Dual Rear Cable Arms Stubby/Tall

[daring reef]

Support for CPAP/Can Cable combined into the rear cable arm.

Will need two more M3x8MM SHCS and two more t-nuts.

Works for 18mm cpap hose.

[daring reef]

Definitely looks better with the logo bigger. Glad it worked!

[daring reef]

V1.1 Logo size decreased and logo now follows curve of cable arm.

[rocky basin]

Got it loaded up, about to send it

[daring reef]

Did the overhang do okay on the Z, mine struggled a little bit on the z doesn’t look the greatest you have much better cooling then I do

[rocky basin]

Mines fine

[jolly crescent]

cpap

[daring reef]

Yeah I have one on my machine I’m currently building but the x1c don’t like that overhang

[jolly crescent]

id just reprint it when its assembled if it bother you

[daring reef]

I’m gonna!

[solid steppe]

Will this work within inside the frame steppers

[daring reef]

I flipped mine with inside frame steppers

[solid steppe]

On the inside of the frame?

If only that piece that mounts to the 2020 was a little longer I could keep the wires outside

[daring reef]

This is how mine is mounted flipped

Wires inside frame

[jolly crescent]

@rocky basin

SHOULD™ work

sorry for the weird fillets but the stock step was weird af

wait I presuported the holes

print it on the back w supports to help the bridging on the big hole for the knomi

also I had made it like 1cm higher cuz of the knomi

[daring reef]

What was weird about the step file?

[jolly crescent]

Filets

Waaaaayyy too many of em even on places that dont need em or a .35 chamfer and a filet on top of that and random sizes

[daring reef]

Hmm weird, I made that file and their isn’t chamfers on filets anywhere in my fusion file.