KAMP

[simple nebula]

Ahoi @honest oak!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message

To change the tags of this post:

1. Open the ... menu on the top right corner of this post.
2. Find Edit tags
3. Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Note: This is an automated message

Thanks for your cooperation!

Ahoi @honest oak!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
This is an automated message

[random olive]

Still wrong tags

This issue has nothing to do with linux

Also can you answer me following question: Why did you choose to join our server and asking help for some third party macro collection?
Just wondering, as this happens from time to time with bigger collections, that we simply cannot support.

The movespeed is determined as follows:
{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
The flow_rate comes from this:
{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
So in the end it's set by your _KAMP_Settings that you don't have included, so they are at default.
The default value is 12 (https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging/blob/main/Configuration/KAMP_Settings.cfg)

For my 0.4 nozzle I used 10 for the KAMP purge. (I'm still on ald old version, but it should be still the same macro)

Ok, looking at the macros they changed quite a lot.
If I do the math right, my current movespeed lays at F300, yours should be F144.

Reading your description again you talk about:

because the printhead mooves too quick to the desired position
So you actually mean the travel before that?

For that it uses the max_velocity of your printer. 1500mm/s. This seems quite fast

[honest oak]

because he has no dc server and there arent as many servers which are only klipper specifik. so there is no klipper server or monoracer one. Sorry

[honest oak]

how could i change it for the macro?

just change the flowrate in the KAMP_setting?

[random olive]

There is a klipper one ^^
You just cannot find it in the Discord discovery....

[random olive]

Nope, that was wrong from me ig. What is your problem? Moving too fast to the position or moving too fast during printing it?

[honest oak]

during the positioning to the placewhere it should purge

the purging speed is fine

[random olive]

How fast can your printer go? What is your top travel speed during prints?

[honest oak]

like 300-350 mm/S

[random olive]

So why do you have max_velocity: 1500 set in your printer.cfg?

[honest oak]

jub

[random olive]

That value is used for travel moves of KAMP:
{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}

[honest oak]

could i change the * 60 ?

or change the max velocoty in the printer.cfg

[random olive]

No, don't edit the macros!!!!!!

Change the values in your printer.cfg to sane values

Those values are safety mechanisms, so you should set them to values your printer can actually do

[honest oak]

ok

So i changed IT to 1000 but still fails i'll Set IT to 800 and the try again

[random olive]

I think you should do more like 400 or 500

[honest oak]

I have 350 now IT in Progress

Works now

Thx for your help

[random olive]

Then please close this post