#i installed klipperscreen and now i have this error what happened?

1 messages · Page 1 of 1 (latest)

twin steppeBOT
#

Ahoi @toxic cargo!
Welcome to the Mainsail support-forum!
There is a problem with the tags you selected for this post. Please fix them to fit your question.
For further information on tags please check the readme: #readme message

To change the tags of this post:

  1. Open the ... menu on the top right corner of this post.
  2. Find Edit tags
  3. Select the checkbox of the correct tags.

Usually you just need to select one tag!
If you still have no idea which one to choose, feel free to ask here.

Thanks for your cooperation!

#

Ahoi @toxic cargo!
It looks like you did not provide all the necessary information we need to help you.
Please upload your logfiles and a detailed description of your problem.
For further information see: https://docs.mainsail.xyz/faq/getting-help/discord#provide-information

Discord

We are glad to help and chat with you on our Community Discord, but if you need help and want the best support possible you should, follow a few simple rules:

toxic cargo
bright token
#

@toxic cargo pls fix your tags... and normally we dont make klipperscreen support here...

#

and pls upload your moonraker.conf

lone dune
#

We will need the moonraker.conf

#

It’s not a KS error this time …

bright token
#

it looks like a wrong copied line:

configparser.ParsingError: Source contains parsing errors: 'moonraker.conf'
    [line 61]: 'moonraker.conf\n'

but to help in detail, we need this file

toxic cargo
bright token
#

this is not the moonraker.conf

toxic cargo
#

oh woops wrong one one min

#

sorry what did i do wrong with the tags. im new to discord still.

bright token
toxic cargo
#

will do

bright token
#

why do you think "klipper" is the right tag for your issue?

#

ok. the log error message and your config file dont fit very well. so i'm not 100% sure about the exect issue.

so pls try first to remove the spaces in front of the KAMP config block. there are "wrong" spaces before each line:

image.png
toxic cargo
#

fat fingers sorry

bright token
#

so "type", "channel",... and until auto z calibration there is in each line a space as first char

#

pls remove all these spaces and click "safe & restart". when moonraker is started again, pls upload the new moonraker log again

toxic cargo
bright token
#

FYI, this has nothing todo with your issue right now here, but you should shutdown your rpi, before you switch of the power:

Unsafe Shutdown Count: 23
toxic cargo
#

noted thanks. i probably have to wait longer before flipping the power on the back

bright token
#

round about 10 seconds should be enough...

#

pls upload your new moonraker.conf again. the error is still the same

toxic cargo
bright token
#

just out of interesst, why do you disabled the mainsail update_manger section?

#

ohhhh

#

i found the error in the log!

toxic cargo
#

not sure dont hink i ment too,woohoo!!

bright token
#

the line "moonraker.conf" is wrong here. pls remove this line and "save & restart" moonraker

image.png
#

here are # before each line. this is like "disabling" it

toxic cargo
#

i will get rid of them

#

well it got rid of the error but now klipper wont start up. ill power down and wait a min and restart it to see

image.png
bright token
toxic cargo
#

hmm no luck?

image.png
lone dune
#

Klipper.log

toxic cargo
bright token
# 
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32f446xx_26001F000151303530353135-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32f446xx_26001F000151303530353135-if00'
#

it looks like your board is not connected to the pi

#

pls post the output of:

ls -lt /dev/serial/by-id/*
toxic cargo
#

it shows my ercf but not the pi for the printer?

bright token
#

you are connected with your pi... you mean your mainboard?

#

and yes. this one is missing here

toxic cargo
#

ill check the usb cables..

lone dune
#

So what else did you do on the hw while installing Klipperscreen

toxic cargo
#

yesterday i got ERCF installed and calibrated stopped for the night woke up today and installed kipperscreen. came here after the error.

#

for the klipperscreen im using a old android phone and plugged in a usb to the pi to the phone. maybe i knocked something out.

bright token
#

ohhh wait

#

when you use a android phone for klippserscreen, why do you also installed klipperscreen on your pi?

toxic cargo
#

that was the steps provided

lone dune
#

I think he use it only as display

toxic cargo
#

yes only a display sorry i did not clarify

#

recycled a old phone for just the screen

bright token
#

pls post a guide how you use it as a screen. i only know the method to install klipperscreen on the phone

bright token
toxic cargo
#

yes ERCF v2 is new docs are still being made. but lots of help on discord on there page

#

@bright token well its back up and running i must have knocked a cable loose. thank you so very much with your help!

image.png
bright token
#

Thx for the guide. Pls close this post, when all questions are answered.