provok3d adxl error when installing

[eternal anchor]

Ahoi @raven sierra!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

[raven sierra]

i dont think i can show logs as im using PuTTY to SSH into my pi

[woven bolt]

thats an automated message because there was no log file attached. providing a moonraker.log is always good, because it contains information about your system which makes it easier to help you.

anyways... according to you screenshot youre using mainsailos which has numpy preinstalled. did you just follow some guide and which tells you to install it?

[raven sierra]

@woven bolt ah okay, i didnt know moonraker.log wouldve provided anything to help, yes i did follow this guide https://youtu.be/NZNwRy7sbFY?si=-XCEYbSss5SGaNQL but i had thought it was already installed because a few years ago i tried an adxl and it was a complete dud and i wasnt sure if i had uninstalled numpy after finding out the 1st adxk was bricked, just purchased a new one and thought i had to redownload everything.

[woven bolt]

you can check if its installed with python -c "import numpy; print(numpy.__version__)"

[raven sierra]

sorry it took so long to get back to you, life gets crazy. so i just did the command and got 1.16.2 so it looks like everything is correct, i will do more testing when im at my print setup and see how much further ill get 🙂

[raven sierra]

i got farther! 🙂 but now im met with this error. I have already tried to look on the internet and elsewere and not getting much helpful information.

[woven bolt]

https://docs.mainsail.xyz/faq/klipper_errors/command-format-mismatch

here is a guide to fix this

[raven sierra]

Thank you!

[raven sierra]

Im getting closer! But im still have isssues. Could I get some help on this please, ive tried a few things and still getting erros.

[raven sierra]

okay so i just ran the command TEST_RESONANCES AXIS=X OUTPUT=raw_data and it did do a resonance test and outputted: Writing raw accelerometer data to /tmp/raw_data_x_20250312_225140.csv file how do I access this file?

[woven bolt]

https://www.klipper3d.org/Measuring_Resonances.html?h=reso#measuring-the-resonances_1

Those files are stored on your pi. There a two commands in that section to create the charts from the cab data

The charts can be downloaded via scp