Raspicam install not working

[silver heart]

Just adding my information hoping to get some insights as to why my install isn't working. Included my crowsnest.cfg and log

[golden fable]

Let me guess, you are using klipperscreen?

[silver heart]

i had used it before but for now i have it uninstalled.

[golden fable]

Then send your /boot/config.txt

[silver heart]

My hardware is pi4b and BTT pi 5.0

whats best way to grab that?

BTT Pi TFT50 V2.0

[golden fable]

I always use winscp

[silver heart]

done

[golden fable]

Is the screen still attached?

[silver heart]

yes its still attached.

currently displays that i'm logged into mainsail

[golden fable]

Then follow: https://crowsnest.mainsail.xyz/faq/how-to-setup-a-raspicam#ov5647-and-or-klipperscreen

After you made sure crowsnest is on the newest version

[silver heart]

copy. rebooting after changes.

v4.0.2-2-g8b54eae9 current crowsnest version

[golden fable]

Search for updates

You need 4.0.3

[silver heart]

ok updated to 4.0.3

do i need to change over from /webcam/webrtc

supported=1 detected=0, libcamera interfaces=1 i did get that when i ran vcgencmd get_camera

[golden fable]

Only if you change mode to ustreamer

[golden fable]

Remove the dtoverly=imx219 from your boot config

[silver heart]

ok doing that now

waiting for reboot

new log

[golden fable]

Have a look at the last step I've sent

https://crowsnest.mainsail.xyz/faq/how-to-setup-a-raspicam#step-3-try-out-ustreamer-and-camera-streamer

[silver heart]

success!! thank you.

Switched to ustreamer and it worked