PLA using orcaslicer profile from this discord. Fans 100%. Stealth Burner hotend. Help me please before I buy a bambu lab and shame myself and family.
#Overhang Sucks
cyan escarp
onyx warren
Looks like a cooling issue.
glossy tide
That is an extreme overhang designed to be a cooling stress test. Definitely cooling issue, especially with a stealthburner
you can try a few things like, slowing down overhangs extremely, extra perimeters on overhangs, reverse on odd, etc
The biggest thing that would fix it is switching to CPAP
There are CPAP shrouds for stealthburner if you are keen on staying with it, or other toolheads have the options aswell
cyan escarp
Was thinking about moving to Fabreko's 9200rpm 5015. Ill also look into CPAP.
noble sedge
PLA using orcaslicer profile from this discord. Fans 100%. Stealth Burner hoten...
How many air ducts?
Slow down mm/s for overhangs. Try half speed, then half of that until it works
If you're printing PLA in a enclosure, then open it up.
Assuming you did a temperature calibration. Then you can drop overall temp. Down 5-10*C
cyan escarp
Stealthburner so 2 ducts. No enclosure. Ellis guide followed. Here are my overhang speeds. I'll half them and retry.
cyan escarp
Would help if my fan was blowing more than 10%. Bad fan . Glad I ordered a CPAP setup...
