#Anbernic RG Slide
1 messages · Page 11 of 1
Or at least way more comfortable
I can't play the RP5 sticks without grips. Some people like it without
Right but I get that I'm a oddity when it comes to grips or grip cases.
Ah. Gotchya. I think we'd be shocked to find it's closer to 50/50 then a no brainer. Outside of some handhelds that look like they were meant to cause pain
I mean steam deck is widely liked for ergos. But you'll still find some that hate it
I'm a sucker for flat back and flat back cases.
When it needs to be portable it helps a lot. I also hold verts completely different then I hold candybars
Slide will be interesting it's basically a square
I can't wait to get my hands on the RG Slide and just really...take it in.
I’m a weirdo I guess but I find verticals comfy
how i wish i can enjoy a vertical
the closest one would be the 406v
but even then its like le chonk
Chonk is good
That's fine, the bumpy back is overrated as ergo on too many devices, when too many of them still don't offset the controls even when they are large devices
While handheld makers have to share the blame, a large chunk of it should goto the switch joycons, they are the primary reason why this unacceptable control layout has been allowed to proliferate
It's like the stupid stuff android oems do to copy apple, even when it is a stupid idea like dropping useful ports or gaining ugly notches
RG Slide Mini when
https://www.youtube.com/shorts/5FrKbv4K-6M
My other YouTube channels:
Jacob R (video game hardware): https://www.youtube.com/@jrob0021
Jacob R TWO (video game news): https://www.youtube.com/@JacobRTWO
Crimpin' Cardboard (Pokemon): https://www.youtube.com/@CrimpinCardboard
Packin' Paper (Yugioh): https://www.youtube.com/@PackinPaper
My other platforms:
My Website: https://shop.jrobgaming...
this with p65 or T610 would be 
And a d8400? Anbernic can keep it
Where are you getting d8400 from?
Wrong. Consumers are why it's continued. Not Nintendo's fault. Certainly not the fault of companies copying the design of one of the best selling handhelds ever. 😅
Ah yes....NITRIX....most reliable, trustworthy, non AI, source on the interwebs......
Wow, that's an even greater slab 😅
@safe estuary I’ve not seen many BFI issues, any flickering has been on non-gameplay parts or if the machine can't reach 60fps
goes for n64 and dc as well
goldeneye 007 has some flickering but it's in the menus for example
Did an official price come out on the Slide yet?
Idk
Yes 179.99 early bird and 189.99 after with 15 dollars shipping
Thanks! I missed that
Thanks
God this looks gorgeous 
I think so too
It does. Just looks so good
Honestly, I know people love Anbernic. But imo it's a little shockingly good from them. Lol
Maybe I should get it but then they say to wait for the newer models.
Eh. Resell. Trade up
We're looking at probably a year between slide updates. Not impossible to save up the difference between a sale and the new model over the course of a year. I highly doubt every company is gonna start pumping out slides
Even if others would start working them I think it would take at least another 6 months (highly optimistic outlook) for them to actually come up with something since this design isn't that easy to copy and I think it requires a bit of R&D especially if somebody is trying to go for a slimmer approach of this design
I mean #1384188064087412879 message
Do we actually have a source that's reputable on this?
Also prototypes are easy to make
But making it to mass production is a long road
Doesn't seem like it at the moment, pretty crazy how quickly this came out though
I will say this it's impressive
But again I think it's a long way away from being in the hands of consumers
It's ZPG. It's a long ways away
Yayy!!! Thanks for Testing! Maybe the menu's in Golden Eye 007 ran natively all 20-30 FPS. 
Missed another ftn Livestream, I see...
More time I see the device more I understand why anbernic made it thicc
Thicc and grippable
Because Anbernic is all about dat booty?
I believe it's pronounced bootay
BigbooTAY!
My mouth is watering for this thing to come out
did we get a price?
180 + anbernic's shipping which i think is usually 15-20?
ok,not horrible but for how weird and niche a slider is it makes sense
the screen is new and custom made for them, so it definitely raised the price
Yh
It's mostly the slide and screen make the difference
If it was like normal 16:9
It would be cheaper
if they make a slim XX one, with the 40XX screen id buy one for the form factor
Using h700
sure
yeah
i doubt theyre done using the h700 chip honestly
we'll find out in a week or two
that would be nice for all the 5th gen systems back
For me rg slide make sense more than doing rg slide xx compared to like rgcube situations
A Slide with the A133P and 2gb of ram would be nice
Not going to happen like ever!
For all the "Dirty Stretchers" out there here's how you fill up most of a 4:3 Screen while playing PSP games. @jagged stone @celest thunder
To play PSP games with a 3:2 aspect ratio on a 4:3 screen, you'll need to adjust the display settings in the emulator you're using. For PPSSPP, you can adjust the aspect ratio in the "Display layout & effects" settings to 0.85 or a similar value to achieve a more accurate representation of the 3:2 aspect ratio, according to Reddit users. This will minimize the distortion caused by stretching the image to fit the 4:3 screen. [1, 2]
Here's how to adjust the aspect ratio in PPSSPP: [1, 1, 2, 2]
- Open PPSSPP settings.
- Navigate to "Display layout & effects".
- Find the "Aspect ratio" setting.
- Adjust the ratio to around 0.85. You might need to experiment to find the best setting for your specific screen and games.
Some games may also have specific cheat codes that can force a 3:2 aspect ratio, says a user on Reddit. You can search for these cheat codes online or in cheat databases for PPSSPP. [1, 3]
https://www.reddit.com/r/SBCGaming/comments/1d44gtg/do_you_play_psp_games_on_43_screens_with_a/[2] https://www.reddit.com/r/SBCGaming/comments/155ghsn/640x480_35_4_handheld_owners_a_middleground_psp/[3] https://www.reddit.com/r/retroid/comments/1h71lyu/can_i_run_psp_games_in_43_aspect_ratio/
Oh yeah! 😂
Using overlays you could do something like this for PSP
True but I want to fill out most of the screen with less degradation to the image.
can you do overlays like that in standalone PPSSPP or do you have to use RA?
i use 0.85 on my rg35xxh
looks pretty good tbh
Retroarch iirc
Its a big enough screen that I can't imagine the overlay causing too much of a compromise
i use similar for my rg405v
Warriors Orochi 2 go brrrr
I love everything about this
Sweet, thanks! I'll have to try this.
Question: is there a big jump in performance between this with the t820 vs a 557 with the dimensity 8300
Not really a jump. The price difference is too huge
https://youtu.be/xtj4L7QhyXU?si=fYKtIIU-he0yn0-q
Anbernic RG557 Review – Full Breakdown, Gameplay & Pros/Cons
The RG557 is Anbernic’s follow-up to the excellent RG556. It brings some solid upgrades—like a Dimensity 8300 chip and Android 14—but also makes some weird choices, especially when it comes to the thumbsticks and pre-loaded software.
In this video, I review the RG557’s buil...
To be honest it's not a jump because anbernic didn't let this chip full potential
Basically didnt optimized that chip properly
all the cost of a powerful chip, all the performance of a mid chip, it has it all
Yep
I heard they released an update to optimize the performance so it might be better now
yep
i wouldve preferred d1100 though
i could see the 190 price tag with d1100
as it can handle like ps2 and gc 2x res
but not all of it ofc
Only high performance mode tho
I agree! 👍🏿
Android crew - loads of Sega games are getting delisted soon so they're giving them away for free:
https://www.androidauthority.com/sega-retro-games-android-free-3568153/
Installed them to my Odin 2 Portal. Tried Crazy Taxi and it worked.
I’m still waiting for this handheld to come out!
Friday!
Some PS2 games at native resolution.
Welp I guess moonlight it is.
But can this play god of war 2?
Here's a compatibility sheet
https://www.reddit.com/r/RG556/s/7kfPeD3Yx8
God of War 2 shows as running great at native res
Thanks
you get raw performance. that's it.
The t820 actively cooled performs almost the same as a d8300 running stock, so do the anbernic firmware update asap to remove the nerfs
Just check any review for the RG556, RG CUBE, RG 406H, or RG406V - they all have the same processor as the Slide
Thanks
So yes, a big jump!
For reference, this is peak ps2. I rate even shadow of the colossus and shining force exa as easier to emulate.
https://youtu.be/Vbd7I5pUqvw?t=2
just a quick test at 1x 1:1 to see if screenhacking works. protip, it doesn't but whatever.
is it even worth getting now or would they come out with a slimmer version within the next year or so like a v2 or pro version? because the only thing making me hesitant from getting this is how bulky it is
If you're hesitant on getting the RG Slide, I'd hold off on it in case if Anbernic decides to revisit this design with specific tweaks and changes.
Everyone says "I'll wait for the next version" but if everyone keeps that attitude there won't be a next version lol
But as a consumer, it makes little sense to buy what you don't want in the vain hope that a company might eventually make what you do want.
Honestly it doesn’t seem all that good considering the potential price point and size. I’d only get one because the PSP GO is my all time favourite handheld
Do device makers optimize chips? I thought it was basically driver support which this has none.
It's mostly software that they have to optimized most time
If the slide does at all well, I expect we get a 16:9 version witin 6 months
Even if we don't see one, this slide will be quite a lot cheaper in the first ali sale after the launch
Exactly, if nobody buys this anbernic will be less likely to make experimental handhelds
Though I get why people don't want to buy it if they're not happy with it
but you see, if anbernic makes a handheld without some big flaw, peeps will stop buying new handhelds to cover that flaw
I mean the software is emulators. Its mostly driver optimization which no device maker is working on
Driver optimization with mail always main issue
Thats my point tho. All these retrohandheld makers just install OS and/or install Emulators. Nobody does optimization. Thats all community driven
I'm talking about their Stock OS in general
Anbernic stock Os is like not bad but not good compared to retroid and ayn stock os
Putting updates and stuff
Buddy I think you're just making stuff up. Retroid runs better because they choose SD SOC which has many driver support. End of story. Nothing about optimization from them.
Okay maybe you don't understand me what I'm trying to say
But it's okay
RG Launcher could've been made better for beginners in mind.
True*
Even though, I would immediately get rid or ignore RG Launcher, I do hope Anbernic could think about improving RG Launcher.
Anbernic need to think about not repeat the same mistakes of rg557 launch
Overall
no that's untrue
there is more to optimization for gaming than drivers
there are more tools and a better UI for those intending to play games on retroid devices
and yes it probably runs better
not because of drivers which are only relevant in gpu
but because of optimization and general power
Within a year or so, The RG Slide would be added to the Gamma OS T280 devices.
Fortunately somebody made a custom android using lineageos, otherwise it'd be stuck on android 12
What do you get out of running Android >12 on it?
Some android games won't run on earlier versions
Also the RG Slide would be shipped with Android 13 unless Anbernic changed it at the last minute.
Also I think switch emulation is better on android 13 or above iirc, I forget the exact reason why though
I think more recent versions of emulators just don't support versions of Android before 13
That's probably it
Ahh ... I've not had anythjng I want to run NOT run on the Edge's Android 12 build. But I don't give a shit about Switch emulation, so that might be why.
Razer Edge's display has always bothered me immensely lol
20:9, I believe
I know that's for Android gaming but I don't do much of that at all
OLED black bars are invisible. Just sayin'.
For widescreen systems it's not too bad, iirc it's like 5.5 inches still, 4:3 just looks silly though
I mean I know that
It's more just the knowledge of the constant unused screen space
Unless ultra widescreen hacks exist on Dolphin mobile
Maybe for a couple of games
It depends on what do you want honestly
I did the comparison - you get slightly more real estate for 16:9 and 4:3 games on the edge than you get on the RG556/7 and RP5.
👀
I actually really like some of the tools Ayaneo includes. Being able to modify different aspects of their performance mode or mess with fan curves.
So satisfying
Screen is nice
Man. I'm so happy they didn't go small as someone who wants it for an all rounder and not niche. I mean I get some people like having a diff handheld for each system. Can't fault them for that
But this might be my main pocket warrior for a while
It’s chunky for sure
actually serious. make a t618 version and that would be perfect
im kinda there with you.... t618 would have been enough power for sure and could have reduced the rather chunky boi aspect lol
I actually am somewhat surprised by the gc and ps2 performance. It’s been a while since I used this chip.
Also, cyberpunk? 
Looking good
Lowkey the screen is kinda good for streaming
I’m waiting for when this drops.
True
120hz and a game like hades is fun
It looks incredible
Damn. That's a solid use case I didn't really think of. Heh
Our writer @granite gate 's impressions 
Set up trinket OS and ESDE on this thing and youre set
instead we will get the SlideXX or some shit
Slidexx is inevitable
Why do I feel like if Anbernic did make the RG Slide XX, there would be a monkey's paw to the screen?
58hz refresh rate
FYI It’s currently available early on the Anbernic Official Store on AliExpress for £220 which seems a lot to me, and by the time you add on shipping and the case (if you want one) it’s more like £250!
Will see what price Anbernic’s own website comes up with when it goes live but too expensive for me on AliExpress!
Well it was on there a short time ago but it's gone now so there is hope that the final price will be lower!
Wait for sales I guess
How are the ergonomics
$500AUD??? I bought an Odin 2 for that... 2 years ago!!!
Hell, I think paid less for an N100 Minibook X... yeesh. Expensive for the specs
wait I just got the RG Slide launch email 3 min ago and it's already out of stock? 😭
Yep
They does that until launch date
I believe it's not put up to preorder yet
I'd hoped for a lower price but I guess it's a justified one...?
It's not put up to pre-order yet so you have to wait until launch date
I'm not shocked
At the price
Oh okay thank you I didn't understand
Nah, me neither... but you add a few bucks more and you can get the Flip2 or Rp5 that can play more
150 or no tanks
Can we order it from when?
No BFI on Retroid, though. If you're into that, of course.
Never tried it so I can't say
But even then as Russ showcased turning brightness back on for the Android part is cumbersome for me
this won't be sold before the 20th anyway
there is no pre-order?
With Anbernic, you usually just order it when it comes out.
They don't usually take your cash and sit on it for weeks or months, unlike some of these outfits.
Would a slidexx using say the 406H display be a bad thing for example
Yeah. But then you have to deal with flip2 and RP5 sticks 
yeah, because they produce these in bulk and I bet 80% go straight to 3rd party sellers, unlike Retroid/Ayn/Ayaneo who assemble them according to demand and only have a few units left in stock after launch anyway
Give me slide stick position on flip2 and I'd be so happy
I'm totally fine with them o.o'
I mean RP5 are just bad. Flip2 are ok
For my big hands non inset sticks are just uncomfortable in general
Wish more makers would even just do what the steam deck did
Well, rp5 isn't great for FPS games
Which is unfortunate cause the chip would support a ton
Isn't it well-established that no one at Retroid has hands? They couldn't both have hands and lay out controls the way they typically do.
And flip2 is a bit awkward for 3rd person action games
But yeah, anything with sticks and shoulders on the RP5 is pretty meh. And on the flip 2 it feels kinda crunched to the top
The placement on the flip 1 tho 
Regardless, I manage to wear just the right pocketed pants to cause flip2 shoulders to catch every time. One of the reasons I'm excited for this river stone
RG Slide or river stone? (Hard to even tell)
lol, river stone sounds about right 😛
RG Slide IceCream Sandwich
Btw, the cover will also be available on the day of launch?
you mean the screen protector?
No worries
if only it was possible to "try" the ergonomics first before buying, my only concern with this is playing action games like MGS2 with this layout
Eh. Resell early enough and someone will buy for close to retail
Unless you're like me and don't get to it, or forget you even bought it, til months later 😆
the ergonomics are not traditional on this device
if you have small hands I don’t think I would recommend
Yhyh
Not necessarily but it wouldn't surprise me if Anbernic did a minor change to it that would make people a bit annoyed with them.
I'd love a SlideXX but only if it keeps the 4.7" 4:3 screen. To me that's a major part of the appeal.
I'm debating if I should go for this or wait to see if Anbernic uses this screen in something else
If you're not fully on board with the RG Slide, I'd wait and see if Anbernic would revisit the Slide's design again.
Agreed
They definitely will , you don’t make a custom screen just to use in 1 handheld
I was fine with the design until we found out a T820 ,which is fine just personally wanted something with a bit more juice + I already have a T820 device and don’t like buying multiples with the same SOC
Which is understandable (it's too late for me though), I get avoiding the RG Slide for the chip set.
There are already rumors of a 477m using this screen
Do you already have one 👀
Yep
His full thoughts buttons good screen beautiful
The weight: you played yourself
Ergonomics no no
I'd say its really down to preference. I'll leave the judgement to the reviewers haha
hopefully retroid makes a slide
Or ayaneo or ayn
Or even red magic
RED MAGIC THIS IS YOUR CHANCE TO ENTER THE HANDHELD SPACE
Watched this and was wondering what it would take to add a gamepad to a phone(physically attached not mcon etc.)
My other YouTube channels:
Jacob R (video game hardware): https://www.youtube.com/@jrob0021
Jacob R TWO (video game news): https://www.youtube.com/@JacobRTWO
Crimpin' Cardboard (Pokemon): https://www.youtube.com/@CrimpinCardboard
Packin' Paper (Yugioh): https://www.youtube.com/@PackinPaper
My other platforms:
My Website: https://shop.jrobgaming...
Razer used to make an attachment
That could work with modern phone
was this just a concept? i dont remember this ever existing
but it looks awesome
https://anbernic.com/products/rgslide page is up
RG Slide Technical Specifications Color Black, White Screen 4.7-inch LTPS In-Cell display, OCA full lamination, multi-touch, 1280960 resolution, supports a maximum refresh rate of 120Hz. CPU Unisoc T820 processor, 6nm EUV 5G SOC chipocta core: 1[email protected] + 3[email protected] + 4[email protected] GPU Quad-core Mali-G57, 850MHz R
Razer Junglecat, it was out for iphone 5/5s but I can't find anyone selling it
Apparently it must've bombed because Razer didn't go back to that well for future controllers.
And I think I'd rather actually play on my Kishi v3 than on that sliding thing.
I think it's worth revisiting, 2014 was very different than 2025 in the mobile space
if this can honestly fit in your pocket & you dont mind the bulge it would cause, id say it's worth it
I think the design had plenty of room for improvements
Probably worth a few attempts, at least ... we'll have to see how janky and uncomfortable stuff like the mcon is when it actually gets shipped.
Iphone 5 was pretty small sized compared to size of devices now
Coming from a psp go i think ergonomics on the slide will be just fine after a bit of adjustment to its unique shape. Im extremely tempted to bite the bullet on this one.. this one my favorite pocketible form factors along with my favorite screen.
I love my 406V but yeah, carrying it around isn't easy. If I didn't already own one I'd probably get the Slide instead.
same thoughts
yeah but what are we gonna do now that we do already own one
I am seriously considering removing the sticks from it 👀
Interesting, Anbernics latest OTA removed su binary / root access
I haven't updated yet, should I hold off if I want to install your OS?
Nah do what you like, my OS will come as a full package
OK. Don't need this AI stuff on my handheld anyway
Just as long as I can still unlock it
I usually tend to lean towards 3:2 or 16:9. But with 16:9 content being the same size as the PSP screen, this screen just feels like a big win.
NGL. These handheld companies are shooting themselves in the foot
If it's not able to run android 16 i don't want it
Nah, the sticks are amazing! I made a 3d printed case so I can at least carry it around in a small bag or large pocket. As cool as the RG Slide looks I'm going to skip it.
Ya. If it was H700 or something slightly beefier with a 16:9 screen for psp games at 1-2x scale. I woulda bought instantly
Why
Specs and screen are ideal for me!
Upcoming desktop mode feature and actual support for external displays.
Why dont any of these android handhelds have android 16? Are older chips not allowed to have newer firmware?
Probably cause either the chip manufacturer and/or the device manufacturer can't be bothered
That's kinda untrue. The pixel 6 is the oldest phone running android 16 I know of (proof. I have one running the dev beta)
Ah, I don't personally dock my handhelds
That's why I like my deck so much
But something pocketish sized I can play on the go then dock to remote into my desktop would be ideal.
I tried that with the steam deck, it was cool for a week and then became too cumbersome
Not really for me. Most of how I game and work on my pc is via streaming
Sure but when you need a full size keyboard you might as well just carry a laptop
Not really. I'm mostly gaming when I'm on the go.
So steam big picture streamed to wherever Im sitting is enough
But I do have a laptop I carry as well. But not that great to game on besides at a table
Well a issue for me with docking, I would need to upscale and I don't think this chip upscales that high
For most games 720p would be fine on any TV.
But that's cause I'm not the kind of person that splits pixels.
Ig it also depends on what you're playing, under 3D systems under PS2 probably can get to 1080p?
Probably. Haven't had much chance to mess with chips like the t820
Idk I'd personally get something like SD G2 if I wanted to do docking, just safer bet it would upscale better
Anbernic's T820 devices cannot charge and output video at the same time - so they basically don't work with docks. You can hook it to an external screen, but only while on battery power.
Classic Anbernic engineering
Iirc it's just a limitation of the soc
Yeah ... basically Anbernic just chose wrong.
Well, wrong for a handheld that you might want to use in a docked configuration.
(Ironically, one of the cool features of the PSP Go was that you could use the Go as a full-on mini console with its dock and a PS3 controller - many years before the Switch existed.)
Ya. So anbernic really dropped the ball on this handheld
once again sony was ahead of the game and just didn't bring it back
The slide XX gonna be the better version if they slim it down
D1100 would've been a better choice for this I think
I think even the D900 would've been better
SD6 would've been my choice
Would have been nice if they'd picked something PS2-capable that could also be docked, but ... we got the T820 because Anbernic apparently has a warehouse full of these chips. 🙃
Fr
and that stock pile issue gets worse the more they use the H700
I swear Anbernic must have an iron grip on all the loose h700's and T820s
We've got what now 8 handhelds with that nugget of a soc?
TBF. Can't complain at that
So I guess we had a choice here ... the reasonably powerful but undockable T820 or the can't even play PSP properly but dockable H700.
you can fudge it though
Ya
it can charge and output display so it's good enough
They could conceivably make a dock that would work.
My 35xxH spent many hours connected to my 2nd monitor to play shmups
I don't think I've really spent any time playing any of my handhelds docked
I think I played OoT last year for like 3 hours in a docked mode
with my setup it's not really viable to dock any of my devices besides consoles that are already hooked up
I don't usually use Android handhelds docked either, I just mentioned the docking thing because using docks was under discussion and the Slide's a T820. If I dock something / use an external screen for anything other than gameplay recording, it's going to be a PC.
Ya. But with android 16. Android is becoming more desktop like
I like my steam deck but it's also huge, so I can see the appeal of wanting something smaller to dock
Samsung were even helping out Google develop their own implementation of what is essentially Samsung Dex
Mhm. Especially android
Since when I travel I usually have an android stick in my bag. So having a dockable android device would eliminate a device completely from my bag.
I like Dex ... especially on my big galaxy tab ... but they've got a ways to go to even get to the functionality of even something like xfce from twenty plus years ago.
Kinda cool - if impractical - to have four emulators running at once while looking at Discord on a tablet, after all.
Id say there at KDE3 levels of functionality. Maybe early kde5
Most things work and look alright.
But app support for it can be a little hit or miss
What I really don't get is Apple and Stage Manager. Okay, so Apple has a whole-ass DESKTOP OS to model stuff after ... and on a big iPad Pro with basically a laptop chip in it you're saddled with friggin' STAGE MANAGER?
then ChromeOS scales android apps surprisingly well
Big hands you say...
Best investment was a household Chromebook we just leave in the living room
I am still trying to decide if I want to get BEEFCAKE PSP Go (the Slide) or not. Decisions, decisions.
Their fixing that in the new iOS.
the screen not being centered to the glass would be such an anbernic move 😛
NGL there would be a huge market for handhelds with the same overall dimensions as actual consoles
looks at the 34xx yup
Do we also have Ali links?
https://a.aliexpress.com/_EHf6GQi
This seems to be it
The carrying bag is kind of boring
At least it's better than that happy meal case for the 557
Still like it over most Retroid cases
I'm talking about the case
oh, okay... probably?
Actually I looked on the site and it's good it's available, it wasn't the case yesterday
No pun intended? 😝
xD
The ~200usd price will indeed suck
Probably cost more to develop than they thought so had to put a weaker chip in.You are buying into the form factor on this one.If you are not attracted to that then yes it's just an overpriced handheld.Once you add tax and postage it really is quite pricey.
thankfully there is a wonderful thing we can do in these scenarios
not buy it?
Lol they just slapped an outline image of the handheld itself
you win the prize 😄
yeah because if nobody buys it they'll definitely make a successor thats actually good
a little overdramatic but ye
If no one buys it, I doubt we'll see more slides for a bit
wdym Ronald MacDonald case is absolutely peak
no greater handheld case has ever been made
But can the rp5 slide?
I can slide it across tables
you can get it on Geekbuying for € 179.99 😛
maybe with coupons but the pre-sale listing is 199€
if you're lucky (like me)
I mean I'm more interested in this than RP5. I mean I know its a big hit. But at this point I'd go portal for couching and mini/this/classic for portable
this is not more portable than the rp5
might have to skip out on this one unless I have $180 laying around. would probably rather get the rp flip 2 which is what I'm saving up for atm.
yup with NNNAMARGNO coupon
Er. No exposed sticks. Boom, I win
RP2 Flip is a solid alternative, and portable
yeah, but it's like double the thickness
Except with sticks it's not tho...
being hall sticks, it doesn't really matter having exposed sticks in your pocket
Like what a wild statement to make. Lol
No one ever said this in history. Lol
They catch on stuff. They pop off. Even hall sticks will eventually get damaged
well i am particular about having exposed sticks
but if they're hall sticks, i don't mind them being exposed in my bag
Only time Ive ever seen pocketable sticks is with a face shield or super recessed to the point they don't stick out
Found a pretty good way to make use of the power even if it's through iOS!
Yeah. That's a fine personal preference but one not shared by the majority
Most people aren't just throwing an RP5 in bags without a case or something
yes, but that's more about the screen than anything
at least in my case
i know the sticks will be fine
What are your guys' thoughts on the on the RG slides price point? I'm considering passing on it for the Flip 2 but the Slide would really heal my inner desire for the PSP GO
it's around what it should be
It's expected people thought it would be cheaper which I'm surprised
given the option i'd buy the flip 2 anyday though
personally I'd rather go with the rp flip 2 for now until they come out with a v2 for the slide. just a little too bulky imo
if they made it slimmer then u have my attention
I don't mind the bulk honestly. It still seems to be a good enough size to hold and i don't really care about pocketability
what're you looking for? is it just the form factor that appeals to you? does performance matter? which systems do you want it to play up to?
Price to performance isn't great
in terms of performace, I think the rp5 or rp flip 2 is better right?
Yeah
this is RP4 level, while the RP5 is a side-grade to the RP4pro
so yeah, RP5 and Flip2 are way better
this simply is at least 30 bucks too much
and honestly with the RP4pro being out there for $149+shipping, in terms of price to performance this is a damn bad deal
PS2, Android Games, and some PC emulation
like base RP4 was $129 before they sold the remaining units iirc
I think it's something we'll see down the road if they use a chip without active cooling
i think the price makes sense, but they also made a product that doesn't make much sense
I mean if they didn't had custom panel on screen
Wdym it's doesn't make much sense
Except to anyone who wants sticks that aren't thrown in bag or shoved in pocket...
then buy a flip 2
Like it doesn't make sense for you specifically. But for a lot of people it makes sense
Likewise flip 2 shoulder buttons are annoying in that regard. I also dislike stick placement. But that's a more personal thing
Flip 2 is fine but not everyone wants a clamshell like not wants a horizontal vertical device
these are digital inline shoulders so they won't be much of an upgrade
Again totally depends what you're playing. For most of this systems catalog it won't matter
slide form factor is a downgrade in every single way from a clamshell
okay, tell me the advantages
Mp3 player
380g mp3 player
It's dual purpose you numpty. Lol. Stop moving goal posts
You can switch playing andorid games touchscreen
Yeah, makes it hard to lose 🐈
Doesn't feel like it's phone attached to controller
"name one way it's better" "ok here" "well something unrelated in this comparison is lighter"
yeah it's also a better watch
doesn't make it a better gaming device though
the controls are more cramped, the screen is smaller and worse
Well you didn't specify just gsming. You just said how is it better...
Having digital inline shoulders make it easier to put inside your pocket
Worse
Touch android gaming this is 100% better
Don't even need to open the controls if you don't want to
a 50 buck phone is better than it though
Are we speaking French
But doesn't have physical controls when you want them
$50 is also better than flip 2 in that regard
Then you waste your battery life on your phone and oh yh your phone get heating
Your not making fair comparisons
Thank you
i'm just saying the compromises are so big that it doesn't make sense
Yeah. Like this is dumb. Make real arguments
*For me
And that's fine
if you want something for touch android gaming you'll get a second phone that is a third the size
The point is to be multi purpose
I can say odin 2 mini is better than flip 2
For me the compromises are worth it for an all in one
Btw even odin 2 mini is heavier than rg slide
And it will do some things objectively better than the flip 2
at 10x the power
I would have taken this at 179 if it was like half slimmer than it currently is
who would have thought
i don't want it either
i missed that this thread is called anbernic rg slide fanboys
Then what is your goal? Use poorly formed arguments to win fights online?
More expensive than odin 2 and odin 2 portal with less battery life get hot while playing ps2 and gc
retro handhelds are all about nitpicking, lol
It only makes sense if you provide good arguments. Otherwise you're just stating what you want. Which is totally valid. But you can just do that and move on
i am just saying this is a jack of all trades, master of none and that it's overpriced
and that if you don't need a screen at the front at all times, the flip 2 is a way better deal
*for you. And it's not for me. So where do we go from here?
Obviously sales will validate one or the other anyway
well maybe you shouldn't take it personally
I'm not. You are. Smh
lmao
It's not even fanboys it's fine if the device is not for you but try to act rg slide is not worth or making a device that doesn't make sense is stupid argument
We gave you valid responses and you just move posts
my opinion is that it's a badass concept but they just didn't make it in a way that appeals to me
And that's fine
We welcome to every form factor in this community no matter what good or bad more good than bad
Maybe v2 will fit your desires better
like if it was a budget t618 with a widescreen and half as thick it would be the best psp you could have
if you're looking for higher end systems to emulate like the ps2, rp5 or rp flip 2 would be a better bet. has better performance overall compared to the slide.
Hopefully they'll drop one like this. I personally prefer thicker devices for ergos in general.
Especially ones with sticks
not much ergos if it's flat but thick as a brick
Agreed on the overpriced part at least, would've made more sense at the $160 ish range
Then all verts are ergoless 😆
Ok. And that's fine for you
I don't get it if we even got d1100 on this device they would charge it more than rp5 and flip 2
I personally disagree. And clearly the market likes verts and prefer some layouts over others
i have more verticals than anything else
Masochists
Disgusting
The price is fine end of Even good thing it would cheap in few weeks or one month
i'm not just shitting on things, i have experience on stuff
the worst part about this is being top heavy
Every new form factor has an initial sticker shock. But it's how we get iterations later
I won't make this judgement til I hold it. But yeah it'd be better if it was centered
So far reviewers seems both fine with the weight distribution and upset about it
You guys should be more happy because with d8300 we got rg557 situation
i am happy this isn't a d8300 because at least it's not instantly dead
||would've preferred a d8300 tbh||
Id taken either. Honestly both would let me play what I'd want to on something like this anyway
i wish anbernic would get a full ps2 chip that isn't that expensive
Unfortunately this is not like retroid and ayn does it that they can make sacrifice for the price
well, they should
They seem very averse to snapdragons
it's not like retroid or ayn make money off selling games or anything
Who knows. Maybe ayn/Retroid have contracts that gobble the stock
for me anbernic only excels in the budget - low mid tier range
but then they try to carry the price premium to their more expensive devices and it makes them not worth it
I've heard mixed reviews for their higher end stuff yeah
Yes that's why they got more money than both of them
Performance seems expected on this tho. most complaints are size/weight related and those I can compromise with
They might've been in talks at some point
Anbernic is like cheaper option for everyone while ayn and Retroid more taste for advanced
Feel like snapdragon is whoring g series to everyone at this point
If expect Anbernic to have decided no
for me anbernic is a budget brand that keeps creeping into the midrange without many actually good results
Secondly everytime they priced over 200 their devices never good well like rg552 , rg557 and anbernic win600
i totally love them and i've had more anbernics than anything else by far, but they just can't seem to make much mid tier stuff that's actually interesting to me
Thank goodness this is less than $200 😆
Under 200 they get it more sales under 100 it's money maker
And also they are only top 3 that never discounted their devices from their website
they usually get good deals on ali
Exactly
like at face value the 406h and v are awesome deals, but still not good enough
as someone that has budget, mid and high tier handhelds they're kinda in no man's land
It's still best 4 inch devices still
Look at retroid pocket mini while better than rg406h look at the situation
yeah, they make the best 4:3 stuff at least, i'm excited for this screen on different devices
It's more funny that anbernic rg35xxsp made them more money max thought he was vince McMahon
well, it was a great device, i'd only complain about the loud buttons
Anbernic is not always going to get everything right but I really appreciate how they are always try to do something new
which they fixed with the 34xx sp
Even if it's shit device and it can be shit device
i guess my issue is i find the t820 a stupid chip
Disagree
like in 10 years, a t618 will be a perfect psp device, and an sd865 will be a perfect ps2 device
I find t820 as overachiever
but the t820 is middle of the road
Pushed the limits
D1100 in this would've been 👌
More overachiever than d900 and sd845
I thought T618 was already supposed to be quite good for PSP
well, i'd have the same criticism for those
i had the odin 1 pro too and it was disappointing
that's what i said, t618 is perfect psp
Odin 1 pro what a time 🥹
But you said in 10 years
any t618 device, which is perfect psp today, will be perfect psp in 10 years
but the t820 will not be a perfect ps2 device in 10 years unless the ps2 emulation scene in android comes back, and even then
Sometimes it's enough for people
Hell if you want perfect ps2 emulation you go to x86
Or go to sd 8 gen 2
Like odin 2 ,mini and portal
Plenty of options if you want a good experience
Exactly
well, the 865 is good enough easily
It's good and nice as well but it's not perfect until we get same perfect like pcxs2 on andorid
But anyway the point is we don't even got enough slide obviously because of patent and stuff
But at first attempt they did alright job
I feel the same way when it comes to clamshell
I mean good clamshell
Well we've finally reached a release without broken hinges or mechanical issues so that's a win
Amennnn
Next up : dual screen clamshell
Actually, the Odin 2 Mini weighs slightly less than the RG Slide (320g to 380g).
Is it actually 320g
😭😭😭
I literally forgot
Even that because I used that device from my friend ones I didn't feel like it was heavy
To me
According to the Retro Catalog and website and the Ayn Odin 2 Mini webpage, the Odin 2 Mini is 320g.
I literally forgot I thought it was 420g
😭😭😭
The Odin 2 Portal is 430g.
But the Odin 2 is 420g.
I know odin 2 portal weight
Hard to believe the OG Odin was 368g.
it was super nice to hold
I was a bit bummed the Odin 2 gained weight, but got used to it
was a bit sad to let the og Odin go ngl
I still got my OG Odin Pro, surprised that it's holding up rn.
The flip is probably a better choice unless you care about the 4:3 screen on this
I feel like this is what we'll be hearing a lot of in reviews tomorrow
"the slide is not bad but for a little more most people will be better off getting a flip 2 instead"
which come to think of is pretty much how almost every high end Anbernic is reviewed
"not bad but for almost the same price Retroid is better"
I wonder what the QC issues will be this time 
Going live with Slide in a few min to test more games and see if we can answer remaining questions before launch tonight 
Stubbs, Rob @retrotechdad and Andrew hang out and test various games on their Anbernic RG Slides, with a main focus on Sony systems (but we'll see where it goes). Hop in to ask any questions as you prepare to make a decision to pick this one up or not.
The RG Slide goes for sale tonight (June 20th at 3am Pacific).
Order direct: https://rh-go.l...
This is one quirky device. Is it the next best handheld for retro gaming? Is it too niche for it's own good?
If you're interested in picking one up, check it out here (affiliate link) to help me out:
https://bit.ly/RGSLIDE
00:00 - Intro
01:09 - Specs
03:01 - Colors and Case Accessory
03:45 - Price
04:53 - Device Tour
09:00 - Controls
11:5...
Any word yet on when shipping will start?
RG Cube is way quirkier than this. I mean ... square screen Android?
Hey I guess I wasn’t allowed to publish this yet
Will go live again in like 6 hours
Anbernic with that nintendo pricing 
oops
good video though lol
Hmm, I doubt the RG Cube is the only square screen Android device. Granted, people's definition of a square screen can vary.
🦄
A1 Unicorn is the other move
Also the Powkiddy RGB30.
Not Android.. unless you count Gamma 
Ayaneo DMG and Retroid Classic are close enough to go into this category
Kinda.
I think it counts tbh
Android off an SD card
What an idea
I hated it, love the Mini. My 11 year old shoes the RP5. He wouldn't take the Flip2
Do we know the price of this ?
$179.99 for three days then it's $189.99.
Not sure if the $15 shipping is included in it or not.
https://m.youtube.com/watch?v=6LEAj3xcAJQ
I found this
I think we can expect some very light ps3 games to run on the slide
Of course it's best to keep the expectations low, but it's nice it's even able to do that
I wanted to see if this handheld is able to run ps3 since it can run a number of switch titles. So I tested 6 games to see what the limit may be. Last game does have a lot of screen flickering so please be advised.
List of android rpsc3. First one is the last update version. Second one is the new one in development. No games are distributed in ...
Uf, too expensive for what it is imo
Will grab it once one reaches ~120 on the used market
Thx
the southern mumble and coke nails....... 🤢
The Anbernic RG Slide goes on sale tonight at 3am PT for $179.99 for the first 72 hours (and $189.99 after). We have reviews publishing on both our website and youtube in the morning. Also, I hosted a livestream earlier today to answer various questions. 
Direct: https://rh-go.link/Anbernic-RG-Slide
AliExpress: https://rh-go.link/Anbernic-RG-Slide_AE
AliExpress Alt: https://rh-go.link/Anbernic-RG-Slide-alt_AE
https://www.youtube.com/live/BPUXsM5KvC8?si=pDA-o3dyU7o7zKH_
RG Slide Technical Specifications Color Black, White Screen 4.7-inch LTPS In-Cell display, OCA full lamination, multi-touch, 1280960 resolution, supports a maximum refresh rate of 120Hz. CPU Unisoc T820 processor, 6nm EUV 5G SOC chipocta core: 1[email protected] + 3[email protected] + 4[email protected] GPU Quad-core Mali-G57, 850MHz R
Stubbs and Andrew test various games on the Anbernic RG Slide and answer all your questions as you prepare to make the decision to pick this one up or not.Th...
huh 180 isnt horrible
190 isnt that far out from horrible either
given the 556 is 185 when not on sale
well played anbernic
well played
It sounds okay if you don't take into account the $15 shipping
kindda like you, but i don't like to sell my stuff 😅
Plus you also have to factor in the new custom screen
That isn't cheap
same as all their modern devices. no issue there
exactly. im pleasantly suprised
not gonna buy it tho
it should have been 16:9
It's live now on Ali
Ordered through geekbuying as worked out cheaper thanks to a code someone posted above
Sucks that we can't search in these channels anymore, at least not on mobile. Managed to scroll up enough to find the code you mentioned though
NNNAMARGNO
Hmm makes it £153.18 on GeekBuying. AliExpress after shipping and with a £20 coupon applied comes to £158.
Ali says it includes the VAT though. Do we know if GeekBuying does (or if they evade it by sending via 4PX or something)?
Ooh I made an account on GeekBuying and it's given me another ~£4 off
Another one thank you
Yeah I dunno we'll have to pay 20% VAT on receipt iif we order from GeekBuying though. I've searched and I can see on Reddit one person claiming no VAT to France 6 months ago, but one person from UK had to pay customs a year ago
So if we had to pay VAT that £150 is gonna be £180...
20% VAT it's depends on where you live really
Sorry I meant UK, I know you and I are both from there
And what customs that they had to pay
Yeah the reddit comment didn't say unfortunately, just that they're UK, I'm just assuming it's VAT
Last few things I bought through geekbuying never got taxed
So i am not worried
I bought things over £125 limit
I want to say they use 4px
I'm from London so I'm guess I'm fine when it comes to geekbuying or ail express
And it's free shipping
Yeah geekbuying is way to go for UK peeps
In fact it's 169.99 right now and ali express is 183.39
Ah nice one, cheers
On the other side of that coin. When i ordered 4x 34xxsp from AliE anbernic store. I got tax because they shipped using different provider over certain price limit
Is that with a case and/or microSD card? Just the console on its own is showing cheaper for me
I usually go no sd and put my own games on
Yeah it doesn't really say on the site... Do you know if that's what it usually says for shipping?
Yeah it wont say. But ive looked back. Last few things shipped via 4px
Which is known for no tax into uk
Cheers. Right, £149.45, I'mma do it
Hell yeah it is! 4PX my beloved lol
Good luck 💪
Think only time i paid tax from geekbuying was when I bought a GPD device for £100’s back in the day
We’re talking like £900 device.
So it got sent using a different provider
So for anyone interested, that's GeekBuying with code NNNAMARGNO and then, as it's the first time I've created an account with them, they gave me that extra "G Coins" discount
hi, do you know who the sender is for the anbernic site in Europe? in general there are customs fees?
geekbuying and gogamegeek are vat included, I don't know how they do it or if stuff gets smuggled in, but welp
Nope just console itself
Dark times
Not used the Anbernic site myself, but I've read many accounts of people in the EU and UK having to pay customs buying from them, same with Anbernic's eBay store too.
If you order from Anbernic's AliExpress store it will tell you if VAT is included or not, and will charge you the VAT at checkout if applicable; so no nasty surprises when you get your parcel.
okay thank you for your return, I do not know when it will be available on the aliexpress shop or if it will be more expensive, I think order on their site hoping not to have customs fees
Just to confirm. They already sent me a Evri tracking number 😅 guessing they must have stock before date they said. No movement though i guess till that day
Most of my 4px handovers go to Evri. So assume 4px again
It's on Ali now, there's links in here if you scroll up a bit
There's also GeekBuying which seems a bit cheaper, there's some coupon codes mention above too
Nice!
I just saw thank you, it's much more expensive on aliexpress so I'll stay on the anbernic site
There are also coupons for the summer sale so you can get it cheaper
But I can't find it on geekbuying
I was referring to Ali
Thank you! there may be some promo codes to use but it's still cheaper on the Anbernic site for me
I hope I don't have a customs fee, it's 4PX and I didn't have any fees with them when I ordered from Retroid Pocket so that was good news
for me definitely not cheaper from Anbernic directly
on aliexpress it is 300€ for the console with the sd 256gb card and the cover, on the website anbernic i paid for all this 250 (delivery included)
this is geekbuying for me
yeah, that's roughly what geekbuying should take, about 180+/-
I guess there isn't a better deal (for now)
probably for a while
but 180€ man 
with the Retroid stuff running about 200€, it's still a steep price in 2025
Weird I got it with coupons for about 180 euros and it was the same configuration on Ali
I can accept £140ish i paid. But yeah £160-£180 would have been a no no most likely
idk I tried again on geekbuying and the promo code doesn't even work I have 225€ without delivery (for the console with the sd 256gb card and the cover)
Yeah I can't complain about the price since I got it also with the bag and the 256 sd
yeah... AliExpress is out, Anbernics stores are still like "we ain't doing vat for stuff over 150€"... and with DHL collecting their fee and highway robbery at the door I will pass on this until it's below 150€ 😂
-30 € is the code from the sale?
-30€ for orders above 199€ yeah
the thing is the price adjustment is the vat you ain't pay upfront
so DHL will come after you, charge you vat and their "service" fee
so heck nope to that all, the price of the device needs to be below 150€ so vat is charged upfront and I don't get extorted at my front door
Said to myself that if it was under $200 delivered I could get one.
It aint on taobao yet 
geekbuying got you then
but I would be more tempted to klick that button if it was 15€ less 
honestly not the worst price, but ehhhh, last year I would have probably folded, but I will play the waiting game for now
yeah, same here...
I really love the idea of having this for playing Kaizo SMW on the go, this screen is super sexy for retro gaming. But I think I wanna wait for either a XX version of this, hopefully also slimmed down a bit. Either that, or wait for Anbernic to release more portable form-factors with this custom panel.
To be honest they did a decent job in thier first attempt
And patent expired tomorrow
Agreed
It's a neat, niche device with an interesting gimmick
But the screen!!
I'd instantly buy a horizontal or clamshell XX (H700) if they use this panel, genuinely
Actually gaming phones can finally have slide keypad controller
Arthur already has gears in motion i imagine 🤣
The screen is beautiful
Hell yeah, I can see getting a gaming phone using this mechanism as long as it's not too heavy
cause like my RG405M, it can be compact enough to be pocketable but if it's heavy it's not great for the real-world
That is very tempting
But anbernic rg slide having like 2010s lookalike phone I'm in love with it
I actually kinda like the option to put away controls and just use touchscreen.
Mini mini tab style
Would be great for some media consumption on a plane or car ride or whatever
Yepppp
Let's scroll up and predict what people are discussing today 😄
Spending money 🤣
I think the coolest thing i saw was Adin using it as an MP3 player/Spotify closed
while bitching at the price 😄
Deffo using this as an mp3 player
Geekbuying price is decent 😅
For once 🤣
🤣🤣🤣🤣🤣
oh i was talking about the others who complaining about it 😄
this does look fun as heck but i appreciate price point is a bit high 😄
So geek buying the way to go?
id say so esp for UK
Just ordered mine on AliExpress. It's eligible for the $20 off $100 and $40 off $200 coupons
So mine came out to $173 including shipping and taxes, not bad at all
Can't wait to see the massive screen in person
The RG Slide has now officially released, and it has a lot of fun and quirky features to it. Let's discuss why I love this bold new direction from Anbernic, and why it may not be a perfect fit for everyone.
Anbernic direct: https://tinyurl.com/RGCslide
AliExpress: https://s.click.aliexpress.com/e/_ol9PcZA
RG Slide impressions video: https://y...
No US stock on launch, or did it sell that fast?
Ooh battery life on the Slide's looking sweet in Russ' video
It's same battery life as rg406h
Never had any. It just released in China so I'm assuming the US stock hasn't arrived yet
Might be a bit depending on how sales go
Needed some cheap switch 2 accessories. So got the 40 off 200
atm i have 5.5 hours of time roughly split between 3X PSP, DS and gba on my 406h and im at 66 percent still 😄
same for my cube except for the psp. no 16x9 allowed
🤭🤭
Psp on rg cube is nasty work
Yeahhh I decided not to buy one
ok good, lol want to make sure I didn't over sleep a whole 2 hours
yeah it is, but screenhacked 1x gamecube is pretty great. the fuzzy pi4 lcd gives everything an antialiased look
Ok. Now I can actually publish my review.
https://youtu.be/xnZjJWjV-fQ
This is one quirky device. Is it the next best handheld for retro gaming? Is it too niche for it's own good?
If you're interested in picking one up, check it out here (affiliate link) to help me out:
https://bit.ly/RGSLIDE
00:00 - Intro
01:09 - Specs
03:01 - Colors and Case Accessory
03:45 - Price
04:53 - Device Tour
09:00 - Controls
11:5...
bro the moment anbernic puts this panel on a clamshell
my wallet is theirs
it's not happening though 💀
this is their answer for the clamshell universe
477h with small sticks and digital inline triggers pls ;))
477m probably means we are not getting an 477h
I would agree
I’m not really crazy for metal handhelds…
question to y'all: is it possible for other companies than anbernic, to use the Slide's panel? or do you think anbernic has exclusive rights to it?
you know what, I'd be satisfied if they do small sticks digital triggers on the 40xxh successor. with the 406h/v screen of course
if they dont, the 477h will have to be sacrificed
I'm glad the metal heads get their moment again but yeah, not for me either
Fair
me neither.. the 405M being metal worked against its pocketability/comfort as an edc, imo
thermals too, it felt warm
not like, dangerously hot but noticeable
I don’t understand why they didn’t use that screen in anything else as it was also nice.
Bought mine from AliExpress like two hours ago and it just shipped
I don't know what it says about the slide that people are not talking much about it the day the reviews went out 
Nope
It's custom
Hopefully they will do just that
Anytime soon
Finger crossed
Quite tempting summer sale plus additional 10€ discount when using Klarna as payment method.
140 euro sounds solid
Yeah. It's funny when retail price is discussed because it's almost instantly not 😆
Anbernic keeping my Legion Go 2 funds safe for now.
okay I caught up, BassDerek's is the best review so far
if you only have time to watch one, watch his
ya know, it probably gets warm in that spot because it's using a copper pipe instead of sink+blower directly over the processor
chances are it was a design change to keep heat away from the battery
watching the review now, great stuff
finally a reasonable take on ps2 that doesn't scream the sky is falling 😄
wait are they shipping today or just preorder?
What take can you possibly have on PS2 on a T820 that isn't "This will do a good portion of PS2 games with current emulators at 1x-1.5x ... with some able to be upscaled further and some of the more difficult-to-run titles struggling even at 1x. Tweaking will be required."? It's not like the performance on the Slide is some sort of mystery here. 🙃
generally i was poking fun at people who think that not being able to play ps2 at 2.5x-3x as equiv to warcrimes 😄
Probably shipping. Anbernic usually doesn't open up the sales until they're ready to start sending them out.
Someone should make a Slide with an N100 or N150 in it.
I think other companies can use but it takes a long time. Like nobody use Anbernic 4 inch screen until Helgaly pi. I think the reason Anbernic is big enough to order custom screens. Every else mostly takes left overs. As much as people hate Anbernic they are #1 in sales volume.
... could be Anbernic's next PC device.
Funny how often that is the take 😆
Well my other two slides are waiting to meet their baby brother 🤣😅
You like em? Been considering grabbing one but just not sure how useful the keyboards are. I do enjoy a good slide tho
I like them a lot. Thats why i have 2 😅 6800u (bazzite) and 7840u windows. Love my Win 4’s. Trust me the keyboard is super useful. Esp for windows. On my legion go and ally. Keyboard takes over screen and blocks content
Bigggg fan of slides
stop the presses! RG Slide is $160
https://www.reddit.com/r/crownpuffdeals/comments/1lg41s1/101_rg405m160_rg_slide201_rg557/
Yeah. Theres a ton of solid deals
Feel like when handheld makers drop during AliExpress sales, they always drop a little high
unavailable in UK for the rg slide, boo 😄
honestly it's all fun and games, but becomes quite stupid if you aren't on QWERTY layout... kinda ass they offer no different ones 
are you a dovrak guy
In fairness i’m not writing essays on this thing 😅 i usually only type the odd word or button when required. I do agree i wish there was a qwerty version. UK of course 😜
not trying to type an essay either, but even just typing in mail address and password is kind of a pain in the ass
German QWERTZ vs US QWERTY is a mess for pretty much all symbols 
170 usd is temptingg
Ok yes i can agree that is quite different 😅🤣
Even to a UK keyboard
this is better, can't trust google, why the fuck is @ on L there 
don't get me started about how even notebook manufacturers cheap out on proper ones all the time these days and just re-label the QWERTY layout badly, give me a proper enter key 
For fat European aristocrat fingers of course!
Hi everyone when will this be released on Amazon
when a reseller decides that a 50% mark-up seems juicy
Considering that the RG557 started to show up on around mid April on Amazon, I wouldn't be surprised if some resellers would sell the RG Slide on Amazon within mid July, early August.
Yeah. Always with a little markup, even if they end up shipping from China anyway
I just asked this question in the marketplace chat about 2 hrs ago only to get no answer and find it here.. lol
I got back $200 from a Amazon return that's got the RG Slides name on it.
For me the big screen and slide mechanism were enough to lock in my order.
I'm keen to see how the weight is balanced in my hands - I know it's a chunky boy.
The screen is really good, it's making it hard to go back to some of the other 4:3 options with the T820
Yeah. I've noticed I've slowly just been upgrading my screen sizes
Still want a miyoo flip mini for one hand play, but it'll be hard to go back to the other small stuff
You get older, you upgrade your screen size. Soon you'll be in Legion Go territory.
am i a 1 incher then?
tmi
It's def this i work with some younger devs who put their terminal at like 6pt font and I'm like, WTF are you doing
Stereotypical really
I'm watching reviews trying to find some redeeming qualities to salvage this
but nope, the slide is exactly what you would expect it to be
the only difference between reviews is how afraid the reviewer is to say it plainly
Is the problem basically that it's just too expensive for what it is?
the problem is that it's a brick, basically
Yeah but a brick is what some people want lmfao
ps2 is fine on t820.
you get some megadifficult games like SOul Caliber 3 that need 0/2 + framelimiter hacking, and if that ruins it for someone, maybe they don't need this device
People act like this chipset can't play ANY PS2 games just because it can't run everything.
Perhaps next year they'll release a revised Slide with 557 guts.
I want this form factor, but struggling to double dip on the t820 when it feels like they will most definitely replay this with a better chip and better screen.
I really want the asymmetrical vertical mode fixed in the next iteration. I know my brain wouldn’t deal well with that.
running most of PS2 at x1 is kinda miserable to be honest
Especially for a 960p screen it's just a bit disappointing
PS2 is not one of those systems that looks charming at original res
unless you dig the smeared vaseline look
Hmm, my gut is telling me that there might not be another 4:3 in this particular form factor especially with how many people are saying that they wish was 16:9. Think we have only like 3 or 4 high end 4:3 consoles that are currently out. Not including ayaneo since those are typically out people's budgets for a handheld typically.
Could be right there. I’ve been pretty happy with my cube now that gamma os is done.
Yeah we just gotta wait for the 477v with an 8 Gen 2 🙏
This is the first Anbernic with custom made 4:3 1280x960p 120 HZ screen, we will see it on many other of their handhelds by 2026
Im sure we'll see plenty of other handhelds with this custom screen. As long as there is enough supply and demand for these screens that might be enough for the rg slide to come full circle for 4:3 pro version.. my main concern is that i haven't witnessed any urgency for the past couple of years for a high end device with a 4:3 display. I guess we'll have to see.. I would say that there has to be some sort of demand for anbernic to make a custom 4:3 screen and other hand anbernic tends to make whatever they want regardless of customer feedback. @kindred timber
Are you serious!? I know this is about to be a rant but if I don't say anything here this is going to continue with the RG477M which most likely is going to have the same screen as the RG-Slide. You can't judge every Handheld based on Price to Performance Ratio's. This is a very narrow-minded metric for measuring the quality of every Handheld that comes out. This Metric makes it completely impossible to have feature rich Handhelds like the RG-Slide, RG557, and most likely the upcoming RG477M. For example the RG577 has an AMOLED, 256GB of Internal Storage, and WiFi 6 these things will drive up the price of any Handheld. Plus the reason people like me would rather buy a RG557 over a RP5 is simply the fact that the RG557 has more internal storage which is better for HD Texture Packs and Native Android Gaming. 128GB of Internal Storage doesn't cut it. Moving on to the RG-Slide, people in this community literally begged for a 5 inch 4:3 display. Anbernic went out of their way to contract BOE to custom make a 120hz 4.7 inch (almost 5 inch) 4:3 display. This not only makes the Handheld bigger and bulkier but it also raises the pricetag above other T820 devices. Sometimes innovation costs money and when you factor in the Screen (whether it be AMOLED or not), Controls, Battery, Cooling, WiFi, mechanisms like Sliding, Flipping, or Magnets, and even Build Materials like Metal costs money. Solely judging Handhelds based on Price to Performance Ratio's makes it virtually impossible to make feature rich Handhelds like the RG-Slide. I'm not saying you should never care about Price to Performance Ratio's but it definitely shouldn't be the only or primary metric when it comes to judging Handhelds.
Expecting a Handheld with a custom made 120hz screen and a sliding mechanism to cost under $180 is childish. I'm sorry but the trend of solely judging every Handheld based on Price to Performance Ratio's needs to die. It is holding the hobby back from true innovation to maintain many of the Backwards, Narrow-minded, and sadly Child-like standards since we held since 2018. I want to add two more things. First off for people complaining that this Handheld doesn't have a SIM card slot you need to understand that this alone could potentially double the price for any Android Gaming device. Secondly 16:9 is a terrible resolution for Retro Gaming many of us don't want Black Bars when playing NES, SNES, or Genesis Emulation. If you want a 16:9 Sliding Screen Handheld go beg Retroid or Ayn for one. Not every company should have to completely adhere to Modern Gaming standards.
TL;DR
You can't judge every Handheld solely based on Price to Performance Ratio's, and sometimes innovation costs money.
sure i can
that said, 190 is probly a good price for THIS, as its a unique design
id still rather buy the cheaper ones personally
i thikn everyone should keep price to performance in mind
otherwise we would all be wasting money on ayaneos all the time
It's great that anbernic innovated both with the screen and form factor
But if something costs that much and you can't play the games you want on it, why would you want to pay the price?
The price they're charging is absolutely valid for the components and design they got
But as a consumer? It's still just another T820 that won't give you the full library of 4:3 consoles without many compromises
If they put in a more capable chip and it cost even more, it would be a lot more appealing even if the price is high.
I strongly believe the D1100 would have been a perfect match for it, because then you could really make the most out of the giant 4:3 screen.
Yeah the 1100 would have been great here
Exactly, I would gladly pay a little extra for a d1100. The way this currently is just okay, but it really could've been a lot better. It's not an especially comfortable handheld, nor is it super pocketable or that performant. It's kind of in a no mans zone atm.
And I think a lot of the reason people are bringing attention to the price to performance is that, given its dimensions, the main sliding feature doesn't actually add a whole lot, as it's still quite large and a lot of people wanted a slide handheld for its smaller size. So essentially what you have is a slightly more expensive T820 with what is admittedly a better screen, however, that same screen alone isn't a selling point since it's going to be used in future handhelds. Personally, I think I could still reasonably pocket this so the size isn't a complete deal breaker for me but I get where they're coming from.
My point is it shouldn't be the ONLY metric when talking about Handhelds. Most people in this community don't factor in the overall experience with these Handhelds.
I also would have loved to see a stronger chip in this Handheld. But that would have made this Handheld at least $230 if not $250 dollars. Pricing it on par with the RG557. Then you'd probably hear complaints that the Handheld can't do Switch or Wii U Emulation like the Odin 2 Portal. The glass is always half empty in this community.
Plus people asking for a SIM card tray would have at least doubled the price to this device.
"this can't play full psp/n64" (rg505/405 appears)
"this can't play full ps2/gc" (rg556/cube/406 appears)
"this can't play full ps2/gc without hacks" (rg557 appears)
"this costs too much and I'm tired of slabhelds" (rgSlide appears)
"I hate you anbernic! I said this can't play full ps2/gc without hacks!"
Lot of little venting people in here huh
People that even don't give interest on product but here to bash these concstructors... without even enjoying instead of complaining (personnally I love my RG556 with joystick default)
You forgot to add "This can't emulate Wii U and Nintendo Switch!"
@kindred timber Like I always say according to people like this the Glass is either half empty or half full.
this device slides too much
people are whiny folks who are spoiled by choice now 😄

I'm guessing that's Amazon.
yeah lmao
I expected better from the good people at GiipGoop
I'm seeing a lot of complaining and a lot of complaining of peeps complaining
and here I am complaining about peeps complaining about peeps complaining 
ok, but... it's still a brick 
This could be a sign for some to touch grass 🤔
||should've had a d1100 tbh||
Because why is there no middle ground between a t820 and d8300 lol
