?

[eager harbor]

SHINKA!

@timber cloak has evolved into Baby I!

[timber cloak]

Also can I still store my digimon on the app after modding my vital hero?

[dim magnet]

App interaction and VS battles have not changed

[timber cloak]

Oh, good to know about the app

So the app does not have battles anymore right?

sorry for the questions Im pretty new to vpets and Im super hyped with this modding scene

Is there any plans to incorporate online battles on the digimon link:

[dim magnet]

No plans to make a separate app

[timber cloak]

I see

[trim pivot]

This isn't an Online Battle, However, since you brought it up, If Tamers with a VBDM, Digivice V, or VH would like to battle their friends around the world. Here's something I've been toying with and recently tested.

The process would need to be done in 10 minutes or possible risk of losing Digimon. When testing I was able to do it in that time.

[young orchid]

do i need any physical device to install the mod?

[trim pivot]

You need a programmer, basically Like USB stick that you plug your DIM card into. You can find out how to assemble or where to buy it in the Digimon Link Manual in the Pins

[lofty cradle]

Honestly a really genius workaround.

@trim pivot the good word is being spread.

https://www.reddit.com/r/DigimonVitalBracelet/s/1nJjCB03W9

[young orchid]

I wanna ask, i'll be still able to connect to VB arena app while using the mod?

[trim pivot]

Yes, you will

[young orchid]

Perf, thanks, i just ordered the pieces

[graceful wasp]

Does this mod fix sensor, i have custom shell mod and vitals are dropping?

[dim magnet]

No, it just gives you some options if you're not getting enough mood/VP

[trim pivot]

There's specific interactive feature that I created that address vitals dropping called praise and scold. If you're vitals and mood drop just use praise and it will restore the vitals you lose

Scold is what you'll use if you ever find your Digimon has more vitals than your required evolution needs and you want to lower VP

[graceful wasp]

Awesome, i noticed it says its for english version, how can i check which one vh i have?

[trim pivot]

Sweet, Thanks for sharing that! That was a really nice review aswell by Yonk?

[round idol]

Gave +1 Digi-rep to @lofty cradle (current: #629 - 1)

[trim pivot]

Does the box you bought it in say Vital Hero?

Or when you insert a DIM does it say Vital Hero

[pliant saffron]

Hope it’s alright I posted on Reddit saw it was getting some questions and I know I’m not the most knowledgeable, so I tried to guide some folks here who seemed interested!

[young orchid]

I have another question: I ordered the parts and see the instructions but this requires soldering any parts? I am horrible at soldering

[eager harbor]

SHINKA!

@young orchid has evolved into Baby I!

[trim pivot]

No, just plug togeather.

[young orchid]

And some black tape

[trim pivot]

That's awesome, and I'm glad you shared it , Thanks for helping people too!

[young orchid]

I'm sharing this with my gf, this is just fire

[trim pivot]

I didn't use black tape but you most certainly can. I think Chungas taped their programmer?

Or they used rubber bands

[graceful wasp]

I really dont remember for box, but when i insert dim it says only waiting and then load dim

[trim pivot]

When it loads it's going to tell you to put on your watch. If it says Vital Hero you'll be all set. If it says anything else, you'll have to buy a VH which can be found on places like Walmart for $11 and Amazon for $15

[graceful wasp]

Its packed in plastic? Or in box?

[trim pivot]

The VH comes in a box, but loading a DIM will tell you what version you have if you can't find the box

[young orchid]

Hold on do i need an specific version? I just received my VH

[trim pivot]

Nope, you're fine.

[dim magnet]

You need the Digimon one specifically

Does not work on Batman

[trim pivot]

Oh yes, that's true. No Batman one

[dim magnet]

Color does not matter though

[young orchid]

Yeah got the impulse city version

[graceful wasp]

Eh, ill try to mod it, if i brick it let it be haha

[trim pivot]

You won't brick it. It will just reject it

[young orchid]

..glad to know that

[young orchid]

Is there any guide or manual to read about this mod?

[dim magnet]

It's included in the download

[young orchid]

Oh oka

[trim pivot]

I just noticed you were the one who wrote the really nice introduction / review of the Mod in the comments and Yonk shared how easy it was to install. My goof, Thanks to both of you!

[round idol]

Gave +1 Digi-rep to @lofty cradle (current: #474 - 2)

[lofty cradle]

No problem! It’s been a pleasure getting to try this out. I’m curious to see if there’s anything else you do/add to it in the future

[trim pivot]

We’re actually working on an update as we speak. Just a heads-up to everyone regarding requests, I’m truly thankful for all of them, as they’ve helped us address some of the issues you’ve had and shape what I believe is turning into an amazing upgrade.

Not only that, but your comments about what you’ve loved and enjoyed have also helped guide the direction of this next update.

That said, the window for new requests is now closed, as Cyanic and I are focusing our efforts on delivering the next installment in a timely manner. I know many of you are just as excited for the next update as I am, and we’re dedicated to getting it out.

[sturdy heart]

is anyone selling premade sd stick programmers that ship to the US?

a quick etsy search didnt help

[dim magnet]

You should just call it a Dim programmer. "SD stick" is an euphemism to avoid trademark issues, and completely unnecessary

It has nothing to do with SD aside from the pinout anyway

[sturdy heart]

gotcha

[sturdy heart]

is there a database of custom DIMs out there?

[dim magnet]

General questions go in #modding_vpets

[trim pivot]

You can buy a pre assembled DIM Programmer from Bazjo https://ko-fi.com/s/ddc17a6052

Bazjo had a single DIM programmer for $17. It's now sold out, I believe because of this mod, If anyone wants a pre assembled DIM programmer, you might want to jump on it.

If anyone reading can't get a pre assembled programmer, Getting the parts is more affordable and like many have reported, is very very easy to assemble and use. It's difficulty is more hyped than it's actual application

[verbal otter]

I made one on a breadboard. If I can do it, anyone can 😆

But i like mine to be a bit more professional looking. So i bought Bazjo one.

[fathom venture]

What updates are those? Show us the list hahaha excited much

[trim pivot]

Now, now, no peeking behind the curtain 😉

[lofty cradle]

I came into this after the 1.1 update. When the new one drops will I need to revert my VH to the original firmware then to the updated mod?

[dim magnet]

Yes

[faint comet]

Remember to back up your vh og firmware to your laptop the cloud or something else!!

[young orchid]

Is there a way to exchange one dim for another?
The context is that a friend gave me his metal empire and hermit in the jungle DIMs, which I already had but I accepted them anyway, can the digimon be exchanged with an app as if it were for example the ryudamon/spimon DIM [which are practically impossible to get]?

[dim magnet]

Not sure what you mean. A Dim will show up as that Dim in the app, not sure how you expect to show up as a completely unrelated Dim

If you want to overwrite your Dims you can do so, but there's nothing on-device that would do that

[young orchid]

Sorry my English is still not very good.

What I meant is for example: change the data of my dim (nu metal empire) for example to ryudamon/spimon, is that possible?

[dim magnet]

That is possible but doesn't have to do with this mod. Discussion for that goes in #modding_vpets

[young orchid]

Oh srry, thnks

[stray roost]

Might be a bit of an ask, but is there a chance we could get the backgrounds you used, the ones of File Island?

Im making an Adventure themed BEM and they're all so well made, id love to use them on my VBBE as well as my VH.

[trim pivot]

Digimon Link is meant to be a fully immersive and self contained experience. The visuals, features, and mechanics are part of what makes it unique so I keep them exclusive to the mod, not shared piecemeal. That’s the vision, and it’s important to me that it stays intact. Thank you for understanding

[round idol]

Gave +1 Digi-rep to @stray roost (current: #371 - 3)

[stray roost]

Yeah that's all good, I completely understand. 🙂

[dusky birch]

Hi guys

love how I didnt' have to take my watch off when I pushed my digimon to far

[young orchid]

I'm a bit curious but I would like to ask: how much did this cost? I don't want to sound rude or insensitive but this is an incredibly well done job and it makes me wonder: can I play this for free?

[dim magnet]

Yes, you can download it for free

[lofty cradle]

The mod itself is free. Keep in mind you will need a DiM programmer to be able to install the mod.

[heady cave]

Can someone help me install the mod on my Vital Hero? I already have everything it asks for, but I don't know what steps to follow.

[dim magnet]

Do you have the hardware and software for writing Dims?

[heady cave]

yes

[dim magnet]

Are you using a blank Dim or a retail Dim?

[dim magnet]

Make a backup of the original, then write the version of the mod you want to the Dim

[heady cave]

ok

[eager harbor]

SHINKA!

@heady cave has evolved into Baby I!

[lofty cradle]

👀

[heady cave]

Is this already included or should it be added?

[dim magnet]

As it says on the page, you need to modify other Dims yourself

[heady cave]

Will there be online battles again?

[dim magnet]

Not something in the scope of this project

[raw relic]

You guys are amazing! Thank you for keeping the vb alive!!

[cyan geyser]

Alright, I ordered the parts to make a programmer. Hopefully I got the right ones 😅

[dim magnet]

CH341 sucks, but if you're only doing this once, you'll get by

[cyan geyser]

Hmm. What would be a better one? I must have misread the blinky page

[dim magnet]

Anything but CH341

[cyan geyser]

It might be fun to do some custom dim stuff too 🤔

What are other options? I'm just using what's listed here (out at least I think I am)

http://mrblinky.net/digimon/vb/dimcardtool/dimcardtool.html

(I have no idea what I'm doing 😅 )

[dim magnet]

CH347, XGecu T48

[candid thistle]

quick question because i couldn't find it on the included guide: next to my digimon a red exclamation mark appeared for 5 seconds and then went away

What was that? should i be worried?

[winged spire]

I believe that means it was inactive for quite a while, as leaving it idle for 24hrs will kill your Digimon

It's like a warning

I don't know what exactly clears it tho, some amount of movement though for sure. I was worried when I got it when I didn't put palmon to sleep overnight but it went away after wearing it a while

[candid thistle]

mmh weird 🤔 i had it on when that happened so i'm not sure what could have caused it to react like that

that said, thank you 👌

[winged spire]

I am not 110% sure that's just when I notice it. I also struggled to find anything on it when googling around so I assume it's just a sprite swap for the "vital bracelet not worn" part of the official VH manual.

I imagine it just might struggle to read pulse sometimes like if its too tight or gets obstructed

[dim magnet]

It is for representing the unworn state. It takes a couple of steps getting registered for it to go away. It appears usually when it detects unworn from the heart rate sensor reading and that you've taken no steps for a few minutes

[candid thistle]

aaah i see, got it

[cyan geyser]

Probably silly question. BE dims aren't compatible with this, correct?

[dim magnet]

No

[tribal forge]

have now got a VH, just need the programmer and then I can try this out!!

[rigid linden]

I got a VH but didnt learn batman wasn't compatible till after I programmed the dim and saw version incompatible lmao

New VH gonna be here tomorrow

[sturdy heart]

can you use VS dims to install the mod?

[dim magnet]

Yes

[sturdy heart]

sweet. I have like 3 or 4

[lofty cradle]

That's how I did it. Would still recommend backing up the VS chip to be safe

[sturdy heart]

even if I have 3?

[lofty cradle]

I guess it probably wouldn't be that big a deal if you didn't

[sturdy heart]

does the mod allow BE memories to work or do I need to custom make DIMs with their sprites?

[dim magnet]

No

This has been asked several times already

[sturdy heart]

Thank you very much. I appreciate the response

[sturdy heart]

woo hoo! Bazjo restocked!

[mossy tundra]

question about dim cards

with this mod dim doesnt get ''locked'' like with the BE?

or dims does get locked and can't be used on other Vital bracelets

[tough bluff]

I think it gets locked, or at least recognizes locked cards. I have and dinasoour roar dim that had to be unlocked to be able to use it with the mod

[dim magnet]

That part has not changed. There's no hidden features. If it's not mentioned in the manual or something you can see directly, it's not included

[mossy tundra]

got it, thanks Cyanic!

[wicked ridge]

I just wanted to say I gave myself turf toe while taking advantage of the unlimited missions. Is this the first causality? (It was actually a few weeks ago, I'm fine now lol). Keep your heels on the ground doing squats, otherwise your digimon will point and laugh when you hurt yourself.

[trim pivot]

You can use the Mr.BlinkyDIM Tool that is used to install the Digimon Link firmware to unlock any DIM.

[trim pivot]

Ouch! The first year of having the VB. I strained my ankle tendons from going from a lvl 10 coach potato ( I went on long walks frequently but nothing intense. ) to excessive jogging and squats xP Nothing serious but I did have to slow down for awhile. Haven't had that problem since though as my legs adjusted and are stronger now.

[rigid linden]

So I've backed up and edited a few of my DIM cards to use the fonts, cut ins, and adventure mode layout recommended for Digimon Link. However, when writing these on to a DIM and attempting to use it I get dim card fail. When using the unedited backup I dont have any issues. Any advice on how I can troubleshoot this?

[dim magnet]

That's a question for #modding_vpets

[rigid linden]

Alright thanks, I'll post there

[plain pilot]

Excuse me, but when will adapt to the Vital Bracelet V?

[dim magnet]

Not planned

[plain pilot]

🥲

[modern saffron]

Hey yall ! ! ! i sometimes am confused on the versions between the bracelets this mod only supports the VH which is the black/blue/red/batman version and not the vital bracelet digital mosnter one that comes in some other colors like white ?

[dim magnet]

Batman is not supported

If it says "Vital Hero Digimon" on the box, it is supported. Everything else is not

[modern saffron]

got u thanks ! !

[fathom berry]

Installed today, absolutely loving it! Completely relit my love for my vital hero 😁 tyvm!

[untold wagon]

Good morning, friends! Anyone tried these types of DiMs on the Digivice version of the mod? which would the digi revert to at midnight?

[round idol]

https://cdn.discordapp.com/attachments/716008974448590949/772869301124071454/morning_toko.mp4

[dim magnet]

It reverts to adult stage

Would be whatever you raised as an adult before

[fathom venture]

Didn’t the omega knight medarot have 17 AP?

[trim pivot]

Top-tier VBDM Ultimates have an AP of 9, with Susanoomon, the strongest attack stat Digimon, having an AP of 12. So, 7 AP for Omega Knight is accurate, as 17 would place him above Susanoomon.

[eager harbor]

@trim pivot has leveled up! (6 ➜ 7)

[fathom venture]

I just watched the top digimon list here

https://youtu.be/Bn7EqNXpIB0?si=0Qzsb7El95GNd0Dr

[vast trout]

really putting a digi from the very first dim on the thumbnail like they're worth anything,,,

[trim pivot]

Seems like an honest typo by the Digi-Dudes. To double-check, I looked it up using CfoGrady's DIM modifier, which reads the actual data from the DIMs. Instead of raising another Omega Knight, it confirms that Omega Knight has 7 AP.

[fathom venture]

Is there a guide on how to do this? I wanted to change or edit sprites

Also is there a list of Bin files here?

[dim magnet]

That makes no sense, becasue no one is distributing Dim files here

[fathom venture]

Do i connect the bracelet to the pc using the charger, then open the dim modifier and point it to the bracelets file?

[dim magnet]

Please don't call USB cable a "charger". Bandai made that mistake on their Amazon listing and they eventually fixed it

And no, the VB itself is not involved. You need a flash programmer to write to Dims

[fathom venture]

Oh so direct from the dim card to programer to pc? Then using the dim modifier?

[dim magnet]

Yes-ish. Dump the Dim, then open that file

[trim pivot]

You're going to need the latest VBBE firmware file from the official BE website to activate the Modifier program. After that, it's as intuitive as point and click. If you have further questions about modding outside of adding the specific Digimon Link resources included in the download packet, You will have to ask #modding_vpets. Otherwise you will be going off topic.

[teal jackal]

Just got this set up, the process was very straightforward. Thank you both for such a quality project

[round idol]

https://cdn.discordapp.com/attachments/819225271432380416/997516992586195074/IMG_3858.gif

[trim pivot]

Just had my very first live "online" VS DIM battle with Kryptidkaiju88. Liamon Vs Monochromon. Gotta say it was PRETTY awesome

[lunar lantern]

my new vital hero jsut got delivered, where do i start to download this and how?

[trim pivot]

Awesome! You can go up to the Pins and find the download packet. You have the DIM Programmer?

[lunar lantern]

i dont have the dim programmer, i honestly just ordered the vital hero assuming i would mod it the same way i did my vvbe

[trim pivot]

Aye, you're going to need to get the same programmer people use to mod DIM cards. Do you know how to get one?

[lunar lantern]

i dont, if you could point me in the right direction

[trim pivot]

Of course. You have two options. One which will save you $10 Follow this site for that option.

http://mrblinky.net/digimon/vb/dimcardtool/

and order the parts suggested and assemble your own. Also there's a more advanced option Cyanic suggest one sec

CH347, XGecu T48

optionally get that in place of the CH341A mini programmer mentioned on his site if you want faster processing speeds. Otherwise you get the rest of the parts on Mr.Blinky's website off Ali Exspress

Or you can buy a pre assembled DIM programmer from Bazjo for around $10 more

https://ko-fi.com/s/8627dd37e4

[lunar lantern]

thank you very much, and good work on the mod im excited to try it

[trim pivot]

Cyanic and I appreciate that

[cyan geyser]

My dim programmer parts arrive tomorrow!

Now to see if I ordered the right stuff

[trim pivot]

Nice! Fingers crossed you grabbed the right parts, I'll also knock on wood for you.🪵

[sinful python]

What dim should I run?

[trim pivot]

Well, Whaddyall think?? He's got Digital Dimensions to save, Apocalymon to stomp, he NEEDS to know

[frank parcel]

What do you use to physically label/mark/tag your Vital Hero and VS Memory after applying link mod to ensure that you know which VSmem has original firmware that belongs to which Vital hero?

[dim magnet]

Just dump it back to your computer as a file

If you have multiple, technically you can scan the VB with an NFC program and note down its UID

For myself I only have one device of each version out, so I don't really have this problem

[frank parcel]

Okay, thank you!

[frank parcel]

Is this the latest mod file?

[dim magnet]

The one that's pinned is

[frank parcel]

oh, okay. Apologies. Didn't check pins

Thanks again!

[lunar lantern]

where did you get that shell?

[sinful python]

Bought a clear shell from jlcpcb and painted it with transparent orange spray paint. And printed blue buttons. Then painted the symbols on the front by hand.

[lunar lantern]

i looks really nice good job, im thinking about doing something similar

i pike the shape of that digivice

[cyan geyser]

Yeah, the backing up takes a bit, huh?

Oh wait, or maybe it's frozen

[cyan geyser]

Got it working! This is awesome - thanks for all the work on this

[dusky birch]

Oh there is a new project? Tell me more?

[trim pivot]

Sweet, All the right parts came in. Have fun raising some monsters!

[trim pivot]

Not a new project BUT a way to fight with your friends long distance using VS DIMS by sharing the BIN file via Mr.Blinky's DIM tool.

There's the steps on how to do it. The CIM/CBM Discord set up a battle lounge for anyone who wants to share their VS BIN

[dusky birch]

Cool

thanks for letting me know

[daring carbon]

so i gotta open my vital hero?

[dim magnet]

No?

[daring carbon]

its alright

thanks

[timber cloak]

Guys im confused I already have the Dim copy tool assembled and backed up my vs dim and my wolf howl dim

but how do I actualy make the copy of the original frimware of my Vh so I can have the back up of the original thing?

[dim magnet]

The backup happens as a part of the installation. After that, just dump it as a regular Dim

[timber cloak]

oh

Thank you so much (:

All going well?

[eager harbor]

@timber cloak has leveled up! (1 ➜ 2)

[timber cloak]

Having more background options is very refreshing

[cyan geyser]

Yeah I love all the backgrounds

[timber cloak]

Is it possible to revert the clock to 24h?

[dim magnet]

No

[waxen swan]

Hello!

Im really interested in modding my vital bracelet

But i dont really understand the modding process

[dim magnet]

Simply put, rewrite a Dim, install, dump the Dim again and keep the copy safe

[waxen swan]

In particular, do i need any external hardwarw other than a computer?

[dim magnet]

You'll need a flash programmer

[waxen swan]

Is there any complete tutorial in this Page?

[dim magnet]

There is a manual in the download package

[waxen swan]

Is this one the one i need?

[dim magnet]

That'll probably work

You'll also need a short microSD adapter

[cyan geyser]

Little guy is giving me attitude 😂

[timber cloak]

Spooky boi

[ivory kettle]

Is this an appropriate SD module? https://www.amazon.com/gp/product/B0BV8ZQ81F?smid=A1YZW40LYQY3L1&psc=1

[ivory kettle]

I actually ended up going with this, for anyone interested: https://www.amazon.com/gp/product/B0B779R5TZ?smid=A1YZW40LYQY3L1&psc=1

Also, the Pulse City VH box is a bit more. It's only gone up less than a dollar, but perhaps a sign of dwindling stock of that particular one.

[dim magnet]

This might not be short enough

[ivory kettle]

I wondered, too, but it's a much more cheaper option. If not, the first I linked seems to be the exact same module use, more or less, and I'll just buy those.

[fathom venture]

Why does the file need to be sent back?

[trim pivot]

The restore file?

[eager harbor]

SHINKA!

@trim pivot has evolved into Adult!

[timber cloak]

What does the warning sign mean?

[trim pivot]

That's the inactivity/untethered marker. You may be seeing it because you appear to be seated and you probably didn't register any steps? It's no big deal, it just means your Digimon is in a state where it will start draining vitals due to lack of movement.

With Praise, you can ignore it until you're ready to move again. Just use Praise to recoup the VP and Mood you lost. If you want to get rid of it ASAP, either take a very short walk or shake the device a few times.

[timber cloak]

I see. Indeed the praise scold mechanic will be a life saver for me as I imagined

[cyan geyser]

I have a Bakemon currently. On the Evo section, it mentions "Bakemon" as my next Evo. Does that just mean I haven't met the requirements for the next stage yet? What happens when the countdown runs out?

[trim pivot]

Ya that means you haven't meet any requirments for the next EVO. If the timer runs out it'll just reload. No penalties

[cyan geyser]

Gotcha, thanks!

[trim pivot]

In case any of you planning on making any epic custom DIMs in the future, I want to bring up a small bug so you can avoid any trouble. Custom DIMs can have a sprite rendering issue during VS DIM battles. It’s an isolated glitch that doesn’t affect gameplay, but it can lessen the overall experience and enjoyment.

The issue is caused by DIM ID incompatibility, but don’t worry, it’s easily avoidable. Just make sure to use DIMs with the specific IDs listed on the pages. You can also find out how to identify your DIM card’s ID in the report.

Big thanks to 機械肥龍獸 for reporting the issue, and to Cyanic and Cfogrady for helping find the solution.

[hearty cape]

Saw this in my reddit feed in passing and has single handedly re-kickstarted my special interest in digimon again. Bought a vital hero literally 30 minutes later XD

[trim pivot]

That's so epic, Welcome back to the Digital World!

[hearty cape]

If you dont mind me asking though: would there have to be any changes made to my custom DIMs before loading them into the VH after its been modded? Like I know the need to change the ID, but is there anything else to be aware of?

[dim magnet]

It still works the same as usual. There are no Dim-specific features

[fluid owl]

https://a.co/d/3GiEtGw

https://a.co/d/4eaM1wt

https://a.co/d/9XAt9Uz

Are these the right base, short micro reader and wires?

Damn, looking at these pieces it might be cheaper to just get it premade

[trim pivot]

Have you checked Ali Express? You can get some parts as low as 99 cents

https://www.aliexpress.us/item/2251832654069211.html?spm=a2g0o.productlist.main.37.734cf9aeoF0GMS&algo_pvid=e9231637-219c-4f9a-843a-c3d04f32a109&algo_exp_id=e9231637-219c-4f9a-843a-c3d04f32a109-36&pdp_ext_f={"order"%3A"3"%2C"eval"%3A"1"}&pdp_npi=4%40dis!USD!2.83!0.99!!!2.83!0.99!%402103247417518442411527883e7507!12000036298518924!sea!US!0!ABX&curPageLogUid=k7cD9twM1yp7&utparam-url=scene%3Asearch|query_from%3A&_gl=1*bpjafs*_gcl_au*MjAzNzkwMzMyOC4xNzQ2NjU4MTAw*_ga*MTk3NDg4MjAxOTEzMzE0My4xNzQ2NjU3ODE4MTkx*_ga_VED1YSGNC7*czE3NTE4NDQyNDQkbzIkZzAkdDE3NTE4NDQyNDQkajYwJGwwJGgw

actually that's a welcome deal. It's usually $3 but still, that's not bad

[fluid owl]

Never used ali before. Apparently everything would run 5 bucks with shipping.

That seems way to good to be true lol

[trim pivot]

Yeah, it does seem that way, lol but I got my parts from Ali Express and both of my DIM Programmers work just fine

NOTE: I would buy two sets of female wires if you are going down the self assembly route. Sometimes one or two might need replacing.

[hollow drum]

I ordered mine in individual parts from AliExpress back in April, it all arrived and works just fine

[fluid owl]

That looks right?

[dim magnet]

The programmer looks too cheap. Are you sure you're buying the whole thing?

[fluid owl]

Not at all 😆

[fluid owl]

It's this

[dim magnet]

Someone said "Only 5 volts on ch341B", which probably isn't what you want

[fluid owl]

https://www.aliexpress.us/item/3256805610215204.html?spm=a2g0n.productlist.0.0.14ca4a8eqk4JGt&browser_id=efeb4fb8479b45c49e6abbabc34c2dbd&aff_platform=msite&m_page_id=efebfbbceabbabcc197e288183f1ff4113f91869d9&pdp_ext_f={"order"%3A"102"%2C"eval"%3A"1"}&pdp_npi=4%40dis!USD!4.76!0.99!!!33.95!7.08!%402103146c17518522593703907e271f!12000034384053610!sea!US!6413302497!ABX&algo_pvid=92c1bb95-0d53-4736-8f42-e3ded78a5877&search_p4p_id=202507061837392628387696443550005660857_4

Again sorry for all the questions

[dim magnet]

Up to you to get the one with or without a clip

[ivory kettle]

Doesn't Ali take upwards of a month for shipping typically?

[ivory kettle]

So, somewhat hilarious findings in regards to the 'larger' micro USB modules

You can take a drimmel with a grinding wheel and cut off the extra length, allowing the DIM card to get fully back to the connectors and work.

But I also went ahead and bought the correct modules for a more clean device lol

The primary issue is that any amount of jiggling is liable to disrupt the connection, so I'm only using my $1.50 DIM with it at the moment

[hollow drum]

It can vary, but usually not a whole month, in my experience

My order from above took just over a week

[ivory kettle]

Ah, that's not bad. I'll have to stock up via Ali

[hollow drum]

Make sure the SD card port also comes with the pins already attached. The one I got you could get either way.

[ivory kettle]

Fun fact: The Vital Hero has sold over 500 units on Amazon this month, between the three available models. Of course, that's just Amazon and not other retailers or stores. But that seems like a healthy user growth.

[candid thistle]

https://tenor.com/view/im-doing-my-part-serious-stare-gif-11979677

i actually had to buy 2 because i broke the shell of the first one lel

[formal plank]

i just picked up a couple red banded augumon ones on ebay for 10$ each and im tempted to buy a couple more

[cyan geyser]

Do the random battles only prompt same stage or below opponents? I could have sworn it used to be any stage but I can't remember

[rigid linden]

Off the top of my head it depends on what stage your digimon is on

So the Stage 3/4 encounter table is different from the stage 5/6 encounter table

I could be wrong, but I dont think Digimon Link changes that rule because anyone editing dims should keep the ability to modify that. As it stands, the manual for Digimon Link recommends how to modify your adventure missions for its gameplay style. Which leads me to believe Digimon Link leans more towards respecting modifications you make to your dims. So I dont see them modifying the encounter table when that would interfere with any changes the user could've made themselves

[cyan geyser]

Ah, you're totally right - I remember seeing that now. Right after I asked, a high level digi stomped me 😅

[dim magnet]

It's the same logic as original. The mod doesn't really modify the normal Dim logic

[cyan geyser]

Gotcha - thanks!

[ivory kettle]

So to be clear with the installation process: I am confused if you are expected to pull the DIM out after the backup is created, and then make a backup of the DIM via MrBlinky... or if you're just supposed to let the full process complete and then backup the DIM after the completion of the process?

[trim pivot]

Wait until the full installation is complete.

[true light]

hey i just got the VHero for dirt cheap... im very new to the Vpet but looking to install this. i was just wondering if any of the kamen rider dims work with this/ if anyone has the files for that

[trim pivot]

Kamen Rider cards will work on the Vital Hero; just keep in mind that you will not be able to store them in the Kamen Rider section of the VB Arena app, as the VH has a separate ID from the character’s watch. Sharing stock BIN files goes against Digi Hatchery rules.

[true light]

Understood captain 🫡 - got my dim card reader thing on its way . Shout out bazjo

[hollow drum]

For clarification - having 6 trophies will give a bigger combat buff than 3, yeah? And then even more every 3 additional trophies?

[trim pivot]

Exactly

[frank parcel]

Thanks a lot for this mod you guys! Just installed the Digivice mod today and it is just perfect!

[trim pivot]

We're glad to hear that Digi Destined!

[frank parcel]

Really cannot thank enough!

I never bothered to get into vital bracelets till now because of their vpet-ish nature, although I absolutely loved the varitey of digimon and sprites that they come with. I have always wanted a way to be able to use it like a digivice and switch between evos. This mod is like a dream come true

[trim pivot]

That's special, Glad our work was able to get you into the VB community because it is an awesome one

[frank parcel]

Couple of questions though:

1. Is there a way to de-evolve back to child instantly rather than having to wait for midnight in the digivice version?
2. The VB Arena app is just for storage now and no longer features battles. Does anyone know of any modded apps that might still have battle features on phone. Not necessarily pvp, just basic battles?
3. Other than NFC battles is there any other way to trigger instant battles?
4. I have never used Vital Bracelets before. So I am not sure what trophies are. Can someone tell me how they affect stats and what has been changed in this mod?
5. How do I know once a digimon reaches its max stats? Also, what's the fastest way to max out a digimon?
6. Do stats reset after digimon reset at midnight in the digivice version?
7. What are "Daily Hard Missions"?
8. Maximum how many digimon can be stored in "Capsule"? If the limit is still 2, then a good feature to add in any of the future releases you plan could be to make it up to 4 like in VBBE.

[trim pivot]

1. Midnight is the only time you can revert to child
2. One is in the works called VB Helper
3. Hold B on home to trigger instant battles
4. Trophies are items you need to fulfil certain evo requirements. Special to this mod: Every 3 trophies you gain you get an added strength boost.
5. Digimon have default fixed stats however you can max Vital Points and that will be shown on the circular vital bar under the vitals section. As mentioned on Digimon Link you can additionally boost stats via trophies and the max trophies you can get are 999
6. Trophy power with trophies and Vital Points will reset at midnight as you revert to child on Digivice ver.
7. Hard missions are now Reps, They are the training that let you gain trophies. Normal mission which is now Daily Goal allows you to earn 1 trophy a day.
8. 2 Digimon per VH. So one active and one in storage.
   gasp for air

[frank parcel]

Ok, thanks for answering all my questions! So right now, is there a way to increase trophies all at once to 999? If not, then is there a way to store multiple copies of the same digimon on the app? For example, I get a digimon to 999 trophies and want to keep 1 copy of it on my vital brace and 2 copies in the vb arena app?

[dim magnet]

No on having more than 2 save slots, and this is because of limited space on the VB itself. It can store a max of three Dims, one of which is a staging slot, so you're stuck with two

You can move a mon to the app, but there is no duplication. So if you want another one with max stats, you'll have to raise it from scratch

[frank parcel]

Oh, okay, I think I get the picture. Thanks again

Still thanks a lot for creating this wonderful mod! Really appreciate it!

[trim pivot]

Exactly, capsule storage takes up a lot of space and that space was and is being used strategically to add all the various new graphics and new innovative functions to the Digimon Link

[frank parcel]

That's alright. It's still easy to transfer to and from the app. So storage is not an issue as long as the phone or DIM is with us.

[frank parcel]

https://www.youtube.com/watch?v=7uS9WG9ep44&t=523s
Can someone please pin these 3 pictures and the tutorial video to the top? I had no clue about them until now.

Also, other than the 3 things above, anything else which is important and needs to be pinned?

[trim pivot]

I can add those guides and link to Dtathemes tutorial to the download packet next update, which is currently in progress.

[frank parcel]

Great, thanks!

[hearty cape]

The vital hero just came in today! Im excited to explore the mod!

[eager harbor]

SHINKA!

@hearty cape has evolved into Baby II!

[trim pivot]

Awesome! Enjoy the journey with Penmon 🙌

[turbid notch]

Can the first post be pinned?

I cant/dont know how to scroll aaaal over the top on android :'v

[dim magnet]

You can go to first post by clicking on the up arrow on desktop. Probably not a good idea to actually pin it because it's the old version

[turbid notch]

Oh okey.

So... what should I send to someone who wants to try this mod?

[dim magnet]

Just a link to this thread, and they can use the pins to find the current version download

[turbid notch]

Oh, cool.

Thanks!

[brazen frost]

Hi all, I have just found out about VB modding this week and have a few questions I need to clear up.
1st, I will need the parts to make a physical interface for a dim because the mod is installed on the dim, then the dim backups the firmware of the hero and then installs the mod to the hero.
2nd, after modding the hero will still work with the app and all dims as normal.
3rd, so this is a question outside the mod, the hero I got has a scratch on the inside of the plastic cover, I managed to take it apart and buff it a bit with glasses cleaner and cloth, it is less visible but still something that I can't help but notice, can anyone suggest something to buff it out with?

[dim magnet]

2nd, after modding the hero will still work with the app and all dims as normal.
Yes

[trim pivot]

For #1, yes, you will need to either buy parts for a DIM programmer or a pre-assembled one.
For the assembly route, follow the guide here:

http://mrblinky.net/digimon/vb/dimcardtool/

Mr. Blinky lists all the parts you'll need and the assembly procedure on his page, all of which can be found on AliExpress.

If you would like faster and safer transfers compared to the CH341A mini programmer on Mr. Blinky's site, you can look into the programmer Cyanic recommends, which is an XGecu T48.

If you would prefer to buy the programmer pre-assembled, you can purchase one here from a seller named Bazjo:

https://ko-fi.com/s/8627dd37e4

All the options above have been vetted and found effective by everyone here.

[brazen frost]

Thanks, that was my hope since I ordered the parts and a red hero to mod while keeping my blue hero stock (aside from replacing the wrist band adapters so I can have more comfortable bands.

https://ko-fi.com/s/524eef7e9d
Are these dim alternatives?

[trim pivot]

Yes

[eager harbor]

@trim pivot has leveled up! (7 ➜ 8)

[trim pivot]

That's cool. It's nice that the VB series gives you the option to customize the band to whatever you want.

[hollow drum]

FYI, in the Cut Ins for the Dinosaur Roar DIM (Digimon Link Download Pack\Graphics Pool\0. Box Promos\6. Dinosaur Roar\Cut In) files 6 and 7 are mislabled as each other. Greymon (Blue) is in the 6th slot, but the cut in labeled 6 shows Dark Tyranomon (and vice versa).

[trim pivot]

The swap was noticed earlier by another member and has since been corrected. It'll be reflected in the next update packet once it's uploaded and pinned by a moderator.

[true light]

I’m so ready to mod the shit out of mine mannn the base device is very barren without the app

[eager harbor]

SHINKA!

@true light has evolved into Baby I!

[dusky birch]

VB Arena is still functional

It needs to be uninstalled and reinstalled at this point due to the window for offline conversion passing

[brazen frost]

Quick question if anyone is on right now, I am starting to mod right now and am not sure about something. Do I put the whole diver folder (that was in the dim tool zip) into the programmer I put together or do I only move the files that are in the folder?

Is DRVSETUP64 the driver I need to install?

[eager harbor]

@brazen frost has leveled up! (0 ➜ 1)

SHINKA!

@brazen frost has evolved into Baby I!

[dim magnet]

There's no file management involved? Install the driver and then you can use whichever program you want dump and restore Dim data

[brazen frost]

I have never had to manually update a driver so I am not sure how it's done, I assume that drvsetup64 is the driver I need to install but in the dimcard tool guide it says 'go to the folder where you unpacked the zip and install the driver' my confusion is that there is a folder called driver.

The drvsetup64 is in that folder so I just wanted to be sure I am just using that or the whole folder

[cloud dock]

i had problems to find the small sd card for the CH341, so i bought de big one hoping it is just break the board until is small enough to fix the dim. but removing the metal part and break the board make the connection the most frustrating thing of my life. it works, but only after 50 attempts of connection

[dim magnet]

Go to Device Manager, find the programmer, and right click and use the update driver option

[dim magnet]

You can usually see whether slot is short enough in product photos. You can look of Amazon, AliExpress, eBay etc.

[brazen frost]

So the driver is updated and as far as I can tell the device is wired correctly but it fails to read dims will include images

[dim magnet]

Double check that the mode jumper is set correctly

[brazen frost]

I am not sure what a mode jumper is, I am assuming it is the lever at the back of the board, I disconnected and reconnected the board with the lever in each position, still wouldn't read a dim

[dim magnet]

There should be another set of pin headers on the other side of the socket. You should have a jumper between positions marked 1 and 2

[brazen frost]

I think I see what you mean

I assume the yellow bar on the 1 & 2pims is the jumper

[dim magnet]

Should be right. Maybe the Dim's just not making contact with the slot

Are you sure it's a short slot?

[brazen frost]

I believe so

https://a.co/d/j4QxSZ1

Okay so I feel kinda stupid, my short board must be different from the one in the mr.blinky tool because the dim goes in facing the other way. But now I have a different problem, as soon as a dim goes in the device is no longer detected

[dim magnet]

The direction seems right

[brazen frost]

Okay I feel dumber, the way I have the device setup is confusing my brain so I have been putting it in upside-down this whole time, but now that I am plugging it in correctly it is making the whole device disappear even in the device manager

[dim magnet]

The contacts face down when you insert it, i.e. faces towards the PCB

[brazen frost]

Yeah I see that now, I guess I kept doing it that way was because it would disappear from the computer if I did it the other way

Now my pc just does not see the device when a dim is plugged in correctly

[hollow drum]

You have the driver installed, yeah?

[brazen frost]

Yes as far as I can tell, without a dim the pc recognized it but as soon as a dim goes in it is disconnected

[brazen frost]

Solved it, I plugged the sd reader in backwards

[eager harbor]

SHINKA!

@brazen frost has evolved into Baby II!

[lusty sorrel]

So does installing the mod still allow the VH to connect to the arena app for storage?

[dim magnet]

Yes

[lusty sorrel]

And from what I understand the mod can be undone at anytime with the back up/restore?

[dim magnet]

Yes

[lusty sorrel]

Awesome thank you

[round idol]

Gave +1 Digi-rep to @dim magnet (current: #2 - 524)

[cloud dock]

i made a huge mistake, and unfurtunaly deleted my wolf howl and vs dims bins
does anyone have it somewhere?
but the good news is finally i installed the mod

[trim pivot]

Sorry to hear that. Unfortunately we cannot help as sharing official Bandai bins goes against the Digi Hatchery rules.

[cloud dock]

its ok, ive bought the second VH to use it to repair my BE, i will get again the same dims, and use it to restore the old ones. hope it arrive soon

[hearty cape]

ayo so like, hypothetically, what would it mean if theres a warning sign nexts to my digimon on the home page? hypothetically

[trim pivot]

It means your Digimon is in an inactive state, where its vitals and mood will slowly drain.
If the HRS doesn’t register a pulse, you take your watch off, or you’re sitting without moving your arms, it may trigger this state.

With the Praise function (which gives your Digimon +250 VP and +25 Mood), it’s no longer a major concern, as the inactive state only causes a loss of 20 VP and slight mood lose each time it’s registered.

So, hypothetically, if your Digimon stayed inactive for a full hour, it would lose around 240 VP, which is the equivalent of one Praise (+250 VP). It may even be less than that if the watch registers active status between in actives within that hour.

With Praise, you can safely ignore that warning for a couple of hours and still fully recover the lost VP and mood. Using Praise to restore lost vitals is similar to feeding a V-Pet whose hunger is constantly dropping. Just be sure to check your mood meter before Praising to see if it's full, not doing so could get you a penalty.

If you want to remove the inactive status ASAP, try recalibrating your heart rate, taking a short walk, or shaking your device.

[mild iron]

Does anyone know where on the chip is the ground. I'm trying to solder a c type port to the board but I don't know where a good place to solder the grounded wire to. I've checked online but it only shows v and be. I don't know if the chip is different from the vh

[frank parcel]

Hi, I am using the Digivice version of this mod and working on a custom DIM shown in the picture and bin file attached below. After I get Wormmon to 1000 or more vitals and try to evolve him, he evolves to Stingmon. Shoudln't he evolve to Gumdramon now, as per the rule I set in Transformations? What am I doing wrong?

Or are stages linear, meaning stage 3 can evolve only to 4 and not 5 or 3?

[vast trout]

I might be wrong, but the top evolutions might have priority over any new additions at the bottom

Technically, you've already met Stingmon's conditions

[frank parcel]

oh, okay, I get it, so the order should be reverse you mean, first 1000 ones, then 750, then 500, then 250 and 0?

I will try this and tell you, hold on

[frank parcel]

You were 100% right, reversing the order solves the problem and makes the evos work as I wanted. Thanks!

[round idol]

Gave +1 Digi-rep to @vast trout (current: #151 - 10)

[frank parcel]

What exactly is Attribute Fusions?

[frank parcel]

Is there any short cut to reduce vitals directly to 0? I think using Scold too much can cause the digimon to die, right?

[trim pivot]

Attribute fusions are Jogress/DNA evolution settings. When you have a digimon with a certain attribute in the capsule it will prompt a jogress evolution after a period of time. square is Vaccine, triangle is Data and circle is Virus. So for example, you currently have it set so when a virus Digimon of the same level is in the capsule with the Digimon you have selected it will jogress into Pucchiemon

There's no instant way to make vitals drop to 0 and ya abusing the scold function can lead to an injury and you get 4 injuries in one day before your Digimon dies.

[frank parcel]

I see, okay, thanks

how many times can I consecutively use Scold without getting an injury?

I think it would just make things easier for everyone if there's an option to enable/disable cocky-sleepy moods

[trim pivot]

What influences an injury from scolding is implied in the manual. I'd rather not spell it out here and potentially spoil things for those who enjoy discovering a game firsthand. I designed Digimon Link to encourage experimentation and exploration. If you don't want to read the manual, you can always experiment and see what happens. Nothing is random in Digimon Link with some observation and trial, anyone can figure it out.

[frank parcel]

By Manual, you mean the Research Notes pdf in the zip file, right?

[trim pivot]

Yes, Also, I respect your input. With that said, I designed the gameplay like any standard game, with rules and structure that reward or punish the player based on their actions. If every function could be turned on and off at will, it would be less of a game and more like a remote control. The fun is learning how your actions shape your partner's behavior.

You can toggle 'Cocky' on and off, but not in a straightforward, mechanical way like pressing A or B. Instead, it happens intuitively through your decisions in the game. Like I said, experiment. Here’s a clue: To toggle it off, think about what you do to an arrogant person in real life who needs correction?

[rigid linden]

You delete them and get a new egg ofc

[ivory kettle]

Is there a way to get the 24hr clock back?

[dim magnet]

No

[brazen frost]

I am having trouble getting digimon from the app back onto the vb, so I loaded up the app with the some baby's to send them off for items, now that I have some rookies and champions I want to move my baby's back and raise them up, but every time I try to send them the vb starts to connect but then switches to asking for a dim. I already lost one on a failed transfer.

[dim magnet]

Well did you insert the Dim?

[brazen frost]

Yes and I just got a new digimon and the one I tried to transfer was lost

[dim magnet]

Sounds like you're doing it wrong

You shouldn't be getting a new mon when inserting for a transfer

Maybe you're taking too long and it's going back to the idle screen?

[brazen frost]

I think that might be it, the scan times out or something, I had no issues doing back and forth transfers before when I was testing it out and learning the functions but now it just seems to be finicky

[eager harbor]

@brazen frost has leveled up! (1 ➜ 2)

[sturdy heart]

I just got my programmer in the mail! before I start I have a question. Is the next version close to release? If I just have to wait a few days or so I wouldn't mind

[dim magnet]

Probably still going to take a while. Not a big difference either way, you just have to uninstall the old version before installing the new version

[sturdy heart]

thank you! making my backup now. so far its all going smoothly

[sturdy heart]

does the training gear take custom DIMs?

[dim magnet]

Yes

[sturdy heart]

ooh

[vast trout]

The customs based on more recent Dims do throw up sprite errors when put on a VS Memory though

[dim magnet]

That's not specific to the mod

[sturdy heart]

gotcha. So if I have multiple impulse city that should get around that. I can designate an impulse city as the mod mule lol

[rigid linden]

If youre making your own mods thats great, but its what the mods are based on not what you write them too. So if someone uses let's say a ryudamon dim to make a custom dim, even if you write that to impulse City the sprites could mess up on a vs dim because youre using the files for a modified ryudamon dim

You can check custom dims in dim modifier to see if they will work with a VS Dim

[dim magnet]

Then just transfer the sprites and data to a different base

Or copy over the header from a known good ID and recalculate the checksum

[sturdy heart]

I was gonna buy this one https://ko-fi.com/s/f3904405d0

[rigid linden]

(I dont know if Ryudamon is an incompatible dim lol, the ID's are the important part)

[sturdy heart]

the bin, not a real card

[rigid linden]

Unfortunately I have not bought that so I have no idea if its compatible

It claims to have a new ID so Im gonna guess it wont

You'd have to back it up and do what Cyanic just recommended

[sturdy heart]

can all that be done with Mr blinky's tool?

[rigid linden]

You want to get Dim Modifier by cfogrady

Its another piece of software for actually modding Dim card files

Mr Blinkys tool is just for verifying, unlocking, writing to, and backing up dims

[sturdy heart]

gotcha. I just found and dowloaded it. Why does it want BE firmware?

[rigid linden]

I forgot it did lol. Maybe it makes it easier to read them? I couldn't tell you why off the top of my head

I know Bandai has an official page to get BE firmware, but in humulos's BE manual he also has a link to it

[dim magnet]

It uses sprites from the firmwware

The Dim modifier, specifically

[sturdy heart]

ah gotcha

so a custom dim with a new ID probably wont work with the digimon link mod? I will have to rip the sprites from the modded DIM and make a new DIM with a old and trusted ID?

[trim pivot]

Yes and change the stats

A Custom DIM with a new ID will work, just have a visual glitch in VS DIM battles

[dim magnet]

As mentioned before, this is not something specific to the mod. It's a side effect of the sprite packing workaround so it doesn't break the sprite signature on an existing non-legacy Dim

[sturdy heart]

wait, so using the custom DIM as is will only mess up VS DIM battles?

but not much else?

[trim pivot]

Yes

[sturdy heart]

oh okay

[dim magnet]

It obviously won't load the same mon as what you have on the card into the app, but that's pretty much it

[trim pivot]

A custom with an incompatible new ID

[eager harbor]

@dim magnet has leveled up! (67 ➜ 68)

[trim pivot]

And the VS Battle will play out like normal. Just the images of the custom DIM with the new ID will be glitchy. It's more of an inconvenience than a major error

[sturdy heart]

I might still do a custom DIM, but I am glad it wont mess with the Training Gear

[mossy tundra]

i have a question, how does not having pulse impact your gameplay?

because in that shell you wont be able to get pulsations right?

[sinful python]

The vital bracelet has a horrible sensor it’s easy to bypass it. Most of the time just the reflection from inside the shell works fine. You can add a reflective sticker to. I have been using a shell mod since the vital bracelet was released so I play the device differently then most once evolution requirements are reached I sleep the mon.

[mossy tundra]

so the reflective sticker works fine with this mod specifically?

digivice mode i guess?

[candid thistle]

that is interesting 🤔 a specific type of reflective sticker or anything works=

[trim pivot]

Yes, reflective tape works the same on this mod as on any other VB. Digimon Link keeps all the stock features intact and adds several new ones designed to complement the original firmware. So anything that works with the original VH will work with both versions of the Digimon Link.

[mossy tundra]

awesome thank you 🙂

[frank parcel]

Hi everyone, is there any way I can make changes to the digimon link mod itself? Are there any resources about making our own Vital Hero mods shared anywhere?

[trim pivot]

Digimon Link is a commissioned mod that includes my original artwork and game design concepts. While it runs on Bandai’s platform, the creative elements inside visuals and mechanics, are my own. Like any piece of art I create, I don’t consent to others modifying it or distributing altered versions that include my original creative work. You're absolutely free to create your own Vital Hero mod from scratch, but altering or reselling Digimon Link goes against my consent. From the start, my goal was to share this with the community for others to enjoy for free, however making changes to Digimon Link goes against my consent.

[wanton creek]

I have a question, but it seems that someone has mentioned it before, which is the system font. Under the influence of a light background, the white clock font will become inconspicuous. Is it possible to add a dark border to the font?

[trim pivot]

We're working on solutions to UI readability in the next major update. One will be to include an univerally UI compatible Wallpaper.

[wanton creek]

Looking forward to it

[timber cloak]

Quick question: if I unfortunately end up losing my vh, is it still possible to get digimon from the app with a fresh new vh?

[eager harbor]

SHINKA!

@timber cloak has evolved into Baby II!

[dim magnet]

Yes

[timber cloak]

Oh, great

So the “save data” of the dims I completed stays only on the app?

[dim magnet]

The entire save data of the mon is captured over NFC, and the app stores that

[fluid owl]

All parts to build the reader are in! Time to build it

[fluid owl]

so the Dim reader is in and built properly. The Dim modifier asks for a BE firmware..does this matter for Dim cards?

[dim magnet]

If you're going to edit Dims, yes. It just needs it for some system sprites

[fluid owl]

gotchya, how do i get the stock firmware from the VH?

[dim magnet]

You don't. It wants the BE firmware

[fluid owl]

oh no i mean for the VH to install this mod.

[dim magnet]

You don't. It patches what's on device

If you want the mod itself, download is pinned

[fluid owl]

yeah i got the mod downloaded and i'm still debating digivice or og evo method.

[trim pivot]

Having the stock firmware ( restore file ) only applies When you want to apply an upgrade or revert Digimon Link to basic firmware.
For right now all you need to do is load a DIM with the Digimon Link version you want.
During the installation the patcher will create a restore file on the DIM. That's what you need to backup and save unto your computer. It will be needed for future updates or if you want to revert your device to stock settings.

[fluid owl]

Oh that's awesome okay cool

[timber cloak]

How can I apply the new egg and cut in sprites?

[dim magnet]

Manually adjust in Dim modifier on the Dim you want them on

[sturdy heart]

How does the Digivice mode react to DIMs with 2 child level?

[dim magnet]

It reverts to the child that you raised

[sturdy heart]

thats rad!

[dim magnet]

Or was it adult

I can never keep the dub and sub phases straight. It's phase 3

[sturdy heart]

gotcha

[frank parcel]

Okay, understood Sir. Still, thanks a lot for creating such a wonderful mod!

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #80 - 23)

[frank parcel]

I got into Vital Bracelets soley because of the digivice version mod you made, which allows to switch evos. Otherwise, I have never been fond of vpets. Really Loving your mod so far!

Also, is there any way to allow support attacks on Vital Hero?

[dim magnet]

Too much work

If you want all of BE's features, you should just get a BE

[frank parcel]

But BE doesn't have a digivice version mod to my knowledge, or does it?

[dim magnet]

You'll have to live with what you can get

[frank parcel]

😂

I guess I am fine with Vital Hero DIGIVICE, no support attack then

[finite garden]

I have seen a lot of people lament that there isn't a way to get the Digivice (evo reset) feature on a BE as its such a great feature.

[trim pivot]

Support attacks are cool, but as mentioned, they would take a lot of development time. Not focusing on them isn’t from a lack of will or effort, but from purposefully directing focus toward what matters most which is to focus on expanding the fun and unique features that set Digimon Link apart.

The goal of Digimon Link, which many of you have already seen in its originality, is to provide a fresh, unique spin on the VB series while still honoring the core aspects that VB fans love. In the current version focus was used into adding in all the various visuals, charm and functions like Praise and scold, health system, training power up ect. Now that the basics have been covered we're going more wild and even further in the next update.

So, while support attacks aren’t our focus, We have other cool mechanics planed and that same energy is being used to address various great suggestions you all have made for the next installment, and to push forward with even more new, fun and original features in the next major update. Just like Praise & Scold, Digivice Mode, and the other exclusive features in Digimon Link, we believe what’s coming next is something everyone will enjoy just as much, if not more.

[vast trout]

Suppose if there was one BE feature I'd like to know of, I wonder how doable is cross-Dim adventures (or at least just having the option to switch out for a capsuled mon's adventure)

No biggie if it ain't possible though

[trim pivot]

You’re going to be very happy with the next update.

[vast trout]

Good grief, I'm excited

[sturdy heart]

I have been having a fun time with the Digimon Link

My only feedback is that after finishing training, it leaves you at Reps. So you must press B twice to train again

Could we be left inside Reps instead, so we have 1 less B button press? That button always dies first

[dim magnet]

There's some changes planned for the training menu

[sturdy heart]

Yaay

I am away from my PC right now otherwise I wouldn't ask. How do I evolve my digimon early in digivice mode?

[dim magnet]

Hold bottom button on date screen

[sturdy heart]

Woo!

This is great

[past hull]

Awesome work! Any date (aprox) for the next update?

[trim pivot]

No exact date at this time. We're well into development and working hard to deliver one of the most engaging and fun VB experiences, but there’s still some road ahead.

[frank parcel]

No need to rush, thanks a lot for supporting the community!

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #78 - 24)

[frank parcel]

You are already doing so much for us. I really loved this mod so far and reading your message today that more features are planned has got me really hyped up!

Looking forward to the next update 🙌

I was never into Vital Bracelets before this, your mod is what got me interested due to its unique features, especially the digivice version feature. Thanks again for everything! ❤️

[frank parcel]

Is there a way to convert BEMs to DIMs and make then compatible with Vital Hero keeping the space of only 17 digimon in the BEM and deleting the remaining slots?

[dim magnet]

You can manually export the sprites and reimport them into a Dim

[frank parcel]

Yes, but that doesn't transfer the stats. So I was wondering if it's possible to make Vital Heroes a bit more "complete".

I think lower stats are the only major con of vital hero

[dim magnet]

The stats won't transfer anyway. They use different scaling, so unless you manually adjust them, you'll get balance issues

[frank parcel]

I see, got it. Thanks.

It kind of hurts my eyes to see low stats in VB arena when I transfer from my Vital Hero to the app. That's just my OCD I guess. 🙈

[dusky birch]

Not that you have to do this but if I can recommend anything in the next update a couple of the backgrounds could be slightly darker hard to read the UI for a few of them. But like I said not required love the mod.

[frank parcel]

Tbh even I felt the same way. Many backgrounds are just too bright, like the blue ones.

But it's alright I guess, I just change the background of my dim card and use that as my vital hero background.

[trim pivot]

Yes, the way Bandai set up the system with wallpapers it's easy to have UI visibility issues. Various plans are in place to improve UI visibility.

[silk willow]

Guys hello , with this , i can do the modification?

https://produto.mercadolivre.com.br/MLB-1026708098-gravador-de-eeprom-bios-ch341a-24x-25x-flash-bios-usb-soic-_JM#origin%3Dshare%26sid%3Dshare

https://www.mercadolivre.com.br/modulo-leitor-carto-micro-sd-card-leituraescrita-arduino/p/MLB46341145?pdp_filters=item_id%3AMLB4032182525#origin%3Dshare%26sid%3Dshare%26wid%3DMLB4032182525

https://www.mercadolivre.com.br/jumper-femea-femea-20cm-40-unidades/up/MLBU1444725787?pdp_filters=item_id%3AMLB3473236677#origin%3Dshare%26sid%3Dshare%26wid%3DMLB3473236677

[red oak]

Is this able to use for vital bracelet? Pls help

[trim pivot]

The long Micro SD module won't work. You will need a short one like this https://www.aliexpress.us/item/3256805115720436.html?spm=a2g0n.productlist.0.0.d9f73bc6d9vQze&browser_id=22f6c803789e4d67a54b996b88d6390a&aff_trace_key=1998fd378fa540b8990da986a23fb226-1744934136242-00291-UneMJZVf&aff_platform=msite&m_page_id=yvjhxrfkcatjsuyi19818b120cd187d0b1f526e1d6&gclid=&pdp_ext_f={"order"%3A"2749"%2C"eval"%3A"1"}&pdp_npi=4%40dis!USD!0.85!0.84!!!0.85!0.84!%402101c5b117527609182027950e3dc2!12000032551641256!sea!US!6308991491!ABX&algo_pvid=37bc0511-9710-4d0c-b861-edab23937dc8
The other two look fine.

[trim pivot]

This is an exclusive to the Digimon themed Vital Hero watches. The Western localized Vital Bracelet which is essentially a translated Digivice V. Digimon Link will not work on other Vital Bracelets because it was specifically crafted for the Vital Hero and because of the firmware differences in HEX between models.

[dusky birch]

I was wondering about that neat

[lunar lantern]

question after watching the dtathemes instructual video, what does he mean by the differences in the Digital Monster.bin and the Digivice.bin?

[dim magnet]

One resets down to child stage at midnight, the other doesn't

Child/Rookie, I keep on mixing that up with the other names

[lunar lantern]

ohh i see thats interesting, thank you

[red oak]

Oh ok thanks

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #77 - 25)

[eager harbor]

SHINKA!

@red oak has evolved into Baby I!

[brazen frost]

I was wondering if the VH checking your heartbeat every 5 minutes is something this mod could chang? When you put your Digimon to sleep your heartbeat no longer matters, so that would be 12 times an hour that the light won't drain the battery and you won't have to worry about setting it away so the light won't bug you.

[dim magnet]

Pretty sure the same logic with requiring a bit of movement before the heart rate detection is enabled is also in the VH

Let me know if it isn't. Not that there are any plans to add that, but I haven't looked at that logic recently.

[hollow drum]

I can semi-confirm that it stops checking your heart rate if you set it down for a while. The light has lit up my whole room after taking it off before bed, but hasn't done it if I've had it sitting there for a while beforehand.

[trim pivot]

That's how It works. They added it in Digivice V. Place the watch down and don't register any movement after awhile and it'll stop the HRS check light. Move it, next HRS check, light will come on again.
So if anyone wants to save a little battery or doesn’t want their room flashing green all night, place the watch somewhere it won’t get nudged or bumped.

[timber cloak]

That scared the shit out of my girlfriend the other night before sleeping. when the green light went off out of nowhere lmao

[fluid owl]

Wow one scold just took away 800 vitals...that suuuucks

[fluid owl]

I saw it before but how do I trigger evolution on the digivice mod?

[dim magnet]

Hold bottom button on date screen

[fluid owl]

This one?

[dim magnet]

Yes

[fluid owl]

How do we raise PP on this version?

[dim magnet]

There is no PP. If you want to get trophies, you do it with training.

[fluid owl]

So if evolution requirements state 15pp, is that 15 trophies?

[dim magnet]

The hard mission should just loop around and you can do as many as you need

[fluid owl]

It's been so long since I've used the VB over the be.. I don't even remember anymore

Yep! That was it thank you!

[fiery vale]

Fantastic work! It makes me regret having an og VB instead of a V. LOL
(it also a pity I chose to buy a BE some months before this mod came out, since they were both at the same discounted price, because then I cashed out more for some BeMs xD ).

[trim pivot]

Much appreciated. You would need a Digimon Themed Vital Hero not a V.
I understand how some feel that once they get a BE they can never get a VH, but If someone put the money in to get the BE, with VHs being only $11–$15 and US DIM sets around $7 (if you have access), why not go a Lil further and get both? You can alternate playing between them during different periods, which ultimately extends the life of both the VH and the BE. Neither will be under constant use, so they’ll both last longer in the long run.

[fiery vale]

The point of the money is that I payed the BE only about 20 bucks. LOL
Right now the VH is still 20 something here.

[trim pivot]

$20 was a steal lol Just wondering what area are you in? I know USA, Canada and Parts of Europe have them at ridiculous prices. Maybe Australia if I remember correctly? Just curious so I have an internal map of all the price ranges around the globe

[vast trout]

they're finally sold out on home bargains over in the uk, for what that's worth

[trim pivot]

That sucks but at $3.99 not surprised. I wonder if US will ever be so lucky

[silk willow]

Guys sorry for the question, but the mod only works im DM vital bracelet ? ( i only have digivice-v)

[eager harbor]

@silk willow has leveled up! (0 ➜ 1)

[rigid linden]

It only works on Digimon Vital Hero devices. Which are the American release of the vital bracelet

It cant work on a batman version, only the agumon/gabumon vital hero devices

[silk willow]

You have a link for me to see if i cam buy ?

This is my version, i think dont work with the mod , right?

[dim magnet]

That looks like a Digivice V, so no

[silk willow]

Ok

https://br.shp.ee/WhMc4Pk
If i buy this , will gonna work with the mod ?

[dim magnet]

Dunno, can't see that

[eager harbor]

SHINKA!

@silk willow has evolved into Baby I!

[silk willow]

In the box its like this

[trim pivot]

No that's an original Vital Bracelet Digimon. You will need one in packaging that looks like this. It has to say Vital Hero and it needs to have Digimon on it

[dim magnet]

No, that's an original Vital Bracelet

[silk willow]

Oh ok thx

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #71 - 26)

[silk willow]

https://www.amazon.com.br/BANDAI-87792-Vital-Hero-Digimon/dp/B0B27D65Z7/ref=asc_df_B0B27D65Z7?mcid=0fdcf902daf838778f0642e3642aa2e5&tag=googleshopp06-20&linkCode=df0&hvadid=709984442762&hvpos=&hvnetw=g&hvrand=863292893168348169&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=20093&hvtargid=pla-1665515589526&psc=1&language=pt_BR&gad_source=1

Like this one right ?

[trim pivot]

Yup, You're fine with that one

[rigid linden]

Yeah the digivice V wouldn't work. Depends on your country, but this is the american amazon link https://www.amazon.com/Vital-Hero-Digimon-Blue-Watch/dp/B0B27D65Z7/ref=sr_1_1?sr=8-1

Oh nice you found it

[silk willow]

Ok thanks ❤️

[fluid owl]

So if you already have a Digimon on the training gear, And you need to edit the evolutionary requirements because you made mistake is it possible to update that Digimon or do you need to move it off the device and start over?

[eager harbor]

SHINKA!

@fluid owl has evolved into Adult!

[dim magnet]

Move it off the device, restart the device, then move it back on. It'll prompt you for the Dim

[fluid owl]

I just realized that while the dim modifier specifies win %, the DIMs don't, so my super nuanced evolution plan is all messed up 😆

[ivory kettle]

I would like to clarify that the long SD module does work, but you have to rip off the top portion of the metal to allow the smaller sized DIM chips to make a connection

So if you messed up and bought the wrong ones (like me) you're not completely screwed

[dim magnet]

Sounds dangerous

[ivory kettle]

Not particularly, but I used a rotary tool with a disc

Which made it easy

[dim magnet]

Uhhhhh assembly should not require power tools

Definitely just buy the proper parts

[timber cloak]

By the link I can guess youre in Brasil like me, the Vital hero with the garurumon dim is around R$114,00 on amazon and it supports the mod. I bought one last month

[timber cloak]

https://www.amazon.com.br/BANDAI-87792-Vital-Hero-Digimon/dp/B0B27D65Z7/137-3325584-8592824?pd_rd_w=wJlI1&content-id=amzn1.sym.1cf25150-063e-419e-86a9-17ce508bc218&pf_rd_p=1cf25150-063e-419e-86a9-17ce508bc218&pf_rd_r=GZ88QBKTH84G8JJ84FKR&pd_rd_wg=o5ZA1&pd_rd_r=e9e94cd5-91ff-45d3-9b13-542f4d414034&pd_rd_i=B0B27D65Z7&psc=1

it seems to be R$136 now tho

[ivory kettle]

Well, yeah, but sometimes you get the wrong part and don't want to wait.

[ivory kettle]

Yes this will work

[raven hornet]

Will the VS card not receive the training bonus? If so, will it be a great advantage to use the trained AP bonus to fight against friends? It seems that the party sent into the VS card is more vulnerable.

[dim magnet]

I didn't change anything on the VS data side, so no. Feels a bit risky to try to mess with that

[trim pivot]

I want to clarify something. I just had a conversation with Cyanic about the VS Battle logic to clear things up based on the two comments I just saw above.

Before launch, I asked a couple of times, once while writing the manual, whether Trophy Power would be fully carried over in VS DIM battles, as I hoped to see Digimon Link used in competitive and tournament play. I was assured that Trophy Power would carry over, but without the caveat that it only the main player's Digimon will receive the Power, not the other opponents opposing Digimon in VS DIM battles.

So to make it clear: both players will receive Trophy Power on their own device during VS DIM battles, but not the enemy Digimon from the other player, even if they are also using Digimon Link.

I'm sorry for the misunderstanding and would have communicated this earlier had I known and been given the full explanation, which Yibitasi was just given. Cyanic didn’t have the full context of my question when the feature was initially discussed.

In the next update, I will change the manual to reflect this new knowledge. Thank you.

[raven hornet]

I'm not sure if it's feasible. Maybe there will be a switch to reset the trophy to zero in future updates?👀

[dim magnet]

I think we'll have to think about it. Not applying the extra stat boosts for VS is probably more feasible than trying to store and apply bonus values from the VS Dim.

[raven hornet]

Oh, that's really great. Thank you😊

[eager harbor]

SHINKA!

@raven hornet has evolved into Baby I!

[true light]

what is the diff between the Digivice bin file and the digital monsters bin?

[dim magnet]

One resets to child at midnight

[true light]

I see what one dosn't ?

[dim magnet]

And allows fast evolution

Ver. Digivice is the one that has the feature

[true light]

makes sense.

curious. I assume by adding this to the VS dim id then need to add my dino roar dim BACK into the device?

[dim magnet]

Not sure what that means. Unless you've moved the mon out to the app, the data stays on your device and it's basically an evolution back to child

[true light]

sorry im new to this. im ive wiped VS dm and added the mod to it. thats now onto the device after reset.

I assume to then load a mon i need to add a digi dim in yeah?

[dim magnet]

Yes, loading a Dim still works the same as usual

[lunar lantern]

does the dim or vs mempry you use to dow load the firmware onto the watch have to come with the watch? or can i put the digimon link firmware on 1 vs memory and patch 2 different watches with it?

i remember hearing something about matching ids or something

[dim magnet]

Any Dims work, but once you install the patch, you need to keep at least a copy of the data from that Dim so you can uninstall later (which is required for updates)

If you want to patch a second device, make a backup of the data and write a fresh copy

[lunar lantern]

perfect, thank you

[true light]

Guys… if you’re on the fence about this mod.

Do it.

This is how I THOUGHT the device would be like. Or as close to that as realistically they could have done but didn’t.

Great work to the devs

[red oak]

got a VB original rollup mod?

I asked chatgpt and have

Where tho

[ivory kettle]

Look at the pinned message.

[trim pivot]

VB original Rollup mod? The only mod for the original VB is the Upgrade Memory, it's a paid mod that's 17.50 USD and it's sold out permanently.

In the future please refer to all non Digimon Link mods and questions to #modding_vpets

That way we can stay organized In consideration of everyone looking for Digimon Link info and for those looking to talk about it. Thank you

[frank parcel]

Hi everyone, quick question. In the youtube video tutorial, @sinful python says that the VS Memory gets a backup of the original Vital Hero firmware after the mod is applied. After I applied, the mod, I took a backup of the VS Memory that got the original firmware and kept it on my machine to keep it safe for future updates. Now my question is, can I use the same VS memory for pvp between two Vital Heroes? Or do I need to do something like backing up an unused VS Memory and restoring it to this VS Mem that has the original firmware.

[eager harbor]

@frank parcel has leveled up! (7 ➜ 8)

[dim magnet]

You need to restore the original contents of the VS Dim to use it as a VS Dim

[frank parcel]

Okay, actually I didn't backup the original VS DIM before modding. Will it work if I just backup another unused VS DIM and restore it to the VS DIM I used for modding?

[dim magnet]

Yes, they all have the same content

[trim pivot]

Yes, that'll work

[frank parcel]

Great, thanks for confirming you guys!

[lunar lantern]

with the dimcard tool, can i modify evo requirements? i want evolving to take more effort, more trophies per evolution, more battles needed, more wins needed etc

maybe more time even

[dim magnet]

If you're talking about the Dim editor, yes

That's a question for #modding_vpets though

[lunar lantern]

oh right, will take my questions there thank you!

[crystal cairn]

Hi guys, sorry if you already answered this but for the Dim modifier would I have to buy the parts to build it or can I buy one whole? If I do need to build it is there a how to guild to building one?

[eager harbor]

@crystal cairn has leveled up! (1 ➜ 2)

[dim magnet]

You can do either

Suggest using search in this channel because it has been mentioned a few times

[crystal cairn]

gotcha thank you

[trim pivot]

You can also find a direct guide for different DIM modifier options and what you’ll need in the manual. It walks you through everything step by step. You can find the manual right here in the Pins.

[crystal cairn]

Thanks again. I'll try and see how it goes

ok, I searched up the parts for the dim modifier on amazon. Is it ok if I share the link here to get a confirmation if it's correct?

https://www.amazon.com/Programmer-Module-CH341A-Burner-5V-3-3V/dp/B07PFCJ8G9/ref=sr_1_1?crid=1YKEF63EPQ9I4&dib=eyJ2IjoiMSJ9.JgxE3oSg5RUaA7Qp7FGrTwyhbv4nf_JvsrdM6NLeqJOaJkvAXiJpkW-LY8rma-Xdi_yjrKBNmHAwiSt4VkdDoUr6aCUaG3em-955huYFlqbgl4nlDh4QWh7APx4fzr6JNw1Hg2juj7OJyV1jMXTxRDQNgu5XdzDbyyB0FmouK1glawmKo0k2jNh9MX6Al0liUTN6KzApm-fYzDTw9yxMk6HU5176jZVUP4utchKrhH-vgfESt_BDw7zL63ahfxanhwkHi-5d9JnJLXNcpsT23hF8BONNxba6DUJ_fAnlOGE.qg94n6KSKqPep305r2JtZEdub1569bA9T0TrWqpbBuQ&dib_tag=se&keywords=ch341a+mini+programmer&qid=1753552477&s=electronics&sprefix=ch341a+mini+programmer%2Celectronics%2C73&sr=1-1

https://www.amazon.com/WWZMDiB-Module-Adapter-Memory-Shield/dp/B0BV8ZQ81F/ref=sr_1_1_sspa?crid=5VB4AJSOEOQ1&dib=eyJ2IjoiMSJ9.OAlGUxjvwoH_VKk6WLDBZij7o24g5BmMNYrFGGaANH2y_Eu8Wf0sjCgxy8Ic3XssR7rAu2xAcZpmOfTJwsemtg_7WFanVGsHUawPol9-Sww1iGDvPyIbpOTBvp7zor85JUvrK79cgpV1hFW91vbobpgErIc011Osa6JPXhZiXt4FQx4iWcn3PeFF7wvM-25jOvWLS1RzvtE834ifSH1Yx2uxDD9BaXZDzfh3e5Sj0x1pSgkIXiThP9Ozxa2wQProCQy0Z7rz6Qv2MRAF68U63p_-rPnG9vyxw2K5Bsue1J0.1237jlmfOXNvRaeDYLFkTjNiDyc5d3ddJUvAP8KWBWE&dib_tag=se&keywords=micro+sd+card+module&qid=1753552408&s=electronics&sprefix=micro+sd+card+module%2Celectronics%2C108&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1\

https://www.amazon.com/California-JOS-Breadboard-Optional-Multicolored/dp/B0BRTJQGS6/ref=sr_1_3?crid=150QZSR71HO1F&dib=eyJ2IjoiMSJ9.zbKttyaTJORteMERh4nfEdNnX4bamHrCLekfBY1mCn8vnGICWOjbUWHopJGGizyIm8vlWiWp45IIfCtJT02qqvRw1ofGDwUnJaPjQ9BFTLfjj9tkT4ZVZGbFtVfQZUwYzNphLbTSxEr8oHSjWpI7A-lDIal0-1D923KrTlU-Op7NUJg2OWnngDRkiqodiQ-MvoNtT9X2dIIxNxxaGXZZ2nCQ0Lg_TKkW6njbOjpGLnc.tnWkHxMRHRGrtgvi_YNShjxnLFbLmqc4o6H35QmpKEg&dib_tag=se&keywords=jumper%2Bwires%2Bfemale%2Bto%2Bfemale&qid=1753552630&sprefix=jumper%2Bwires%2Bfemale%2Bto%2B%2Caps%2C63&sr=8-3&th=1

Would these parts work for the modifier?

[dim magnet]

Reminder as usual that CH341A is garbage and you should get something better

Use a CH347 or better programmer

[crystal cairn]

Thanks

https://www.amazon.com/CH347-programmer-module-EEPROM-supports/dp/B0C7MHTMSC/ref=sr_1_2?crid=1MPELZWAL0RE&dib=eyJ2IjoiMSJ9.B2XiYJx8lC2P__VN_cnQtBPwL-l5L-q7NR6WnmQUIGE7c3udanAC5LaRL9Am4xxQn-ImZhAyL4jGLi3WpyI4Em-tcOO0yVB8iSL0e4dT4Jhrc9qrAqIsygpNo1vKcs3QM9TvPb04WBD1wq7S216Xa3LIUWavz3ZEm1mT3p7igBJs9ls1nQNGdjI_zh5U5-yIrU9lNXJbBnMRlFZKES_3hmPg3RcfIpEc6ultzukcIMhzaW03w1Jm83V4SLI4RIRtal3tVbZHBW66CnUE1w-Hww0Q_GGRiYSVgDi0dldio5M.3voGpCEoZQmDfFLFyaUiQBliKX8DXtoFGHKb59Kqtsg&dib_tag=se&keywords=CH347&qid=1753554010&sprefix=ch347+%2Caps%2C95&sr=8-2

Assuming this one then

[dim magnet]

Sure

[crystal cairn]

Thanks for everything! I'll let you know how it goes

[frank parcel]

Why do you say it's garbage? It works fine for me

What does CH347 do better than 341A?

[dim magnet]

Just because it seems to do the job doesn't mean it is the best one or not doing something undesirable in the process

For CH341, the common programmers you can get for cheap tend to have a PCB error that causes it to apply out of range voltage to the target. While it's not high current and things still work fine afterwards, you don't want to make a habit of doing that to the chip

It's also extremely slow, and lacks safety measures that other better programmers have, mainly in overcurrent protection and not powering things until it's actually needed.

[frank parcel]

Oh, I see. So it makes a difference hardware wise, but software wise everything works the same?

[frank parcel]

Ah, I see, got it. Thanks for explaining

[round idol]

Gave +1 Digi-rep to @dim magnet (current: #2 - 529)

[dim magnet]

If you have one, you can use it if you're not too worried about the overvoltage and can be careful around it, but it should not be purchased for new builds

For the most part people just repeat what they see from other guides a lot and not really evaluate why something's picked. CH341 happens to be cheap and plentiful, but now with better programmers available, it really should be avoided.

[frank parcel]

You are right, even I just blindly followed the guide. But thanks for enlightening me. At least for future projects I know better now.

Though I am done modding all dims I want and so mostly taking a break from nodding for a while. That is unless someone does something too epic like modding digivice color or D-3 color XD

[trim pivot]

Just to clarify to everyone why the CH341 is in the current manual: I reached out to Cyanic while making the manual to see if he would like to recommend any programmers. He said if the DIM can plug into the programmers it should be fine, so the CH341 was only included. His views have changed since then, based on new insights and time. This will be reflected in the updated manual, along with suggestions and guidance on where to get the current Cyanic recommended programmers as well the current ones.

The CH341A has been reliable for many and has not been shown to cause harm when used for the purpose of modding DIMS. I myself haven't had issues as well as many others on this thread and in other modding spaces for many years.
That said, I respect his concerns.
I want to clarify that I wouldn't include something in the manual that wasn’t recommended or that I hadn’t personally tested over a period of use. I value quality and transparency in everything I do and the manual is a source of information you can trust.

[proud pond]

Hello, I have a question about the mod, more about a feature that I didn't find being mentioned.
I wanted to know if anything changes in the adventure mode of vital hero, if it stays the same or if the steps we have to take have been reduced.

thanks 🎶

[dim magnet]

Since nothing was mentioned about it, it didn't change

[proud pond]

thanks

[trim pivot]

If you want to tinker with Adventure Mode settings yourself, you can use the same program (Cfogrady's DIM modifier) used to insert the PNGs from the download packet's graphics pool. With it, you can change the order of who appears in Adventure Mode, edit the number of steps required per enemy (you could set it to just 1 step or even 5,000, hypothetically), and even adjust the stats of the Digimon you fight.

Also, there’s one “minor change” the Digimon Link mod makes to Adventure Mode that’s actually a major improvement for me: when you battle in Adventure Mode now, it no longer defaults to the standard VBDM battle room. Instead, the battle wallpaper reflects the DIM's wallpaper you’re currently using. It may seem small, but for me it makes things feel way more immersive and fun than always fighting in the same old chamber.

Plus, since the BE version defaulted all DIM battles to a VB character’s wallpaper, many of the classic DIM wallpapers were never visible during battle. With the Digimon Link, they finally are for the first time.

[proud pond]

hmmmm

I'll research more about that. thanks. 🤗

It's the first time I've tried to do something like this, so I don't want to mess around too much. If I find it difficult, I might leave it as is, but I'll search to see if anyone has posted a written tutorial or video.

[round idol]

Gave +1 Digi-rep to @trim pivot (current: #66 - 30)

[trim pivot]

Taking your time is totally understandable and being prepared is always the best mindset. Just to ease any worries since this is all new, the tool is actually really user friendly. The creator did a great job making it intuitive, it’s mostly point and click, and everything is easily reversible. There’s no way to brick your DIM or VH.

You can avoid going to far when you’re ready to mod, just make sure to save a backup of your original DIM file. That way, if you change too much and want to start fresh, you can just go right back to where you began.

[crystal cairn]

ok got my parts. Wish me luck

[crystal cairn]

Think I got it

[crystal cairn]

Ok got it!

Thanks for everything guys!

[trim pivot]

Man you did that in one night, you definitely set a record 🔥 Have fun

[crystal cairn]

Had to. I was too excited to wait!

[lunar lantern]

not sure if this has already been said but i just noticed tsunomon's name is mispelled in the special font the mod comes with, on the wolf howl dim

[wanton creek]

The two names in the upper left corner are the names displayed in the official website illustration

[trim pivot]

Ya, I used the official translated Japanese names. If you'd like to use the Dub names I provided the font used in Digimon Link in the graphic pool.

[lunar lantern]

oh i didnt even know it was also spelled like that, i only ever saw it with an s

[trim pivot]

Understandable, I thought I knew all the JP names and I myself was surprised when I came across some of the official JP names like Mermaimon and Tyranomon when making the names for the graphics pool.

[hushed fjord]

What does this mod add? And can i use the vs dim normally to fight someone with modded djms stuff or just regular ones atleast?

[dim magnet]

Try reading the top of the thread

Dims work as they always have

[hushed fjord]

So i can just fight others even with modded dims then,i see

[wanton creek]

#modding_vpets message
In addition to the 19 IDs mentioned in this article, custom DIMs made with other IDs will have the same problem

[sacred mantle]

so this thing lets you add... pretty much whatever you want?

[dim magnet]

That's the Dim modifier. This mod doesn't have much to do with the content of your Dims

[sacred mantle]

so what's this do?

[dim magnet]

Look at the description at the start of the thread

[sacred mantle]

so it's just a general overhaul, more graphics, more systems

[trim pivot]

It’s more of an original take on the VB experience, not just a general overhaul or QOL upgrade. While it does include new graphics and systems, the goal was to reimagine the overall vibe and flow rather than simply upgrade parts.

With the help of Cyanic Implementing my blueprint into code, my focus when creating Digimon Link’s was, and still is, to build a more engaging and immersive experience in the VB series by making the Digimon feel more alive and your connection with them more meaningful.

This is accomplished by adding a variety of traditional nurture and care elements to the VB, such as:

Seeing your Digimon’s happiness level

The ability to praise or scold them

Introducing a health system (they’re no longer indestructible)

Manually healing your Digimon like in the classic V-Pets

Showing your Digimon getting sleepy

Ect

These are all immersive additions designed to deepen the bond between player and Digimon, without disrupting the key mechanics that VB fans already love.

[trim pivot]

Yes you can definitely play and fight others with modded DIMS.
As mentioned if you do plan to make your own custom DIM there's a list of recommended IDs that you use to avoid a minor visual glitch In battle. That's not originated from Digimon Link but from the source system.
This graphic clearly explains what we're talking about.

[vast trout]

copying over this list of usable dims

0 IMPULSE CITY
1 TITAN OF DUST
2 INFINITE TIDE
3 HERMIT IN THE JUNGLE
5 NU METAL EMPIRE
7 ANCIENT WARRIRORS
8 VOLCANIC BEAT
9 BLIZZARD FANG
12 AGUMON
13 GABUMON
14 BLACK ROAR
15 SHADOW HOWL
19 GUILMON
20 IMPMON
21 RENAMON
22 MONODRAMON
27 MAD BLACK ROAR
28 TRUE SHADOW HOWL
31 MEDAROT

essentially the newer dims'll cause issues

[trim pivot]

Beyond what any feature write up can convey, what this mod really adds is the same warmth and immersion you’d find and enjoy in the classic raising V-Pet series. The VB experience here is focused on strengthening the engagement and bond between player and Digimon. It does it all without messing with the core gameplay that VB fans have come to enjoy.

You can check in on how happy your Digimon is throughout the day. You can essentially “pet” them using the praise function, or guide their behavior through scolding when necessary.

The overall goal is simply to make the experience more immersive and fun. The mod comes in two versions , one of which is a spiritual callback to the Pendulum Cycles, where your Digimon de-digivolves to Child level each night. The other plays as the standard tradition VB and Vpet experience where your Digimon stays evolved.

[trim pivot]

Thanks for that clear list. I'll add that list to the ID tutorial inside the next Updates download package.

[round idol]

Gave +1 Digi-rep to @vast trout (current: #138 - 11)

[hollow drum]

In case it hasn't been reported yet: in the Impmon GP graphics pool, Yaamon/Yarmon is typo'd to Yarnmon

(just checked the reference book to make sure that's not a spelling i just hadn't heard of)

[trim pivot]

No you're right. It's not Yarnmon, Though, it does sound like it'd be a fitting addition to the Shoemon line. I'll have that taken care of in the next update packet.

Also, while playing the Renamon DIM today, I discovered that the name PNGs for Taomon and Sakuyamon are swapped in the Renamon Tamers EX name graphic pool folder.

If anyone's looking for Taomon, it's currently listed as number 13, and Sakuyamon is number 9.

This will be fixed in the next update packet, where their filenames will be renamed to match the correct order as shown on the DIMs.

[broken raptor]

hola a todos, este mod, se podria instalar en el vital bracelet original? o si se puede colaborar para crear una version para ese vital?

[dim magnet]

The mod is only available for Vital Hero, and no current plans to port it to any other version

[broken raptor]

ok, gracias ;), veo de conseguir un VH

[broken raptor]

Hi,

My name is Pedvera, and I’ve been following projects related to both the Vital Hero and the original Vital Bracelet. I recently came across the Digimon Link mod, and I was really intrigued by how it introduces new mechanics like a health system, dynamic VP and mood adjustments, and how those affect performance in battles.

I’d love to learn more about this project and explore ways I could collaborate with the community—possibly even looking into adapting some of these features for the original Vital Bracelet.

Is there any public repository, technical documentation, or internal channel where I could dig deeper into the mod’s development? I’d appreciate any guidance or contact, even with the author, if that’s possible.

Thanks a lot for your time and for keeping this community alive.

Best regards,
Pedvera

[eager harbor]

@broken raptor has leveled up! (0 ➜ 1)

[trim pivot]

Thank you for the kind message and I'm happy Digimon Link has been of interest to you.

As far as piecemealing the mechanics or contents of Digimon Link,

I just want to clarify publicly that Digimon Link was a paid commission, and I enlisted the help of Cyanic, who has masterfully translated my game design and blueprints into code.

I'm an artist and like all my creations, This mod is a reflection of my unique style and contains my original works, from the graphics to the gameplay mechanics that make it stand apart.

Like all my art this is intended to be enjoyed as is, and I do not consent to others selling, modifying, or redistributing altered versions of this mod or the gameplay systems I’ve created.

From the beginning, I planned to share Digimon Link for free, as a personal gift to the community, created purely for entertainment and enjoyment. However having it's contents separated is not something I consent to.

Digimon Link reflects my personal vision. I request that Digimon Link and its assets remain preserved as the unique contribution that I, with the help of Cyanic, have offered to the community.

Thank you for understanding.

[hushed fjord]

Wait, does it digivolve back during the day,

?*

[trim pivot]

No, 12 Midnight

There's a function, press A on date screen, that you can use during the day to blast through evolutions before turning back at night.

[hushed fjord]

Wow

[hushed fjord]

Interesting

I guess now i gotta find out how to mod dims and see if there is an ofanimon mod

[trim pivot]

It's actually really simple. You just need a DIM modifier, You can buy one pre assembled or assemble one yourself. There's instructions on how to do it in the manual in the Pins section. The current manual suggest an older programmer model. We now strongly suggest a CH347 or if you'd like a more fast and efficient programmer theres the XGecu T48 that Cyanic recommends.

Also, here's a link to a shop with two Custom DIMS with Ofanimon, Someone was just looking for them last night. Aderek sure has some very popular DIMS 🔥 https://ko-fi.com/s/9d6f3f1f0c

[trim pivot]

Shout out to @finite garden for this sick mod 🔥
It's really cool seeing Digimon Link run on a Vital Pet, since Veak, Cyanic, and Heat's Upgrade Memory for the Vital Pet is what inspired me to reach out to Cyanic to pursue Digimon Link.

Originally, this mod was supposed to be distributed via physical card, like the Upgrade Memory. I thought that was the only option for the VH at the time. Fortunately, my Upgrade Memory for Digimon Link got lost in the mail and I say fortunately because Cyanic then told me we could use DIM modding as an install method, and I 100% prefer that approach. It's free and It also opens the door for everyone to mod DIMs, which is something I never knew I was missing out on until now, because it really is a blast.

[finite garden]

Works like a dream.

[sleek crystal]

What systems is this compatible with? I can't see any info posts in the pins, but looks really cool

[dim magnet]

Vital Hero only

[sleek crystal]

Huh, dang. Does that system use unique code or something? I thought it was just a reskin of the VBDM

[trim pivot]

Yes the firmware is different between all the models. Cyanic is programing this in the limitations of Bandai's closed HEX code. It's not the same as programing a game from scratch where you have unlimited freedom. There's a lot of IDs, Tags and firmware quirks we would have to work through to port to various models.
We're instead focusing that energy into building upon this build to continually evolve it which We're doing with an exciting update We're working on right now. Also, since we are committed to updating Digimon Link, it wouldn't be realistic to exspect Cyanic to upgrade 5 different models firmware all by himself everytime we want to apply new features or upgrades. Focusing on making one the best it can be is the most wise and sustainable

[finite garden]

@trim pivot maybe edit the title to Vital Hero Only. People seem to always miss that bit.

[trim pivot]

Training Gear: Digimon Link – VH Exclusive Mod

You’re right on that, let’s lock that in

[eager harbor]

@trim pivot has leveled up! (8 ➜ 9)

[hardy quiver]

SO after reading everything posted. Mod Looks amazing and cant wait to try it.

Downsides, I gotta somehow get the hardware to do this... everything else seems simple.

I dont have the money for the hardware since im disabled, probably wait till x-mas and ask someone to get it for me.

But anyways just wanted to say Good work! people seem to enjoy it, I got excited when I randomly saw the mod on reddit since while I do like the VH, I felt it was a bit lacking and it is the one thing that helps with me getting the exercise I need.

Though I cant use the mod immediately I will say thank you for it.

[trim pivot]

Thank you SO much. I really appreciate that Cyanic and my work on Digimon Link is of such interest to you

I’ve got my fingers crossed you’ll be able to get a DIM programmer by Christmas 🤞 Like you, the VB series motivated me to get more active, and I hope Digimon Link adds even more fun and motivation to your routine 🔥💪

[lunar lantern]

it only cost be about 5-10$ including shipping for the dim modifier parts, i ordered from aliexpress. and building it was easier than waiting tbh

[hardy quiver]

I have no income being disabled, waiting to get officially put on disability and get money every month takes years sadly. If I had the money I would, though not sure if I could build it, not good with those kinda things.

[dusky birch]

do you mean the bems?

[dim magnet]

If you want to use VS battles, there are only some Dim IDs that don't require the sprite signing workaround. The VS battle logic is very naive about how it copies out sprites, so if they're not contiguous and in a certain order it messes up.

If you don't care about VS battles, it doesn't matter

[lunar lantern]

if nacabaro gets special missions working in VB Helper will they be added back to Digimon Link?

[trim pivot]

No, that space was used to input the Coach feature for Praise and Scold.

I wanted to keep that space open for VB Helper. However it was dropped due to development constraints

[dim magnet]

I haven't actually seen how it works myself, but chances are it might still be active in the background. You just won't be able to check the progress on-device

[trim pivot]

You need to NFC connect in the old "Special Missons" section in the now training section and there's no option for that now.

[lunar lantern]

of course having both would be ideal, but i think even without the special missions its a small loss

[dim magnet]

It's loaded during the normal connect transfer, so it should just appear

[trim pivot]

That's a win then 🔥

[trim pivot]

@dusky birch Ya, if you don't VS DIM battle it won't be an issue. If you do it's only a minor visual glitch. Cyanic and Cfogrady found a way around it after 機械肥龍獸 reported the issue. This graphic will explain. To everybody , I'm sharing this again for the purpose of spreading awareness. Next update it will be in the download packet.

This is a specific list of fully functional DIMS with the proper ID provided by Shiver

0 IMPULSE CITY
1 TITAN OF DUST
2 INFINITE TIDE
3 HERMIT IN THE JUNGLE
5 NU METAL EMPIRE
7 ANCIENT WARRIRORS
8 VOLCANIC BEAT
9 BLIZZARD FANG
12 AGUMON
13 GABUMON
14 BLACK ROAR
15 SHADOW HOWL
19 GUILMON
20 IMPMON
21 RENAMON
22 MONODRAMON
27 MAD BLACK ROAR
28 TRUE SHADOW HOWL
31 MEDAROT

[dusky birch]

Oh what happened?

Like the cause specificly

Also much appreciated im keeping that list

[hardy quiver]

quick question that popped into my head, do we need the DIMS of each digimon like normal for this or is it something like you can pick from a different bunch of eggs to hatch?

[trim pivot]

It's a fluke from the stock firmware. It's from sprite logic and from some DIMS not requiring a sprite signing work around. Cyanic explains it above.

[trim pivot]

You need DIM cards that you plug in and load into the device

[hardy quiver]

ok so like normal