quick lion
I wanted to make a nozzle wiper using the those silicon brushes that bambulab and k1 printer use since im on an IDM scanner.
I HAVE NOT TRIED THIS YET.
the spacing might need to be adjusted but the idea is to have the the base connected to the bottom of a 2020 extrusion with Tnuts and the wiper holder to connect to that one at the preferred height
you will need
4 M3x8 shcs
2 Heat inserts
1 silicon wiper
clear arch
I currently have a inside stepper mount and e34m1 so the only place i can really mount it i think is the front bar. printing this now
will let you know how it goes
clear arch
so printed it, way too low with my relocated corss bar and depth isnt enough
not sure etiquette on this but do you happen to have to step files so i can poke and modify it a bit?
quick lion
not sure etiquette on this but do you happen to have to step files so i can poke...
here you go forgot to upload them
clear arch
Made it a bit longer, it’s mostly stable at this length and it works so I’m happy. Thanks!
languid stirrup
Made it a bit longer, it’s mostly stable at this length and it works so I’m happ...
If you have a shimmy when wiping the nozzle, you could try using two corner brackets into those adjustment grooves and attaching them to the extrusion. Maybe that would help stabilize it more?
