#Anbernic RG477M
1 messages · Page 2 of 1
both physically and financially amirite 
The tall sticks on the 406H are one of the highlights

I'm a chef by trade, so I can definitely feel that financially part 
But I can comfortably shove a rgb30 in my pocket with a reversible Grip/Case, but that is just sti k protection
They feel good to use, but not great for going in pockets
Ig I can always get a clipshield though
That never really was a issue since I don’t pocket it

I feel lucky to not care about pocketability. It seems to ruin devices for a lot of people.
I have a retroid 4 pro, but that long candy bar would stick out my pocket and the sticks got caught on everything. Even with a grip/case
I don't even want a micro handheld in my pocket - I like to keep them in a case and look after them, even if they're cheap
If I want a more pocketable device then I get something smaller with no sticks
we need a more powerful Miyoo Flip someday...
Are people saying grilling time & retro gaming time don't go hand & hand!?!?!
Step 1 for Miyoo.....fix that Hinge 
Step 2, give us the 321 with that Brick Screen
its a wonderful thing isn't it 😄
Wake me up when they make an arc pro with this screen and d8300
Oh man.. just saw the promo... another metal Anbernic... 477 denotes what .. a 4.7 inch screen?. That is huge and probably will look good in whatever aspect that is.. interested
not a giant fan of that bronze color though
Anything above $250 is a pass, I think they're going to do something dumb like charge 270 for it though
being metal it will have some premium for sure
Too close to Odin 2 mini
I bought two RG350M over the years.. a 351MP.. but never the later.
I really liked them but did end up giving them all away to friends lol
477$ australian
I'm hopeful they keep it under 200.
even if that means it suffering from lesser hardware. That screen size alone I could be happy with another RK3326
lol
Under 200-210? I'm sold.
Over 210. Nope
i expect slighly above 300 if its 8300 ... just thx to the metal
99% chance it's a d8300 and around $250
that would put me at a strong maybe
250 is considerable
and at that point I would just save for the odin 3
i would consider 250-300 if it had sega dpad and 6 face buttons 
yeah hopefully it's sold for below 200
Sega d pad!!!!! hiss
but not sure who should i harrass to get my "ultimate sega handheld"
The #1 reason I still buy Anbernic products is because that sexy perfect membrane classic Dpad.
40xxV is sooo nice
i basically completely consolidated my verticals into just rg406v and 🧱 (as the ones i actually actively play on)
with 35xxSp for fun factor rare use and "Funkey S " as collectors item
Yeah I'm down to just my 280v, 40xxV, and my Odin 2...
not considering any actual hardware like my 3ds
I need to get back with the program
I keep giving away handhelds lol
i sill have the 280v as it was like my entry into the emulhandheld spere
and have been deciding to get rid of it for months but its one thats going away most likely
just havent listed it for sale yet
rg405v, v10, rgb20sx and 35xx ... already went away (some sold , some gifted away)
I picked mine up second hand from someone on this forum. I love it. I tent to take it when I don't want to deal with something in a case.. it's my "waiting in the car" handheld lol.
I get ya though.. it's getting dated.. I would not want another OpenDingus device ever lol
although Adam image really helped
i use brick for that now ... 280v just had really weirdass screen
I had two 350M too
but i guess the sentimental value is whats stopping me to list it for sale 😄
I get that way too lol
similar case is OGA .... ue to the "build your own" side of it ... and me heavily customizing it
as Nintendo's people would say
Sasaki admitted that it was partially due to some "very fussy developers" preferring digital shoulder buttons, while Kawamoto said that his team decided that the instant input of digital triggers was a better fit for the Switch 2 over the brief lag that comes with analog ones.
is that bronze or black being lit weird? Really hope it is black. This seems like everything i ever wanted, but in execution, it really is likely the size of my metal rp3+, which is a beauty, but not really going in my pocket. I literally just want an updated 405m, better screen, better guts.
that aside, I will be buying this, but right now my flip 2 goes in my pocket (slightly uncomfortably) and is just so near endgame and cool, that it will be hard to see this replacing it
Will this be a budget device or another android
can someome summarize/ link me what's "special" about this upcoming console?
Metal + 120hz refresh rate
big 4:3 screen
okay, this I like
Same as RG Slide
the screen will be the same as the one in Slide?
rg 4.7
Yup
only thing I don't like as of now are those tall sticks and the overall design looks pretty dull...
It feels generic and uninspired for sure, but sometimes what works just works. If it stays around 250 I’ll do it
ugh... I hope it's cheaper but metal alone raises the price, I guess
Not feeling the inline triggers fir a high end device
250 is reasonable considering the D8300 is near 8G2 level
I mean sure, no adreno optimizations, but for PS2 and all
can’t go wrong
I'm not knowledegbale about those letters and numbers... 😛
Whoops, sorry about that.
8G2 - AYN Odin 2
D8300 - RG557
My question is, are those joysticks removable and does it have RGB?
Seems like a better RG cube, the screen is just as tall + it’ll be way more powerful.
would prefer it in a similar form factor to that...
now if only this wouldn't be 350€ and ditch the oreo skittles....
There will definitely be be custom buttons. Unmarked black in the silver will look so clean
It has RG Slide screen ? & 557 specs ?
Correct
why not analog trigger
That and swap left stick and dpad would be my only two changes
we complained a lot about the stick position on the 405m
actually stick on top would be absolutely atrocious for this device
main reason why i didnt like the 405m
i never understood the mentality of stick on top on devices like this
if the caps are removable i'm out, lost caps on my RP mini and rp5 almost immediately pulling it out of my pocket and bag
Pretty sure they're the same sticks as the 406h/v, the ones that pop off super easily
better those than the rg557 ones 
Think I would've preferred those on this one actually
they are fucking tiny on the Slide already, the sticks are fine, but the caps would be a huge nope on this tbh
It didnt really make sense for that handheld cuz it is so weak
true true, well it's okay for N64/DC, but yeah it ain't really does many stick centric systems
honestly I don't mind tho, flat slab devices make it relatively easy to slide your hand down for the 2ndary inputs
and also this is as tall as an rgb30, so it should be totally fine
This will be alot like the pocket ace with a different aspect ratio
ACE my beloved, not that I will ever play anything but GBA on that 
And its crazy cuz of how well the ace can play modern consoles
Give us sliders you cowards
Rp flip 1 or 2?
What
Which do u prefer?
Neither?
I refuse to use my premium GBA for anything else 
I'd rather cut my balls off than buy another retroid product
Looking forward to trying gba on the flip 1s ds
dead on arrival if this is a T820
8 elite or bust honestly
domestic pricing is always less than what we have to suffer
Did not expect a Brandon meme but here we are lol
Scrolling through this chat log is something....
No don't worry everyone needs to see some Pikachu bakery twerking and getting milked on
Looks like this will be $280 retail then if I'm reading it right
Yeah I'm guessing very close to 557
235-263 for early bird
People might wanna wait for this to drop in price or be discounted further
Kinda bummed they went with the D8300 for this one. The chipset has great performance, but Anbernic's Android build for the D8300 is buggy and crashy as all heck. It was the main reason I returned my RG557 for a refund. It's weird how their T820 Android build was so stable and nice but they completely screwed the pooch on their D8300 build. 😵💫
The trick is that the T820 build was also shit in the beginning. They just got to iterate and update the firmware while working on new devices for the T820 since they made 5 different consoles with it. (So same story as StockOS for the H700 handhelds).
So fingers crossed that their D8300 build gets more stable over time? 🤞
Maybe? Depends on how many of them they do.
This is luxurious handheld for me.
Fun fact, the 4.7 screen on it’s side is taller AND longer than the cube’s screen
You can get pretty sweet DS/3DS results
Maybe
But hey everyone
Missed you guys 🥹
Anyway I hope for anbernic sake this one is not a big mess for them
such a dumb move to attempt pocketability with inline shoulder buttons and flat back and then completely drop the ball with those awful tall sticks.
like cmon Anbernic, just put the 353M sticks in there to make it flush with the dpad and face buttons. but nooo gotta have muh gamer RGB sticks
Anbernic making Good decisions on their devices = impossible level
It neither makes the pocketability fans happy or the analog trigger fans happy, I don't get them at all 
yeah the sticks certainly ain't it 
them being pretty flush was the nice thing about the 405m
Yeah it looks so pocket friendly
this is Ayneo level of sticking out 
It's anbernic in the end, this is only the 2nd device using the d8300 i believe? They must have 10 more designs left for the year
Yeah
Maybe they'll make an rg407h
Next up clamshell d8300 device
Nope I don't think so
Maybe rg407v
My money is clamshell device and Vertical device of d8300 devices
pretty sure they rather will use their 4.7" screen for upcoming stuff
I can see them doing a dual screen clamshell next year, with retroid doing that accessory and the emulator updates, it's looking very likely now
And unlike miyoo they know how to make a decent hinge 
Yeppp
Idk maybe rgcube v2
this screen ain't cubing man 
The cube was a 1:1 screen though
Unless they get another custom 1:1 screen, which would be pretty niche
rg477v/h could be in the cards, but honestly I wouldn't care too much about those
there is a 5" 1440x1440 screen tho
5" vertical handheld would be insane
probably not pocketable though
I don't see the h coming out but might im wrong
Deffo V i would see that
Yeah, this is basically the horizontal, maybe they'll make a plastic version
Oh man, I love it, this would be a beast
$280
Anbernice had two expensive handhelds before
The RG552
And the Win600
I hate metal this size, it will be waaaaaaaayyyyy to heavy
I am gonna buy one and throw away the metal
And rg557
Print a plastic shell
Early bird discount seems bigger than usual
Three expensive handhelds rg557 rg552 and win600
Definition of shit experience maybe rg552 i can allow
I own the 552 and it a great handheld. It even was Russ’ his fave handheld for arcade games for a while
still too expensive and battery life sucks ass
Battery life is bad yes, but for home playing it still is great. Especially arcade games, megadrive, neogeo
Beautiful screen
Its already 3 years old
its far too heavy to taken places imo
Yes, it is a home system
thankfully there are other 5.5" 1080p handhelds nowadays 😆
none of them
have a better screen
than 552
imo
screw oled
gotta compromise somewhere
no
just own everything 
552 screen isn't available anymore
and this is why i keep crying about it
just build it yourself from an rg552 and RP5 
and then become Bankrupt coz i cant mass produce it for profit?
nah im good thanks
i will live with RG477
who said you should mass produce it?
just Frankenstein your own device out of these two 
so
how expensive is this device gonna be
477m
we know the 557 is like 250
this is metal
so...........275-300? + 20ish shipping
$300 at least
$230 for base 007 line device
+$20 for the custom screen
+$50 for the metal shell
+shipping and tax

if i wasnt after a 4:3 device
and then the screen falls out
i would not even consider this
you could still SLIDE away at half the price
but I will argue that the damn thing ain't comfortable 
getting carpal tunnel is part of the fun of this hobby
as well as modding
and installing new os
but not actually playing any games
I'll settle for the ktr1 screen, but all devices with that thing seem to have been paused
except for the ace which costs 5 billion
I love metal shells, but it seems like an aluminium body and high powered SoC are a bad combo
Or really any SoC that needs more active cooling
Metal case acts like a heatsink, transferring heat elsewhere. So actually better for fast CPU. case does feel warm, however.
i find it funny that this thing will be close to the height of the rgb30 due to the screen actually being taller than that one
Wouldn't the elsewhere simply be your hands? Feels like it could get uncomfortable if you play something really intensive
It won't burn you, but I don't like it when I can feel the warmth in my hands
honestly you don't even need to put it on its side since it's 4:3. The top 3DS screen is 400x240 so you can just 3x that (1200x720) and still have enough vertical space for a 1x bottom screen (320x240)
the bottom screen would be small but visible enough for what you'd need it for
and then regular DS you can just do 3x top screen 2x bottom or if you really wanna min max 4x top 1x bottom 😂
Yeah it’s actually pretty great either way.
would take this if its more stable than d8300
Conflicted on this being inline shoulder buttons, instead of analogue triggers. Will PS2/GC/DC racing games suck without analogue triggers?
Ps2 didnt have analog triggers
A majority of GameCube ones didn't use them either
Racing games might be the biggest issue
Don't understand the issues with the shoulder buttons. It's easily do-able for any game in any setting. Unless of course you got small hands.
Welcome back!
how does this compare to the Retroid Pocket Flip? because even the discounted price on the cheapest option is slightly more expensive than that
Omg i have been wqiting for this to release and now it is there, again anbernic style, trying to make everybody happy, so we got heavy metal case for it to be rugged(but not very pocietfriendly), inline shoulder buttons and flat for it to be pocketable(but not ergonomic at all), big joystick to be accurate(but not pocketable at all). I wonder of this company will ever build devices that have a concept for it to follow or if they will forever just randomly put some parts together and hope it will be a good match. And the best part is it seems it will be 60-70$ more expensive than flip2 (which is quite good in all of these categories). I dont get this man, i do not get this.
It's not 
its anbernic, they do things that don't make sense 😄
How much smaller is the Flip 2's screen for 4:3 games?
This is Maxzhou's hilarious reply to a guy who was trying to teach him how to make a handheld. You could translate it using ai.
I'm rolling at the 大氣層 comment lmao
I vote to make this the new Anbernic meme
hell the entire post makes a great copypasta
I don't speak Chinese 
I like this part the most : *5. Do you understand electrodynamics? Do you understand quantum mechanics? Do you understand mathematics? Do you understand philosophy? You know nothing, you are a mentally censored * person, and you dare to question me?
I had to censor the R word, otherwise Discord wouldn't allow me to post it xD
It's super funny that Max thinks that knowledge of quantum mechanics and philosophy is an advantage when ones design a handheld
Okay I need to know what they could've said to make him this mad
😄
@carmine plover look what I've found lol
He seems to lose some screws with any handheld he makes 
I don't know why I kinda imagine furious Tommy Wiseau from The Room when reading this xD
Spamton G. Spamton speech bubble
Tbf hes not the only one at anbernic
That being said the 406h should have been 406m, and this should have been the 477h with ergo grips and analog triggers
They might still do that but I dont have hope
Good bad moive.
Egh that's never bothered me
I’m actually pretty on board with this device
Metal just means the shell is more sturdy
I am very very happy about inline shoulders plus lcd
This is pretty much everything I’ve wanted
Won't this thing also have the same chipset that the flip 2 just released a few days ago??
the sticks not being flush-ish is the real nitpick I have with this
well and the price probably being $299
The what
nah Flip 2 D1100 is the RP4pro SoC
D8300 is way more powerful 
How long till we see stickless mods
That brass color one looks mighty fine if I’m honest
like waaay more powerful 
Honestly glad they went d8300 with the 960p screen
I wanna push my GC Wii and PS2 to the max
Yeah
this honestly ain't too far behind the SD8gen2 in terms of raw power, easily handles 4x upscale on most GCN/PS2 games... the issue are the drivers and Anbernics shit Android build
Yeah only issue is gpu drivers
This thing cooks the flip completely
in raw power yeah, end results may be in favor of the Flip 2 due to driver compatibility heavily favoring Snapdragon... well the D1100 Flip2 is cooked indeed
but given how this has a 4:3 screen, it's kinda fine tbh, not gonna play WiiU/Switch on this anyway
and performance up to GCN/PS2 is perfectly fine
Shaders gonna be tasty on this screen
Don't really fuck with drivers unless it's switch in which i kinda hate
the bigger issue I have is honestly with it's price... like if Anbernic wouldn't be greedy fucks this should be $239 at most
Oh yeah 120hz too right
Yup should be.. im guessing if this thing has the slide screen
yep, same screen
If it’s below 275 I’d be shocked tbh
Maybe at bulk they can get the metal shells cheaper, but it’s always pricey
I would be shocked if it's less than $299
but they massively overprice the used SoC
like I can get a phone with same SoC, RAM/ROM for 200 taxed and shipped
meanwhile they made the rg557 $250
yeah it's $277 domestically
always more expensive when they sell it outside of China tho
At that point, save some extra money & get the AYN Portal
and quite frankly, they apparently can afford to sell it at $235
Metal Tax + D8300 Tax
so I may be willing to go as far as $249 for international pricing, but everything over it should be shunned and sat on until they drop the price
you forgot the custom screen tax
It's not custom screen anymore, now it's part of 2 devices 
close to 300 dollars?
that's like the same price as a refurbished steamdeck
Not really crazy about that
The thing about Anbernic prices is they always eventually drop with sales. Unlike AYN or Retroid which maintain pricing.
Yeah launch price is basically an early adopters fee
But still, quite pricey
Once it gets to Ali sales it will probably be more worth a look imo
It seems like there's going to be a pretty big early bird discount at least, msrp is too close to the odin 2 mini though imo
This will probably go for 200ish on Ali Sales. Like the RG557.
Be patient and you will be rewarded
Ehhh, I’d guess Ali coupons would get it down to 240 or so. Probably better after a year but by then there will be something new
557 had a lower starting point
maybe if in a few years we wont have any better options in the pocketable category I can see myself getting it for like 210 dollars
Still can’t believe no one has done a flat back for the RP Mini v2. I think that would probably be my end game if it would be thin enough to be pocketable
would probably be pointless given the triggers
sent this in the official Anbernic QQ chat and people there said that this is fake
do you think it'd be worth buying at 235? or should I go for something from AYN or Retroid at that price point?
That is funny, someone said that was where they ripped it from originally just translated it to English
yeah I sent the Chinese version lol
The pricing really doesn't seem far off. D8300 + metal shell costs
I mean, it will be a nice device for anything up to GCN/PS2, albeit having only digital triggers will be limiting for some titles, but both the Retroid and Ayn devices will do better beyond that
$250 got us the 557. So why would this be cheaper or even the same price?
$235 is the Chinese early bird price, $275 the regular one
but given how domestic prices are always lower, I still bet on $299 with $10 off for the first 3 days
yeah I just wanted to know the value for money here if it goes for 235, I'm tempted to buy a Retroid device but don't really want an OLED screen
fair I guess, but at the higher end d-pad on top is rather rare
well the Pocket ACE has it, so that may be an expensive option 
when are we getting the mortgage screen?
gosh I love my ACE, nicest GBA 
@eager pelican I have been really considering an ace, is it pocketable at all?
steamdeck though
oh yeah it looks fantastic for GBA lmao
I mean... the sticks ain't really inset, but aside from that it's a pretty flat slab, not that the 447m will be any better in that regard
Talk me out of buying it. Or talk me into it. Is it as awesome as it looks??
I mean the Ayn Odin 2 Mini is probably the more reasonably priced option for 90% of the people looking for a handheld that size and with that kinda power... but I really like it, so if you are more into the IPS panel instead of the Mini LED or want to pay to have a d-pad on top there ain't really anything like it... let alone that it's a 3:2 panel 
4:3 and it has a better refresh rate AND IS METAL
just use a grip
the "has to fit pocket" obsession strikes again
I think this device is too large already to make all these ergonomic tradeoffs
doesnt need to be pocketable, the slimness is just kinda cool
if it goes into a backpack I think better ergo is preferred but what do I know
I guess for a pocketable vertical the 405M was pretty good
those rounded edges look pretty sweet
maybe they make a plastic version of it with more ergonomic shape and sticks like the 406H
would be a 477H I guess
If the 407v ends up being a thing, can they NOT use the 4 inch screen
Give me the 477v
I want a MASSIVE VERTICAL
come on man, they can do it
that said if they made a 477H in more ergonomic I would still wish it used a snapdragon chip with linux support for rocknix
I really don’t care for linux, but winlator and better switch would be nice
but with everything up to ps2 working wonderfully on the 8300, id say that its nowhere near a bad chip
personally I dislike android but I know a lot of people do not mind
As long as it doesn’t have the same diamond cutter nipples that the 406V had
Honestly it's the 3:2 that's intriguing me the most. GBA looks incredible on it, and 3:2 is a nice middle ground for scaling other things as well. Expensive GBA though 
Bro that's what the 40 is 407 means 
worth it tho 
Well I mean if you're gonna sacrifice ergonomics then yeah
well, nitpicking a lil is that GBA actually is a 4.5x scale on this screen, would have preferred it to be 5x 
Yeah it's definitely an odd choice that they picked a perfect aspect ratio for GBA but not a perfect resolution for integer scaling
they just use the screens that are available and honestly Ayaneo is the last company for which a custom screen would pay off 😅
way to small amounts of handhelds they sell
which is why I said I wanted a 477v right afterwards 
Damn, just now noticed it, but it’s the next ##7 device after the 557 and they already lowered the Internal storage from 256GB back to 128GB.
True, I feel like most of their products sell less than 200 units if the indiegogo numbers are anything to go by
well, I don't think their domestic customers are included in the IGG campaigns
but yeah most devices probably do only like 1000 unit runs or something
Like, I’m not the only one who noticed this part right? They’re still keeping the 12GB RAM but decreasing the Internal Storage?
stinky
this was absolutely hilarious
can we be the anti android club
Better than 8 + 256
imo
I’d unironically rather have the 256 storage than the 12 ram.
Literal only game I’d ever personally want to play on Android that at least seemed to need 12GB on board RAM was FFIX with Moguri, everything else is just fine with 8GB, and while I don’t play much native Android games, I do very much so enjoy stuff like texture packs for GC/PS2/Wii/3DS/etc, and those build up with time when I add in the native Android ports I do like playing.
…That and switch updates/dlc, but those only take up like 15GB-25GB depending on what switch games I’m trying to emulate currently (since I already usually prefer just playing on modded Switch Lite, but I’m not taking that with me everywhere).
Oh, and just to be clear, I’m not really trying to say “you’re wrong to prefer more ram” or anything dumb like that, I’m mostly just explaining fully my own reasoning for preferring more Internal Storage to Ram (although I definitely wouldn’t turn down both). Obviously anyone who’s using stuff that is Ram intensive will likely need more ram.
Like, genuinely not joking when I say I went into “over explaining my reasoning” mode.
the pic of the price is fake ,not official
@loud shuttle
I don’t really find a problem with all you’ve said, even before you clarified (thanks for doing so anyways, you’re kind). More storage is nice in any case, especially with texture replacements and whatnot, even if the only game I care to have upscaled textures within doesn’t load them in Aether, very very annoying and frustrating.
I like more ram because the idea of it feels nice, I could go on about longevity but I don’t really think that matters, since my 405v is pretty much eternal with GammaOS lite and that has 4GB. Either way, I’d be fine with both configurations, having less ram doesn’t really ruin the D8300 experience, same with storage since 128 is more than enough for me. But yeah, 12 ram on this thing sounds kinda sweet because of some overall android performance stuff, even if it’s slight in a fair amount of circumstances.
sorry if this is long, that last part you put was pretty respectable sooo i just felt like it
14mm is insane
Is Anbernic selling their own case..? SO COOL
eh, not really, 505 is 18.5mm, rgb30 is 18mm, 351m is 18mm, rp3+ is 15mm.. kinda doubt it's only 14mm tbh, but i'm here for it if it's thick (edit: thought you meant it was insanely thick lol). 355g is like 3/4 lb tho, absolute weapon
14mm at its thinnest point would be really solid for a machine this powerful, but this doesn't have huge protruding grips or shoulder buttons.
yah thinner than an rp3+ would be nuts, wish we'd get some pictures with it next to something for scale
wait even thinner than rp3+? damn that was painfull to hold
yah i'm really hoping it's thicker, it definitely looks thicker from what i've seen so far
phone corpos are even worse at this
they want the phones/tablets to be so thin it cuts into your hands for some strange masochistic reasons
Looks cool, but 300 buckaroos and mediatek drivers? Man
What's the screen resolution?
1280x960 (for real this time
), same screen in the slide
Max Zhou revealed more information about the 477M: There is no 477H. The 447M is made specifically targeting the KTR1S, because KTR1S is also a metal-bodied handheld with a 7300 chip, selling for 1799 yuan
I guess Max Zhou also has some beef with KT Pocket, just like when he released the RG Cube to destroy the ZPG A1 Unicorn 
so basically revenge hanheld
why does Max Zhou have beef with everyone
and not really general public requested one 😄
thats heavy
uhh.. well
I guess it's not that much heavier than a 3ds xl
should be fine
So basically about two phones
That seems crazy lol, I don't think most people even knew about the ktr1s let alone were going to buy it
if it helps him push out bangers i'm all for it 
Oh alright, I guess we now have confirmation that the KTR1S is coming
Omg....its lighter than the RG Slide 
Yes, but this is a FULL metal Casing 
"slide teardown finds the insides are made entirely of tungsten, ketamine & war stories" 
should've been 18mm thick so those sticks wouldn't protrude
& bigger battery, 557 wasn't amazing & the battery in this will no doubt be smaller
That would make sense as to why the dpad is on top i guess? Usually they do analog on top for anything over a certain price
This the first device i plan on getting a clip shield for to make it pocketable
think there have been complaints locally over analog on top for everything that's mid-tier or higher
especially for models that have screens which are perfect for dpad-heavy games
Yea im ok either way though I do feel like I prefer analog on top because using both sticks sucks when they're both on the bottom
But there's only a small amount of games where you use both sticks regularly tbf
I agree
All in, but I really wish that bronze was black, or the silver had black buttons, both are unappealing to me, but not so much that I won’t get it.
Black 405m with better button mod is still cooler than this, but I could use a bigger better screen for my dumb old eyes
If it's playing WuWu then it's a D8300 almost guaranteed
The 7 at the end of the name guarantees it
Sure if you lf ypu knew how the naming scheme worked

Yeah safe
He want to be the top
280 is a hard pill. I know metal. Just wish anbernic would move to SDs. Oh well.
Are will still debating if the RG XX7 device is d8300 or not lol
28xxVM
that would be fun
He has beef with everyone but Retroid and Ayn for whatever reason.
Who knows, maybe Anbernic is working with Retroid and Ayn and that’s why they conveniently don’t beef with each other on an actual marketing standpoint (or at least Max)? Budget, Midrange, and high end all covered by one each, where they only dabble in other ends every once in a while?
Yeah it's kind of funny how he seems to only punch down, like the ZPG unicorn, the miyoo flip, and now the new KTR1.
I mean I’d punch the KTR1 too, regardless of whether they were above or below me.
Hell, if they’re below, then I can kick them while they’re down which is even better.
Theres a case on this no like a tpu edge guard
So this is 14mm at its thinnest point, was the rp3 24mm at its thickest or is that not including the sticks or triggers
I can't seem to find much online on that
having a hard time believing the 477m is that thin tbh
Yea ain't no way lmao
Or they're doing the battery right up against the cpu again. And it would have to be a thin battery too
stacked will always be better than inline, but honestly? these seem well designed
No
It’s got diamond cutter nipples like 406V
I dont think it will be a big deal on a device this thin imo. The bumps made it worse on the 406h
This being $250+ will push me to finally getting a 406h
For that price I'm gonna wait for reviews and it'll have to be near perfect.
My Odin 2 will live forever
I hope lol
What was the 405m at launch?
150-160ish?
depends on your skill issue. In line is fine same with stacked
Kingdom hearts doesn’t utilize L2 and R2 at all
I’m pretty good when it comes to that
Sexy, long live the skittles
its a really solid little machine the 406h 🙂
that shell looks pretty
I still dont uderstand why did they use a chip capable of playing up to switch in a 4:3 handheld…
Otherwise the desing looks good, such a big 4:3 screen is amazing, but asking 300$ for a ps2 handheld with terrible ergonomy (will be able to play what, like 20minutes until i get cramps?) seems too pricey, but maybe thats just me. Seems ill continue playing ps2 games on my sd and low end 4:3 system on my myioo mini and keep drraming about reasonable ps2 and below handheld. Or maybe ill finally get the 406h 😄
I offer $100 for a black plastic copy of this
start and select bottom, just how we like it
Retroid/AYN had to learn the hard way the proper place to put start/select in but Anbernic is like "nope, don't care, not my problem"
The rg405m is 413 gram 😳😳😳
has it the rg556 chip or rg557 chip?
557 chip unless they decided the 7 means something else now
thank you
it rly reminds me the rg405m which was my 1st anbernic handheld and I miss it.
I still have mine, but I'm not a fan tbh 😛 it's too heavy and gets super warm because of aluminium shell
I would prefer plastic version of 477 as well
but TBH I think the sticks are not protruding that much as I was thinking :
Its just a shame they wont do a plastic version
They might have a 477h just be patient
and I me thinking they were working on a DS like handheld.
gimme 447arc
They probably are
They can do multiple devices at once in their pipeline I’m sure. This one is further along as it’s been announced, others are probably in various design phases. It’s not like it’s just 2 dudes wearing all the hats at this point haha
Funnily enough, of course it would be even bigger than this, but probably lighter
I dontbcare for bigger... I just want my ultimate sega handheld ... arc was almost there but not strong enough
i'm in on this, looks great, WISH it was black, that's gonna really bug me, I find both of these options pretty gross. 405m is near perfect, just would like a better screen. give me all back! but yeah if this fits in my pocket better than the flip 2 i'll be super pumped. I have to admit though, even in the US, now i'm nervous about ordering anbernic after that Italy YTer thing. I wish they sold without the SD card
They do sell without the sd card
Please make the start/select buttons quieter than the 405m
People on reddit have been exhausting about this. At least you asked it as a sincere question.
Basically when you start adding shaders, filters, and BFI on top of each-other that adds up to a lot more processing power than you might think so there is absolutely a legitimate use case for a system aimed primarily at the 8-16bit era having more power than strictly necessary to run them. A premium device aimed at that market isn't that crazy given some of the other stuff we've seen.
Reddit has always been pretty shitty but it’s only gotten worse lately , used to visit SBC sub all the time now it’s just filled with “ what handheld should I buy” or get dog piled for having a different opinion besides the usual hive mind mentality.
I appreciate having a chip capable of doing everything up to Wii at 960p equivalent resolution scale no problem
Its just a bunch of posts telling people to get rp5s. And how oled is the greatest thing ever
I agree, its nice for 3d games but I really don't like the way it makes retro games and shaders look
Plus there’s stuff like burn in and PWM flicker most people conveniently omit
What I've learnt is that good ips can be close enough to ips
Yeah there are damn good IPS out there
my y700 looks amazing
It's the same screen on the Legion Go and almost OLED like but without the drawback
If you are a vampire and usually have a very dark environment around you, OLED vs LCD is a much more obvious difference. If you're paying outside yeah it isn't that different
the endgame to end all games
anyone have a guess on price? the 557 is crazy expensive
i was gonna get an RP Mini to replace my 405M... but might as well wait for this
wouldn't this chip be overkill for the games/systems we would play at 4:3 anyway?
They do it on purpose, they got feedback that everyone liked both rg405m colours, so they went: “ we must not bring out those 2 colors, then it will be the perfect handheld and they will stop buying new stuff, lets give them these 2 shit colors, poop brown and piss white”
this is gonna be like the most powerful dpad on top handheld released aside from like the steamdeck
Rp mini -> rg477m -> pocket ace
i wish they went with a less powerful chip for the 477. it's not likeo switch emulation will be enjoyable
or be good for streaming
You forgot about the Pocket Ace.
Don’t blame you for forgetting it, but this thing is still definitely gonna be less powerful than it.
oh yeah
haha, yeah very forgettable device
I guess the ayaneo pocket dmg also counts
I’d say it doesn’t since D-Pad on top is the default for Vertical handhelds so there’s nothing for it to compete against, but there have been some very cursed creations that almost felt intended to spite that.
just you guys wait for the to release of the true peak aka TJD T80
Doesnt meet criteria
specs?
you havent seen the ultimate brilliance and full glory of the peak ?
Is this satire?
I’d prefer having enough power to max out the screen resolution with every system that supports 4:3
Unfortunately no
even at like 3x 4x upscaling, isn't this chip overkill?
T820 can’t do 2X on a fair number of GC and PS2 games
ah ok. then I'm mistaken. sry been out of the game for a while
T820 can struggle a lot for problematic ps2 titles
i "just bought a steam deck" and stopped looking at retro. handhelds for like 2 years lmao
unleass you heavily tweak
but now i'm itching to get back into the hobby
I absolutely hate tweaking settings. Huge part of why I dont fuck with ps2 emulation even on my s23 ultra.
Its worth the powerful chip for me just to not have to fuck with any of that
tbh there are games
where we are ultimately constrained by software rather than the HW
and will be iffy even on sd8g3
tbf powerful enough hardware can bruteforce its way through those issues, it's just that it'd cost a fuckton of money lol
yes
but its still bruteforce and not perfect
at least from my experience with stuff like ... Rogue Leader or Dirge of Cerberus on sd8g2
U can brute force your way on dolphin pretty easily at least for the games on the gamecube library.
Im pretty sure ps2 is more difficult due to the level of complexity to emulate the hardware.
Its not necessarily more powerful though. Gamecube takes the cake which i find interesting.
I couldn't talk myself out of it. Ended up ordering the 12GB pocket ace after watching a bunch of reviews on it. Tech Dweeb's review pushed me over the edge
Same, contemplated between so many devices, still can't get over the 3:2 4.5" screen with a powerful chip, even though it's kinda overpriced 
That was my main draw too. Plus it looks sooo good
I wish it was OLED, but it is still a nice looking ips
For strictly gba or what else??
Pocket ace not being perfect integer scale for gba absolutely killed it for me
Oh damn..
That shit should have it at that price..
I think i may just the powkiddy v90s that just came out for a little 3:2 device. Seems perfect at like 30 something change if youre not sure you can get into gba. I had gba sp when I was kid but hmm...
Wait a minute.. the v90s is 4:3???

No, I got it as an everything handheld, I just really like that 3:2 is a nice middle ratio between 16:9 and 4:3, so no matter what I play the letterboxing is minimal. I've been wanting a powerful non-pc handheld for quite a while now, so I finally made this my pick
The Powkiddy v10 is a fun looking little 3:2 device for $40ish dollars. I still want one, but I'm trying not to hoard handhelds, and I already have too many.
405m literally had ONE OF THESE COLORS
and imo, that looked great
Yup
Does anyone know if you can paint metal (or course you can) but without “feeling” the paint?
If i buy this , which paint will i have to use?
cc @devout estuary
What is that process called again, where you put in in a pan with paint and cook it
Guys , the 477 metal has exactly the same weight as the RG552p
4.7 metal versus 5.5 plastic
Yeah anodizing I think
Depends on the metal tho
Whatever it's called it's just using magnets or some other plasma magic to fuse a different colored metal to the surface
I wonder if anodizing would work since it's already anodized?
Google to the rescue. To re-anodize you will have to either sandblast or chemically strip the existing anodized coating, so quite a large amount of work, but certainly doable for the industrious individual
Honestly that's sounding like kind of a fun way to spice up my 405m, but I don't know if I'm fully committed to tearing my screen out and trying to re-adhere it after 😭
there is no 552m tho 
Yes, 552p I mean
and that handheld wasn't exactly considered lightweight... I can't imagine having that weight in a more compact form factor
the density of the sun, in the palm of your hand
3ds xl is like 320 grams though
and it's basically the same size as this
and it doesn't really feel that heavy to be honest
I wish i had the balls and skill for this
motocycle paint, a bit expensive though as you need to apply multiple layers
I think I will buy it without SD Card
Well, the small rg405m is 413 grams ….. so it is 15% lighter
The rg351mp is 267 grams so it is in between the 351 and 405
I wish they’d make these handhelds out of tougher metals
Like stainless steel
Or tungsten
wow, the s23 ultra has a 4.8 inch screen when it comes to 4:3
making it bigger than the rg477m
I was already interested in it due to me still having the siren call of a “Odin 2 level handheld that’s around the same size as an RP5 and with no MiniLED” in my head after I had to give up on the O2 Mini due to its screen (despite genuinely loving literally everything else about it, I cannot understate how much I hate the fact that the screen alone legit just ruined it for me).
So I ended up getting the 12GB version for the 256GB Internal Storage, and honestly I’m legit really liking the Ace.
wait what
okay mad respect if true
I would have expected it to be heavier than the 405m
but I guess that goes to show how crazy heavy the 405m was
the 405m ain't heavy 
It's actually the same weight as the RG406H lol
What about the miniLED ruined it for you?
That's in the box with all packaging, accessories, etc just fyi. The unit itself is 260g.
That's the exact model I got, I'm crazy excited to get it. How long did yours take to ship? I just ordered mine yesterday so I anticipate multiple weeks before it ships
I don’t know whether it’s a me thing alone or others as well, but the fact that you couldn’t turn off local dimming was particularly bad for me because my eyes seem to utterly despises whatever makes it work on MiniLED in a way where HDR doesn’t bother me as much.
To be specific, it makes it so that, for retro and basically any 2D games in particular, dark colors look pretty much black regardless of what color it’s supposed to be, and makes bright colors look too bright (meaning if I tried to “just make it brighter for the dark colors”, the bright colors would end up being outright blindingly painful).
“Newer” 3D games didn’t seem to be bad, but it’s pretty much dependent on games not having too much of a contrast in color brightness from what I can guess.
yeah the Mini LED screen ain't ideal for 2D pixel-arty games
hard to deny that, but a lot of people probably ain't bothered by it or just use something else as we all hoard these devices 
So, when you have a screen like that and eyes like mine, I end up needing to turn off local dimming on any MiniLED screens I ever use just to ensure I’m not laterally damaging my vision. And when that device doesn’t have a fucking local dimming toggle for its MiniLED screen, that’s when I end up having to give it up.
With me in particular, I already know my MiniLED hate would sound crazy just for the fact that it’s outright something to do with my vision that only gets fucked up by this particular screen tech (like not even a general thing like PWM), so I’m already fine with people disagreeing on it (since of course anyone who doesn’t have whatever the hell my thing is won’t be bothered as much).
I’m still gonna complain about it since it’s something that could’ve been pretty freaking easily fixed by them simply adding a freaking toggle for local dimming. Instead, they haven’t updated the Odin 2 Mini at all since like a month or 2 after it was released.
Lol, AI sucks!
Yeah I don’t mind miniLED on my one miniLED device but it’s also a much higher end one (MacBook Pro) - and being able to toggle local dimming seems like a no brainer.
The local dimming on my m1 iPad Pro was ass
A lot of sites list the box weight as the console's weight for whatever reason. Honestly I don't even know why Anbernic bothers to list the box weight in the specs section of the product page.
Never tried that screen, skipped from 9th gen base ipad to m4 pro lol
The tandem OLED on the m4 pro is hella nice for retro games
yeah retrocatalog has very wrong info on it
lol yep ok
oh no
I honestly don’t remember the last time I used a headphone jack on something other than my dap
I refuse to play games on mute and sometimes using speakers is not appropriate
I really hope there some lower profile stick mods for this
One case where I’d actually prefer switch sticks
I'm curious to know if it will work with the same stick caps as many others like the Odin 2 / RP5 etc.
Introduction: The RG 477M is crafted from 6063 aerospace-grade aluminum, meticulously machined with CNC technology, and features an anodized surface treatment, giving it an extraordinary texture.
It comes in two colors: Silver Wing and Black Copper. It supports external expansion screens for 3DS and NDS, enabling dual-screen display functionali...
Ain’t wo way
gonna be pretty sick with the retroid one lol
The RG 477M is crafted from 6063 aerospace-grade aluminum, meticulously machined with CNC technology, and features an anodized surface treatment, giving it an extraordinary texture.
lol
wifi 6e, bt 5.3
smaller than i was imagining, with all that power this thing's gonna be a banger
battery life will probably be rough tho
i wont bite until they give e arc successor on this soc/screen 😛
also dont need the aerospace-grade aluminum
i'm here for it, that 'chocolate bronze' is too good
We're so hype for an Anbernic 3DS clone, but this 3D printed monitor hack job is what we ended up with instead 😂
"It comes in two colors: Silver Blade and Chocolate Bronze. "
Still better than DNA Duo
Maybe it’s a prototype tease.
Because they also do 3DS without a second screen.
It’s like they’re saying : „Hey there might be something coming in the future“
they're just letting us know to buy the retroid screen lol
Nah Anbernic‘s to petty for that
Also remember this
Maybe it’s just Max being petty
not on purpose i mean, just like 'hey it works'
it'll be a pretty great combo tho
Yeah some reviewers will definitely wanna test out that combo asap
Yeah, one of their Chinese mods mentioned before that Anbernic has the dual screen software ready, so this is basically their proof of concept
Oh yeah I remember you or someone else having mentioned that before
Now it all makes sense
tbh with both main emulators now having experiemntal dualscreen modes ... its not that much of a task for th SW
only needs to have some options for multitasking needs
There are always going to be bugs and compatibility issues with software and OS, so you really need good software support to like easily switch between different aspect ratios and make things user-friendly
Check out Onexsugar's approach to the dual screen software side, and even after seeing that, I still think there is alot of room for improvement
absolutely
just saying that for the basic usage not much more s needed
but advance userfriendly stuff is alwys welcome
aha, that explains it, all makes sense now
Oh heat will also be rough without something like a clip-on grip thanks to metal being a good conductor of heat.
weird flex but ok
"the Retroid thing is compatible with us!" almost like telling people to go buy from your competition
unless they come out with an addon of their own
I think it’s just them telling that they’re software is ready for dual screens like kitsune said
yeah, but who's selling dual screen accessories right now
I think it's safe to say they're developing their own thing.
maybe
Dual screen anbernic gonna go insanely hard
This is why I'm holding off on the Retroid 5/screen add on deal. I feel like as soon as I get it i9n hand someone's going to announce a true two-screen device. We're getting too close.
That colour does slap
I need lower profile sticks though
And gammaOS
I need lower price though
And plastic shell + T820, heck even a G99 would suffice
so, not happening then :c
Chocolate bronze looks awesome. That’s what I’m grabbing
Heh, very topical showcase with Paprium.
ok but he didn't say no to an Arc Pro with this screen 
Why not just get an rg406h??
too bulky?
That thing is super thicc
Full ergo build, super tall sticks, an unwanted sets style dpad at the bottom
They really just had to swap dpad and stick position and put a T820 inside the 405m
But instead they fooled my asshole once again with the 406H and 477M
Exactly, this is a 4:3 handheld.
Actually no I understand it now
I want a chip that can’t max out the screen resolution
Or run anything but the most rudimentary filters and shaders.
t820 can run a fair number of shaders
On a 120hz screen? And with black-frame insertion?
I know NES games don't need all that, but you gimme the power and I guarantee I'll find ways to use it. 👍
120hz with bfi shouldn't be significantly more demanding than 60 without
it doesn't exactly take a gpu powerhouse to display a blank frame 60 times per second
I agree that you can make NES hard to run if you want to go crazy with super high res highly demanding shaders (megabezel at 4k basically requires an actual gaming pc)
rg406H is 4:3, plastic shell + T820
Only .7 inch smaller but half the price
wait we know of 447m price now?
The 477 has a 38% bigger screen, yes, 38% !
$299 , $30 off first 72 hours. That is the chinese prices
Mind dropping your source
There is not a single console in the world that has the same price outside china as inside china
This is the local chinese price , that chinese pay
If chinese pay $280 , we pay $300 ex shipping, ex taxes , ex tariffs
let's just wait for anbernic to release us prices
Well, if chinese pay $280
Make a guess…
I know the answer
Okay well you should have specified that when you said "$299, that's the chinese price"
They do get $42 discount first 3 days, net they pay 1688 china which is $235 ex shipping, ex taxes, ex tariffs
Only first 72 hours
After that also back to $280 for them
This thing is gonna be as expensive as fuck. That is why they made it metal,
They will make a cheaper plastic one for $150 - $160 but first the rich impatient ones must bleed
Th picture of price is fake
Now the question is ... will they fix the D8300 issues for the 477 and leave the 557 swinging in the wind, or will this one just release as broken as the 557 is now. (I mean, I kinda hope that them working on this means that they'll actually fix the 557, but Anbernic gonna Anbernic)
I dont think anbernic has the juice to fix anything and honesty sounds like needs optimization from driver/emulator side which for switch ps2 I dont see that happening
what issues are you referring to
Poor emulation performance for a chip of its spec on paper
That it runs either slower than a T820 or hotter than the sun with fan at full blast.
It actually looks like they have WuWa running on the 477 where it doesn't run on te 557, so ... some work might be going on?
Still have the same damned bugs that their other Android devices do where the controller settings (Nintendo/Xbox modes) don't persist.
So where's the Photoshop guru who's mapped out the dimensions for this yet? Keen to know how pocketable it is 🤞
RG handheld group, the same one you are chatting in !
Right cuz we all know it’s illegal to lie on the internet
Wanna bet? I bet a $299 rg477 if i am correct
No not really
The guy who posted it, is working for Anbernic
Yeah my uncle works at Nintendo
can you tell him to pass a message to nintendo hq
that they are twats?
much appreciated
I cannot wait for the price to get revealed and everyone to complain about it 😄
I loved the 552 but the battery was sooo bad I’m afraid to buy a new expensive Anbernic now hehe
we complain about it and will buy it afterwards 😈
oh man yeah 😦 battery life on that is utter garbage xD a lot of anbernics now have much better battery life
All horse power, no driver support at all
Snap dragon has Turnip Drivers to help smooth out alot of Graphical Glitches & the Emulators support them. Mali GPU don't get any Turnip drivers or any support like that
so as someone who is hoping for Arc Successor with this SoC/screen .... does it mean anything for beetlesaturn/flycast? or those are fine
All good fun stuff
and the cycle continues for the next device 
Right, so looking at a Geek 6 benchmark it looks really good, but not so much IRL
So for Beetle Saturn/Flycast, No Issues
Ps2/Wii/GC, Wii U: No Issues
Vita/Switch: Issues 
fine by me for 4:,
The d8300 is absolutely not a Slouch of a Chip. Its a power house, able to handle sssoooo much. But it just lacks those drivers 🤷
There is a Poco phone with the d8300 doing switch emu showcase. It's doing phenomenal
I just wasn't expecting this d8300 to still be costing as much as it is
they totally overprice it, the Poco X6 Pro was like 200bucks shipped and vatted with the 12/512 SKU before it kinda got replaced by the new X7 with the D8400 (same power as SD8g2), which still is like less than the rg477m will be 
This is what I needed to hear 
Sit back & wait for some sales & discounts
I mean, Anbernic won't get the same bulk discount as a big phone manufacturer, but the rg557 was at least $30 over what it should be MSRP IMO and as nice as the screen and metal shell on this may be, the high price might make it even impossible for me to purchase it on AliExpress as many sellers don't ship overly expensive devices to Germany or only do so without pre-collecting vat (which was already pushing the border with the t820 devices at MSRP via Anbernics own stores) ... which would be a hassle for me, so I don't buy those 😅
Eh, it runs BL2 good enough - which is all the Vita I actually need.
It will run the Most optimized vita games for sure, but people will be upset when the rp5 (a cheaper device) gets more vita performance
For PS2 it's decent on the RG557, but you HAVE to use high mode and you get ROG Ally- like battery life.
Given what we saw with the 557, this should definitely be a device you don't buy day one. It's gonna be expensive for what you get and there will likely be issues... And Anbernic stuff always ends up significantly discounted if you can wait a bit.
Make the sacrifice for us all.
Imma wait for GammaNext to support it
Excellent, I like it when people are guinea pigs
I’ll definitely be buying
For $300 ex taxes ex shipping ex tariffs after 72 hours
Bad CPU governor which is fixable with 3c cpu manager
literally install one app and alter the scaling behavior once then live your best life
inb4 "I'm scared of tweaking and will just wait for gamma to fix it"
Hey, Is there a way to switch the ps Vita's touch screen controls to physical for the vita emulator yet?
I don't think you all realise, Anbernic has removed root from their latest firmwares
RG Slide with latest OTA has no root, likely the same with the 477M
No bootloader unlock means no root either, unless you want a brick.
So uhhh... Good luck.
no chance of gnext then?
So the Slide & probably the 557m won't have GammaNext? Or do you have other Plans for those devices?
Until there is a bootloader unlock, no CFW
Wtf
welp, so much for endgame
anbernic cant have a perfect device they wont allow it
each new device proves it more and more 
This should be pinned. As a warning for everyone, no CFW possible!
Think this is a sign to go back to the modded wii for awhile until anbernic gets their shit sorted out
406v stays winning
Wii U, don't sleep on it
.....so no gamma?
this device dead to me
even though it has the screen and the correct dpad placement
Never say never
I'm still excited, just need some time to figure out the bootloader unlock issue
If it's possible
real weird that they'd relock the bootloader via ota on the slide tho
Bootloader unlock on t820 still works
that's fortunate, just strange, i could understand leaving it locked with this chipset, but the cat's out of the bag with the t820
But the stock rom kills root, can still be added via magisk after the unlock. But I fear that the 477m will follow the same footsteps, no built in root and no way to unlock bootloader
But lets see
for sure, still hyped for this
i cannot wait to get this
Because you cannot play WuWa on a rooted device, it is clear that Anbernic will cater to the larger audience who are more interested in playing mobile games than having root access
and never play any games on it
ahh, gotcha, yah that does make sense
does this have enough power to run wuwa
Yes, but not at max settings
You can see the performance of Wuwa running on the RG Slide here: https://youtu.be/UBRn53ryftU?t=525
You can translate the subtitles into English~
周哥新掌机|安伯尼克|ANBERNIC
#handheld #anbernic #rgslide
It's pretty playable at medium to high settings
For games like Borderlands 2 (and many of the games that came out after the PSTV did), you enable PSTV mode in the emulator and you get physical controls. Borderlands 2 does need to be updated to (I think) version 1.05 or higher to get PSTV controller support, though. (I use 1.09... which was the last official BL2 for Vita update)
Definitely glad u said something because that's for sure the next project. Im almost positive its the same process to mod as the wii as it is for the wii u.
I’ll be honest the Slide is started to look better and better the more I hear about the 447M have no root for CFW.
Slide is still overpriced IMO but should be cheaper relatively soon
Not for everyone of course but still pretty neat and definitely unique
Rg Slide = 379 Grams
DSI = 214 Grams
Just saying on that end as well
Dsi = 18.9 MM thick
Rg Slide = 26 MM thick
So the dsi is thinner as well
but... he just said it right there that the slide also has no root
Yup and I realize all that and the Slide is not for everyone but not being able to add CFW to the 447M really is the big thing for me
Thickness and weight I can deal with
The latest OTA removed bootloader from the Slide. So it also can't have CFW, Gamma has said that yesterday. Effectively ruining its chances of having a CFW as well. Anbernic is doing a great job of destroying its CFW support for future development or at least making it extremely difficult
Did not know that so thanks for the heads up …..oh well
Will move onto something else
Yea, sorry to break that news. Anbernic needs to be held accountable for bad decisions
I can't imagine they care very much about what people think sadly, but agreed
Slide will still get CFW. We have a bootloader unlock for it. The latest OTA removes root on the Slide.
The issue is more around the D8300 devices, there is no known bootloader unlock. And now they're removing root on top of this by the looks of it.
root and bootloader unlock are two different things
(and if you can unlock the bootloader you can re-add root in gamma)
Haha, this company is living from bad decisions, that is their business model !
Root grants you superuser access within the existing OS, but you still need to unlock the bootloader to disable its enforced signature checks and permit flashing of custom firmware.
damn, maybe it's time to just go with the mini v2 and i dunno, glue down the sticks and shave off the grips myself haha.
tbf the Slide is getting somewhat reasonably priced in China
or live with the 480 screen on the 405m forever
I think I saw it being sold for like 170ish USD on Pingduoduo
not sure if those come with the OTA or not though
i'm not sure what the appeal of the slide is when the rp flip 2 would be about as thick, likely lighter, with a 5.5 inch oled screen
and what, 30-40 bucks more?
Give it a few months and you'll be able to find it for even less
aspect ratio
4:3 on a 4.7 inch screen is very good for some games
good point!
Yea, that is definitely my bad. Sorry 😞
which, is why i suppose i want the 477m to begin with yes haha
I honestly really want one of the Slide/477M just because of how nice the screen is for NDS/3DS emulation lol
at least as far as single-screen devices go
and yeah I'll probably pull the trigger if it drops to ~150
or less
Its all good you just posted the info you had at the time
never update, never lose root. always have control of the system. hack the planet
Never update, become part of the botnet. 🙃
when RH turns into Danzo
Raaah super sp!!!!!
Potatoes are roots
Lol, what are they thinking at anber ic? Silver with black with white on the pads with green, yellow, red , blue
Why didnt they just put ALL OF THE RAINBOW colors in there
Just swap em out
I like it
Ah yes, it should indeed look like the RG405M:
Colorful buttons don’t belong on a metal handheld… oh wait.
Exactly!
…Should I have had an /s instead of the “…oh wait”? Or would you have still ignored the sarcasm?
Bet you can just steal some from an cheap rgXX device and move on 
yeah skittle buttons aren't my thing, would likely swap to black
I like it but wish they had more color options. That classic silver is a throwback to the original 350M imo.
I've bought 3 metal handhelds and gave them all away.
but for some reason I want this one lol
I’ll be getting the chocolate bronze one
If I do ... I will get that one as well.
I want it.. just not $250 hungry right now.
Be cool, support SakuraRetroMods & get those Sexy PSX buttons they make for every device 😉
Especially on a device that will be capable of decent ps3 emu
ehhhh $50 difference is a lil excessive
especially with 256 storage 
but given how this kinda caps out at PS2, due to drivers, it's neat that we get a lower priced variant
yah, dunno if the balls out model is worth it, maybe if you want really tiny/terrible switch.. winlator maybe? haven't had good luck with that either on mtk, hoyoverse games i guess?
I mean if you intend to do Android games on it... maybe
otherwise ehh, I have different stuff, 8+128 SKU is a lot more reasonable
$290 is ... a hard sell to me. That's getting close to Odin 2 Portal territory and the Odin 2 Portal is better than this in pretty much every way. They must've realized that this was crazy expensive and came up with the cut down version.
Given how hot my RG557 gets, I can imagine that this metal one can double as a George Foreman grill.
eh, not remotely interested in <5.5" devices personally, this is a lot of power in a small package, battery life is my main concern tho, from what i've seen it's not great on the 557 & this will undoubtedly be smaller
doubt we will even see to many 12+256 models out there, nobody sane is going to pay that much extra for an device that can't utilize it
557s shit battery life is mostly due to their shit Android... bet Gamma could do easy 24hours game time on it, if he gets the bootloader unlocked
true, but that's an expensive gamble 
will probably get around to buying this next year when the price gets more reasonable 
technically this has to go below 150€ for me to be able to buy it on Ali... maybe ampown/geekbuying/gogamegeek will do a decent offer... I would be willing to pay like 180€, maybe 190€ 
I'm.. still gonna buy it day 1, just with a side-eye
still near endgame level personally as-is, but hopefully gamma is able to work his magic at some point & really make it shine. Saw that there's a couple phones using the d8300 that seem to be popular, some discussions around unlocking bootloader, so hopefully something from that scene comes to fruition for us.
i am kinda still hoiping by next year we will have Arc Pro version of this 😄

not really interested in getting a dedicated Saturn device tbh
Arc does Mega Drive just fine 
I am literally using the Poco X6 Pro with a D8300 as my main phone currently 
i just want ultimate ega device with this screen
for bettlesaturn and DC too
Arc is great and but its so close yet so far from pefection
i dont mind fuckin big 😄
gkd ubble is soethig i would neer consider though
overall not really into the memberberries formfactors
functio over nostalgia for me
They're doing different ram/storage configs now?
my biggest gripe with the bubble is the 3.5" screen, would it be 4" I would have no complaints 
well at $290 I bet most people would just buy the Odin 2
Yeah $290 for a d8300 just doesn't make any sense
$240 is way more stomachable and given how this caps out at PS2 due to drivers 8/128 is good enough
$50 of that are the metal shell tbh
still kinda wild that it's just $10 less than their flagship device 
totally expected $230 for the basic rg007 devices
Can always wait for the plastic one.
yeah the rg405p was fire 
Looking more at the "6" series for inspiration here.
The RG505 was my favorite Anbernic of the "5" generation, though. The 405M (along with the RP3+ Metal) taught me to hate metal handhelds.
good thing i forwarded this, original post was deleted, guessing he broke embargo 
cheeky today, was teasing that trimui will be announcing a new device soon too lol
is the slide not good enough?
Yes
I mean unless you need some extra performance no
🤘