harsh karma
I have a Japanese v1 Digivice with a faded screen. I have already changed the capacitor and tried to apply a polarized film but I could not fix the issue. There is also some issue with the pressure on the board because some line of pixels come and go based on how tight the screws are Has anyone tested a screen compatibility with other Digivices or vpets? I am located in Italy so it is not that easy find junk digivices or replacement screens. Thank you for any help or advice
fossil orchid
Have you tried cleaning the contacts with 99% ipa
harsh karma
Have you tried cleaning the contacts with 99% ipa
Cleaned everything on the board with IPA Yes 😓
wintry ledge
You can try putting a thin piece of paper between the screens and applying pressure to the connector. If the problem is caused by pressure inside the connector, this may fix the problem.
harsh karma
You can try putting a thin piece of paper between the screens and applying press...
I will try to put a tiny sheet of foam between the plastic screen and the LCD to see if I can give it enough pressure thx
shut reefBOT
Gave +1 Digi-rep to @wintry ledge (current: #544 - 1)