#Anbernic RG477V
1 messages · Page 3 of 1
Maybe my math is wrong buttt
According to my calculations. Unless you absolutely need a vertical layout… your still better off with a Thor
Also after the weights factored in the Thor and 477v are in the same weight class
I don't absolutely need a vertical but I really don't want a second screen + hinge
Or maybe I do absolutely need a new vertical... this thing is calling to me
But i don't want the Thor , i really don't want to gamble with that hinge
Fair haha I realize they are two totally different beasts. Just something was sitting weird with me when I realized the aspect ratio/size etc
Side by side it’s even worse :/
Just from a value proposition the Thor is insane
naturally
If I was in it for value I'd snag the rp6 or konkr pocket fit over the Thor
Ability to use comfortably both Sticks and DPad, and not having to sacrifice one for the other. Ability to use the buttons without hitting the right stick. The Retroids have undoubtly the better spreadsheets but are obvioulsly imbalanced when it comes to controls. There are also people liking LCD more because OLED subpixels sometimes lead to weired artifacts when used with advanced shaders.
Just watched the stream, it looks interesting
Any idae about the size of the device ? I wild be interrested into the aspect to screen ratio.
I guess as someone who adored the 477m then sold it off for the Thor…. I’d have a very very hard time stomaching the cost to play on a smaller screen, no driver support. Which I know Stubbs mentioned but honestly not a single celebrity ever talks about the importance of driver support. I’ll gladly take a slight hit to ps2 upscale to play 30+ more nintendont snitch games
Only to get 4x vs 2.5x in ps2……
🤷 I dunno guys value just seems skewed asf
I was more less bringing to attention is all sorry
I wanted to love the 477v and then I dug a lil deeper is all
Thor bros are the vegans of the community
It's all good just feels a bit like people who go in the Thor channel and ask "why would you risk it on the hinge, why not get an RP6"
I guess price will be the sway point for a lot in the end
I don't think the price matters to vertical lovers
This is a device made for a certain kind of gentleman
I guess so lol 😂
*within reason price doesn't matter
Want to play gc or ps2 at 2x better resolution on a display that doesn’t even support that resolution lol 😂 and pay a premium for a chip with no support or drivers. So odd to me. Oh and it’s a smaller screen in the end idk just so weird. And again i think the end note should be reviewers need to stress drivers more
Verticals are for
1- People who were little kids during the GB era
2-Retro fans who love eveything 80s / early 90s and get a vibe playing on a GB clone
Why buy a Thor when the hinge going to go floppy eventually and you have this dumb second screen giving off light pollution which is still physically there even if you turn it off?
It's very easy to "nope" devices when they aren't intended for you, see
The unboxing video shows the size of the console. I have calcluated the screen to body size ratios :
- RG477V : 42%
- RG477M : 43%
- RP6 : 50%
- RP6 (4:3 display only) : 38%
(unless my calculations are wrong but I am 90% confident)
not even gonna lie bro i think the 477v is their cleanest looking handheld so far
out of like the new ones they been releasing
I have stopped playing console games at PS2 time, and I have never played anything 16:9 on consoles. So such devices give strong nostalgia to people like me, indeed. With a strong enough GPU to use decent shaders, of course.
My first was the PS2 and i played them until the Xbox360 then moved to pc but i love 80s/90s and a Retro gaming so a device like that makes the gaming experience better for me.
Anbernic ASMR lady strikes again
missed this, wow that's bad
like astoundingly bad
That's why I always say wait for reviews before pre ordering, saving $10 isn't worth it if it has potential issues.
I don't get it though the 477M is more compact but has better stability
yeah that is rough stability
potentially the metal chassis helps with heat dissipation
but you would think that Anbernic would know that and would have compensated for it
until gamma can get an unbricker for the 8300 im sticking with the 476h but this does seem better than expected
This feels like the evo again with the bad scores 😅 wonder if any reviewer is willing to open it up
I think things improved with evo after redoing thermal pad + paste
If the 477m had stacked and not inline triggers I would of ordered , not a fan on inline triggers for such a expensive handheld . There OK and usable on budget hardware but not something $250
interesting i dont play enough analog games to care so i prefer inline for pocketability
best to see how real world tests do i guess
I don't care for pocketabilty and play analog games

waiting game to see if Russ calls it half baked now
i still want a 476h 😄
Yup, that's why we need more hands on reviews
WTH did they do lol… the 477m didn’t stutter nearly as bad as the 477v was in the stream tbh
it's excellent if you know what you are getting into
Not my first t820 device 😉
476h is great even better with gammaos. yes t820 is bummer but its not terrible/ dreamcast looks fantastic on that screen
as long as you keep your expectations in check it's one of the greats
I left the chat all happy about the handhled and now it's broken 😅 ?
nah not broke yet. Too early for that 😄 ^
He jinxed it , RIP 477V , it's over
This might be my favorite 4:3 android of theirs in general.
I'll test longer play sessions today.
thusly
But those numbers and stuttering in wonder shouldn’t be happening as someone who extensively tested that game on the 477m
They did something weird on the software side. And that 8300 is in a limp mode at best lol
Wasn’t sure where this clip was going with the music in the background and the groping of the controls
I almost had to look away
how bad is that stability in regards to real testing?
@vital mulch ^
So, am I the only one who's 476H is losing it's finish? I worry this is a thing with the new glass front Anbernics
Yeah, pushing it too hard to the point of being unstable it seems? Rep said a new balanced mode is being added in an OTA.
Very odd hopefully it gets sorted quick
Glad it’s comfy
Glad gammaOS is on the way as well.
Very true!
I wish we would get some driver development
Honestly that’s the only thing that really sucks about these hyper powered Anbernic devices is lack of drivers
I’d love to have a vertical with two sticks and the ability to play more on it literally is crippling the amount of difference drivers make in my eyes
Like 30 ns games on the 8300… to almost 50 on the g2 gen 2
I also noticed in your stream @wet shale it seems to have the same cancerous battery drain the 477m had too :/ which is a bummer
Over 20% in one hr and some change is crazy
For comparisons My Thor running my launchers locked, Netflix or Disney on bottom and switch on top doesn’t even drain that much.
As much as I want the black V, I'd hate it if this white was under black paint. It's tolerable with the retro colorway.
Yeah stock software is in need of some love there. The balanced power mode will be a help there. Gamma will be the real help though.😆
When is a company gonna sign that man as a software guy lmao 😂
Or at least call him in to consult at the very least
it's not like he didn't got any offers
I have no clue I was just making a joke really
Oh so they can do OTA
Interesting
Yeah this one has an OTA app, unlike RG DS
👀
idk what this all means but i hope it gets ironed out
really hoping the 477v will be worth
did he? I'm not up to speed on Gamma lore
LEDs working fine, need to look at the start/select button but should just be a toggle
yeah this will be an easy port 🙂
Wow wow
That was fast
Great. That makes the device more appealing to me ! Do you beleive that Gamma will help for performance syability issues pointed by Stubbs ?
I just got GammaOS running on it
I'll let you know after more testing this week
I am running 3dmark wildlife extreme stress test just now
no idea what to expect, but lets see if theres room for improvement
Thanks. Anf having your subjective input about fan noise would be valuable.
Needs tweaking, but initial score with zero optimizations
Thats with GammaRGB running, and at 120hz, so probably taking a hit
how shit can Anbernic do with their Android build 
thats awesome!
not the top score but the stability
Oh shit yeah
yeah I got 25w when I tested initially, I saw it spike once to 27 when I used another cable but seems to settle at 25.2
the faster you charge the more likely your battery will explode 
depends on the chipset used too tho
like my D8300 phone does way more than 27w and pumps a similar sized battery full in 40minutes 
This always bothered me and being a idiot that never learns said this everytime I bought a Anbernic at this point @little orchid should get a cut of the royalties
instead we just pay Gamma on top of it 
wow that's dramatically better than what Stubbs got
that's a spectacular fuck up on Anbernic's part then
The great thing is the massively improved stability.
The RG477V is here. Rejoice.
Not really. Stubbs 's also stabilise at low 2k after 12 loops, and had better results for the first 9 or 10 before the big dip.
well he saw 30% stability at one point
Best loop is still pretty rough though
Yes, that 30% was from the drop to 800 for 1 loop before recovering to 2+k, wouldn't really say it's much better.
#1440470840373153862 message
Stubs went like "You guys are way too happy on this server , not on my watch "
Starts testing benchmarks
Oh man that screen misalignment on Stubbs' unit is soooo bad. Glad I'm skipping.
Hmm ok
Lol even their unboxing video, it's predominantly the black unit.
this kind of stuff is usually in the sample batch, I'll flag it to them
Hope so. Screen misalignment is so obvious without a black bezel.
Great ! Stability and good performance at the same time ! How was the fan noise during these tests ?
Video review (black model): https://fxbilibili.seria.moe/BV18HqhBFEvA
适合RG477和RG557的Switch游戏
链接: https://pan.baidu.com/s/12HQ46jUOIsPMDi57XH7DOA 提取码: pq6y
--来自百度网盘超级会员v9的分享
This is an issue ? My RP5 was like that 😅😅
Depends. If you have symmetry OCD, yeah it's an issue.
It's why I'm for having black bezels or opt for black bezel-less devices.
I hated how the frame looked off on my 406V but for the RP5 somehow it crossed my mind like " Ah it's because of the bezeless cut around the screen "
Sucks because i sold it without knowing it was an issue
So is this the bezel showing again like the 476H grey model or something else? If so I will get the black version. Seeing the bezel will bug me
my rp5 was misaligned, missing a pixel off the top
TBH if a brand wants to go the bezelless route with their device, I expect perfect alignment. Anything less is a defect IMHO. Even Apple, Google, and Samsung aren't brave enough to go bezelless.
I have a couple of samples that are misaligned, fine it's a preview unit but my rp5 is a retail misalignment
I had 2 grey RP Mini's and both screens were misaligned. Asked for replacement screens and the replacements were both also misaligned, albeit less than the original screens. Converted them to full black RP Mini V2s now. Never again.
The chip is cooking in self
Lol I think in the picture Stubbs maybe holding it off to the right a bit
That's why only the right side is visible
Looking back at anbernic's video, it looks fine
best to ya know, hold off on pitchforks until confirmation of fuckery 😄
I’m swinging towards black model. Now that bezel issue has been pointed out on Grey. Won’t be able to unsee it
Performance issue sounds like it can be resolved
Nah theirs is also off. You can see the bottom black area is larger than the top. The device is tilted back so technically the top should have a larger black area. But the bottom is larger. But anyway, I assume all of these are samples/prototypes, which hopefully they fix in the production models.
now the black frame on the rg476h wasn't so bad, huh? 
I'm pro-bezel. All devices need a black bezel. Unless the company has god-tier manufacturing and QC.
This 💯🤣
Hopefully it's one of the early pre-production samples same as the review units maybe
Might be a stupid question but do you need a PC to install Gamma OS or can it be done directly onto the device? Plus do you still have access to the Google Play store ?
you need a PC yeah, installation is not plug and play
Gamma makes two flavours of it, the "normal" one which includes all the Google services including the play store, and the "lite" one which strips everything Google for performance
I mean there's a reason why the grey rg476h shipped with back borders, no? this slight asymmetry is very obviously going to be present in retail units
but fwiw I don't think it's a big deal, I have had devices with minor asymmetries in the screen borders before and you don't really notice them much when playing
as long as it doesn't literally clip pixels off like in @earnest swan weird rp5 unit lol
Thanks for the quick response but this will probably be my first GammaOS device
Gamma has a pretty extensive community, if you signup for his patreon you'll have no trouble getting help
Charging speed seems fine
OTA update pushed to the 477V units to address the thermals.
RG477V -- V1.35
OTA升级已经推送到给所有发出去的测评机器,请对接国外博主的同事通知到位,最新版本升级,优化性能之后再测评!
Optimize the system Fix known bug,
Add CPU scenario "Performance Mode" and optimize performance strategy,
1.优化系统.修复已知bug
2.新增CPU场景"性能模式",优化性能策略
I'm updating now
that was never in question 
Definitely depends on the person at the end of the day. I have mild symmetry OCD so very obvious/visible misalignments will constantly bug me.
Literally stopped using my RP Mini because it annoyed me. Only started using it again after I converted them to V2
Now you have pointed that out of the grey I can’t unsee it. So black for me
fwiw it's perfectly aligned for me, but appears to be thicker on the opposite end when held at a slight angle. All of the pictures in this thread are at an angle (even Stubbs' that looks mostly straight-on) so that may be the issue, as opposed to actual misalignment. Regardless of how it presents itself, if it will bother you at an angle then it's still something to consider.
Thanks for insight Russ 👍🔥❤️
Likely getting black. But will keep watching reviews
What is going on with the camera?
I'm in bed, sue me 
It’s giving me battlefield earth flashbacks
What a classic movie
/S
The new update adds this new balanced performance mode. Trying the wildlife extreme stress test again.
Mine should be in today, excited to mess around with it
I hope it’s just the angle. With all these manufacturers pushing for bezelless designs, they better be upping their manufacturing processes and QC as well. I don’t think any of them should be given a pass for any misalignment.
I don't see any alignment issues
Also test results 
93% stability up from 25%
Still unstable when using the "high" performance mode, but great at this balanced "performance" mode
That's looking better
This is on balls to wall max performance mode on GammaOS, but Fan needs to be 100% to sustain this
I can kinda see it here
Unless at an angle. It’s subtle. Right and top thicker than left and bottom
Yeah inner screen bezel
Black border
Similar issue with grey model on 476H
Admittedly not as bad as that
Black should hide this for those who are bothered by it
Maybe 😅
Not a big deal breaker by any means
Yeah I'm not seeing it
LGTM tbh
Yeah but I see what they mean from the pics in here. You have to look under the shell a bit at an angle to see the thin little black bars
But looking dead on its all screen
When you see the bars, they are uniform all the way around
But I don't see even 1 row of pixels worth of bar
3 Anbernics walk into a bar
Thats good. Like you say. Maybe it’s just not picking up well on camera.
The bar is the sides of the screen housing it looks like
Anbernic ha lanzado su nueva RG477V una gameboy poderosa sucesora de la RG406V ¿ merece la pena?
🔥 Oferta Christmas Sale : -30% en GVGmall con el código TV20
Windows 11 Pro Key(21€): https://es.gvgmall.com/gvg/Tuber11
Windows 11 home (18€) :https://es.gvgmall.com/gvg/Tuber11h
Windows 10 Pro Key(14€) : https://es.gvgmall.com/gvg/Tube...
may as well learn some Spanish while you wait for Russ 
FWIW this is the 477M on GammaOS
…So is it just straight up an issue of the hardware design for the shell with the V?
inferior vertical is inferior 
I prefer the V personally 😄
It'll probably some aggressive dynamic thermal throttling IMO but I'll dig into it. Don't take my word as gospel
The reviewer said it will go on sale December 20, starting at $199 for the 8+128GB model
477m early bird pricing was $219
that's a good price, good job Anbernic
$199 retail or EB?
$199 early bird 3 days
this is actually a great deal
so I expect 230€ shipped on AliExpress for EU 😅
Yeah $199 8gb early bird, $239 for 12gb
6am EST for the 12/20 launch date. Final retail price will be 219.99 for 8gb and 259.99 for 12gb.
Should I do it? @steel spire
I mean by the time it ships Gamma will be done with the OS
So it’s not like I gotta setup much
He really does spoil us
I still need to flash gamma to my black 476H
Not to mention buying another SD card for it.
32GB more than covers all my games
Then you got to find and/or buy the case for it.
I don’t have anything past GBA and SNES on my handhelds
The base internal storage would cover any PS1/2 games I’d be interested in
how many game have you finished this year?
What model was sent to reviewers? 8gb or 12gb?
12gb
Is it worth future proofing or do you think 8GB would be enough?
I have no experience with this chip. So curious
If you're going to be sticking to 4:3 content, I don't see too much of a reason to spend an extra $40. 
For myself I'd buy the 8gb
Andrew would buy the 12gb 
Yeah. I have my odins and konkr for higher stuff. I will probs do that then 😅
Necessary for witcher 3
A 4:3 game? If you want to use GameHub or winlator, I'd go for 12gb
Early bird price looks pretty good
Man, if only the RG477V has the color options akin to the Retroid Pocket Classic..
If only Anbernic were ambitious in the color options department..
If only Retroid had put sticks on the classic
The chip is way too overkill for GBC / GBA / Snes
Yeah, I do wish for the Classic to have sticks. I know it's a controversial opinion but damn, that would be cool to some folks like me.. 😔
It would have been perfect tbh The thing can play light Switch games and it's nerfed by the lack of sticks. Damn put a simpler chip in there then
i'd like it with sticks too
Retroid Pocket Classic Pro incoming
I killed all thermal protections down to the kernel level, now just the PMIC/hardware/stage 3 protection kicks in. Unfortunately thermal shutoff occurs before benchmarks complete, although I do observe improved performance.
It's not stable. I'll review the cooling solution tomorrow, replace the thermal compounds and see how we get on
I think I've done the best I can in terms of performance tuning on this unit anyway
So for thermals rg477v < rg477m < rg557 ?
Does 557 has any noticeable improvement over a 477m?
I'll test that later today
I'll maintain, for the systems that I play personally, the 477V is a delight
Anbernic's latest vertical handheld is an excellent mix of design, comfort, screen and performance. Let's dig in.
** The handheld goes on sale 20DEC at 5am EST. The links below won't work properly until then **
Anbernic direct: https://tinyurl.com/AnbernicRG477V
AliExpress: https://s.click.aliexpress.com/e/_c3RhU7c9
Black Frame Insertion gu...
it looks really sleek
Sliders used on the first Flip were underrated and would of still been pocketable
FWIW, this is the best I can get with current hardware.
In reality, this is a torture test, and we're definitely limited by thermals.
Performance feels good to me regardless, I'll make a recording later.
Time to grab a drink and snack
Is on par with the 477m ?
At peak performance, yes
at sustained torture workloads, the 477M dissipates heat better, sustains those workloads at peak levels for longer
Thanks for the info
i miss the thick cheeks
Nice to see the screen is aligned lol
huh battery life tests look pretty good
maybe they've fixed the battery drain
Links 👇
https://anbernic.com/en-gb/blogs/news/anbernic-rg-477v-first-look
https://store.steampowered.com/app/418370/Resident_Evil_7_Biohazard/
GameHub Lite https://github.com/Producdevity/gamehub-lite/releases/tag/v5.3.3
https://www.buymeacoffee.com/forthenext
#anbernic #residentevil #re7
let's go guys
I’m at work. But will catch up later 🔥 no youtube on work wifi 🤦♂️
that's too bad, because I'm gonna stream shortly 
Stock or GammaOS ?
Will 100% watch later
At work too

stock with the latest update (1.35)
Nice , Black model looks sexy
00:00:00 ANBERNIC RG477V arrives! PlayStation 3, Demon's Souls and more PS3 games tested00:01:50 Stream startDemon's SoulsDigimon00:00:00 Stream closinghttp...
Yeah black model looks great. Def the one i’m getting 🔥🔥🔥
Will see how fingerprinty it is by end of stream 🤣
it's quite boring in here, has anyone found any drama yet?
Benchmarks but i think it was solved already
Just to double check.. it’s digital triggers?
if you have to ask, you already know the answer
Yeah that's pretty good. Keep in mind some later games will probably look better without the color filter, though! The color filter is good for earlier games that cranked up the saturation to make up for the lack of a backlight but it'll look too dark for something like Super Mario Advance 4 Super Mario Bros 3 which was designed for the SP's backlit screen
Black model is the move, if not too finger printy 
Oh so I need to finish my teleporter now?
black model is always the move, just wipe the fingerprints off
What systems are we playing on this?
Dpad centric 4:3 stuff?
all glass front. its fingerprinty lol
These can vary from some finger printy to very finger printy. 😆
so is your phone 
The ps3 games I tested:
00:03:14 Demon's Souls (PS3) 00:13:56 Genji: Days of the Blade (PS3) 00:28:14 Pure (PS3) 00:33:49 Virtua Fighter 5: Final Showdown (PS3) 00:39:53 Sengoku Basara: Samurai Heroes (PS3) 00:50:18 Digimon All-Star Rumble (PS3) 01:00:18 Gran Turismo HD (PS3) 01:05:22 Ridge Racer 7 (PS3) 01:13:10 After Burner Climax (PS3) 01:18:10 G-Force (PS3) 01:27:03 Soul Calibur IV (PS3) 01:36:55 Initial D Extreme Stage (PS3) 01:43:37 Resident Evil 7: Biohazard (PC)
I think the new update sent to reviewers has improved the minimum frame rate and stability
Number one Digimon fan FTN
I didn’t realise they transformed
into big ass mecha
🙄 it's called DIGIVOLVING
Does PS2 emulation (mostly JRPGs) need this extra thermal dissipation or should the solution on the 477V be enough? I'm really interested in this screen for JRPG gaming 😄
any idea how ds1 or 2 runs
BTW, while on the topic of PS3. My video for the 577 will be relevant here as well: https://youtu.be/GCjbqrcf9F0
👉 In this video, we make a return to PlayStation 3 emulation but for the first time ever, we will explore the new PlayStation 3 emulator on Android known as RPCSX (originally known as RPCS3) on Anbernic's latest Android handheld, the RG557 (and now the RG447M). The results are better than expected despite RPCSX still very much early in develo...
and Switch performance from the 477M/577: https://youtu.be/0MAXGUi56Aw
👉 In this video, we make a return to Nintendo Switch emulation using the latest version of the Eden emulator as well as exploring the capabilities of the Mediatek Dimensity 8300 and the new Anbernic RG477M (and RG557). The results are better than expected with the combination of Eden and the Dimensity 8300. We will explore more than 30 games ...
Damn, man. Seeing Russ's review makes me wonder if I should send back my 477m and get this instead.
(I kinda do like my slab, though.)
I'm really on the fence with both. I with the T820 had just a tad more power because either the Slide or 476H could be perfect
I've used these settings as well 👍
rg477v seems to have some new firmware sauce which stabilises the fps
Nice, this is a solid one out of the gate! I've been messing with it since yesterday trying to decide what video I'll do with it (got some ideas already).
my video is on the v1.35 OTA that was pushed yesterday
you might be on 1.33 or 1.34 if you just unboxed
Updated yesterday as well 🫂
Pretty stable now
So is the 477m released to patreon or still in beta testing?
No rush, just curious. I fully appreciate that you don't have to do this at all. Appreciate everything you have done/do/are doing @little orchid
My Rg477m stock. Don't know how Russ got that score
Stable… and noisy ?
tropical climate
Probably... Or the air intake blocked simply by leaving a flat console on a table.
lol I'm thinking you're right!
It will ramp up to max during a torture test, but not distracting IMO
ANBERNIC RG 477V will be available 2 days later.
Within 72 hours after the sale starts, you can enjoy an early bird price with a discount of $20.
Official Store: https://anbernic.com/products/rg477v
Aliexpress store: https://www.aliexpress.us/item/3256810046024839.html
Ebay store: https://www.ebay.com/itm/317667882604?nordt=true
Official di...
Does anyone happen to know whether the 447M was also available from a European warehouse on AliExpress right from the beginning?
I’ve never bought a handheld costing more than €150 before, and in this case I would have to pay the tax to DHL.
The 477M has been available from a German warehouse for quite some time now.
The early shipments of rg477v are going to be coming out of China most likely.
I bought my 477M when it was released from anbernic official store on Aliexpress so I can't speak for that but, in the past I also bought my Rg552 from the most random store that was inside the EU because I was also thinking about import taxes. Didn't had any trouble. Not tax payed.
@wet shale able to post an affiliate?
AliE link
https://a.aliexpress.com/_ExiXwmu
I’m considering whether it’s cheaper to take advantage of the early bird bonus.
I would have to pay the DHL import fee of around €7.50 (plus taxes), but it will probably get more expensive later anyway.
There likely won’t be any coupons available in the next few days.
I think Handhelds are import tax free in the EU
OK, I changed the thermal compound to Arctic MX-6, and spread it everywhere over the shield and CPU
I now get really decent lowest loop scores, essentially 3k consistently
So cooling is the biggest factor here
I need another @hybrid trail tutorial to follow like the evo 😅
Direct: https://rh-go.link/Anbernic-RG477V
AliExpress: https://rh-go.link/Anbernic-RG477V_AE
Ty for sharing the links
I would strongly strongly advise putty over paste
No worries. I prefer to use the affiliate ones though. I will click on that before purchase
there's mx 7 now, but still a paste
which putty? I think maybe a pad is better here
Still got loads of spare pads from my evo. Aya neo sent me too many when that all went down
Putty is a messy thing, no clue why people use it over pads
Honeywell PTM7950 isn't it
I would use grizzly thermal putty personally
Was super easy to do on my Thor and dmg with grizzly pro putty 🤷 not messy in the slightest
And far better than a pad
I was pretty close with my estimate, 223,39€ ain't too bad
just need a good coupon
problem is this ain't going together with the start of a sale...
let me know if you find one that works
Yep yep! We're getting our shill links prepped for the launch 
At $888 it's an easy recommend
Me too! Please share it if you find one
I wish we had more coverage of the black model
idk why Anbernic decided to send the grey to most people
Because that's what they chose to get
Reviers get a color choice
@earnest swan has a black one
since when?
For a bit
I hope they don't add shipping cost
He's been posting on his YT channel since he got it
He's had it for at least two days
Anyone in the mood for a 477V game test stream later today / tonight?
@cinder harness and I are feeling froggy 
I never get a choice, Anbernic just sends me whatever color 
If you don't like it, just send it to me 
@wet shale how big is the 477v sideways compared to a 476h? (pocket Ace is also the same size if you dont have a 476h)
trying to figure out if it fits a vita sleeve.
We'll see later today 
probably not, this is chonkier than a Vita for sure
the 467h already doesn't fit in a Vita sleeve, this is chonkier than that
it won't fit a Vita sleeve
fits in my vita sleeve just fine?
oh the 477v is thicker?
Just to triple confirm, definitely does not fit 😆
I love the design I wish they would use snapdragon chips
dang haha! 477h when??
If somebody would try out Skyrim (PC, either version) on this I would be a happy camper
I'm sure it runs but I saw some reports of the chip set having some stability issues in that game specifically
How many more places does Skyrim need to be 
Skyrim can be run natively 4:3 🥳
We need it on my microwave and then I'm happy
Bethesda's done it again. Don't miss out on your new dwarven mudcrab skin. Only 40 credits. Revealed at E3! WOW!
Obviously different device different chipset. But I’d say the most comparable of vertical devices when looked at side by side. Idk 🤷 maybe I’m wrong in saying that.
Also though….. I know if you search my name you’ll see I’m like the “unofficial driver” spokesperson 😂 really does show the power of drivers vs raw power lol
That must be suffering from similar thermal throttling issues because the g3x gen2 is a pretty nice chipset, should at least be on par with the Dimensity 8300 if not handily outperforming it
Let me see what gaming and balenced mode bring back. Apparently extreme may cause throttling
But yes these do seem low don’t they.
Already doing much better tbh switching to gaming mode.
Now I am happy
😂
Alright noted absolutely keep the dmg in gaming or balenced lol 😂
you sure you didn't had it in streaming mode during the first run? 
PO TA TO MODE
I was in the max mode lol 😂 on my first run
how the hell did it do a 1000 on the first loop with that, wtf
Unless the overlay was screwing with it????
Running it no overlay now too in max mode just to be sure. lol 😂 got me really scratching my head lol tbh
I mean, I would absolutely expect thermal throttling in max mode, but it should start higher than in the other ones 
I’d bet it was the ayaneo overlay doing something to the 3d mark software as my numbers are already looking much better with it off.
So very interesting though the devices are basically 1:1 with slight edge to ayaneo. And then again that driver support is just killer
I mean the D8300 is pretty close to the 8 gen2, but driver support is utterly lacking on MTK 
Literally a knife in mtks back when it comes to this hobby :/
Mali custom drivers coming next year trust
I hope so. That’d be insane and really put a lot of devices into competition that are being held back
No questions asked would give up the dmg for the 477v if it could play all the same games lol
nah, DMG is insanely comfortable, doubt the 477v can compete
Ok yup. I was doing something wrong or the overlay was cooking the results lol.
Absolutely more stable in gaming or balenced but that looks more right
I mean, the lowest loop is still higher than the highest in the other mode, fuck stability 
forget retro games, we are doing loops now
my favorite game is 3D Mark
Sorry I just wanted to compare vertical king numbers I guess
Specially after the weird wobbly start on the 477v numbers
Stubbs and Retro Tech Dad are back at it with live game testing for the RG477V, sent for review from Anbernic. With its massive 4.7-inch 4:3 display and the beastly Dimensity 8300 chipset, this is their best and most powerful vertical yet. This stream is focused on game testing high-end emulation (PS3. Switch, PS2, GC, GameHub + More), android g...
Going live in ~ 1 hour 
https://youtu.be/CCo-CfYJdKo
GammaOS is coming soon
please don't ask for ETA, it's coming, I promise
I would also LOVE to know how Bethesda games run on this chip set. My phone has the Dimensity 7400 and I didn't get good results there, though I'm hoping that was due to lack of ram
comparing the 7400 to the 8300 is kinda wild
seeing Odyssey running here full speed with native CRT/LCD shaders is some crazy shit
this is incredibly peak
like the 7400 is pretty much a 1100 or SD865... quite a far cry from the 8300 
Oh, well then that's good news for me I guess. I've been trying to decide whether or not to get this one cause I thought it was close in specs to my phone
Ahhh I see Skyrim on the stream, thanks y'all
nah, different ballpark entirely 
sheer performance of the 8300 is closer to an Odin 2 than an RP4 (your phone), the only issue is really MTK stock drivers
Yo @earnest swan how's the paint job holding up on your model? Some are saying that it's painted and it's wearing off.
Wait the 477v is painted,,,?
Reddit is saying the finish is coming off the black model
Weird.
@wet shale it's the DMG 476Hone that the finish came off
Zu has the black 477v
He's working on a video currently
He says plastic quality is good
Asked him if it feels painted on, he'll confirm
GOTY 🔥🔥🔥
No issues with rubbing.
Do we have price yet?
$199 8+128g, $239 12+256g - 72 hour early bird
starts 20th Dec, it ships immediately
How much if it’s after early bird?
219/259, early bird is -$20 discount
I don't get that feel at all. Kinda feels like the DMG but a bit grittier
The ergonomics of this are dark magic. It has no butt doots, and yet, I've had zero hand fatigue even after playing a ton of Final Fantasy 6 and then PS1 Spiderman
Stubbs mentioned that it felt a little like the 351v which I personally thought was the goat vertical of its generation
Pushing a first look video today hopefully
Although it's really just me waxing poetic about this 4:3 screen
you’re finally awake
I mean it looks exactly like a ayaneo dmg… is it really that super surprising on the ergo? And comfort? Just add a second stick… sorry… not to sound like a buzz kill.
it's okay, many people on the discord tend to be buzzkills 😄
all good 😄 I'm curious too!
Is the D8300 that much more powerful than the T820 ? My RG406V runs 80% of PS2 and GGC no problem, so I'm wondering if it's worth it to upgrade to the 477V
You’re gonna be able to upscale it all higher. But personally I’d say no. Ugh
I wanna love the d8300
But with drivers lacking :/ all that power is good for is upscaling the older stuff so sure you can play 4x ps2
basically 99% PS2 and GC games with 2x resolution upscale at least
Support your local driver dealer folks lol 😂
It can play GC / PS2 / Wii all upscaled , it can play the best WiiU games ( BOTW , MK8 , Windwaker ) , plays a bunch of Switch and some stuff like Tropical Freeze won't run because it doesn't have driver support , plays some pc games ( Masterchief Collection , Tomb Raider 2013 )
It is way more powerful than the T820 and that chip already got GC / Wii and a bunch of Switch light games covered
A lot of switch stuff won’t run that should though with that amount of power is all :/ it’s kinda a bummer
True. I'd still advocate that switch emulation is still just an additional perk esp on android, too many different variables. It's come a long way but won't beat a modded switch 😄
Idk I have like almost 50 games running including new ones
It really feels like less of a perk and more of a top end benchmark
Switch would be suboptimal on this device even if it had a snapdragon chip, it's a 4.7 inch 4:3 screen
I mean will anything ever truly beat modded oem
oh for certain, i have a ton of them running too
I mean fair argument. I for one am not an aspect snob. It seems silly to limit one’s self because of aspect
But fair argument
I just feel people put too much dependence on wanting switch emulaton on these things, as cool as it is
If I really want to play a Switch game and it will run it, I still would, but I'm not doing the full library plus cover art endgame deal
Fair!
Eventually there will be an "endgame" switch device (could end up being odin 3 or konkr even) but I don't see it ever being a vertical all things considered
I’m excited to have another super cool high end vertical. I wish we had drivers for mtk as it would even the playing field
man black is such a looker on this one
Black is way tooo hot to trot on this unit for sure. Blows the black dmg away big time. And many other black devices
I do wish they went with subtle matte rainbow on the abxy for the letters possibly?
I'm getting black but I do wish there were more colors
Somebody was hinting that there might be more
It’s so silly but on my 477m I hated the shine of the black buttons :/
Made them look less premium then if they were matte finish and I’ll say I feel similar here. Just go matte finish on them.
Fair!
but yeah I would have appreciated something more subdued than rainbow colors on the black
it's almost classy except for the face buttons
Yeah I'm doing a button mod on the black one for sure
https://x.com/tonchikiroku/status/2001981066698203253?s=46 this Japanese dude took a sweet photo
Black is 100% way to go
👉The Anbernic RG 477V is a vertical Android handheld built around one of the best 4:3 screens ever used in a retro gaming device. Featuring a stunning 4.7" LTPS IPS display at 1280×960 with a 120Hz refresh rate, the RG 477V is designed for classic games the way they were meant to be played — no stretching, no guessing, and no compromises. ...
what kind of sticks does this use?
i like the idea of it with a more retroid/mangmi stick look
same stick as always, you can just switch the caps
Live gameplay, reviews and advice. Feel free to ask questions in the chat or request games for the system that is being shown. Timestamps, setup and links be...
****Hub stream
So the back shoulder button are digital instead of Analog on the 477v according to Russ ? Or did I misunderstand
Physically buttons, not triggers. In the software can act as LT/RT though.
Are they pressure sensitive or just a regular single press input ?
regular
gotta wait for the RG477H to get proper triggers 
would be fun if it just looks like the 476H

except fix the start/select buttons
id pay $200
nah, same position, unlikely that Anbernic will ever move them
476H is OCD triggering for me
Black = fingerprint magnet
DMG = that black bezel
GC = skittle buttons / no yellow stick
did anyone mention black borders on the DMG 476h? my bat signal lit up
we were looking at those last night on the 477v stream
V ditched the borders, which is a win
You can replace the buttons and caps
They use the same ones as the 406H
I think Zu’s video on the black is best example. Look how that crt filter blends in with bezel 
I will take fingerprints for this level of immersion
timestamps up
Hades
Need for Speed: Underground 2
The Elder Scrolls V: Skyrim - Special Edition
The Elder Scrolls IV: Oblivion
Condemned
One Finger Death Punch 2
Peter Jackson's King Kong: The Official Game of the Movie
Heretic + Hexen
Outlaws + Handful of Missions: Remaster
Transformers: Devastation
Dragon's Lair Trilogy
11-11 Memories Retold
Resident Evil 7: Biohazard```
https://youtube.com/clip/UgkxWxThEqpOWhL4sbJOiWD0cCy69zP77Bl7?si=HSb3XPcXme2mNkT9
dunno why I said that 😂
60 seconds · Clipped by forthenext · Original video "ANBERNIC RG477V, GameHub Lite PC, Assassin's Creed and 14 games test (MediaTek Dimensity 8300)" by forth...
To smudge or not to smudge, that is the question
Vertical faithful, which way are you leaning - smudgy yet sophisticated black or not smudgy but getting a bit stale dmg?
in which timezone does the sale for the rg477v starts? it's the 20th 2am already 
so 11am for me, good to know 
I think Ali express may have it a couple hours earlier. Their daily system refresh is at 3am EST (midnight PST).
Do you save these on the internal memory or SD card ? Thought about buying an eternal HD to play these games on this device
no chance in hell that I will be awake at 3am EST 
I'm pondering this myself, I was originally leaning DMG because of the smudges, but after seeing a few videos with the black I'm probably going to get that. I wish there was a white option or a fun color.
this isn't Retroid tho, you can literally buy it on Sunday and they'll ship it right away anyway
I know 
Chances they sell out within like 10 hours of going live?
zero 
I’ve been waffling, but I’m leaning 70/30 towards black atm as well.
sub zero
negative even
I think we're in the same boat! I did the DMG everything a while back but haven't felt it lately.
Still Retro Power for me
I’m going to be up during release so I’m not worried, was just curious :p
I really want this, but I think I'll have to wait until the next version. I'm glad they are still making flagship verticals, hopefully they continue to do so
Also hoping that if this is more popular than its predecessors, then maybe there will be more competition in this niche of a niche
Not sure if GameHub Lite supports external storage yet
Black 😅 but i think i made that pretty clear with my example above 🤣
If anyone finds any voucher codes. Let us know 👍
Does anyone have a link to the case on anbernic website? Not sure if i am being blind but can’t find it
RH Links 
Direct: https://rh-go.link/Anbernic-RG477V
AliExpress: https://rh-go.link/Anbernic-RG477V_AE
- 8GB/128GB: $199 (EB) | $219 (Retail)
- 12GB/256GB: $239 (EB) | $259 (Retail)
Learn more: https://retrohandhelds.gg/anbernic-rg477v-pre-orders/
If you're ordering, what color and config are you going for?
it will be shipping immediately they have the stock in China
the initial batch is usually from China, I don’t have any info about Europe/US warehouses
I don’t have any info specifically but I think that might be the case
It will show $888 or sold out until pre-orders go live
The US warehouses will get stock fairly quickly I'm guessing. Check back in a few days / week.
I could be wrong and we'll see US stock much quicker this time though. 
I think it’s going to appear on launch
DECHUKD26
Works
12gb with bag
Uk only code from hotukdeals
UK peeps codes to try. Limited uses
£35 one already gone
Thanks 😅 i got it using codes above via AliE
£182 for 12gb with bag
I saw these codes and all the handhelds I need to get flashed in my head
😂 do it
I wasn’t going to rest till i found some codes 🤣
Doesn't work in Germany...
@left bridge heads up for codes above. Not sure if this is one you are getting
Sorry. Just saw your comment
Nice one mate! Think I'm gonna abstain... I don't really like verticals with sticks lol, and already have (and love!) this screen on a 476H... But ngl it is still kinda tempting lol
Haha as @earnest swan says codes can be used on other handhelds 😏😉
ANBERNIC RG 477V is available now!
Official Store: https://anbernic.com/products/rg477v
Aliexpress store: https://www.aliexpress.us/item/3256810046024839.html
Ebay store: https://www.ebay.com/itm/317667882604?nordt=true
Official discord group:
https://discord.gg/ek4FF7PyA9
Official facebook group:
https://www.facebook.com/groups/anbernic
CODE: IFPEHKZI
worked for me in Germany with 23$ saving
Nice
159€ but without tax. Plus DHL fee
Works in France too. But well, at the end, that’s more than the price of a RP6 when shipped with 4PX. I was not expecting that so I’ll skip.
Come on Anbernic, do something.
Plus on their website, they ask taxes while shipping to EU with 4PX. Dealbreaker.
how do we build strong europe if you don't want to pay taxes?
Why don't you use AliExpress?
how the hell do you end up with 159€? I only get down to 170€
Jesus
ehh, the price is kinda mid, 171€ + probably another 13€ in taxes and DHL fees if Anbernic cheats with the declaration... this is damn close to what I paid for my 477m, with a bag 
we need better coupons
Without tax
If I order from the china warehouse today would I be receiving it quicker than if I waited for US option?
yeah the entire thing is $255.83 for me to begin with 
This is just nuts honestly lol 😂
I looked for a different listing
there are only 3 and that already is the cheapest
then no reason you ever had to look at this in the first place 😄
my crippling addiction to buying more handhelds tho 
I only have the SLIDE, 477m and two 476h with this screen, need more 
$32 off using code AEUS32 (might be USA only not sure)
https://a.aliexpress.com/_mN718mD
I can get it for 198.32 was the lowest I saw 🤷 but I don’t need it lol
Nah you need to buy my ayaneo pocket micro 😆
same lol, just arrived today
but I'm probably buying this too because I have problems
two 476h? I thought you only rolled black
rolled another black when I could get it on sale for 115bucks (big fat coupon for this and a few other items + Ali on top knocking something off, iirc on the 11.11 sale?) 
oh shit, 115 is actually a banger price
anyway, now to decide whether to shell out for the 12gb
@earnest swan which sku did you get?
same as my rg477m I gone with 8gb, these devices are PS2 and under for me... and even then I rarely play PS2 
Anbernic sent me the 12+256GB Black
normally I'd be with you but seeing RE7 running so well is compelling
PS3 might be a little bottlenecked with 8gb as well, but not sure if it matters enough to bother
fair I guess, but I have so many handhelds that can do this 
well this is the first vertical with a screen of this size
and it will be used to play Gameboy games, just like my DMG 
no honestly, 8gb is enough for me
if anything I may rather regret for not getting 12gb on the Odin 2 Mini, which is my only 8gen2 device on that lil RAM
that one should be on the chopping block by now to be honest 
I'd consider selling it if I had one
nah, I like that thing 
ngl this does look the best of the d8300 anbernic devices so far
Looks like the cheapest I can get this for is $248
Are you in the US? USDEAL44 takes off $44 of the 12gb model @autumn tinsel
Well it's the one that launched with the least amount of issues
Ppl still sing praises for the 477M and the 557 was by far the bumpiest 8300 launch
It's better now
With or without case?
God damn it
Can’t use the code at all now
Told y’all it’ll be done by the time it releases
looking forward to retesting everything I already did
So is there any way I can read about what his software does to the 8300 devices?
I'm not too well versed in his OS.
The GitHub
Probably
Alrighty then
Does his OS get around the rooted shenanigans of the 8300 devices or no? I remember some android games not working cuz of it
GammaOS Next. Android 14 GSI distribution tailored for handheld gaming consoles. Sources: https://github.com/TheGammaSqueeze/GammaOSNextDistribution - TheGammaSqueeze/GammaOSNext
Thanks.
there’ll be some d8300 specific stuff, I’m guessing regarding cpu performance governor as that is the major fix
Most definitely
Yo does anyone else get notifications for messages being pinned lately
Sorry for the ping Stubbs
Yea but it's mainly been for this server
How does one disable that
I'm so stoked for this, I've been looking for a powerful 4:3 vertical that can play nearly all PS2
For 60 days after release @pastel hare
To use the OS?
I dont mind sliding him the cash
No, patreon exclusive for the first 60 days
Alright
Then it’s released to the general public
No analog back shoulder buttons kind of killed this for me unfortunately, hopefully the eventual 477H does .
Admittedly a very small and petty reason for most but not to me , good luck all
I hate AliExpress and they way they handle promo codes
You could try one of the silly STUBBS codes they gave us for the podcast (I think US only) 😆
$149-25: 【STUBBS25】
$259-45: 【STUBBS45】
I'll be 45 in 5 years
Which seller does this work for? Anbernic Official and Anbernic Direct says that STUBBS45 is invalid
Yeah figured, but tossing it out there.
These should work once the US warehouse listings go up.
Oh well
Anbernic direct I think we have RH or RETROHANDHELDS, but probably doesn't work on new listings like this
We have a bunch of new coupons Andrew mentioned that recently were added to https://rh-go.link/dills
And
RHSAVE23 works
done and added to hhd
IFPEHKZI also does $23 off @wet shale
are they stackable? 

Need to test if either can work outside US
And now either one isn't working
Ahhh my review device seems to be arriving on Monday!
Some wise advice on their email tonight. Price is killer for the hardware. I just want a more powerful rg476h though 
Just get a 477V bro
You’ll be waiting a long time for a 477H
I don’t think they release 8300 based handhelds back to back...so next month will be something else or nothing, and with CNY in Feb 2026 shutting factories down for about a month, the earliest a 478H would show up is Mar/Apr
Price of handhelds could also increase next year
in before 476V in January for some strange reason
I need to see what happens with this proton on arm stuff before I put big bucks in an arm handheld methinks
I would assume they would do a 578 before a 477H right?
A 558 would be pretty pointless
The 8300 has power it's just held back by usual software woes
Or maybe they would do something with a bigger screen and the 8300 chip
Yeah and the 557 also didn't do too well
RG 707 
557 suffered from the "first in a series" syndrome
And y'know typical Anbernic software fails
Mainly because it was competing with both the odin 2 portal and rp5
I think more with the Portal tbh
Performance wise the 557 kinda packs up the RP5
Couldn't use much of it when it came out due to issues with high performance mode though iirc
Yeah but compatibility kind of makes it hard to justify with a widescreen you would kind of want to play some switch on it, the d8300 just makes more sense in 4:3 handhelds as of right now
Depends if you even want Switch emulation tbh
For PS2 and other systems like it the 8300 is pretty good.
Plus it's not like the 8300 can't play Switch games. It can play a surprising amount. You just won't have the compatibility of a Snapdragon or the turnip drivers
Max Zhou said there wasn’t going to be a 477h… not that I trust him at his word
Yeah I'm not sure why mine is less stable than others. I ran the test again but left it in front of an A/C unit in case ambient temperature is the issue, but it's still pretty unstable.
Max Anbernic is a little silly
Hi Russ
Are you gonna revisit the 8300 devices when Gamma releases his new work?
Gamma said the D8300 line will get released tomorrow
Then I hope he sits his sick ass down and takes a long break
He needs a break
Brb looking to see if mine is as bad as yours
I win
ok what the fuck
What in the 1.21 jigawatts did you do to get that best loop score lmao
Isn't that different from wildlife extreme
oh shit you right
Anyway, yes guys all your scores vary because on the mediatek thermal_core/thermal_hal being suuuper agressive
Maybe I'll learn to read one day
Although, RIP at that stability score
This is why I need GammaOS 

Heres me dicking around with global shaders, with Azahar dual display
Ah hell yeah
Actually smooths out the crunchy textures a bit
Anyway, I'm getting pretty consistent results now in the exteme benchmark now.
I've tweaked/hacked mediateks thermal throttling HAL to not be a bitch.
what kind of watts?? 
jigawatts are generated when Gamma forces you to run in a giant hamster wheel, to power his dark android magic 
nah those are jiggawatts
1.21 jigawatts are 121 jiggawatts, so you better run fast 
nah, he's gotta fix the rg ds and whatever 3568 abomination anbernic releases in january 
are there any Ali codes left that work? I'm a little late to the party and I'm finding none are working now
well this sucks
I guess Ali saw a bunch of people using codes en masse and decided to turn them off
and here was me thinking I didn't have to rush to order Anbernic
He’s sick
Let the man rest
not much else to do in scotland I guess
how hard can you push this thing with the fan completely off?
(without thermal throttle ofc)
like if I care about geom deluxe + crt beam on fifth gen and down via retroarch do I have to ever have the fan spin up (those shaders are a little heavy)?
You’ll need the fan, but it won’t need to be that high
I may be wrong, I’m just basing that on the 477m, we can hope
I’m having the same problem
Ah what in the heck. Notifications for a message being pinned? That is silly. I wonder if it can be disabled from an admin level. That is not worth pinging anyone for.
Discord doing discord things
Where does it ping you. I've never seen that before.
Only on mobile push notifications, no trace of those under discord‘s notifications section ( there only @ mentions as usual )
I think it started like a week or 2 ago. It’s super funky
Yeah I don't see it either, that is bizarre
Hopefully being added to server options
Sometimes they use our server (and other partner servers) for beta testing and don't even let us know
How fortunate that I mute and supress everything
They used to assign a rep who would communicate changes to us, but they had a change in leadership or something and stopped saying or asking, and started just doing
They would ask if we wanted to participate in New features
It was chill
Anyone know if video out onto a 16:9 display from the 477v’s 4:3 works? Or would the video out remain in 4:3
In Russ’s review it stayed 4:3 with no way to change it in software
GammaOS might fix that
Oh ok thank you
Benchmarking / testing thermal throttling with the fan off, while I wait for the wife and kids
With no fan, and no thermal throttling enforced, I expect the device to shut down

Aaand dead after 4 minutes
I need to put a safeguard in place, just in case someone pushes to max performance with no fan
I don't want them to cook their device
I might just enforce the auto fan
I'll see..
Im planning to play retro systems like NES/SNES. Do I still need the fan?
Nope
might want to blur that map dude...
you'll have someone knocking on your door for GammaOS on Data Frog SF2000
I agree. Benchmarks are always max performance scenarios that produce heat. One of two things need to happen: Throttling or fan activation to control the situation.
Will there be a performance mode tuned to run as well as possible with no fan?
Yes, balanced mode will have this
Nice, I think I’m gonna cave on this since I love the 476h but also love verticals and want to run heavier shaders
wtf there are shaders that heavy?
News to me
yes 100%
there are shaders you can't even run on an s8g2
with like raytraced dynamic bezel reflections and shit
but geom deluxe is basically an sd865 and up shader
also the higher your screen res the heavier the shader becomes
yes, like Pope said some CRT shaders are very heavy duty and out of reach for the 476h
it was one of the main draws of the 477m, the fact that it had the power for the beefy shaders
I really like geom deluxe
with the phosphor trails etc
megabezel is also cool but only on large high res screens attached to real gpus lol
if you want really accurate emulation with high end shaders, you better use a gaming PC instead of any of these handhelds 
and a 240hz monitor 
but if you don't care about the portability of a handheld you are probably better off with a real CRT TV and a MiSTer
https://github.com/RetroCrisis/Retro-Crisis-GDV-NTSC
here you go, this can bring a good PC to its knees
sound like this place must be one of the biggest discords on the internets
I thought there were discords with like millions of people or something out there
then again a discord with a million people would probably be unusable
Who on here wishes Anbernic would release the RG477V- (- for no thumbsticks)?
You can get 3d printed thumb stick deletions
Probably just Pope and you 😂
No

I don’t see the point of having such a powerful SOC that can play systems that use twin sticks , there are cheaper handhelds with decent power with no sticks like the Retroid Classic if that’s what your looking for
Just so you can stack shaders to your heart’s content. For systems requiring thumbsticks I can use my Steam Deck.
You can do that with Classic
Retroid Pocket Classic? But it doesn’t have a 4:3 screen 😥
Close enough
True… will have to investigate
Plus it’s almost half the price
True!
I'd rather have thumbsticks because you can always remove/disable/ignore them.
I wasn't aware you could do that. Also, even though it's twice the price (and price is not an issue for me), the RG477V is superior to the Retroid Pocket Classic in these areas:
- Better screen (120Hz, and 4:3 ratio)
- Flat back and bigger (more ergonomic)
- GammaOS support incoming!!!!
No BFI tho in the rpc
BFI??
Black frame insertion
Maybe in this specific niche, but there are much bigger discords. We just helped them with beta features very early on and I think we're on some list, I don't know. 😆
*testing
The four largest discords
The classic gpu is trash, it can only run pretty lightweight shaders. Its screen also sucks compared to this one.
saying the LG Wing OLED sucks is quite harsh
Pope is very serious about his pixels
Cool I added a thermal guard now, so if you try to torture your 477V with no fan and max performance mode, you'll get throttled.
In real life scenario with PS2 emulation and heavy shaders, you never hit this. Only with the extreme 3d benchmark which tries to toast the GPU and CPU at the same time
My opinion, just stick with balanced mode + auto fan, you'll actually throttle less because you aren't pinning everything on performance governors, barely tickles the fan
Oh I also improved the fan, its much smoother now, barely noticable
What? The screen is literally a lower resolution than the Classic on top of being better in colors.
If you’re talking about the refresh rate or the size, then sure I could agree on that.
its an oddball aspect, way too small compared to this for 4:3 content, and 120hz, plus while the vertical res is a bit lower the horizontal res is actually higher and this integer scales way more.
the only thing the classic screen has going for it vs this one is oled, which granted is something some people put a lot of value on but the 47x screen from anbernic is a very nice lcd compared to most in this hobby
but yeah I've got a classic and a 476h and I would pick the 476h screen every time
Like I said, I can agree with the size and refresh rate being better, that definitely makes sense.
The 4.7” screen is still worse in color (and not just compared to OLED, I’m talking about even other IPS screens, assuming that wasn’t just from issues with early production) and even the aspect ratio on the classic works better for 8:7 and other taller non-4:3 aspect ratios so it’s not like it’s “objectively worse”.
Jesus dude
How do you even breathe in servers that big 
the fact that this is barely bigger than the rg405/6v is kinda funny
To disappoint many
There are two things I don't like in handhelds.
Black Plastic, and Glass Fronts... This is both 
I think probably 80% of my handhelds are black and at this point 30% of those have glass fronts 
I feel ya, but I’m getting so sick of the dmg color they offer, I wish they had made a white version too, or something, anything

They have had a lot of good colorways this year across their devices. And they've chosen the most boring (and imo worst) two for this one
Aside from price, any reason to order this on AliExpress as opposed to the anbernic site? Shipping times the same?
AliExpress is usually faster 
they did the most commercially viable colors for the 477v tbh, black simply is the default most people get and DMG just fits for a big vertical and is nostalgia bait
maybe we will see another color at the start of next year, like with the 34xx... Kiwi or Dandelion would be good 
Commercially viable? Sure
Enough interest to draw in more people? Definitely not.
just because you want a green one 
i think they did a good job w the 2 colors but if they were to ever release more colors id love a transparent purple 😭 but im dreaming
oh god damn no, fuck atomic purple sideways
Ali has free returns. Good luck returning something to Anbernic.
Ah yes. Great reason
yeah its wild
goddamn if they did a 477v in the gbc kiwi or the red gbp
I asked for wood rg477v
oh god, especially if it were a darker wood than the 405 one
it was the first question I asked when they said they were sending me one
the response was: "no"
like imagine
I don't even want a green one
I'd have just been happier with more or different colors
the face buttons need to be green too tho
Still having trouble with front glass 🤣
I wonder what gets cut first when resources are thin - memory configs, colours etc.
We do not let members of the cult sell their devices
honestly, not bad, albeit I think Anbernic would use all grey button and stick caps
This i would buy 😅 anyhow enough AI slop
death to clurple 
I will never be complete until we get a full glass front woodgrain chonker
I guess if they do it, it will be on a lower risk product
wow that purple is cool B) i think the woodgrain is also a top tier suggestion too
btw, now that Anbernic has Christmas sale coupons I can buy a 477v for 167€ instead of 171€, should have waited, but oh well 
(without paying vat and DHL fees of course, those will be ~40€ on top if paid properly, but as Anbernic usually declares lower value it should be ~12€)
I'm running this right now, in both performance and balanced mode, with global BFI. Temps are low, and the fan barely turns on. We gucci.
Even MGS2 at 2x the fans barely on, 477V handles it like a champ now
tdgsi_arm64_ab:/ # MONIOR_ONLY=1 /vendor/bin/setfan_auto.sh
CPU=62C GPU=57C -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=72C GPU=58C -> set persist.gammaos.fan_mode_auto=cool (temp=cool) lim(cpu/gpu)=0/0 cdev_active=0
CPU=70C GPU=NAC -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=73C GPU=NAC -> set persist.gammaos.fan_mode_auto=cool (temp=cool) lim(cpu/gpu)=0/0 cdev_active=0
CPU=69C GPU=59C -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=72C GPU=58C -> set persist.gammaos.fan_mode_auto=cool (temp=cool) lim(cpu/gpu)=0/0 cdev_active=0
CPU=69C GPU=59C -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=72C GPU=NAC -> set persist.gammaos.fan_mode_auto=cool (temp=cool) lim(cpu/gpu)=0/0 cdev_active=0
CPU=67C GPU=56C -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=87C GPU=63C -> set persist.gammaos.fan_mode_auto=max (temp=max) lim(cpu/gpu)=1/0 cdev_active=0
CPU=66C GPU=67C -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=71C GPU=67C -> set persist.gammaos.fan_mode_auto=cool (temp=cool) lim(cpu/gpu)=0/0 cdev_active=0
CPU=68C GPU=68C -> set persist.gammaos.fan_mode_auto=off (temp=off) lim(cpu/gpu)=0/0 cdev_active=0
CPU=72C GPU=67C -> set persist.gammaos.fan_mode_auto=cool (temp=cool) lim(cpu/gpu)=0/0 cdev_active=0
i already have the rp classic but the black for this looks CRAZYY good
kinda tempting
Soon™
i thought metroid needed analog triggers 👀
I can't believe I ordered in the exact 24 hour window in maybe the entire year where Ali coupons didn't work
certified sucker
wait, you ordered it without ANY coupons?
they weren't working yesterday when I got around to order
there was a window where they disabled the previous ones before these christmas sale ones were up
oh well
at least Gamma is cooking like a madman
I bet they haven't send it out yet, you can cancel and just place another order
as long as they haven't shipped yet, it will just be as easily cancelled as an Amazon order
I’ve done it so many times
Trust
You should get an email very quickly thereafter saying it’s cancelled
actually people were complaining about the triggers but what was the issue again
i thought u needed the full range to aim in metroid or lock on stuff
idk what other issue there was
