#Anbernic RG477M
1 messages · Page 5 of 1
true
I retract my comment
kinda sucks that YouTube has become the only medium possible for someone to review things
like I can still read words
I'd be happy to read more long form written reviews from people that wouldn't otherwise have time for YouTube
I mean sites do exist just harder to discover that kind of content now
thanks google less viable blogs more SoE spam
when cheap AI edits look better than Anbernics professional color choices
Classic gunmetal would’ve been nice too
red looks sick
you forgot to make the buttons inexplicably rainbow colored for some reason
Yeah we need this
CRT Royale + BFI
If it was done perfectly it could be a nice color/theme for neogeo
There is a reason why black is so popular
Yeah, people who don’t like black can buy this
to be fair i think they make those for girls
What games qualify as "girly"?
Kirby, cuz it's pink and not white anymore 
the kirbs speaks to them on an emotion level
the kind of level that desires to swallow entire icecream cones whole
super princess peach?
was designed to appeal to girls but it's actually a pretty decent platformer
I've actually played that game. It was an okay platformer
pretty sure more dudes played that game than girls 
Hamtaro
Ima play that game brb
The Sims
how hard does the fan run when using royale shaders?
see, all they have to do is make a plastic edition and then they can ship all these fancy colors
I have it off in normal performance mode
this may be a dumb question but if you sprung for the higher ram, would that affect how much it needs to push and therefor how little you need to use the fan or say, mid tier ps2 games? or is it irrelevant
I think it would be irrelevant for gc/ps2
Probably only matters in switch or Winlator type situations if anything
yeah, 2 things i will likely not bother with on this.
100% irrelevant
GC/PS2 already stay under 8gb ram, so giving it more RAM does basically nothing
the remaining RAM just goes unused but that's it
vast majority of people should not buy the 12gb version tbh
that model is just there to upsell you a more expensive version of the same thing
got your pocket evo for that!
What about wii? Is that also fine with 8gb
Yes
@lavish carbon did you have a cold when you recorded your review? your voice sounded a little different
The problem is people would rather not read and figure things out. How many times do randos walk in asking what the soc is and if it's powerful or not while refusing to read the spec sheet in any way.
it's true, there's a small % of people that still knows how to read but we are sadly in the minority
and, of course, there's no $$$ to be made if you make content for the minority
Like when the helagaly pi and e6ultra dropped, it was a daily challenge to convince discord users that the a527 isnt the rk3566, simply because they were more resistant to reading than just gobbling down zu or Russ banter
This is the all new ANBERNIC RG477 and they knocked it out of the park with this except for one small annoying issue. Powered by the Dimensity 8300 Processor, 120Hz 4.7" 4.3aspect ratio screen and an all metal CNC Aluminum alloy shell this new retro handheld is shaping up to be a great retro console for sure.
Buy It Here: https://anbernic.com/p...

I don't know if it's allergies or not but nothing major. Surprised I sounded different tbh
Desert Bus on the GB is 40 hours. New test for Russ - finish Desert Bus on a single charge.
This thing went almost unnoticed by me till now, only because I stumbled across two videos...
One of them was from Joey and touched on the subject of gamma os..
So... Is there any word from the man himself when it comes to this one?
If gamma is on the table I'm really considering this handeld...
Negatory on gammaOS right now
Ty friend... Back to searching for the next one 😂
Gamma is always cooking
Android just needs a game mode like the Steam Deck
so a launcher
too bad we don't have 4345 of those
It’s more than that because it minimizes background process to the bare minimum and as a result can run windows games better than more powerful handhelds at the same power draw.
fair, Android as an OS does take up some resources and could be optimized in a true game mode at the OS level
it's nowhere near as bad as in the PC world with Windows though
The Xbox Rog Ally will be interesting because it comes with a gaming optimized windows os that might be available for other PCs too.
yes, software wise the Xbox Ally is the most interesting attempt at making Windows good for gaming yet
🤫
at this point I'm inclined to believe that you have a CFW sweatshop in your basement 
Okay never mind I was wrong
Thank you for bringing a little bit of Monica in my life
pro move: reduce rgSlide price to 139usd. instant best 4:3 pocket handheld
eh the slide doesn't provide much function, its not a phone. its thicker and even heavier than the 477m
hopefully we see this function on more devices, i have a flydigi Vader4 controller that does this but it'd be nice to see this on the 407H
@topaz ermine you're the best
Does anyone know if the fan can be user-replaced with a different brand model that has the same specs but is quieter and less whiny, while still fitting in the shell?
6 hours babes, setting my alarm
Oh yeah I know I talked a lot of shit but I’m ordering the 8gb bleh bronze the second I wake up
I had to replace a malfunctioning fan on my SteamDeck so I imagine this won’t be any harder here.
Excuse you, the TRDR Pocket II exists
WTS TRDR Pocket 2
The AI translation is like systemwide and can be used on any text on screen?
Hmm really struggling to decide between keeping rpmini or selling and buying this
How long will the early bird price run for?
2 or 3 days I think, it’s super short
I’d say for $20 difference it’s worth it for the bigger screen if the mini is too bulky
Holy shit, nice
Going on sale in a few hours. 
https://retrohandhelds.gg/anbernic-rg477m-launched-everything-you-need-to-know
Anbernic RG477M
Direct: https://rh-go.link/Anbernic-RG477M
AliExpress: https://rh-go.link/Anbernic-RG477M_AE
The article won't show up until 3am pacific either 😆
235€ for the 8/128 model, not as bad as I expected it to be
doesn't ships to my location because Anbernic doesn't sells 200+€ devices via Ali to my location for some reason tho 
After much deliberation, and ultimately not being able to get past the Skittles buttons, I've also decided to jump ship to Team Chocolate.
But so help me God, those stick LEDs will never, ever be turned on
bet they will turn on when you first start up the device, you already lost that battle 
is the weight a big issue for this?
isn't this lighter than the RG SLIDE? 
I can probably nab this for the presale price (220ish) so I'm thinking very hard lol
355 grams
Made some comparisons and the screen is taller than one both Flip 2 and the Odin2 Mini, yet still compact because 4:3, that was a big factor to go with this
my heaviest console is the Switch OLED lol
at least it’s still lighter than the SteamDeck lmao
for sure
just wondering whether I'd get hand fatigue from playing with this for significant stretches due to its weight
Slide is like 380g, Odin 2 Mini 320g, so yeah slightly heavy chonker 
I would probably rest it on my legs playing
mm
but I think this will be fine, it's not like an x86 handheld
the Ayaneo Slide is a fucking 650g brick and that is also okay to hold 
Lenovo Legion Go is 854g, how high can we go with “handhelds” lol
I would love to test it with that screen size thought🥵
laphelds
What’s the shipping to uk from the anbernics website usually?
In native 4:3, games will look bigger than on a 5.5" 16:9 screen
how does this feel on hand? does the weight matter a lot?
I call it the “IMAX” experience🤣
That's not me, I wish I had one right now 😂
like 0.2 bigger
Meh goes up to £215 shipped with tax
281 total on ali with the $30 off coupon for top spec
That’s good, brings it to the same price as the base
Yeah for me it was $244 for the base with bag and some additional stuff to trigger the $30 coupon
Samsung EVO SD Cards good? Amazon has a sale on the 1TB ones
I just got reminded that I used one on my Switch few years ago and it still runs well.
Haven't had any issues with them myself
GBA still has the upper hand on a 5.5" 16:9, however
yeah but it's not just the raw weight what matters but how dense it is and how it's distributed
for example the rg351mp is just 260g but felt super dense and heavy to me
to the point where a switch with joycons attached (~400g) felt more pleasant to hold than a rg351mp to me
I think I’m holding off with the low-profile sticks and see how I like the existing ones first
I’ve not heard anyone mention anything negative about the weight I don’t think? In terms of being comfortable too
Just realized I accidentally got a bag so it’s actually 271
a couple people have mentioned that a plastic version would be nice but yeah in general nobody seems too concerned about the weight
take away is that you notice it but that's it
however if you didn't like metal handhelds before I doubt this one would change your mind
the coupon didnt work for me for whatever reason but whatever
at least with ali its easy to cancel if you mess up
now...we wait
it usually takes weeks for a product to get here from China, my first time trying with Ali express hope it arrives at least close to the 12th and not a month later
they give you a dollar back if its late? 😭
What’s the $30 off coupon?
USCD30
Oh £175 after price adjustment… tempting
ooh that is more reasonable
price adjustment is just your import taxes not being collected by Ali, can still happen when it comes in
Booo
Last time I ordered Anbernic devices earlier this year they arrived around a week later in the states. I was suprised how fast it was.
and they did come from China
I’m not in a hurry because now I have to learn how to use and setup an android lol
What part of US?
West Coast
fortunately its not too hard to setup 🙂
So if I get some front ends and emulators through “alternative” methods and then buy the legit ones later to get updates I’d have to set the configurations up again right?
Anbernic RG 477M is available now!
Official Store: https://anbernic.com/products/rg477m
Aliexpress store: https://anbernic.aliexpress.com/store/1101412986
Ebay store: https://www.ebay.com/itm/317125729663?nordt=true
Official discord group:
https://discord.gg/ek4FF7PyA9
Official facebook group:
https://www.facebook.com/groups/anbernic
said fuck it and ordered the 8/128 in bronze on Ali for 185€, let's hope I don't get vatted 
What seller ?
It'd be 190€ for me, but I'll wait... apart from the screen and shoulder buttons I don't like anything on this device...
Anbernics official store
Thx, lol 55€ shipping to France 
sounds like a good case to just not buy it at all 😄
I'd like the screen in a more imaginative housing... And maybe more colour options
Are we cheaper on Ali or anbernic direct
always Ali
no US on anbernic direct so ali has coupons
What’s the recommended coupon
if its all coming from CN anyway might as well save the $20+
depends if you want other stuff or just it
For me it was 181€ after discounts on AliExpress.
Bit the bullet ( faith on Gamma)...
Hope it doesnt bring VAT too, first time ordering so early and from theyr ali store
No worky in my region Sadge
check the front page then
if it doesn't gets vatted it's an okay price, if it does that will be easy 45€ on top, making it a tad more expensive than I would like 
it will have local codes
Bronze or silver
flip a coin
bronze, if not for the skittles silver may have been an option 
id lean bronze as well, sliver seemed like a reflective nightmare
Still trying to figure this out
$230 shipped to my door not bad at all
Yeah, still better than it would have been on the anbernic official site, it was 257€...
Anbernics official site is always the most expensive
185€ is actually pretty decent if you don't get hit with taxes
Not when I bought my 406H
Or 34xxSP
yeah, I think so too
naturally only worked out that way because I could apply a 30€ coupon, but still
you ain't European Sniffs
I side-loading apps easy?
Yup
No I ain’t
it's Android, side-loading is what we do 
you won't regret this purchase imo
Are you getting free shipping for other eu countries ?
there is no free shipping, Anbernic literally has two listings
one at 235+17€ shipping and one at 251€ 
the one with shipping included naturally is better as you can apply higher coupons
Can you send me the link?
I’m already in bed but guess I wont sleep for another 38min 🥲
Anbernic's latest handheld is an excellent retro gaming handheld, but there are many other choices out there. Let's compare it to the current mid-tier champs: the Retroid Pocket 5 family.
Buy the RG477M:
AliExpress: https://s.click.aliexpress.com/e/_oCeLFeJ
Anbernic direct: https://tinyurl.com/RG477M
Retroid devices: https://tinyurl.com/Retr...
GammaOS eta? 
Hope a fix for coil noise and rumble comes soon too.
Yeah this calls for an encore 🤘
No ETA

Man those hypestix from Russ’s video are an instant buy
bronze gang
the ultimate "Just get an RP5 bro" video 
I’m gonna play GameCube on this thing so hard
I kind of agree with Russ on the main point of the video, rp5/flip2 is the ultimate all rounder...
But...
My Daughter took my rp5 since it arrived so I need something that can PS2 and GC confortably 😂
Mario Kart Double Dash!!, the only game all my GCN capable devices get to see 
Pokémon colosseum is that game for me
nah, that requires too much time to fuck around with, hop into MK DD!, drive a cup or two, shelf the device, buy the next 
Your daughter has good taste 
Shit I played colosseum on my 405V
i went for it. excited to play retro games with some heavy shaders and bfi
gosh how I hate XD
Colosseum is 1 of the best Non-Main pokemon games
it is the best non-mainline Pokémon game that actually involves classic Pokémon game mechanics
colosseum is good shit
and it's better than half of the mainline entries, let's not kid ourselves
Gamefreak sucks
I was running that game on my RGB30 w/ ArkOS for a while
Yeah genius sonority games were great
Damn even ETA is saying the fan noise is bad on high mode , he never complains so it must be bad .
Phawx said the sane though
I’ve beat colosseum dozens of times
same, abused it to the point that I filled the Gen3 dex 
At least Anbernic "Could" send out an OTA and fix it. At least Retrlid did that 
XD is good
it is not
Fixed a lot of the shit colosseum did poorly
It is
give me back the edgy teen protagonist on his motorcycle instead of the shitty kid on a scooter
Colosseum 2 coming out and not XD 2.....says it was the better game 
Colosseum 2?
This is a scam
$300 in europe for the base $220 model
$78 taxes and shipping insurance
Damn that sucks
I only paid $230 in USA
go via Ali, it's 251€ and you can slap a 30€ coupon on
also if you are lucky you won't pay the tax as vat isn't pre-collected
Must be a schoolyard rumor cuz I ain’t seeing it anywhere lol
I paid 185€ and hope for the best 
Probably lol. Or just over Hyping nerds trying to Wish it into Exsistance....like someone else we all know 
All I see is “colosseum coming to switch 2 NSO”
Granted the game coming to NSO pretty much squashes all hope of a colosseum/XD remaster
But, it would indicate a Potential for a sequel if enough people are actually giving it play time
255 is the che@pest , where is 251?
Oh, low tax country 19% , mine is 21
there we have the difference 
There are 5 stores, 4 official ones , 1 normal anbernic
Wo hast du ordered?
Wait, fr?
No
Just a Bunch of mis Placed, weird internet Nerds making alot of Noise with nothing to stand on.....kind of like someone else 
Can you send the link ?
How? ._.
Tell us
So it ain’t real ._.
Yea, I'm sorry....I fell for bad internet rumors. That is 💯 on me. I love that game, so I was willing to believe almost anything 😭
Less than 150 sold so far
They’re not selling more than a few hundred the first week
That is the best , after that it goes down fast
that’s one store (taobao) in China
500+ units sold in about 4-5 hours seems more than the average Ayaneo release
it’s doing okay
Can you send the link ?
477M hype is real
Maybe it was about coliseum coming to switch online 
That’s all I could find
Wonder what the max FF speed this can push in Colo and XD is
I used the choice cupons available for everyone, and had 9€ on refund value, a link wouldnt get you far, go to anbernic official store on AliExpress and then apply all available discounts.
Even then I think it's worth it
I guess there are discrepancies between EU countries, I get a whooping 55€ shipping fees
1588 yen is 189 euro. We are being charged $300
That why only 150 are sold in the world ex china on ali
the listing for 251€ including shipping - 30€ coupon, -36€ vat = 185€, either I am lucky or I will pay 36€ vat and 7.50€ for the privilege of being robbed at my door step 
With us the vat is automatically included
How are you able to get it taxfree?
it's over 150€ for a single item, then Ali refuses to collect vat here at least
or with Anbernics store to be specific
honestly I will be surprised if it arrives without the extra vat for you 😄
taking the gamble for once, some people already got lucky after all
If i click on your link i get 255 euro, if i go vpn and germany i get 251 euro
Why are you looking at USD ?
I dont get the ex vat price
That is what the anbernic site is giving me
different country, different vat, different store policies
Ali to Germany is kinda "special" 
When you click the link, do you see 251 euro or lower?
we aren't able to buy A LOT of stuff from there
250,99€, the vat is removed at checkout
Dann werde ich das auch versuchen!
€ 210 in Portugal
the black magic of playing the vat roulette 
At least Anbernic is getting smarter about releasing their devices, now they do it when Choice Day is in full swing and we can apply coupons 
I think the bronze 8g is sold out on ali - edit: I was looking at a different listing
€235 in UK on that other listing
This is 235 USD for me
yeah we have shipping and vat included, so prices differ, if you remove vat from the 250,99€ we sit at 212€ which is about 245usd, guess $10 are shipping 
$292 for me
Gott strafe England 
It also doesn’t specify which model it is. I’m assuming it’s the base model
This is my first time hearing about vat being removed.
I thought its always pre-applied
vat is meant to be preapplied for UK
nah, above a value of 150€ they can do this, not all stores do tho
Anbernic has been doing that for a while, but with the cheaper devices they released previously I wouldn't take the gamble on paying DHL 7,50€ 
How’s been the experience so far with dodging the bat roulette on more expensive Ali purchases
only heard from some people that they got away with it, but I haven't tried it myself yet, so I can't say anything definitive
but I guess with stuff just being spot checked and me obviously not going with DHL or FedEx shipping, the odds are in our favor 
Oh of course it’s like retroids Shopify store
So I let you be the guinea pig and hop onto the next Ali sale
exactly 
I need to be strong
nooo, I need you to be the control group 
Don‘t make me slip up
It's good letting people be the risk takers 😄
I mean 45€ ain't going to kill me, but I will take every opportunity not to pay tax to my government 🫡
also they intend to take on 176billion€ new debt next year to finance their insane spending habits anyway, regardless of me being vatted or not 
(yearly budget they have is like 450billion or so... sooo... that's quite a bit)
Same but I’d feel stupid as sht buying a 4:3 handheld for 250€
230€ if shit goes wrong, but yeah 
well, this is pretty much endgame 4:3 so whatever, YOLO
True but ppsspp and Wii are my most played systems ._.
why do you even want a 4:3 device then? 
It’s like the perfect game of the month machine
That’s not big as sht
honestly a high power 4:3 is exactly what was missing between all the 16:9 and some odd aspect ratio devices
For the next 7 months that is
probably yeah 
tho I don't think the G2 Gen2 will necessarily be more powerful than the D8300
do we have any benchmarks on that one yet?
Ok, paid @eager pelican , 185 euro
It’s just weird the made the triggers inline and sticks bottom for it
Should have been done for the 406H instead
That is better than the $300 anbernic wanted
control group acquired 
Or the 350€ on Kleinanzeigen
5 stores on aliexpress, bronze base model sold out in 4
Can’t buy 2nd hand in this country 
Only 1 store has bronze base model
honestly, I'm fine with it, like not too many need analogue triggers anyway and I prefer d-pad centric as I mostly play those systems on these devices... like the Ayaneo Pocket Ace got bought just because of that 
Almost forgot you’re ballin like that
for 319€ you could get the 12/256 model on geekbuying 
Second hand is always expensive because people „made the effort to import“ or overplayed dhl 
Yes it is in 4 stores, only 1 store has bronze base in stock
But…. Shipping after aug 13
Others are shipping between 8-15
nobody wants Silver or the 12/256 model 
@lusty star buy one before you are stuck with those options 
Be quiet devil
Endgame 4:3 till 477V that is…
Only possible upgrade I could think of otherwise would be a 1440p 4:3 screen
I‘m not upgrading every few months, so I can’t let Retrois ceo let this house get mortgaged for nothing
Or maybe I buy it and sell it again after buying a mini v3
Tempted to upgrade with new tariff noise, and that this is nearly 3x faster than the T820 rolling around on the slide.
Damn it anbernic
960p screen with the muscle to back it up was an insta buy for me
did look nice
what if the Mini V3 is bad and only has a 4" screen? 
I really want to buy it but would prefer the feel of plastic and would also like different color options. Hoping for that in the future
Then Retroid‘s CEO should take out another loan
no more houses to mortgage 
Most of the reviews are saying the 8300 is overkill, thoughts?
come on Jigg, just buy it, give in, you can't resist the temptation 
I mean technically you have a lot of headroom with that chipset, which Russ kinda sees as a positive as you can run pretty much all of GCN/PS2 without having to fiddle with the settings 
and we only upscale to 2x on that display while the d8300 certainly could push for 3-4x with many games
I think that’s my draw to it too, is with the raw power it just works
I can, I also have exams until 09.20
So Ali sale in October it is
Ofc I hope retroid or ayn will announce something until then
I imagine they will, at least retroid
I doubt they come up with a 4:3 device till then, but welp
Also the new mediatek collab could see this chip soar even farther
yeah we really need some driver improvement on Mali
the collab could really make these new anbernic devices shine, will see what happens
I’d rather have overkill than not enough power
the Slide is indeed kinda underpowered for the screen
Yeah
the t820 is more fitting for the 720p panel
A 477V would be everything I’ve ever wanted in a handheld since I first got the 405V
why are you so set on verticals? 
Cuz they’re better
I honestly would only look at the 477V out of curiosity but certainly continue to use the 477m
I would be up for a 447V one of the main reasons I like the slide is the V factor when open.
I bought a grip for the Slide, that will be my 477V then 
Fancy pants
960p with a T820 💔
I mean, it works if you don't take GCN/PS2 into account 
The T820 honestly does more than I need - except it’s locked out of Fortnite and Diablo Immortal
Fair enough
Ok, to those who want BLACK : this is the trick. This a spare rg353M shell , purple.
Now Black
A $2 spray can
Spray paint feels gross in the hands
We should buy a lot of shells and have them blasted and re-anodized lol
I should have removed dus better
only thing I will spray paint will be the rg34xxSP buttons 
spray paint is acrylic, which is...wait for it... plastic
Looks like there is a place that will color it near me but I honestly don’t think I’d go through taking the front off
Spray paint feels better if you clear coat it and then after clear coat is dry, rub down with a cloth
Matte clear coat
Color is the least of my concerns, top of the list is making the sticks lower profile
I don't think 1mm is worth the effort tho
184 euro for the rg477M on ali for europe
30 euro discount ali plus 1% coins ( 2,56 euro)
im not getting that luck here in UK, seems to be higher for us 😄
you ain't getting vat removed, which we could still be charged if they spot check our orders 
that'll be why 😄 hopefully you guys manage to slip through!
I ain’t talking just 1mm boy
that's what we are gambling on, fuck taxes 
Think I’ll stick with my rpmini and see if they bring out a 406h successor with this screen and chip. Though I do think this device looks great
Max Says No
How many of his “no’s” have been lies tho lol
Yeah we’ll see, with the amount of devices they release they’ll be something close eventually 🤣
the question is rather what we will get
a 477p, which is the same device as this just plastic
or a 477h, which will have ergos, stacked triggers and stick on top
a 477v seems pretty certain tho
they gotta use this damn screen to death
I’d like to see someone playing shmups on the 477m rotated 90 degrees, see if it’s comfortable which it could be with it being flat
Wouldn’t a 477v be massive, the 406v already looked almost too chonky
they could do this layout 
steamdeck vertical now with expanded room for sata harddrives 
Wish steam deck had 960 vertical resolution and 120hz
I’m hoping the deck 2 is 1200p 120hz OLED
Or even better would be 1600p so you could integer scale 800
Would definitely be nice.
shoot me
That is a 4 inch
The 4,7 inch v would be laughable
Good
Offer it in wood grain
Fat gameboy funny
I have both the 405 and 406v
I would buy a a 406V replacement with 4.7” no questions asked
I love fat gameboy so much
behold the fatbernic477v 
Would
So bronze seems more popular. I think silver looks way better imo
maybe if they didn't do skittles
Silver looks a bit unfinished imo
as things stand the only thing silver seems to do better is to not have the stick-leds stand out as much
the white-ish plastic really looks wrong on the bronze
Imagine that big one in wood grain
NO WOOD GRAIN 
With proper tweaks
just needs anbernic to fix the governors etc
Anbernic and fixing stuff, right 
I think I will run it on my phone just to see how that performs 
stock score: https://browser.geekbench.com/v6/compute/4548339
Benchmark results for an Anbernic RG477M with an ARM ARMv8 processor.
RG557 still scores higher
https://browser.geekbench.com/search?k=v6_compute&q=Anbernic+RG557
Bronze winning
By a mile
Mad
That’s what I’m hoping for, basically rg406h successor that would be my 4:3 endgame
That's almost exactly what I was getting with my RG557 (in high mode on - well obviously - Anbernic firmware). Was the 477M worse out of the gate?
Is that with the vacuum cleaner running at full power?"
Oh wait ... Maybe RG477M review units didn't have the firmware "fix" that the RG557 got recently via an OTA update?
Would be wild if they didn’t, considering that’s the exact thing that got them so much shit in the launch of the RG557.
Well that would explain the performance in that snap from the RGC review that Gamma posted a bit ago.
My phone scored a whooping 2940 btw 
Pocketability while still having a taller screen for 4:3 than any of those devices is what sold me, I already have a SteamDeck so that’ll do for now, if I get the Flip later they might have solved the hinge issue by then too.
I want the 477 to be my retro island-handheld
I heard there is a firmware update coming but I don’t have the ETA.
The RG Slide is the pocketable one, but everybody seems to want protruding sticks to catch on things in their pockets these days ... 🙃
they literally give you the option to pop the sticks off
I don’t like the white color, it looks like a prototype phone from the 2010s
if the sticks are an issue with my pockets I get the low profile ones
So if I have to take the sticks off and store them somewhere and then get them out again when I want to play PS2, then it ain't pocketable.
I mean, I guess the 477M is pocketable in the same sense that the Odin 2 Mini is pocketable ... if you get a clipshield for it.
First thing im doing is trying to stick mod this
9% bigger area on the 4,7 inch
Oh wow a whole 0.12 inches 
Odin 2 Mini is much less pocketable, I was looking at that too, 477 is just a tad larger than my Pro Max
What site is that?
9% is pretty noticeable with that size, I saw this with the iPhone too when they increased the Max size a little bit
Nm found it
Welcome to the same world RP Mini fans were in before the device even started shipping yet.
Okay but that was diagonal size not height alone
Oh I’m not saying it as anything more than a genuine warning for what to expect.
This device actually shows a slightly bigger 4:3 image than the RP5/RG556/RG557 rather than a slightly smaller one. So new territory.
If any of these companies makes a handheld that has a 3:2 or 5:3 screen where the size for 4:3 stuff ends up being bigger than this while also being better for wider content, then buckle up, because it’ll happen a lot more often once that happens.
And it’ll be very annoying having to explain almost every time how “you’re not just interested in the size of the screen but in the other features it offers” (OLED for the Mini, 120hz for this, higher resolution for both).
This is why I play PS1 and PS2 games on my Legion Go. It has a bigger image for 4:3 content AND a higher refresh rate. 🙃
The go screen is so big and good- I don’t have a go but I have a y700 tablet with the same screen
Have the g9 controller case en route to turn it into a handheld
7.77” of 4:3 area
It makes Colony Wars look so beautiful. I mean, CW doesn't look BAD on the RG477M/Slide screen, but ...
At the very least, the screen size required for a 3:2 screen to be at a comparable degree for 4:3 content would need to be at least 5.2”, which on 3:2 would already potentially be too wide to be pocketable if this is already barely small enough to count.
My other Ali orders I made at the same time have been shipped but not the 477, that was an hour ago🤔
I wonder if anyone else’s here has been shipped yet.
Shade and sun, perfectly useable if there’s a bit of shade, screen is bright
I ordered the same one, but the white plastic does make it look ugly lol. Will spray that plastic black. I had great success with my white plastic grip for my rg405m
That grip is originally white plastic
Sprayed inside
Is the fan on the 557 annoyingly loud on high like the 477m?
Might be the same fan? It's loud.
Real Gamers Dont Need Fans. Plug it Off !
So im guessing its smaller on the 477 ?
I can’t really tell from from those pics but appreciate it
Little different then? At any rate, the 557's fan is still quite loud when running at full speed.
What do you use to spray? Never done that but with a bronze ordered I really want it to be black too. Wished at that price they had made the effort to proved two colored cases too. I’m waiting for someone on Etsy to do a slim grip case. Maybe I could use that instate of the silicone.
I have a grip case on my 3DS XL so the extra bulk might not bother me.
I tape all of the outside, so nothing goes on the outside, no paint
Then i use a few thin layers of normal black spray paint, $2
And let it dry
Because it is transparant the black on the “inside” will make it black
Is the plastic cover transparant?
That is the transparant grip from the 405
Looks like it, right? You have to spray all of the inside
Make sure to make THIN layers
From a distance like 30-40 cm
If you put thick spray from 5 cm it will get very thick and hard and then when you put it on and take it off the inside paint will crackle and it will look ugly
It’s seems like CRT beam reduces motion blur more than BFI on this display based on the RGC video. Is it best for 2D games?
Agreed yes. I dont like the dark BFI
Try CRT GEOM and compare it with BEAM
Isn’t CRT GEOM just a shader?
Yes but a very powerful one
But if it can’t be used on 60hz display it would reduce motion blur like the methods requiring 120hz?
New written review
You're an absolute Chad like always Gamma.
You seriously don't get it at all.
Of that’s from Ali then ship within 24h is a lie
it’s been 26h and my order hasn’t been shipped
how long ago was that?
I just send them a message. I ordered right when the sale became available so there should not have been a delay.
What are the chances they shipped but forgot to update?
you ordered at 6pm on a saturday & it's currently 9pm on sunday, just chill, it's not amazon
My ali order shipped
Mine did as well
Thats what i paid
What it currently shows
Amazing Gamecube and PS2 on a brick that you can carry around your pocket. Belt not included.
BUY IT HERE (use code USCD20 to save an extra $20)
https://s.click.aliexpress.com/e/_oo4x1xJ
╔═────────────── ◎ ──────────────═╗
🧙♂️ TECHDWEEB // LVL 99 Ship Flagmaste...
I think they exaggerate deliver date for wiggle room in case of actual delays
What Color Did You Order?
18
27
2
Bronze
Bronze winning hard
I would have got the bronze if it actually looked bronze. Sorry it’s brown.
wtf color do you think bronze is?
this is also bronze, to be fair
Yeah, when it's right out of the smelter. Any exposure to the air starts to turn it dark as it develops a patina.
okay, but I'd probably rather have a handheld that looks like it's right out of the smelter than one that looks like a statue
so I can see where the complaint comes from
There is a bunch of pre rendered shots that look very bronze. But IRL it looks more chocolate.
yeah was copper, bronze shouldn't do that 
ok a statue cooper green handheld would actually be fire
It does too, eventually. It might take longer though since it's a copper alloy.
fair then, wasn't sure 
it's like Retroid's "ice blue" except solid 
we write the year 2055, my rg477m turned green, but it still plays the same games as the newest retro handhelds 
That's the rub, though (literally). If you're constantly touching bronze it won't have a chance to develop the patina. 😏
you forget that this will end up on the shelf after setting it up 
(a more wholesome example)
I wonder if these are real or AI
They’re real
every single time 
just get an RP5 bro
NPCs man I tell you
I wonder if Retroid gets a boost in sales every time someone else does a high end ish Android handheld
great business model if so
I mean, for most people the RP5 makes more sense IMO
rg477m is kinda of a niche-one
and you don't loose too much screen real estate with the RP5 either, as it's still 4.5" at 4:3
still very likely that my 477 sees more use than the RP5 
RP5 is ass
Trying to be good at everything, but only good for gba and psp
I mean, I agree, 16:9 screens ain't exactly ideal for retro handhelds
477m + RDS is the pro move, 16:9 oled when you want it, killer 4:3 when you don't
especially with what I play on them, stuff like the 1:1, 8:7 and 4:3 screens are way more fitting
also 3:2
probably too much off-set on the USB-C port for it tbh
rp4p is the same way, can also byo cable
sure, that's an option
might get a little weighty
but at least it'll be bottom heavy as it should be
free workout lol
do you even handheld bro
I need to stop watching and reading reviews of this thing
That just means you want it
I watch every video that comes out about it.
just buy one and move on 
Oh I do want it
Sure it emulates games and runs window games better than the RG447M 
Snapdragon vs. Mali 🤦
Dude, your image is literally the color of Copper. Not bronze.
Then you get a RP5 
My intention for this thing is everything up to Gamecube/PS2 Thats what this screen is ideal for I'm not trying to emulate Switch or play PC games on it I've got a steam deck for everything modern
The games that might run better are super uncomfortable to play on if you don’t use a grip double the size of the rp5 itself
how do you tell that Snake likes retroid more than anbernic? don't worry, he'll make sure you know
I dont see the appeal of the RP5 at all if you want a switch get a switch if you want a PC handheld you should get that and then get a 4:3 device for retro thats the best combination
Retroid devices are truly jack of all trades master of none
RP2S was peak
would be if not for the display
Aye for its price ( I had pre payed taxes so the price was ass for me)
@topaz ermine already managed to push the performance of this thing to 2.5x the performance of the RP5 (3242 vs 1283) on Wildlife Extreme. This device has a bright future.
yeah... I made that mistake with the RP2S as well... 
being young(er) and stupid 
so you’re telling me you got smarter? 
well, I learned that Retroid doesn't pre-charges taxes over $170 
so I just buy more e-waste now 
i got one of those last month randomly 😄 it is nice
I assume that’s supposed to be the 150€ limit with some weird conversion
probably
Have you seen the Retroid Mini 2?
yeah and I've seen the odd screen ratio and the glossy front, those turn me off
if they fix those aspects in a V3 it'd be a top teir device
It is perfect for nes, snes , pc engine , gb, gbc, neogeo pocket…..
its them Retroid vs Anbernic on who can get the mini v3 or the 407H done right and out to market first
cool but those aren't my priorities
And really just gb, gbc, and neo geo pocket anyway
Well what are your priorities for that type of handheld?
I'm mostly going to do GameCube PS2 DS 3DS GBA N64 GENESIS and maybe PS1
How the hell would anyone not like bronze with a patina? That stuff looks great, gives it a proper textured appearance that actually looks real instead of looking like someone just freshly painted it with metallic paint.
Ok, now you’re cooking up something great.
That would look so freaking cool.
Simple, I like GBA, PSP, and a good number of Wii games that unfortunately only have widescreen as an option. So either just 16:9 or more preferably 3:2 (5:3 being a dream that has unfortunately never became a proper reality for higher end systems, no matter how much I wish it), 4:3 just doesn’t work well enough for me.
Oh that and Winlator.
Fair enough, for those systems. As time passes there will be more people that grew up with Wii or Xbox 360 as their first console
So for them 4:3 just wont make sense, but for now I think its best to have 2 devices for the glory. and to me it makes more sense for the 16:9 device to be a PC handheld but I guess you can stream on Android.
I personally just think it’s great that everyone has options for what they prefer. Even people who prefer 8:7 SNES/NES and GBC/GG/NGP get to have the MiniV2 and the Classic, on top of whatever AYANEO has cooking up with their supposed plans to make something with the Analogue Pocket’s 1600x1440 screen.
they are great , @short quest made great job on them ... shame about the sendabitlity to europe ... as i am totally in need of the low profile ones
I'm kind of a hypocrite because I'm playing Earthbound in 8:7 but the original experience for all NES/SNES is 4:3
I just got some of the low profile ones for the Pocket Ace (as well as my other handhelds with the sticks), hopefully they’re pretty great.
Only for around half of the games, and that’s mainly due to later on stuff. Overall, barely anyone actually tried to adjust the sprites for 4:3 beyond making sure they don’t look outright awful.
Even the games that weren't adjusted, they were all still played in 4:3
It's a niche preference that only exists in retrospect
Yeah, and those same games had what were directly supposed to be circles as ovals and squares as rectangles, with later games and ports actively fixing the issues caused by squishing the games.
It’s pretty much all based on preference either way, some people will want to try to replicate the original experience, and some people will prefer to see the games in proper square pixels without any of the warping.
Earthbound you can easily tell with the checkerboard pattern in the beginning
Kinda just want this for neo geo,
ps1 and arcade
well, Chrono Trigger adjusted to display in 4:3, but that's really one of the very few notable examples of this
otherwise 8:7 looks great on most NES/SNES games
with some games the text may seem a bit stretched tho
but ultimately, depending on what screen you got, you should have no problem adjusting to it IMO
like on a 4:3 display I will obviously play those games in 4:3, but with the 1:1 or 8:7 panels, why shouldn't I do 8:7 (with integerscale + overscale on the 1:1)
Depends on if you want the original console experience or a pixel perfect experience. Either way it's a preference.
But I wouldn't sell the rp mini as being superior to the 477m for that reason.
Especially since you can just play in 8:7 on the 477m and still have a bigger display
all these devices have advantages and disadvantages, it's not like any of them are perfect for everything or everyone
Agreed, my point was that playing NES/SNES in 8:7 isn't really a selling point for rp mini over 477m.
exactly 😄
Rp mini looking cooler, having an oled, and stacked shoulder buttons is 🙂
ultimately i am pretty much satisfied where i am at right now
... with my most played two devices being RPMini and deck
Oh absolutely agree on that. These things are all based around preference and “what you want from it” since the main advantage with the RP Mini would be it being OLED and having less black bars (which also blend in better with its front panel), but in return the 477 has a higher refresh rate for handling stuff like BFI.
.... but i would probably go all in if there was Arc version (sega dpad + 6 face buttons) of 477 😄
and please no more metal 😛
There aren't enough 6 button layout devices and controllers IMO
oh god .... plastic is fine for my dreamed rg477arc
genesis and cd are finally doable on regular arc 😄
i just want my sega endgame ... where i can do DC and Saturn too
No, snes , pc engine and nes mostly play around 8:7
With grey sidebars
Yes please
An arc with a dpad and one analog with 6 face buttons and 2 shoulders 🥰
And 4:3…
No one was playing nes and snes in 8:7 on the original console.
And if you prefer 8:7, that display is still bigger on 477m than rpmini
I hate grey bars. I would rather play them with black bars on a black RP5 so that you dont see the black bars
if I just wanted to play on the biggest display possible, I would play on my TV or at least my Odin 2 Portal 
It's more complicated than most people think...
https://youtu.be/2owtAwcysQI?feature=shared
Dispelling misconceptions and getting into the math involved for several example vintage console and arcade systems. MiSTer calculations also covered!
These videos are made possible by my Patreon Supporters. Thank you so much!
Patreon link: https://www.patreon.com/firebrandx/overview
Home page: http://www.firebrandx.com/index.html
Just play the DS version and slap a crt overlay on it
DS Chrono Trigger low key sucks. I booted it up on my DSi and the font was so hard to read on a small screen. The SNES version actually looks better on a handheld.
bot really, since the rg477m is pocketable, while the rp5 is not
rp5 is better if you don't care about pocket usage though
that's actually interesting and something I will probably apply when using a 16:9 display, but on an 4:3 I don't really want to leave 110 pixels blank 
There are 2 stores , anbernic official and anbernic direct
That direct is a strange one, has less orders
Where did u order?
The Direct One
Maybe Anbernic direct is like some retailer that will ship after they receive them
I was wondering why the sales were so low.
they're both anbernic, sales were low on that listing because the youtubers linked to the other one
a lot of manufacturers and storefronts have multiple aliexpress pages (I believe Powkiddy and Ampown do as well). sometimes one will include shipping in the price and the other will have a lower price with shipping extra. I assume it may also help with appearing in search results. if there is a reasonable amount of sales and positive feedback you should be fine
All my orders for anbernic devices were from Anbernic Official or Ampown
i've ordered from direct in the past & it's been fine
Mines shipped yesterday evening and isn't estimated to be here until the 21'st
we're still within a totally normal shipping time range
And it is Sunday I dont know if that matters in China
does yours show actual movement?
It’s just because others posted theirs have been shipped already. I’m sure it should happen the next 2 days.
As long as you don't order from Shop102930109 you'll get a handheld instead of light bulb
I had cases where tracking shows no movement for days and then it suddenly appeared on my doorsteps lol
I've had that happen with 4px
or crows lol, i've actually had good luck when it comes to unnamed stores but i wouldn't recommend people try it
just this
yah, probably just printed the label, parcelsapp can give you more exact info
Yeah I've never been scammed by one of those shops so far, but I only use them for cheap orders like plastic parts or things like small bags
Bah that one says august 26th to 30th 
The RP5 doesn't have a Custom Made screen either. A 120hz 4.7 inch 4:3 display made from the ground up for Retro Gaming is a pretty impressive feat. Retroid will never claim such a feat.
we will see if the mortgage 4:3 OLED will become reality 
This too.
We'll see because you can't pull it off the shelves because it doesn't exist.
Anbernic is more likely to pull this off before Retroid will.
I’m still impressed by how bright and vivid the display on the 40XXV is so no OLED doesn’t bother me that much.
It still looks far better than my PSP which has visible interlace lines.
And my 3DS XL is unusably dim in bright sunlight, I was kinda shocked when I compared it with my 35xxsp which was still bright and visible
im waiting patiently for a 477H for this screen and a comfortable form factor
7 more months to go
If they don’t deliver until then, I’ll demand a $3 coupon as compensation
Integer scaling without 1440p you can't stretch sans flickering you are right to do so
i am waiting for 477arc 😄
Does integer scaling always use correct aspect ratio?
technically yes
an arc that can run saturn woiuld be neat
I’m curious about playing the Princess Maker games on the Saturn with fan translation😂
Not on 1440
On 1440p you can integer scale the 4:3 stretch
Each pixel is 7:6 real pixels
That's why 1080p is ewaste can't even play snes😂😂😂😂😂😂😂😂
Don't really need Gamma just for that. That's the same fix that the RG557 also got from Anbernic. I'd be shocked if it's NOT in the first OTA for the 477M.
Is the rumble haptic?
I'm playing on a 1440 screen 🙂
Spectacular you can integer scale the stretch to 4:3
Well... despite everything I've said above... Earthbound looks better 8:7
That's what I'm doing
Virtua Fighter 5 for the PS3 runs at 60fps, the fact that PS3 games run at all on such a small device still blows my mind.
Fuck historical accuracy play what looks best
That's how I feel about integer scaling
On the SteamDeck when docked I use integer scaling with a CRT TV overlay but in portable I often turn it off to use the whole screen.
For me it's the H and hopefully V models. Hopefully we'll get the same ergonomics as the RG406V but bigger.
Me too. That is why we are screwed
Ya integer scaling looks the best
I don’t think it is the same thing, I get similar performance on ps3 vs 557, stock firmware
both high cpu of course
The numbers I got for Wild Life Extreme for my RG557 (with Anbernic fix) were almsot exactly the same as Gamma's updated numbers - that's all I'm basing this on.
There is one Official Anbernic that has also low orders? Why? Because they say they will ship after august 13th. That is when the second batch of production is ready I guess, this store is just a backup when all current stock is sold out.
Max says NO!
To be fair, he lies a lot.
First rg ds then rg477h
ill settle for an RG DS
im praying he stops with the clicky trigger buttons though
why does my cheaper powkiddy device have quiet ones
you can probably pad them on the 477m
itd be nice if you dont need to do these sorts of mods in the first place on a 200+ device though 
but its better than not being able to
I mean one person’s favorite feature is another’s least favorite so
Oh, so like the Super SP?
Which shader is this, Nick?
how comes no one ever made a 3d printed plastic shell for the rg405m
Because we suck
We can only play games and complain
like you could imagine just disassembling the thing and replacing the shell
But we can not even make a fucking plastic shell
no but seriously, we have a million 3d printed grips and sticks and shit, but no alternative full shells
But you are right @pine bear , i also have been wondering about the KTR1. It is a great handheld but with bad d pad / buttons. No one bothered to make better ones
I would love some custom flat backplates for stuff like the rg cube and 406h
Also the problem with rg405m is that dpad bottom
And we quickly had RG Arc and RG40xx
With same screen
a better alternative to the ktr1 would be the Ace, if you can stomach the price
$300 plus. Or the Powkiddy RGB50, the vaporware handheld from PK
right
the ktr1 screen was supposed to be in a bunch of handhelds this year but only the Ace panned out for some reason
that being said I would consider the screen on the rg477m superior to that one
That is why I have my hope on Retroid Mortgage Screens. 4,5 inch 4:3 , 5 inch 3:2 all oled and more
Yes, this 4,7 is heaven
yeah in all fairness the KTR1 screen is just a cut down 1080p 16:9 panel 
still nice to have less black bars tho
Gba looks amazing
And NeoGeo too
sure, still it is a 4.5x scale tho
If i have to choose between non-integer scaling or black bars I always choose NIS.
There is nothing i hate more than BIG BLACK BARS
BIG BLACK BARS can make a man go crazy
it still weirds me out to see retro handhelds on normie mainstream websites 😄 this will take some time to get used to
non integer scale is fine, as long as the resolution is high enough you just pop in the pixellate shader, maybe the normal4x filter if you are paranoid, and off you go
Let me tell you guys a cool story. Here in the netherlands 23 years ago, there was a guy who bought a 16:9 wide screen by philips tv. And he was promised full screen tv by the seller. Guess what, they were still sending out 4:3 tv signal , so he got black bars. He went crazy. Bought a gun. Went to Amsterdam. Entered PHILIPS HQ , took a few people hostage, made them write “ PHILIPS MISLEADS” on paper and hold that against the window in the Philips Tower. 6 hours later he found out he was not in the PHILIPS HQ tower but at the neighbours. Went to to the toilet and shot himself. True story.
A crazy world will drive a sane man to do crazy things
This is me, every time I see black bars on my 16:9 handhelds when playing 4:3 content !
😁
I think it’s one of the CRT Royale ones
Thanks, looks lovely!
the meaning of entertainment is to make the middle class less volatile
That was the hostages in that building
Use google translate
Naah, use Anbernic AI ... this is an Anbernic channel after all. 🙃
4:3 1440p
The t820 has the most powerful npu ever
That might actually be nice for menu stuff then and light translations
Would the 4:3 screen be an issue playing Mario Tour and Animal Crossing Pocket Camp since they are usually presented in vertical mode?
should have used shaders
in all seriousness, mental illnesses are actually a lot more common than we think they are
"hit aspect ratio change button" ... there, full screen TV.
that's no good, that would have gotten him arrested by the aspect ratio police
Blocked reported sending people after you
I would kill them myself
Saw a video of stretched out PS3 game on the 477, I rather play zoomed in than with that abomination view
meanwhile, somewhere in NY https://youtu.be/EhTD_gaxBBU?si=ObD5cWh6a5RZSFZv
👉 In this video, we make a return to Nintendo Switch emulation but for the first time we will be exploring the Android 10 build of UZUY with the Retroid Pocket Mini (and Pocket 5) which are both powered by the Qualcomm Snapdragon 865. The emulator is one of many forks of Yuzu and is one of many that I've tested but more importantly has an And...
477m + RDS tho
The only PS3 game I probably put on my 477 is the Street Fighter puzzle one
Does the Mini run Switch games better than 477 because of Snapdragon?
Seeing that it’s weaker than in RP5 I could imagine being even
that should be the case yes, due to GPU drivers
not sure what you mean with weaker than rp5, the chip in the mini is the same, so same drivers, same performance
whatever you can run on the rp5 you can run on the mini
oh so mini has a better one than in the pocket classic
Hoping they make a 407H with the 477m screen and chip I'll buy that too
Or at least a 477V
Mini has 6GB of RAM instead of 8, so some Switch may be worse because of that.
RGC showing the use of BFI to also reduce motion blur in 4:3 videos was interesting.
Old school crt watch like I used to with all my VHS recordings of Sailor Moon
RA has some really good VHS shaders
as soon as I wrote that I knew someone was gonna reply this 😄
it's technically correct, but doesn't make a massive difference in what you can run in practice
I'm going to new York to strangle whoever that is

I wonder if Anbernics quietly working on a screen attachment of there own
you dont have to add that losers logo in your mockups 
Why, at least they’re showing off the gameplay on a handheld that exists for consumers. Unlike the Super SP.
and yes, anbernic DID say something about working on one
Did they say they were also planning on standardizing the location of their USB-C ports so that they wouldn’t have to make something meant to accommodate plugging into either the top or bottom? (Or maybe even side, if they’re feeling particularly cursed)
oh I just screenshotted this
I hope it's not just an attachment
nop
Oh boy, so who’s ready for the repeat of the RG477H to have the usb-c port on the far right side of the bottom (or even on top like the RG Cube)?
You know, so that they can sell you multiple screens for each anbernic handheld (or maybe just multiple clips and cords)?
Raaah super sp!!
Each xx slop gets their own attachments
i expect whatever they make to only support their upper teir stuff tbh
@fierce crypt you have a fan 
Anbernic and their audience isn't the type
I wouldn't buy an expensive handheld for a ds attachment
I would buy an rp5 instead
I guess it’s a good thing I don’t live in NY

Also, fun fact but there are PS3 games that support the 4:3 aspect ratio
Crazy world
I’d just buy a 3DS it’s pocketable. Has two screens. And way better battery life than anything coming out.
Those attachments always look so silly and bulky, on the Steam Deck it’s like a Megazord monstrosity with external battery compartment in the back💀
How many? Is there any unofficial ways (like cheats or patches) to make that work for Armored Core For Answer?
…Also, is there a fix for the bullshit going down with its emulation on ARM currently where this physics error got brought back for the game?
https://forums.rpcs3.net/archive/index.php/thread-194303-1.html
Not even joking when I say it happens both on Rocknix and RPCSX.
I just bought one but i'm gonna decorate it mod it and gift it to my sister
I'm not even surprised by that, the AC games have always had some sort of issue with emulation. RPCSX is just so early in development, so that doesn't surprise me at all. The same goes for aPS3e.
3DS XL is great, especially with CFW, it’s so easy to do now, I played some Virtual Boy games on the 3D screen
The annoying part is that they perform way better and actually work with minimal issues on current x86, so all this arm stuff has done is given me a very painful flashback to what it used to be like.
I still have a working PS3 but don’t wanna put even more time jailbreak Inc that too.
oh I thought you mentioned you were an NYer in one of the podcasts
I originally played AC gen’s 4 and 5 on Xbox 360, so I’ve just been recollecting them for PS3 (and scouting out for a better condition PS3 since my current one is a fucking mess and is at best just useful for dumping games) directly because of the fact that I can’t play online for 360 anymore.
Born and raised, but I haven't lived in NY since I was 18 🫂 Still have family out there
You should move to CT
I remember when the 360 versions were the way to go for emulation.
RPCS3 has really come so far, it's awesome
360 was also the way to go for the games back on the consoles just because of the fact that the PS3 ports for the Armored Core games were…let’s say not great (in no small part thanks to how fucking annoying the PS3 was for development).
No joke, you unironically get way smoother gameplay with less slowdowns emulating the PS3 port on Steam Deck than you do on native PS3 hardware.
Fuck I'm already here and searching
NVM I'll go elsewhere
Where are you
Cell engine is a curse
Messing around with Switch on the 477M (early GammaOS build). Could use more optimization but it's early days.
https://youtu.be/SGr-_UyZdT4?si=FmyNCA5tTBDpeJUZ
Running a custom/early GammaOS build on this. Needs further optimization.
I played RDR1 not too long ago before the rerelease and it was rough determining wether those few pixels in the background are enemies or vegetation😭
Too bad the Motorstorm games I wanna play the most are still hard to emulate on it and you have to compromise settings to make it somewhat playable. Azurath’s Wrath was a slide show too for me.
It will be ok, I'll make sure my next video is all gameplay that's stretched. 
Its been shipped
Rule #1 @waxen ingot
Treat everyone with respect. Absolutely no harassment, witch hunting, sexism, racism, or malicious trolling will be tolerated. It goes without saying that there should be no political discussion, this is a handheld gaming server.

Looks nice in 4:3
Yeasss mine too haha
Looking forward playing WiiU NES Remix on the 477. Perfect on the go game. Maybe the Switch Nintendo World Championship runs well too?
Sell a few and it pays for itself
I wonder if I should get the flat or convex since there’s a $5 difference if I get 2
my rg477m shipped, now let's hope the best for the vat roulette 
Hyped for you man, which colour did you get
Ngl this is a tempting pickup but im being good 😄
Bronze
Good choice better face button colour palette
yeah, I ain't on team skittles, despite being European and that was actually how our SNES controllers looked 
I had one of these silver DualShock controllers as a kid, so I got the silver color so I can swap to black or PS buttons later to make it look like that
Yeah team skittles no thanks
upgrading with PS buttons is always kinda pricey, only did it twice 
I think I still have one silver DS3 controller for the PS3
Still trying to decide about the low-profile sticks
I got mine for £167 - here's to hoping I get lucky in the vat lottery too
nice price
ooh how you manage that?
I used coupon IFPF375F
