#GameMT E6 Max
1470 messages · Page 2 of 2 (latest)
Throw an A75/76 core or two in there and the PS2 ver should run close to full speed
a733 version eventually lol
following just to get updated examples of this chips performance. not really eying this specifically, more interested in the rgb50 for the screen cuz the only 3:2 device i have rn sucks
Same with BG Dark Alliance which is crazy as its normally so hard to emulate (It has issues even on RP5 )
there are a lot of android games on my e6 plus that i won't bother putting on this device
definitely will add DQB, Nuclear Throne, Death Road to Canada, and Slay the Spire... maybe the Risk of Rain og port
Diet Melee, XIII, Worms 3d, and Prince of Persia will be on the test list next. I did Pikmin already for jdewitz. i'll record the first boss fight later
i dont know why but i feel e6max will run even better ps2 MW2005 than t618, already wasted 2 days and total do almost stable 20fps lock x1, have a cpu bottleneck issues -_- (graphics defoult optimised still)
the only version of Most Wanted 2005 and Underground 2 that are playable on t618 are the gamecube versions.
g.c working yes, but it too easy
I don't trust either on this because as gamma said, the gpu isn't that great. it might be running underspec due to the 5.x BSP kernel
NetherSX2 Experimental even better btw
today installed, and finaly a bit understand what game need to run well on low-end chipset
where he sayed that, cant find
#1347046772698124361 message
you were part of this discussion
oh, u mean that
maybe, maybe ...
I've managed to make gpu issues slightly more invisible by toggling VBI Skip.
i hope he find a way to make it faster
basically keeps low fps from triggering stuttered audio. that way if something dips from 30 to 28 or from 50 to 45, gameplay still feels smooth
well I've OC'd the unit slightly via the DTB
lets see if it actually is taking effect or not
before:
generic_arm64:/sys/devices/system/cpu/cpufreq # cat policy0/scaling_available_frequencies
408000 672000 792000 936000 1032000 1128000 1224000 1320000 1416000
generic_arm64:/sys/class/devfreq/1800000.gpu # cat cur_freq
744000000
after:
generic_arm64:/sys/devices/system/cpu/cpufreq # cat policy0/scaling_available_frequencies
408000 672000 792000 936000 1032000 1128000 1224000 1320000 1416000 1500000
generic_arm64:/sys/class/devfreq/1800000.gpu # cat cur_freq
792000000
this device doesn't have bluetooth?
nope. sure doesn't. that was something sinyorksu mentioned earlier on.
a 2.4ghz mouse/keyboard is okay if clunky
I'm just poking about, trying to see if there is some bandwidth being starved between gpu/cpu
should be stock for 4x
i meant in terms of mhz etc
e.g on the t618, it's typically 1866mhz
ok the slight OC worked.
yesterday before OC: https://browser.geekbench.com/v6/compute/4022975
today: https://browser.geekbench.com/v6/compute/4029816
Benchmark results for an unknown TrebleDroid vanilla with an ARM ARMv8 processor.
Benchmark results for an unknown AOSP TV on ARM64 with an ARM ARMv8 processor.
I suspect I could push 850mhz on GPU if it's similar to the rk3566's mali-g52
was there pictures of the mobo for this unit with the ram chip visible?
so we can grab the model number and verify
why they dont post at least datasheet ... for this a527 bruh
oh so this is running nerfed
yup
nope, ppls who already teardown it, dont see what exact chip used
for whatever reason, i can't transfer files via usb cable after the flash to basic android. might be fine in linux, but windows.... nope
i'll bug sinyorksu about it after i send him some controller configs later. glad he fixed volume
generic_arm64:/sys/class/devfreq/1800000.gpu # cat cur_freq
850000000
generic_arm64:/sys/devices/system/cpu/cpufreq # cat policy0/scaling_available_frequencies
408000 672000 792000 936000 1032000 1128000 1224000 1320000 1416000 1500000 1584000
generic_arm64:/sys/devices/system/cpu/cpufreq # cat policy0/scaling_cur_freq
1584000
#mod-it-till-it-breaks
speedrun: making my e6max toast
I'm using the same voltage though, it seems to be holding up
I've not OV/UV yet
#push-to-the-limit
I actually think 850mhz is supposed to be the GPU base clock speed btw
like t618 yeh
can you churn out another basic android distro with these changes?
somone sayed it can even 950mhz (G57) without oc, so chip is not weak that much could be, if vendor not limit it
yeah that's doable
i'll mirror-host it
it'd just be flashing over stock using fastboot, would require bootloader unlock and flashing vendor_boot
sound easy
we have the phoenix flashing tool too. does a live update
experimental 850mhz OC.
ensure bootloader is unlocked first (enable dev settings, unlock bootloader, adb reboot bootloader, fastboot oem unlock, fastboot reboot)
then flash using fastboot (adb reboot fastboot, fastboot flash vendor_boot vendor_boot.img.signed)
there may be some other changes for GammaOS but should still work with stock
stock vendor_boot
wonder if cpu possible to oc too
yes I did it
benchmarked?
anyway, looking at the mali speeds, 850mhz is the actual speed IMO:
https://gadgetversus.com/graphics-card/arm-mali-g57-specs/
so we're not really OCing that, just bringing it to normal operating speeds
ARM Mali-G57 graphics cards benchmarks and specs, with the respective number of execution units, shading units, cache, memory, the power consumption, the ge...
stock had this at 744mhz
currently benchmarking gpu
Benchmark results for an unknown AOSP TV on ARM64 with an ARM ARMv8 processor.
yikes
13% gain
some of G57-MP2 use 950mhz (its a bit diferent chip) but architecture the same
I'm looking at this for CPU, I think we could push the big cores to 2.14ghz: https://browser.geekbench.com/v6/cpu/11568752
Benchmark results for a Fusiontech MBX-A527 with an ARM ARMv8 processor.
will try that
currently capped to 2ghz on stock
150mhz will change everything ...
u tried with ov?
or just stock voltage
dietmelee = crash. can't enter 1p mode
would not recommend overclocking CPU, I think I'm hitting thermal throttling, getting lower results than stock
i figured that would happen, especially with no good heatsink/spreader-plate, vent, or microfan
22nm definitely keeps your hands warm. tablets usually have ~8in. of aluminum to manage the heat distro
Eh
GPU 850mhz with no CPU OC (previous one has a slight OC).
anyway will take a further look later, I really want to understand the memory clock a bit better
Oh damn
this is everyone's suggestion to just play the psp versions of the Prince of Persia Trilogy. Playable with hacks, but just not a smooth experience.
https://streamable.com/rfefnp
Ayy nice GPU overclock
Permanent bullet-time 
You done anything with the little cores again?
The ones that run at 1.4ghz by default
the bullet time just like... sneaks up on you? maybe it's throttling? maybe its too much? maybe the game is broken? lol
If not then tbh GPU/memory overclock will be the only other option for perfmaxxing
I pushed the little cores to 1.5ghz and the big cores to 2.1ghz, but ended up with a toasty device and poorer scores, this thing needs a fan haha
We'll probably benefit from undervolting
Ahh meant the little cores by themselves
Leaving the big cores at 2ghz
That'll do the trick
I could try that yes
1.4/2 seems to be the best setting without raspberry pi heatsinks
Could do 2.0/1.5 with little thermal compromise
Maybe 2.1/1.5 with undervolting and some generousity
there -are- heatvents, so it to might work
oh man. lego star wars is -great-. mostly playable even. i'll record something later. off to work now
@viscid gorge could you try Geekbench and let me know how your scores look for CPU?
Tbh Gamma Core is what this device yearns for
linux for that not bad device is nerf 🤨 (bc it can run G.C / low demanding ps2 and andoid stuff)
Midnight Club 3 PSP should run decent on this
Runs at ~30-45fps on the TSP
It's a 222mhz game but a heavier one at that, TSP seems to be GPU bottlenecked with that one
huh, its like japan vice city?
which utilize max gpu frequency 333mhz
oh
@mossy heath #1347046772698124361 message
I believe it was @viscid gorge who noticed that the physical connection to the RAM is only half of what it could be.
hey Gamma what's the question on the RAM?
i'm fairly certain there is 1x 200BGA LPDDR4 (or 4x) chip on the board
what exact frequency it run
cheers guys
welcome back
yeah I just wanted to know what speed the controller freq runs at, and the rated speed for the ddr module
so 1.2ghz
not the fastest
amazing!
it cant be 1200, dont believe in that low ... 1600 at least
i'm surprised it's that high
ddr4x T618 in handhelds 1866mhz
why there no scripts to check 😦
this is not t618 level, nowhere near, sorry to burst your bubble
dmc freq is not exposed in /sys either so it's not clearly visible, probably some mem training done in SPL
Eh, maybe ... maybe
i actually wouldn't be surprised if it's running at 1066 just out of laziness
Blast from the past, the x28 is the only t618 I worked with that only did 1024mhz mem speed, while the others did 1866mhz. 😅
yeah see my post above
that action π (another a527 console)
generic_arm64:/sys/devices/platform/soc@3000000/1800000.gpu/devfreq/1800000.gpu # cat cur_freq
900000000
generic_arm64:/sys/devices/system/cpu/cpufreq/policy4 # cat scaling_cur_freq
2100000
YOLO
O_O 900mhz
Yeah, i see it before, 527 support allot types of ram (sadly)
.
also 4GB limit 😢
maybe bc it has lpddr3?
when other lpddr4x
900mhz with slight UV: https://browser.geekbench.com/v6/compute/4030872
Benchmark results for an unknown AOSP TV on ARM64 with an ARM ARMv8 processor.
so gpu like minimum 30% slower to T618 (1820MHZ) avg 40% (2002MHZ)
😲 why that big gap
different class of chip
Benchmark results for an unknown Anbernic RG405V with an ARM Unisoc processor.
mine
why that low 🤨 (gamma os)
How's heat
Damn
Benchmark results for an unknown Anbernic RG405V with an ARM Unisoc processor.
how much possible get more with overclock?
You're comparing against a t618, that's much more powerful. No amount of overclock will ever reach that level.
no no, im not comparing ... im asking how much i can get more on my T618 (not enough for ps2 heavy)
t618 cannot be overclocked
yes
no, I am done with overclocking now
so atm u trying to do stable uv
I'm bored now, going back to GammaOS development 🙂
condition atm - 20% difference (i hope real to do 10-15) vs T610 in gpu performance, pretty solid
also interesting limits for ram
@mossy heath btw remembered what app can see ram frequency in real time, SCENE (root)
Fuck that's slow
@mossy heath just realized console turn off with 66%, if turn it on after minute it will down again (so its definitely battery low) , when plug charger it start from 66% to 100% could be gamma glitch? tried unplag battery for 10m already, still
sure
Because there is no cooling fan, we limit the performance of the chip, otherwise it might explode. Hahahaha
reminds me of amlogic/hardkernel bs
same happened to the OGU. it could perform better, but it meant literally melting the soc
Conflict: Desert Storm, Judge Dredd, and Worms 3d are all decenlty playable:
#1340711956495077497 message
V-Rally 3 and XIII also run pretty well
Benchmark results for an unknown AOSP TV on ARM64 with an ARM ARMv8 processor.
And this was the best I could get in terms of CPU
https://browser.geekbench.com/v6/cpu/11580588
Benchmark results for an unknown AOSP TV on ARM64 with an ARM ARMv8 processor.
Wow
What ram speed exact? And type
Also what the max for that chip with active cooling?
hm 🤨 i just unplug battery for 8hours, and it still show 66% when turn on, but it doesnt off, already 3 times run geekbench 6, and now wild life extreme stress test (59% atm) seems like glitch gone (RG405 GammaOS)
hm just unplugged the battery for 8 hours, and it still shows 66% when turned on, but it doesnt off, already 3 times running geek bench 6, and now the Wild Life Extreme Stress Test (59% atm) seems like the glitch gone (RG405 GammaOS) why it happened with handheld consoles? (i know many cases like that, even on stock firmware)
well, well, well (fan max mode)
This thing is a tweakzilla
can u try dolphin mmjr vbi MW2005? 😀
Lemme see if I have that rom
Keep dreaming
T618 barely manages that
Oo, that'd probably run with PsiDozer's changes
о_О lol?
As in 55% underclock, VI skip enabled and GPU sync off
t618 do 40-45 mine
Huh
settings is everything for low end devices ''mtk'' (defoult just on good devices work fine)
A527 would be lucky to manage 25. NFSMW is on the higher end of GCN fwiw
sceptic
lets hope
interesting is it possible to do 1ghz on 527, or not bc will overheat
925mhz already more than i predict, and even cpu goes up insane too (but i want to know limits)
Ps2 klonoa is hard to run even on t618
@finite haven fast basic "now" settings, dont remember full what i put before, so its not max stable as can be on that t618
RG405V
I have an rg405v. with the fan off, it averages 21.4fps in nfs:mw(pal) for gamecube. with the fan on, it averages ~22-23fps.
there's no way you're going to make the a527 push 30fps without melting it.
Avg 25-30 (ofc with 1% drops to 20) in chase, but i remember better results on my tablet some years ago (need to test some settings)
RG405V, mmjr2 vbi
mmjr2 (vbi) also seems still lose (HOW?) to port ishiiruka (the real v6) in performance and stability (first impressions, could be wrong)
upd: just confirmed, it much and much better
ishiiruka V6 / career start
RG405V (T618) Gamma OS
Ignore the last link I posted. Sinyorksu being dumb
Ok
okay upload of 1.09(clean) is going back up.
version 1.12 of the clean firmware is up now. you should be able to flash it over your current android as a live update
@mossy heath u done with it, or just on pause? (when 1ghz?))
@viscid gorge Could you please send the link to v.1.12?
Some footage of the E6 Max running yesterdays released Delta Force Mobile! It's a very interesting game featuring a 24 vs 24 pvp warfare mode ("We've got battlefield at home") with big maps and vehicles. On top of that it features an extraction shooter mode called "Operations" ("We've got Escape from tarkov at home"). The mobile version of the game just released and is still buggy and not entirely optimised. So keep in mind when reviewing the E6 Max's performance here.
I have been playing Delta Force on pc lately and having an absolute blast! Can absolutely recommend if you enjoy extraction/battle royale shooters or battlefield!
Ps. If anyone feels like doing some raids in Delta Force, add me in-game @ MchineGunDemma
https://youtu.be/UcV4Gzumgxs
E6 Max | Android 13 | Delta Force Mobile (24 vs 24 Warfare)
Check the pins
the fact that this consumes 1w when idle and 9w when at max tilt is why i turn it off when i'm not actively using it these days.
Gamma needs to save us with that passive MUNCHING
yeah idle/max power draw is almost rg552 bad
YIKES
likewise, the screen is pretty great and the buttons/body feel good in the hands. it's a neat device
Yeah, I have ran into the battery being flat-out empty after leaving the device in sleep. Not very good for the batteries lifecycle.
on pause, working on other stuff at the moment
well, its ''playable'' (first try on Erl) never before try it (game) with less than 100+ fps (except when was child, once complete MW on ps2)
avg 25-30fps a bit
(wonder how E6Max with OC to 950mhz will perform, wish somone try!)
T612, DXVK: 1.7.2, Winlator10 dev3, Vortek, gpu A527 should be around with overclock (somone try!) im atm run it on T618
use the new clean android can solve this problem and if you open the save battery mode can get more using time
i'm using it. 1.12p is much better
unit's been asleep for a few days and not moving much percent-wise.
Just updated today, had some trouble applying the update at first.
You'll find that the gamecube version struggled to hit 30 on og hardware, seems to hover in the low-mid 20s most of the time, high 20s in open areas
Can drop as low as 15 at times
nope
didnt installed on 406 yet, trying to configurate ps2 version :/
@daring valley add some cpu governor options
running cpu-x, it looks like all cores idle at 408mhz. i wonder if it can go lower
From other allwinner chips (A33, S3) I've tested they can go down as low as 60mhz
The A133P can only go down to 408mhz
why that high?
i guess the a527 and a523 inherits the 408mhz low spot
that's why we get such a large passive drain
so the one solution is turning off, sad
https://linux-sunxi.org/images/8/82/A527_Datasheet_V0.93.pdf
going by the official document, that isn't mentioned. but the ram clocks gamma mentioned are there. it only supports a max clock of 1200mhz for dd4 and 1000 for ddr3
wow a527 sheet 
isnt Gamma confirm that?
i only remember he sayed t618 X28 on ddr3(pretty-sure) wont goes above 1028* but they mark it like ddr4x (1866 should be) this why x28 not perform like others
i read through chat earlier while messing around in adb. its all there
🤔
just an interesting find before i head off to work.
Has anyone tried to use it for cloud based gaming yet? Love the stick locations and thought it would nice if so.
I can guarantee you it will pass any cloud streaming test you throw at it. To be honest.. it's older brother the E6 Plus with a weaker chipset was already a very good but overlooked cloud gaming device. I used mine with Luna and Moonlight/Artemis without any issues. The E6 Max can only improve upon this since it's significantly more powerful.
I gotcha. Most of these “budget” handhelds you can use the built in controller due to some reason. I got the x28 because I liked the sleek look and I do a bunch of cloud gaming and I have to pair a controller to it to use it that way.
Try some ge force now and let me know before I buy one lol 😂
Thanks, but not using cloud gaming at all
I just wanna know if the buttons and triggers work with them. That’s really all. I don’t wanna purchase it and it not work for what I want it to do.
If not, I totally gotcha
Great Purchase and Great Color Choice. 👍
Could you see if it works with cloud based gaming? Like the controls actually work.
Yeah, I know that update for v1.12 is available:)
#1347046772698124361 message
But just out of the box it's v1.10
Thanks! 😊
It's actually looks more like grey color, than black
Dpad is greatly improved, compared to previous e6plus, and overall build quality is much better👍
Imho, in their next consoles they need to get rid of that wide black border on screen, to make it look more premium, like on RP5 
Can someone test Tekken Tag 1 and killer instinct in mame?
I like the mini steam deck vibe.
congrats and welcome to the pack
Thanks! 😊
go ahead and flash 1.12p if you haven't already
how does everyone feel about the panel? it's quite crisp for just being a laminated TFT or whatever
That's what I'm doing now:)
Don't have e6plus anymore to compare screen, sorry, and can't say that it's very bright, for tft maybe it's ok, but we are all already spoiled by oled screens ❤️🔥
Updated to v1.12, all good👍
excellent
I really hope someone try’s out and sees if I can play cloud based games via the handheld controls. Really want to get this but don’t want to get it and be wrong.
Super nice screen
Never seen that game before
Streets of Rage 4, its available also on Android, awesome game
Playable on mini28 with ultra settings as well, but fails to load after menu on tsp gamma - 1gb of ram is not enough after all for this game 😅
Also runs very well on RG353V with GammaOS 😄 and even though teh 16:9 screen is super tiny on it I would still say its very much playable 😄
it's also something I would like to know, I think Gamma will be porting Core to it so for sure it should be possible with that 🙂
I guess I will just wait a little bit and get it. To make sure. I wanted to try and beat the tariffs but it’s looking like imma be paying premium
Stock OS, NetherSX 1.9, Vulkan rendering X2 psp, uc/cskip on, 100% full speed, no any drops to red framecounter 🔥
To request more videos with gameplay from various handhelds please subscribe my YouTube channel and follow this link for some coffee :))
For latest news and discussion please join
Retro Handhelds...
wonder how it will be with gamma 925mhz
Itv will definitely add some of speed and performance 😅
should be
how to do this? im on 1.9 still and phoenix suit acts like its connected and begins to upgrade firmware but then it just reboots quickly
it tries to fail and do weird stuff, but eventually works
can it be flashed using local update? or only with phoenixsuit
yep! i got the same
same here!
aaaah so tempted to get one to replace my x55, the price and the lack of linux is still holding me back 💀
linux is coming now that the helegaly is in several people's hands
now what's holding me back? 😩
Honestly, i was happy with just the e6plus, but i got a max to support sinyorksu
it's better if you could support Hack Around too
is he making a handheld?
He made fw for GameMT for previous consoles
it'll be nice to see what linux firmware comes of his efforts
Can comfirm RB6 Smol and Nuclear Throne both take good adventage of the screenmapper. I really want to see how well Pascal's Wager plays
From what I know, it's very tricky to completely dowload extra data for first run of pw.
Not tried it yet in person😅
oof
Linux is available?
Not yet
batocera exists in a usable form on a527. it just isn't tailored to this system yet. that would be Hackaround's playground
time to test DS again after acquiring an arm64/8a apk
Helegaly will be the name of my next cat
Finally got DS running and it's GLORIOUS
here's the last official, I think, before the author pulled it from playstore
He is currently working on bringing Linux to E6 Max
I know it already from last October 😉
TIME TO GO
https://ctgp-7.github.io/
People really like MK7 huh
5: double-dash and 6:wii both had huge mapping communities as well. Double-dash plus has like 80 maps?
@daring valley
also, add this to your persistently growing fat firmware
#1347046772698124361 message
https://youtu.be/7PmGT1MCwtc?t=391
took me a while to get the hang of the controls and to remember combo timings
just a quick look at the smooth goodness of nintendo DS on this cute little device.
aaaah, with linux coming for it as well it's increasingly hard to hold off on buying one lol
powkiddy rgb50 is a mystery, helegaly/kinhank k56/k560 is more expensive, anbernic is still married to the H700
https://s.click.aliexpress.com/e/_mPv9QIr
does anyone know this store?
I didn't find the listing from your store, maybe you're not shipping to brazil?
Action P can wait for 60$
yeah, it's very cute but I'm not interested on a 4:3 rn
the one that kinhank bought from them, k56, is more what I'm looking for
just buy used 505
but very few stores are shipping to brazil and it's quite a bit more expensive
I had one, great device, awesome battery 🙂
so u just want test new soc
no, I'm looking for a stronger widescreen linux device to replace the x55 I've been using
oh
that's why I'm drooling over this and the supposedly upcoming rgb50
alright, wish me luck
the e6 max? idk, around 80 usd is the best I've found so far
the rest are import taxes
Yeah, this is a phone+controller market
Basically, a pixel 3 and a controller will cost the same as thiis due to tariffs
haven't seen anyone testing streaming like artemis and pxplay on this, with this wifi 6 it should be a great streaming device
Would be cool to see if they could put a mouse and keyboard on it too and play some g-force now.
My E6 MAX arrived! Here's a comparsion to a pixel 3 with BSP-D8, and my trimui smart pro
congratulations!!!!
They have yet to ship mine
and I'm still not sure which color I like the most 😍
If you brought it on AliExpress you might not get it.
oh, where did you buy it from?
I tried to get it from AliExpress
The seller never shipped it. This was before the tariffs
I've bought it from 2 Aliexpress stores, both swore they'll eventually deliver
My plan is to either sell the other or to cancel one when the other store ships
The seller gave me a bogus usps tracking number
oof
It never went to customs.
it'd be really sad if they did this, when buying from brazil the taxes are paid in full to Aliexpress, so I'd lose that money
where did you get it from after all?
I screwed up because I should’ve looked up when store was established. I don’t have one. I tried before the tariffs.
oh we've had tariffs here for a while now, it's not new unfortunately
They had stopped shipping from China at one point.
many Aliexpress stores won't ship here even after tariffs stuff got sorted out btw, so maybe you can expect that as well
for example, @daring valley 's store says it won't ship as well
I think it's all taking a while to get sorted out but everything should work eventually 🙂
can u do some benchmarks?
geekbench6 (cpu/vulcan/opengl)
It is estimated that there will be a large amount of stock on the 20th of this month. And a Bluetooth version has been added.
will your store ship to brazil as well when you have stock?
yes
but you know the tax is very high
I know, it's very sad.. but it is what it is, with coupons, coins, etc it can be manageable for things up to ~70, 80 usd
at least when tax is paid in Aliexpress it doesn't get stuck in customs hell and arrives fairly quickly, I think about it as... expensive shipping 
Genshit
legalized underage gambling
why u torture this thing?
Can it play Genshin? Yes it can!! 🚀 😁
Finally people got 70$ console to play Genshin! 
Enjoy! 😉
Yes it can!!! 🤩🔥👍😄
To request more videos with gameplay from various handhelds please subscribe my YouTube channel and follow this link for some coffee :))
For latest news and discussion please join
Retro Handhelds Discord Server :
https://discord.gg/retrohandhelds
Or
Retro Game Handhelds Disco...
Would've tried ZZZ; that game brought my S21+ to my knees!
I've been seeing more stores with stock lately, the one I've bought just shipped
there's a 10 usd off coupon plus 15% off with coins:
https://s.click.aliexpress.com/e/_mL5uSmj
This one's on Choice, so even safer:
https://s.click.aliexpress.com/e/_mrGI9bp
Can this run Mario Sunshine
Probably not, but I'm not sure
Not a chance in hell
This could potentially do very light GCN, but Sunshine doesn't fall under that
Zang
Feel like for Sunshine, you might be looking at the RG406V/H, at minimum
The tech just hasn't come far enough for GCN to be playable at this price point just yet
No, but it can play genshin 😆
Would the gkd little be able to instead
I think it's the same chipset, so no
Plus, we've gotten nothing but radio silence on the GKD Little since its initial announcement
Hard to say whether or not it'll even come out
comparative rules of thumb:
- if t618 devices can't or struggles to run something, the a527 will not run it
- if the rk3566 struggled running it, it will run fine
So if you're like "I really like Volleball Spikers on GCN but it doesn't run well on my rg505..." NO, it will not work on the e6max.
Genshit with psp graphics yes
Better off buying a used SD855 phone and mating it to a telescopic controller if for whatever reason you wanted to play that garbage
I think Cobalt might secretly harbour a slight dislike for Genshin Impact, you guys
Death jr 2 for PSP struggled to run on 3566 devices can someone check if it runs on the e6 max
^~^ it's a childhood classic
he might just be neutral, best not to jump to conclusions
Understandable ngl
Gacha games are a plague upon the mobile gaming market
Felt
It's a sweet dream to have psp gfx like genshin
bless sinyorksu and his microbatches lol
aah you're still not shipping to brazil 😦
I've bought from Shine 3C Store, they sent it yesterday, let's wait to see when it comes
same here!
I'd like to share his store in brazilian discord servers though, I'm a mod in one, it's good to list the official sources 🙂
Received console from that store, all good👍
So which on plays Genshin better ? The E6 Max or Kinghank ?
definitely kinhank k56
Thanks and that's what I figured , my younger cousin is looking for something cheap to play it on
Anything else for around $100 that's better ?
oh well... I'd actually recommend spending a little more to ensure having a good time
but I haven't been testing these on the cheaper hhds
like at least one of anbernic's t820? like the rg556?
Anyone try Xbox game pass with it? And does it connect to a monitor?
used t820, g99 handheld if extremely lucky 845
rg505 is 107usd right now
my only other suggestion would be find a used 8th gen laptop for cheap or a phone+controller
hello! do you know how/where to follow and support what he does?
btw, isn't it time for this to be moved to #1345623875572072518 ?
yeah, @abstract trout this is released and in the public. it needs to be moved, even if it's just being distro'd in microbatches
