fathom abyss
I have instructions, but i dont know which one the port is
sudo /usr/local/bin/bossac -i -d -p /dev/ttyACM1 -e -w -v -R --offset=0x2000 out/klipper.bin
lrwxrwxrwx 1 root root 13 Jan 8 21:43 usb-Seeed_Seeed_XIAO_M0_BF6AFE845154343739202020FF152336-if00 -> ../../ttyACM0
which part is the port now?
Hi, @valid void
valid void
I have instructions
I don't have instructions. Maybe send a link to it, that we know what you are following...
But you can use basically both. The first one or the second one, as the first one is just a symlink to the second one. So just use/dev/ttyACM0
fathom abyss
Its the ERCF installation
valid void
Hi, <@216564703185338369>
Don't ping me, only because I type. It actually happens quite often that I just open it, to see if I have an answer and then I sometimes just accidentally forget to click back into my coding environment...
visual bearBOT
Ahoi @fathom abyss!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information
Note: We only accept .log and .txt files as log files.
fathom abyss
So i need to use this?:
sudo /usr/local/bin/bossac -i -d -p /dev/ttyACM0 -e -w -v -R --offset=0x2000 out/klipper.bin
valid void
According to the screenshot you'v sent, yes