#i need full installation of klipper on raspberry pi zero w and skr pico can ant one help?

1 messages · Page 1 of 1 (latest)

fluid mountain
#

help

bold jungleBOT
#

Ahoi @fluid mountain!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message

To change the tags of this post:

  1. Open the ... menu on the top right corner of this post.
  2. Find Edit tags
  3. Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Note: This is an automated message

Thanks for your cooperation!

#

Ahoi @fluid mountain!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

Discord | Mainsail

We are glad to help and chat with you on our Community Discord, but if you need help and want the best support possible you should, follow a few simple rules:

smoky cloak
#

First of all, a zero w is more or less the edge to 'impossible to use'. It can be used to fire up your Mainsail/Klipper experience but if you plan thing like Camera, Input Shaping or a like, this little boy will spit out his internals and wave the white flag....

#

That said, if you need help, we have to know exactly where you got stuck or what kind of information you need to proceed. So, please share some more details that we can see a big picture of your case in our minds.

smoky cloak
#

@fluid mountain Last chance to reply, otherwise I will close this post in a few hours

fluid mountain
smoky cloak
#

As I said, we need to know in detail, which interface is meant? If you meant mainsail it needs no setup.

fluid mountain
#

yes mainsail

smoky cloak
#

So.. Now what is your specific question? I am sorry but I cant help you if you dont provide any kind of information, as I said, mainsail itself is your GUI and needs no setup. It simply runs in your browser.

#

If you got no clue about the whole klipper ecosystem, I highly recommend watch some youtube videos about or read some articles about the setup process. We, as a team, have not enough time to grab your hand and guide you through the basics. Those have to be researched/learned by your self. If you got stuck at a certain point, you could ask about a specific problem you are facing.