I am getting an error and Crowsnest is not starting. Logs are saying error on line 150.
https://pastebin.com/rhcAwGbL
#Switched from Mainsail OS to Raspberry Pi OS. Everything is working except the webcam.
past girder
ember nest
if you just switch from mainsail to fluidd, you can only install fluidd with KIAUH. you dont have to reflash your pi
and pls upload a crowsnest log with "debug" mode
past girder
I was having problems getting uart to work and the person helping me suggested I try a clean install
okay on it
ember nest
I was having problems getting uart to work and the person helping me suggested I...
in mainsailOS uart is already installed/enabled. so when you try to enable it a second time, it could create issues
past girder
I think the problem ended up being my bin file. But i had already switched to raspberry pi os so I ddn't want to start over a 3rd time
ember nest
¯_(ツ)_/¯
past girder
ember nest
how do you installed crowsnest?
spring plank
Your naming of cam1 is wrong as you can read in this other thread on the same error:
#1086414163372417174 message
So something like [cam molar1] would be okay. As cam is a keyword for crowsnest it has to be at the beginning of the parentheses and then you need a single word without whitespaces as the name.
ember nest
Your naming of cam1 is wrong as you can read in this other thread on the same er...
ohhh thx! I completely overlooked that 🙈
spring plank
I didn't see it at first too but I thought the error sounds familiar ^^
ember nest
i just checked the webcam path, resolution with the cam resolution, if all streamers are installed in the log but dont checked the name 🙈 shame on me!
past girder
Okay I will try cam molar1
you guys are freaking legends
that did the trick
thank you
ember nest
@past girder pls close this post, when all questions are answered