BTT pi 2 with pi module 3 not working

[south spindle]

SO i tried settings up my pi module 3, i folowwed the btt pi manual and plugged everything correclty, i get no signal error.
Here are the log files and tried diffrent ribbon cables and also pi cam.

and here the user manual: https://github.com/bigtreetech/CB2/blob/master/BIGTREETECH Pi 2 User Manual.pdf

and the csi camera section
made also sure its in the right ribbon cable socket

[trim coyote]

Afaik it's not supported. The guide you posted doesn't even mention the v3, but the v3 got released way earlier

[south spindle]

i have a changing fps, from 0-4

[south spindle]

so that means?

[trim coyote]

Not supported means, it won't work.

A BTT Pi2 cannot use a picamera v3

[south spindle]

man paid for this shit and wont even work. btt pi2 just causes problems. Will refund it

i wrote support to ask them again, if they say it impossible i am really consedering to dump the btt pi 2

[south spindle]

@trim coyote sory to bother you, was a bit mad yesterday because of the amount of pain i had with btt pi 2 setup of klipperscreenn and more.

But i wanted to ask you what camera would work with btt pi 2., should be small like pi module 3.

There doesnt stand anything in the manual or website that tells what would work.

would the pi cam module 2 work? I want to be sure before i spend more money

[drowsy glen]

to be honest. the pi cam module v3 is a very "closed system for rpi only". other CSI modules "should" work. but to be "save" i would recommend to use a USB cam, instead a CSI cam. but pls wait for an answer from Mr Yel...

[south spindle]

the would also be an option, but the problenm is that i dont know any small cameras with usb that are the same size format as pi cam module 3 or 2.
it needs to fit in a voron 0.2

[south spindle]

or do you know any small usb cams thaf fits the voron 0.2?

[drowsy glen]

the 3DO chamber cam would fit in a V0.2 for example

[trim coyote]

There doesnt stand anything in the manual or website that tells what would work.
Look again at the first sentence of the screenshot you have sent

[south spindle]

would be good, but i am in europe.
But i found another option, i can use my old usb OV2659 cam right now in my voron 2.4, but the quality is pretty shitty.
Do you have any idea how i would fix that?
Here the mod i intend to use on my voron
https://www.printables.com/model/688836-voron-02-hbv1313-camera-mount/files
Here my cam
https://de.aliexpress.com/item/1005005575417435.html?spm=a2g0o.order_list.order_list_main.30.164a5c5fbAsHvx&gatewayAdapt=glo2deu

[south spindle]

ups, but i found another option, reusing the ov usb cam

also that bad quality happend one day on antoher

[trim coyote]

usb cams, will work too ofc. To be exact about which CSI cams will work:
The BTT Pi2 can use the legacy stack of the Raspberry Pi. So basically all cams, that work with that legacy stack, will work here too. This excludes all libcamera CSI cams. So basically the Arducams and the picam v3 won't work

[trim coyote]

Please don't ping me next time. But thanks for being sry

[trim coyote]

Might be because it's a cheap aliexpress cam, or the cam might be just out of focus

[south spindle]

yea sorry. wont happen or do again. also how would i bring it back to focus?

[trim coyote]

It got autofocus, so changing it to manual and dial it in ig