#Getting Error Installing Crowsnest on my qidi x smart 3

59 messages · Page 1 of 1 (latest)

mint stratus
#

I figured out that I need to install a legacy v3 version of crowsnest, but everytime I run it it just gives me this error:
" make: *** [Makefile:37: install] Error 100 "
I have no idea what to do from here, what I have done so far is switched to the legacy v3 version and then ran:
" sudo make install "
I have little experience with klipper or mainsail or linux in general, so any help would be greatly appreciated

wanton lanternBOT
#

Ahoi @mint stratus!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

Discord | Mainsail

We are glad to help and chat with you on our Community Discord, but if you need help and want the best support possible you should, follow a few simple rules:

mint stratus
#

here is a screenshot of what my error currently looks like

serene hinge
#

This means, your OS is outdated and you cannot install any packages anymore

image.png
#

How to fix it? Ask the manufacturer of your printer to release an up to date OS

mint stratus
#

So I am screwed an do way to install crowsnest?

serene hinge
#

There are ways, but if you have to ask if there is a way, you are most likely not qualified to go them alone. We cannot take you by your hand and do all that stuff, as it takes way too much time.

#

I think there were some custom qidi firmwares out there that got "up-to-date" firmware

#

Follow it at your own risk

mint stratus
#

the goal was to avoid it

serene hinge
#

You have to. Basically the only option, unless you find custom repos

#

Custom repos are the other route, but you are most likely not knowledgeable enough to do it on your own

mint stratus
serene hinge
#

In theory you can also just buy a Pi and run the cam external

mint stratus
#

I figured out how to isntall moonraker timelapse now it just wont run in fluidd...

serene hinge
#

Sry what?

#

It used to work, but after installing the moonraker timelapse plugging it stopped working?

#

Weird 🤷‍♂️

mint stratus
serene hinge
#

I just mean a cam

mint stratus
#

I just plugged in the cam and it worked on my qidi, no setup with crowsnest or anything

serene hinge
#

Not crowsnest

mint stratus
#

and it still works

#

I just cant get the timelapse setting to show up

serene hinge
#

So why do you want Crowsnest then?

serene hinge
mint stratus
#

because I prefer it to fluidd

serene hinge
#

You don't need Crowsnest for Mainsail

#

Those are independent softwares

mint stratus
#

I cant get a camera working otherwise

#

and I really need a cam

serene hinge
#

Yes, because your Moonraker is outdated

#

This has nothing to do with Crowsnest

#

You have to install some older Mainsail version in order to get cams showing up in Mainsail

mint stratus
serene hinge
#

They still work, you just cannot look at them

mint stratus
#

Cause I installed it with KIAUH

serene hinge
#

I don't know the exact version, when camera hiding was implemented

mint stratus
serene hinge
#

With ssh?

mint stratus
mint stratus
serene hinge
#

It has to be some version where the second number went up

mint stratus
serene hinge
mint stratus
serene hinge
#

It should be listed under features ig

mint stratus
#

Ok, but how do I get time lapse working, since that is what matters might as well get that working on fluids then work with mainsail

serene hinge
#

You can set it up through Fluidd (no idea how), in Mainsail (only if you have added a cam and it has to be visible) or in the moonraker.conf