#How to remove a macro ?

14 messages · Page 1 of 1 (latest)

idle smeltBOT
#

Ahoi @arctic ridge!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: https://discord.com/channels/758059413700345988/1320321898009071616

To change the tags of this post:

  1. Open the ... menu on the top right corner of this post.
  2. Find Edit tags
  3. Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Note: This is an automated message

Thanks for your cooperation!

#

Ahoi @arctic ridge!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

Discord | Mainsail

We are glad to help and chat with you on our Community Discord, but if you need help and want the best support possible you should, follow a few simple rules:

agile moon
#

Multiple ways… depending on your configuration

  • Remove the macro from your config
  • if you want to keep the macro and just hide it add an _ in front of the macro name.
  • if you use macro groups you can remove it from the group in the mainsail settings -> macro
arctic ridge
agile moon
#

send a klippy.log

arctic ridge
#

So Ive just seen it in the klippy log but have no idea where it is

agile moon
#

the config you can see in the log file is the "final" config klipper sees after all the includes.

#

so its there in one of your include files or in the printer.cfg

arctic ridge
#

I'm going through them all again..:-)

agile moon
#

🙂

arctic ridge
#

Thanks Rick..The one file I never use GRRRRRR

agile moon
#

np close your post please if you dont have any other questions 🙂

arctic ridge
#

1 question if u dont mind.. I have two macros defined to load and unload filament but neither show as a macro button. Would u b able to share your thoughts as to what would cause that !!